Shadab Bagheri-Khoulenjani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Shadab Bagheri-Khoulenjani has a total of 49 co-authors. Here are the top co-authors by number of shared publications:
- Hamid Mirzadeh
Polymer Engineering Department, Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran
13 shared publications Hamid Mirzadeh
Biomedical Engineering Department, Amirkabir University of Technology (Tehran polytechnic), Tehran, Iran
3 shared publications- Mohammad Ali Shokrgozar
National Cell Bank of Iran, Pasteur Institute of Iran, Tehran, Iran
3 shared publications Nafiseh Olov
Polymer and Colour Engineering Department, Amirkabir University of Technology, Tehran, Iran
3 shared publications- Saeid Amanpour
Cancer Biology Research Center, Tehran University of Medical Sciences, Tehran, Iran
3 shared publications Darya Zeini
Faculty of Medicine Institute of basic medical sciences Oslo Norway
2 shared publications
Latest Publications
- 25 June 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 13 (28) , 8542-8557
Bioinspired osteoblast-imprinted piezoelectric PDMS/BaTiO3 nanocomposites accelerate the osteogenic differentiation of adipose-derived stem cells under mechanical stimulation
In this study, we propose a new cell culture substrate that can accelerate the osteogenic differentiation of adipose-derived mesenchymal stem cells (ADSCs) by exploiting the synergistic effects of cellular imprinting and mechanoelectrical stimulation. These substrates were prepared by imprinting osteoblast footprints onto the surface of nanocomposites based on polydimethylsiloxane (PDMS) filled with 20 wt% tetragonal barium titanate (BaTiO3) piezoelectric nanoparticles. In order to assess the osteoinductive potential of the substrates, in vitro cellular assays were carried out under dynamic mechanical stimulations. The results of cellular analysis showed that the osteoblastic imprints were highly influential in the regulation of ADSCs' functions and osteogenic differentiation. In substrates based on pristine PDMS, the surface imprints simulated the micro/nano topographies of natural bone extracellular matrix (ECM) that led to the enhancement of cell–substrate interactions and direction of cellular fate. Meanwhile, the incorporation of BaTiO3 nanoparticles into the imprinted samples further enhanced the focal adhesion, extension, and proliferation of ADSCs due to the accumulation of electric charges and elevation of surface electric potential. Extensive Ca2+ ion deposition and acceleration of bone mineralization were also reported for the ADSCs cultured on the PDMS/20BaTiO3 samples. We also applied an equiaxial tensile machine for the dynamic mechanical stimulation of the cell-loaded samples. The results revealed that the mechanical stimulation of the piezoelectric samples led to the generation of localized electrical signals that facilitated the cellular signaling and osteogenic gene expression. The rational increase in the expression level of osteogenic markers in 7 days approved the reliability of the approach in accelerating ADSC osteogenic differentiation by mimicking the topographical and mechanoelectrical features of the natural bone microenvironment.
- 25 June 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 13 (28) , 8542-8557
Bioinspired osteoblast-imprinted piezoelectric PDMS/BaTiO3 nanocomposites accelerate the osteogenic differentiation of adipose-derived stem cells under mechanical stimulation
In this study, we propose a new cell culture substrate that can accelerate the osteogenic differentiation of adipose-derived mesenchymal stem cells (ADSCs) by exploiting the synergistic effects of cellular imprinting and mechanoelectrical stimulation. These substrates were prepared by imprinting osteoblast footprints onto the surface of nanocomposites based on polydimethylsiloxane (PDMS) filled with 20 wt% tetragonal barium titanate (BaTiO3) piezoelectric nanoparticles. In order to assess the osteoinductive potential of the substrates, in vitro cellular assays were carried out under dynamic mechanical stimulations. The results of cellular analysis showed that the osteoblastic imprints were highly influential in the regulation of ADSCs' functions and osteogenic differentiation. In substrates based on pristine PDMS, the surface imprints simulated the micro/nano topographies of natural bone extracellular matrix (ECM) that led to the enhancement of cell–substrate interactions and direction of cellular fate. Meanwhile, the incorporation of BaTiO3 nanoparticles into the imprinted samples further enhanced the focal adhesion, extension, and proliferation of ADSCs due to the accumulation of electric charges and elevation of surface electric potential. Extensive Ca2+ ion deposition and acceleration of bone mineralization were also reported for the ADSCs cultured on the PDMS/20BaTiO3 samples. We also applied an equiaxial tensile machine for the dynamic mechanical stimulation of the cell-loaded samples. The results revealed that the mechanical stimulation of the piezoelectric samples led to the generation of localized electrical signals that facilitated the cellular signaling and osteogenic gene expression. The rational increase in the expression level of osteogenic markers in 7 days approved the reliability of the approach in accelerating ADSC osteogenic differentiation by mimicking the topographical and mechanoelectrical features of the natural bone microenvironment.
