FZFeng Zheng

Feng Zheng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Feng Zheng has a total of 59 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Manufacturing Supply Chain Development for Modular Solar-Thermochemical Conversion Platform - CRADA 387 (Final Report)

    by Ward E. TeGrotenhuis, Daniel R. Bottenus, Paul H. Humble, Patrick S. McNeff, Timothy G. Veldman, Richard F. Zheng, Zach Gill, Robert Wegeng, Flavio da Cruz

    Summary Modular chemical process intensification (MCPI) is an emerging field where chemical processing is performed using small-scale modular equipment instead of conventional large centralized chemical plants. Conventional chemical plants benefit from economies of scale that encourage scale-up to ever larger plants. A goal of MCPI is to develop technology that intensifies processing so that equipment can be dramatically smaller and integrated into modular systems. Scale-up occurs by adding more modules in parallel rather than making the equipment larger. A key concept is that equipment and modules can ultimately be cheaper by leveraging economies of mass production, analogous to the automotive industry, in manufacturing the equipment. This project made significant progress toward this outcome by meeting the RAPID institute metric to reduce equipment cost by 20% for each doubling in manufacturing volume. The MCPI application was thermochemical technology that is being commercialized by STARS Technology Corporation, one of the CRADA partners. The technology converts solar and renewable power to chemical energy to produce renewable hydrogen, fuels, and chemicals. The benefit to the public is reduction in greenhouse gases that are contributing to climate change. The project transitioned the steam methane reforming (SMR) reactor from conventional fabrication methods to additive manufacturing (AM)more » direct metal laser sintering (DMLS) process. This is projected to reduce the cost of making a reactor by 58% when producing 100 reactors per year. Innovations in the DMLS process produced a patented design that reduces reactor weight by 60%. Reductions in material costs and processing time extend the DMLS advantage to higher production volumes. The new design promises to be 38% cheaper than the conventional processes at 1000 units per year. The resulting 87% reduction in the steam methane reforming (SMR) module cost in scaling from current costs meets the RAPID metric. The project was successful in producing and testing the first ever additively manufactured SMR reactors. A reactor achieved over 82% efficiency in converting electric power to chemical energy, which is a world record for an inductively heated SMR. The project has contributed to the design and assembly of a first demonstration plant that is headed to a hydrogen bus filling station in Thousand Palms, CA. « less

  • Open Access

    Dish-STARS Commercialization (Final Report)

    by Richard F. Zheng

    The goal of this project is to aggressively support the near-term commercialization of a new technology platform – based on the integration of solar concentrators and micro- and meso-channel process technology (MMPT) – that was evaluated and identified as a strong candidate for near-term commercialization at EERE’s inaugural Lab-Corps program during early FY2016. Known as STARS, for Solar Thermochemical Advanced Reactor System, or Dish-STARSTM when paired with parabolic dish concentrators, STARS is a promising energy-related technology developed at the Pacific Northwest National Laboratory (PNNL) that efficiently converts solar energy into chemical energy. Combined with economies through hardware mass production, the efficiency of Dish-STARSTM provides a near-term opportunity for the production of renewable electricity, fuels and chemicals. The project supported the cooperative development of Dish-STARSTM by PNNL and industry partners including California Gas Company (SoCalGas) and the startup company, STARS Technology Corporation (STC), which was founded by the PNNL Lab-Corps team that evaluated STARS on behalf of EERE. Under this project, the team advanced the Technology Readiness Level 6 (TRL 6) STARS reaction system, developed under the previous DOE SunShot project, to TRL 7 through on-sun testing in California by PNNL. The advances made in this project enabled STC to acceleratemore » commercial development and initiate work towards a major technology demonstration in California for a hydrogen filling station application. « less

  • Long-duration Energy Storage Technology Analysis and Development

    by Yuyan Shao, Soowhan Kim, Litao Yan, Richard F. Zheng, Wei Du, Yuan Liu, Renke Huang, Ankit Singhal, Urmila Agrawal, Zhenyu Huang, et al.

    This project develops a new low-cost and flexible long-duration energy storage (LDES) technology based on simultaneous regeneration technology. In lieu of the technology development, the project team also conducts a complete cost analysis for LDES based on various currently available technologies, as well as grid economic and environmental benefits analysis for LDES. There are three tasks in this project: Task 1. Fe-H2 flow cell fabrication, testing, demonstration. Task 2. Dynamic modeling, simulation and control architecture of power system. Task 3.

  • Absorber Column CFD model validation against PNNL’s device-scale absorber column on the LCFS unit

    by Yucheng Fu, Jie Bao, Chao Wang, Rajesh Kumar Singh, Dushyant Barpaga, Richard F. Zheng, Zhijie Xu, Sham Bhat, John Baca, Christine Anderson-Cook, et al.

    Absorber column has been widely used for CO2 capture in the coal-fired power plants. High-fidelity CFD models play an important role in absorber column design and solvents optimization, which help enhance the CO2 capture efficiency and reduce the operation cost. This report provides a comprehensive description of the development of CFD absorber models at two different levels, the design and implementation of PNNL’s device-scale absorber column experiment, and the methodology to combine the CFD results, experiment data, and Aspen model for a better understanding of the interface area in packed column. A composite model is firstly proposed in the Discrete Element Method (DEM) packing process, which can model the complex geometry of various packing elements. This generates a realistic packing pattern and accurate packing porosity ? and specific area ap compared to the actual values for absorber column used in LCFS. Two level of CFD absorber models were developed, nabmely the full-size coloumn model (FCM) to simulate the entire packed column with a focus on the wall/entrance effects, and the representative column model (RCM) to simulate a section of column with a focus on the sensitivity study of interface area. A Design of Experiment (DoE) plan was developed to guidemore » the collection of 100 run CFD data and 12 experiment runs. The 100 CFD runs were carried out in the RCM with Pro-Pak packing and cover a wide operation range and solvent properties. Impact of influential factors on the interface area in packed column were investigated in details. The CFD interface area was then combined with the experimental data and Aspen model to infer some information of the effective contact angle in the column. The accuracy and uncertainties in the interface area and contact angle can be quantified. « less


  • Open Access

    Effects of Precipitant and pH on Coprecipitation of Nanosized Co-Cr-V Alloy Powders

    by Xiaoyu Chen, Yongxia Li, