JMJayishni Maharaj

Jayishni Maharaj

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Jayishni Maharaj has a total of 114 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Evaluation of Dynamic Anatomical Ultrasonography for Tracking Layer‐Thickness Changes in Residuum‐Inspired Mechano‐Acoustic Phantoms

    by Alireza Y. Bavil, Christian Langton, Nataliya Perevoshchikova, Jayishni Maharaj, Rod Barrett, David Lloyd, Stefanie Feih, Laurent Frossard

    Assessing ultrasound measurements in deforming soft tissues requires material platforms that reproduce both acoustic and mechanical behavior under load. This study developed multilayer mechano‐acoustic phantoms to evaluate Dynamic Anatomical Ultrasonography (DAU) for assessing deformation of internal soft‐tissue layers, with application to the residuum of people with limb loss. Silicone‐based tissue‐mimicking materials representing skin, adipose, and muscle were acoustically characterized and assembled into phantoms with and without Nylon‐12 interlayers. The phantoms were tested under uniaxial compression with synchronized DAU, force, and video recordings, and represented by finite element (FE) models mechanically calibrated using reaction forces and external thickness changes. Minimal acoustic contrast between silicone layers limited interface detectability, whereas incorporation of interlayers improved tracking. FE models in both phantom configurations showed that surface tracking was a poor proxy for internal layer‐thickness changes. Across layers, mean absolute errors between DAU‐derived and FE‐predicted thickness reductions ranged from 0.015 to 0.17 mm in the phantom with interlayers and from 0.032 to 0.37 mm in the phantom without interlayers. These findings establish a framework for model‐referenced evaluation of DAU in multilayer soft‐tissue systems and support future in‐vitro and in ‐ vivo studies relevant to residuum assessment and prosthetic socket design.

  • A Structured Program Effectively Improves Mentoring Skills and Confidence, and Increases Social Capital of Early-Mid Career Women in STEM

    by Laura E. Diamond, Manuela Besomi, Karen J. Mickle, Madeleine Galen Mitchell, Martina Barzan, Taylor J.M. Dick, Michelle Hall, Crystal O. Kean, Celeste E. Coltman, Jayishni N. Maharaj

    Despite efforts to achieve gender equity in science, technology, engineering, and mathematics (STEM), women remain underrepresented particularly in academic leadership roles. Structured programs targeting mentoring and professional connections may strengthen mentoring skills, confidence, and social capital. This mixed-methods study evaluated the mentor component of the Biomechanics Research and Innovation Challenge program. Sixteen early-mid career women mentors completed preprogram and postprogram surveys, and 14 participated in interviews. Participants reported increased self-perceived mentoring skills (81.3%–93.8%) and confidence (75%–93.8%). Over half (56.3%) reported expanded professional networks. Thematic analysis identified 4 key themes: mentor attributes and skills, program structure and support, motivations for participation, and delivery challenges. Program structure, peer support, and training facilitated mentoring effectiveness, while time commitment and logistical barriers presented challenges. These findings demonstrate that structured mentoring programs can enhance mentoring skills, confidence, and professional networking among early-mid career women in biomechanics, highlighting their potential role in supporting career development and improving retention of women in STEM.

  • A Mixed-Methods Exploration Into the Experiences of High School Girls Participating in a 100-Day Biomechanics-Based Mentoring Program

    by Crystal O. Kean, Manuela Besomi, Martina Barzan, Laura E. Diamond, Taylor J.M. Dick, Michelle Hall, Jayishini N. Maharaj, Karen J. Mickle, Celeste E. Coltman

    This study implemented a mixed-method design (postprogram survey and structured interviews) to develop a detailed understanding of mentee experiences in the Biomechanics Research and Innovation Challenge. Forty-nine mentees completed the postprogram survey, and 26 mentees participated in the interview. Based on the survey results, 65% of mentees enjoyed the university campus experience, and 63% valued the networking opportunities. Learning about the research process and different careers in science and biomechanics were appreciated by 63% and 61%, respectively. Over 90% of mentees responded positively to statements about their mentors’ suitability for the Biomechanics Research and Innovation Challenge, supportiveness, and availability, and 85% of mentees would recommend the program to their peers. The interviews revealed 4 key themes: developing Science, Technology, Engineering and Math (STEM) skills; discovering biomechanics; STEM role models; and facilitators and barriers to participation. Furthermore, the interviews highlighted the development of essential STEM skills, exposure to biomechanics, and the positive impact of mentors. The program’s hands-on and collaborative nature facilitated participation, whereas communication tools and scheduling were barriers. Our findings highlight the positive mentee experiences related to participation in the Biomechanics Research and Innovation Challenge program, enabling them to develop STEM skills and discover the diverse field of biomechanics. Overall, the program was well received and recommended by participants.