- 28 August 2023
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 34 (12) , 3792-3802
Effect of initial particle size and surface charge on the formation of the plasma protein corona on chitosan‐based nanoparticles
When a nanoparticle interacts with the biological environment, its surface is covered by a layer of biomolecules such as proteins and lipids called a protein corona. Given the importance and impact of the protein corona on the fate of nanoparticles in the body, it is important to study the interaction of nanoparticles with proteins. This study investigated the impact of the initial size and surface charge of nanoparticles on the changes in protein corona thickness on chitosan‐based nanoparticles after exposure to blood plasma. To be able to separate the chitosan‐based nanoparticles from the blood plasma, magnetic nanoparticles were coated with chitosan (with a positive charge) and carboxymethyl chitosan (CMC; with a negative charge) in two different size ranges of 200–250 and 300–350 nm. The coated nanoparticles' chemical composition, properties, and morphology were investigated using Fourier‐transform infrared spectroscopy, X‐ray diffraction, dynamic light scattering (DLS), zeta potential measurements, transmission electron microscopy, and field emission scanning electron microscope. The results confirmed the formation of nanoparticles based on chitosan and CMC. Subsequently, these nanoparticles were exposed to blood plasma to examine the protein corona that formed. The DLS and zeta potential measurements showed that the surface charge and particle size of the nanoparticles significantly influenced the formation of the protein corona. The results revealed that the smaller particle size and the positive surface charge of the nanoparticles resulted in the formation of a thicker corona. In addition, it showed that after exposure to the blood plasma proteins, the positive charge of the particles changed to a negative charge.
- 28 August 2023
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 34 (12) , 3792-3802
Effect of initial particle size and surface charge on the formation of the plasma protein corona on chitosan‐based nanoparticles
When a nanoparticle interacts with the biological environment, its surface is covered by a layer of biomolecules such as proteins and lipids called a protein corona. Given the importance and impact of the protein corona on the fate of nanoparticles in the body, it is important to study the interaction of nanoparticles with proteins. This study investigated the impact of the initial size and surface charge of nanoparticles on the changes in protein corona thickness on chitosan‐based nanoparticles after exposure to blood plasma. To be able to separate the chitosan‐based nanoparticles from the blood plasma, magnetic nanoparticles were coated with chitosan (with a positive charge) and carboxymethyl chitosan (CMC; with a negative charge) in two different size ranges of 200–250 and 300–350 nm. The coated nanoparticles' chemical composition, properties, and morphology were investigated using Fourier‐transform infrared spectroscopy, X‐ray diffraction, dynamic light scattering (DLS), zeta potential measurements, transmission electron microscopy, and field emission scanning electron microscope. The results confirmed the formation of nanoparticles based on chitosan and CMC. Subsequently, these nanoparticles were exposed to blood plasma to examine the protein corona that formed. The DLS and zeta potential measurements showed that the surface charge and particle size of the nanoparticles significantly influenced the formation of the protein corona. The results revealed that the smaller particle size and the positive surface charge of the nanoparticles resulted in the formation of a thicker corona. In addition, it showed that after exposure to the blood plasma proteins, the positive charge of the particles changed to a negative charge.
- 23 March 2023
- Published by Elsevier in Carbohydrate Polymers
- Vol. 313, 120836
Polysaccharide-based polyampholyte complex formation: Investigating the role of intra-chain interactions
- 23 March 2023
- Published by Elsevier in Carbohydrate Polymers
- Vol. 313, 120836
Polysaccharide-based polyampholyte complex formation: Investigating the role of intra-chain interactions
- 28 February 2023
- Published by Emerald Publishing in Bioinspired, Biomimetic and Nanobiomaterials
- Vol. 12 (1) , 1-11
Carboxymethyl chitosan/gelatin/hydroxyapatite biomimetic cryogels for bone regeneration
Gelation at a temperature below the freezing point of a solvent is known as cryogelation, which has attracted attention in regenerative medicine due to its improved mechanical and structural properties. This study focuses on using cryogelation as a versatile method for fabricating biomimetic scaffolds with improved mechanical strength and larger pore sizes with potential for bone tissue engineering applications. Scaffolds comprising carboxymethyl chitosan/gelatin/nano-hydroxyapatite were formed through cryogelation. The effects of three parameters – namely, cross-linker concentration, mineral content and gelatin-to-polymer ratio – on physical, chemical and mechanical properties were investigated. In this work, MG63 cells were used for an in vitro assay. In addition, an in vivo assay was conducted to investigate the biocompatibility of the nanocomposite scaffolds. The results showed that all scaffolds have a porous structure with interconnected pores with a morphology similar to bone structure. Their pore size, porosity and swelling ratio decreased with an increased cross-linker concentration, while nano-hydroxyapatite had the opposite effect. X-ray diffraction results also showed that the inorganic phase retained its crystallinity in the substrate with a slight decrease in crystal size. In addition, the scaffolds showed no toxicity in either in vitro or in vivo studies. The obtained results showed that biomimetic cryogels based on carboxymethyl chitosan/gelatin/hydroxyapatite have potential for bone tissue engineering.
- 28 February 2023
- Published by Emerald Publishing in Bioinspired, Biomimetic and Nanobiomaterials
- Vol. 12 (1) , 1-11
Carboxymethyl chitosan/gelatin/hydroxyapatite biomimetic cryogels for bone regeneration
Gelation at a temperature below the freezing point of a solvent is known as cryogelation, which has attracted attention in regenerative medicine due to its improved mechanical and structural properties. This study focuses on using cryogelation as a versatile method for fabricating biomimetic scaffolds with improved mechanical strength and larger pore sizes with potential for bone tissue engineering applications. Scaffolds comprising carboxymethyl chitosan/gelatin/nano-hydroxyapatite were formed through cryogelation. The effects of three parameters – namely, cross-linker concentration, mineral content and gelatin-to-polymer ratio – on physical, chemical and mechanical properties were investigated. In this work, MG63 cells were used for an in vitro assay. In addition, an in vivo assay was conducted to investigate the biocompatibility of the nanocomposite scaffolds. The results showed that all scaffolds have a porous structure with interconnected pores with a morphology similar to bone structure. Their pore size, porosity and swelling ratio decreased with an increased cross-linker concentration, while nano-hydroxyapatite had the opposite effect. X-ray diffraction results also showed that the inorganic phase retained its crystallinity in the substrate with a slight decrease in crystal size. In addition, the scaffolds showed no toxicity in either in vitro or in vivo studies. The obtained results showed that biomimetic cryogels based on carboxymethyl chitosan/gelatin/hydroxyapatite have potential for bone tissue engineering.
- 14 April 2022
- Published by Springer Nature in Progress in Biomaterials
- Vol. 11 (2) , 113-135
Injectable hydrogels for bone and cartilage tissue engineering: a review
Tissue engineering, using a combination of living cells, bioactive molecules, and three-dimensional porous scaffolds, is a promising alternative to traditional treatments such as the use of autografts and allografts for bone and cartilage tissue regeneration. Scaffolds, in this combination, can be applied either through surgery by implantation of cell-seeded pre-fabricated scaffolds, or through injection of a solidifying precursor and cell mixture, or as an injectable cell-seeded pre-fabricated scaffold. In situ forming and pre-fabricated injectable scaffolds can be injected directly into the defect site with complex shape and critical size in a minimally invasive manner. Proper and homogeneous distribution of cells, biological factors, and molecular signals in these injectable scaffolds is another advantage over pre-fabricated scaffolds. Due to the importance of injectable scaffolds in tissue engineering, here different types of injectable scaffolds, their design challenges, and applications in bone and cartilage tissue regeneration are reviewed.