  • Open Access

    Consensus-based guidelines for intervention protocols targeting the foot spring mechanism during landing: A modified Delphi study

    by Ceridwen R. Radcliffe, Nicholas A.T. Brown, Phil Newman, Jerushah J. Bull, Liz J. Bayley, Aurora Castro-Méndez, Louise Drysdale, Dominic J. Farris, Alycia Fong Yan, Melinda M. Franettovich Smith, et al.

  • Open Access

    Development of the CHILD‐SHOE Reporting Checklist: A Scoping Review and Modified Delphi Study to Support Reporting in Children's Footwear Research

    by Cylie M. Williams, Melanie Farlie, Jessica Kolic, Stewart C. Morrison, Kade Paterson, Matthew Hill, Jason Bonacci, Marise C. Breet, Simone Cranage, Shane V. Caswell, et al.

    Background: Inconsistent reporting of interventions and outcomes is a key barrier to research translation. Children's footwear research is often inconsistently reported as there are no standards or recommendations on what to report or consensus on which outcomes are important. The primary aim of this research was to develop expert consensus in children's footwear features and descriptions for research reporting. The secondary aim focused on consensus building of outcome measures relating to footwear in research in children. The outcome of this study was to develop a reporting checklist and guidance for researchers who are conducting children's footwear studies.Methods: This was a three‐round modified Delphi survey informed by a scoping review. We searched four databases to enable data extraction from 109 records related to children's footwear research. These data established the basis for Round 1. Authors were identified through the scoping review and invited to participate. In Round 1, participants rated the appropriateness of domains relating to reporting footwear descriptions and features and outcomes. Outcome measures were organised against a childhood adaptation of the International Classification of Functioning, Disability and Health (ICF)—F‐words in childhood disability domains. Consensus and agreement levels were set at 70%. Where 50%–69% of participants agreed, the item was returned for rating in Rounds 2 and 3.Results: There were 33 participants who responded to Round 1 and 29 (88%) in both subsequent rounds. Participants agreed on 20 statements that researchers should use to describe children's footwear and their features. All ICF domains met consensus for outcome collection. There were 17 outcome measures that participants agreed should be used in the future when a researcher's aim aligns with specific domains. Where no specific outcome measures reached consensus or agreement within a domain, a statement was developed to guide researcher choice in the subsequently developed checklist.Conclusion: Participants reached consensus on the essential footwear characteristics and descriptions that should be consistently reported in children's footwear research. This enabled us to produce a list of preferred outcome measures. Using this checklist can support future research through collection and reporting of comparable data.


  • The Biomechanics Research and Innovation Challenge: Development, Implementation, Uptake, and Reflections on the Inaugural Program

    by Celeste E. Coltman, Martina Barzan, Manuela Besomi, Victoria Brackley, Jaquelin A. Bousie, Julie Choisne, Laura E. Diamond, Taylor J.M. Dick, Nicole D’souza, Samantha Fien, et al.

    Biomechanics as a discipline is ideally placed to increase awareness and participation of girls and women in science, technology, engineering, and mathematics. A nationwide Biomechanics and Research Innovation Challenge (BRInC) centered on mentoring and role modeling was developed to engage high school girls (mentees) and early-mid-career women (mentors) in the field of biomechanics through the completion of a 100-day research and/or innovation project. This manuscript describes the development, implementation, and uptake of the inaugural BRInC program and synthesizes the research and innovation projects undertaken, providing a framework for adoption of this program within the global biomechanics community. Eighty-seven high school girls in years 9 and 10 (age range: 14–16 y) were mentored in teams (n = 17) by women in biomechanics (n = 24). Using a design thinking approach, teams generated solutions to biomechanics-based problem(s)/research question(s). Eight key reflections on program strengths, as well as areas for improvement and planned changes for future iterations of the BRInC program, are outlined. These key reflections highlight the innovation, impact, and scalability of the program; the importance of a program framework and effective communication tools; and implementation of strategies to sustain the program as well as the importance of diversity and building a sense of community.