- 14 April 2022
- Published by Springer Nature in Progress in Biomaterials
- Vol. 11 (2) , 113-135
Injectable hydrogels for bone and cartilage tissue engineering: a review
Tissue engineering, using a combination of living cells, bioactive molecules, and three-dimensional porous scaffolds, is a promising alternative to traditional treatments such as the use of autografts and allografts for bone and cartilage tissue regeneration. Scaffolds, in this combination, can be applied either through surgery by implantation of cell-seeded pre-fabricated scaffolds, or through injection of a solidifying precursor and cell mixture, or as an injectable cell-seeded pre-fabricated scaffold. In situ forming and pre-fabricated injectable scaffolds can be injected directly into the defect site with complex shape and critical size in a minimally invasive manner. Proper and homogeneous distribution of cells, biological factors, and molecular signals in these injectable scaffolds is another advantage over pre-fabricated scaffolds. Due to the importance of injectable scaffolds in tissue engineering, here different types of injectable scaffolds, their design challenges, and applications in bone and cartilage tissue regeneration are reviewed.
- 1 October 2021
- Published by Elsevier in Progress in Organic Coatings
- Vol. 159, 106435
Self-stratifying behavior of a novel light-curable coating with gradient hydrophobic properties: Computational and experimental study
- 1 October 2021
- Published by Elsevier in Progress in Organic Coatings
- Vol. 159, 106435
Self-stratifying behavior of a novel light-curable coating with gradient hydrophobic properties: Computational and experimental study
- Open Access
- 21 April 2021
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 11 (25) , 14996-15009
A highly efficient microwave-assisted synthesis of an LED-curable methacrylated gelatin for bio applications
This study deals with the development of an LED-curable methacrylated gelatin (GelMA) synthesis via microwave (MW) irradiation with a reaction and purification time-, energy-, and methacrylation reagent-saving approach. To investigate the efficiency of MW irradiation in GelMA synthesis, characteristics of the GelMAs prepared by using glycidyl methacrylate (GMA) or methacrylic anhydride (MA) via the MW-assisted (MWA) method were compared comprehensively with those synthesized via the conventional heating method. Moreover, MWA reaction conditions were optimized in terms of methacrylation reagent concentrations (C), reaction time (t), and MW power (P). Characterization and assessment of the GelMAs were conducted with 1H NMR, FT-IR, and Raman spectroscopy along with physical-mechanical, thermal, and hydrophilicity analysis. The results demonstrated that the MWA synthesized GMA–GelMA hydrogels were possessed of increased methacrylation degree (MD), gel fraction (GF), tensile strength (TS), elongation at break (EB), glass transition temperature (Tg), and water contact angle (WCA) as well as decreased swelling degree (SD) values in comparison to those of MA–GelMA and GMA–GelMA hydrogels prepared via the MWA and conventional method, respectively. Enhanced properties of the MWA synthesized GMA-hydrogels suggested an effective methacryloyl conjugation leading to a greater amount of covalent crosslinking density justified by the dipolar moment calculations. Optimal GMA C, t, P, and purification time for a highly crosslinked GelMA hydrogel (MD: 96.1%, GF: 98.3%, SD: 10.11%, TS: 6.7 MPa, EB: 175.2%, Tg: 75.34 °C, and WCA: 72.22°) were found to be a 5 times molar excess over the primary amine groups of gelatin, 5 min, 500 W, and 24 h, respectively. Thus, the optimized MW conditions offer a promising green method to prepare GelMAs for bio applications.
- 21 April 2021
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 11 (25) , 14996-15009
Open AccessA highly efficient microwave-assisted synthesis of an LED-curable methacrylated gelatin for bio applications
This study deals with the development of an LED-curable methacrylated gelatin (GelMA) synthesis via microwave (MW) irradiation with a reaction and purification time-, energy-, and methacrylation reagent-saving approach. To investigate the efficiency of MW irradiation in GelMA synthesis, characteristics of the GelMAs prepared by using glycidyl methacrylate (GMA) or methacrylic anhydride (MA) via the MW-assisted (MWA) method were compared comprehensively with those synthesized via the conventional heating method. Moreover, MWA reaction conditions were optimized in terms of methacrylation reagent concentrations (C), reaction time (t), and MW power (P). Characterization and assessment of the GelMAs were conducted with 1H NMR, FT-IR, and Raman spectroscopy along with physical-mechanical, thermal, and hydrophilicity analysis. The results demonstrated that the MWA synthesized GMA–GelMA hydrogels were possessed of increased methacrylation degree (MD), gel fraction (GF), tensile strength (TS), elongation at break (EB), glass transition temperature (Tg), and water contact angle (WCA) as well as decreased swelling degree (SD) values in comparison to those of MA–GelMA and GMA–GelMA hydrogels prepared via the MWA and conventional method, respectively. Enhanced properties of the MWA synthesized GMA-hydrogels suggested an effective methacryloyl conjugation leading to a greater amount of covalent crosslinking density justified by the dipolar moment calculations. Optimal GMA C, t, P, and purification time for a highly crosslinked GelMA hydrogel (MD: 96.1%, GF: 98.3%, SD: 10.11%, TS: 6.7 MPa, EB: 175.2%, Tg: 75.34 °C, and WCA: 72.22°) were found to be a 5 times molar excess over the primary amine groups of gelatin, 5 min, 500 W, and 24 h, respectively. Thus, the optimized MW conditions offer a promising green method to prepare GelMAs for bio applications.
- 9 March 2021
- Published by Wiley in Journal of Biomedical Materials Research Part A
- Vol. 109 (9) , 1657-1669
Fabrication of nanocomposite/nanofibrous functionally graded biomimetic scaffolds for osteochondral tissue regeneration
One of the main challenges in treating osteochondral lesions via tissue engineering approach is providing scaffolds with unique characteristics to mimic the complexity. It has led to application of heterogeneous scaffolds as a potential candidate for engineering of osteochondral tissues, in which graded multilayered‐structure should promote bone and cartilage growth. By designing three‐dimensional (3D)‐nanofibrous scaffolds mimicking the native extracellular matrix's nanoscale structure, cells can grow in controlled conditions and regenerate the damaged tissue. In this study, novel 3D‐functionality graded nanofibrous scaffolds composed of five layers based on different compositions containing polycaprolactone(PCL)/gelatin(Gel)/nanohydroxyapatite (nHA) for osteoregeneration and chitosan(Cs)/polyvinylalcohol(PVA) for chondral regeneration are introduced. This scaffold is fabricated by electrospinning technique using spring as collector to create 3D‐nanofibrous scaffolds. Fourier‐transform infrared spectroscopy, X‐ray diffraction, energy dispersive X‐ray spectroscopy, scanning electron microscopy, mechanical compression test, porosimetry, and water uptake studies were applied to study each layer's physicochemical properties and whole functionally graded scaffold. Besides, biodegradation and biological studies were done to investigate biological performance of scaffold. Results showed that each layer has a fibrous structure with continuous nanofibers with improved pore size and porosity of novel 3D scaffold (6–13 μm and 90%) compared with two‐dimensional (2D) mat (2.2 μm and 19.3%) with higher water uptake capacity (about 100 times of 2D mat). Compression modulus of electrospun scaffold was increased to 78 MPa by adding nHA. The biological studies revealed that the layer designed for osteoregeneration could improve cell proliferation rate in comparison to the layer designed for chondral regeneration. These results showed such structure possesses a promising potential for the treatment of osteochondral defects.
- 9 March 2021
- Published by Wiley in Journal of Biomedical Materials Research Part A
- Vol. 109 (9) , 1657-1669
Fabrication of nanocomposite/nanofibrous functionally graded biomimetic scaffolds for osteochondral tissue regeneration
One of the main challenges in treating osteochondral lesions via tissue engineering approach is providing scaffolds with unique characteristics to mimic the complexity. It has led to application of heterogeneous scaffolds as a potential candidate for engineering of osteochondral tissues, in which graded multilayered‐structure should promote bone and cartilage growth. By designing three‐dimensional (3D)‐nanofibrous scaffolds mimicking the native extracellular matrix's nanoscale structure, cells can grow in controlled conditions and regenerate the damaged tissue. In this study, novel 3D‐functionality graded nanofibrous scaffolds composed of five layers based on different compositions containing polycaprolactone(PCL)/gelatin(Gel)/nanohydroxyapatite (nHA) for osteoregeneration and chitosan(Cs)/polyvinylalcohol(PVA) for chondral regeneration are introduced. This scaffold is fabricated by electrospinning technique using spring as collector to create 3D‐nanofibrous scaffolds. Fourier‐transform infrared spectroscopy, X‐ray diffraction, energy dispersive X‐ray spectroscopy, scanning electron microscopy, mechanical compression test, porosimetry, and water uptake studies were applied to study each layer's physicochemical properties and whole functionally graded scaffold. Besides, biodegradation and biological studies were done to investigate biological performance of scaffold. Results showed that each layer has a fibrous structure with continuous nanofibers with improved pore size and porosity of novel 3D scaffold (6–13 μm and 90%) compared with two‐dimensional (2D) mat (2.2 μm and 19.3%) with higher water uptake capacity (about 100 times of 2D mat). Compression modulus of electrospun scaffold was increased to 78 MPa by adding nHA. The biological studies revealed that the layer designed for osteoregeneration could improve cell proliferation rate in comparison to the layer designed for chondral regeneration. These results showed such structure possesses a promising potential for the treatment of osteochondral defects.