  • Modelling the complexity of the foot and ankle during human locomotion: the development and validation of a multi-segment foot model using biplanar videoradiography

    by Jayishni N. Maharaj, Michael J. Rainbow, Andrew G. Cresswell, Sarah Kessler, Nicolai Konow, Dominic Gehring, Glen A. Lichtwark

    We developed and validated a multi-segment foot and ankle model for human walking and running. The model has 6-segments, and 7 degrees of freedom; motion between foot segments were constrained with a single oblique axis to enable triplanar motion [Joint Constrained (JC) model]. The accuracy of the JC model and that of a conventional model using a 6 degrees of freedom approach were assessed by comparison to segment motion determined with biplanar videoradiography. Compared to the 6-DoF model, our JC model demonstrated significantly smaller RMS differences [JC: 2.19° (1.43–2.73); 6-DoF: 3.25° (1.37–5.89)] across walking and running. The JC model is thus capable of more accurate musculoskeletal analyses and is also well suited for predictive simulations.


  • Open Access

    Development and validation of statistical shape models of the primary functional bone segments of the foot

    by Tamara M. Grant, Laura E. Diamond, Claudio Pizzolato, Bryce A. Killen, Daniel Devaprakash, Luke Kelly, Jayishni N. Maharaj, David J. Saxby

    Introduction: Musculoskeletal models are important tools for studying movement patterns, tissue loading, and neuromechanics. Personalising bone anatomy within models improves analysis accuracy. Few studies have focused on personalising foot bone anatomy, potentially incorrectly estimating the foot’s contribution to locomotion. Statistical shape models have been created for a subset of foot-ankle bones, but have not been validated. This study aimed to develop and validate statistical shape models of the functional segments in the foot: first metatarsal, midfoot (second-to-fifth metatarsals, cuneiforms, cuboid, and navicular), calcaneus, and talus; then, to assess reconstruction accuracy of these shape models using sparse anatomical data. Methods: Magnetic resonance images of 24 individuals feet (age = 28 ± 6 years, 52% female, height = 1.73 ± 0.8 m, mass = 66.6 ± 13.8 kg) were manually segmented to generate three-dimensional point clouds. Point clouds were registered and analysed using principal component analysis. For each bone segment, a statistical shape model and principal components were created, describing population shape variation. Statistical shape models were validated by assessing reconstruction accuracy in a leave-one-out cross validation. Statistical shape models were created by excluding a participant’s bone segment and used to reconstruct that same excluded bone using full segmentations and sparse anatomical data (i.e. three discrete points on each segment), for all combinations in the dataset. Tali were not reconstructed using sparse anatomical data due to a lack of externally accessible landmarks. Reconstruction accuracy was assessed using Jaccard index, root mean square error (mm), and Hausdorff distance (mm). Results: Reconstructions generated using full segmentations had mean Jaccard indices between 0.77 ± 0.04 and 0.89 ± 0.02, mean root mean square errors between 0.88 ± 0.19 and 1.17 ± 0.18 mm, and mean Hausdorff distances between 2.99 ± 0.98 mm and 6.63 ± 3.68 mm. Reconstructions generated using sparse anatomical data had mean Jaccard indices between 0.67 ± 0.06 and 0.83 ± 0.05, mean root mean square error between 1.21 ± 0.54 mm and 1.66 ± 0.41 mm, and mean Hausdorff distances between 3.21 ± 0.94 mm and 7.19 ± 3.54 mm. Jaccard index was higher (P < 0.01) and root mean square error was lower (P < 0.01) in reconstructions from full segmentations compared to sparse anatomical data. Hausdorff distance was lower (P < 0.01) for midfoot and calcaneus reconstructions using full segmentations compared to sparse anatomical data. Conclusion: For the first time, statistical shape models of the primary functional segments of the foot were developed and validated. Foot segments can be reconstructed with minimal error using full segmentations and sparse anatomical landmarks. In future, larger training datasets could increase statistical shape model robustness, extending use to paediatric or pathological populations.