- 11 October 2020
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 32 (1) , 31-40
Cold atmospheric plasma modification of curcumin loaded in tri‐phosphate chitosan nanoparticles enhanced breast cancer cells apoptosis
The anti‐cancer mechanisms of curcumin have been reported to include suppressions of angiogenesis and tumor proliferation. The main goal of this research is to increase the solubility of curcumin by cold atmospheric plasma (CAP) and assess the effects of modified curcumin by charging with tri‐polyphosphate chitosan nanoparticles for MCF‐7, MDA‐MB‐231 breast cancer cells, and human fibroblast cells. Curcumin modification was done by CAP and its solubility was evaluated by spectrophotometry. After loading modified curcumin into nano‐chitosan‐TPP, nanocurcumin was characterized by scanning electron microscopy. Cellular viability and apoptosis of treated cells were assessed by MTT and Annexin V. The changes of messenger RNA expression of TP5353 and VEGF genes were analyzed by real‐time PCR. CAP was able to transform the curcumin to possess hydrophilic characteristics after 90 seconds. The mean diameter of Curcumin loaded chitosannanoparticles (NPs) were determined as 48 nm. MTT results showed that the IC50 of nano Cur‐chitosan‐TPP was effectively decreased compared to free curcumin in MCF‐7 (15 μg/mL at 72 hours vs 20 μg/mL at 48 hours). Additionally, nano Cur‐chitosan‐TPP had no significant effect on normal cells (Human dermal fibroblas: HDF), whereas it also decreased the viability of triple negative breast cancer cell line (MDA‐MB‐231). Real‐time PCR results showed that expression level of TP53 gene was upregulated (P = .000), whereas VEGF gene downregulated (P = .000) in treated MCF‐7 cells. Curcumin loaded chitosan nanoparticles have led to an induction of apoptosis (79.93%) and cell cycle arrest (at S and G2M). Modified‐curcumin‐tri‐polyphosphate chitosan nanoparticles using CAP can be considered as a proper candidate for breast cancer treatment.
- 11 October 2020
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 32 (1) , 31-40
Cold atmospheric plasma modification of curcumin loaded in tri‐phosphate chitosan nanoparticles enhanced breast cancer cells apoptosis
The anti‐cancer mechanisms of curcumin have been reported to include suppressions of angiogenesis and tumor proliferation. The main goal of this research is to increase the solubility of curcumin by cold atmospheric plasma (CAP) and assess the effects of modified curcumin by charging with tri‐polyphosphate chitosan nanoparticles for MCF‐7, MDA‐MB‐231 breast cancer cells, and human fibroblast cells. Curcumin modification was done by CAP and its solubility was evaluated by spectrophotometry. After loading modified curcumin into nano‐chitosan‐TPP, nanocurcumin was characterized by scanning electron microscopy. Cellular viability and apoptosis of treated cells were assessed by MTT and Annexin V. The changes of messenger RNA expression of TP5353 and VEGF genes were analyzed by real‐time PCR. CAP was able to transform the curcumin to possess hydrophilic characteristics after 90 seconds. The mean diameter of Curcumin loaded chitosannanoparticles (NPs) were determined as 48 nm. MTT results showed that the IC50 of nano Cur‐chitosan‐TPP was effectively decreased compared to free curcumin in MCF‐7 (15 μg/mL at 72 hours vs 20 μg/mL at 48 hours). Additionally, nano Cur‐chitosan‐TPP had no significant effect on normal cells (Human dermal fibroblas: HDF), whereas it also decreased the viability of triple negative breast cancer cell line (MDA‐MB‐231). Real‐time PCR results showed that expression level of TP53 gene was upregulated (P = .000), whereas VEGF gene downregulated (P = .000) in treated MCF‐7 cells. Curcumin loaded chitosan nanoparticles have led to an induction of apoptosis (79.93%) and cell cycle arrest (at S and G2M). Modified‐curcumin‐tri‐polyphosphate chitosan nanoparticles using CAP can be considered as a proper candidate for breast cancer treatment.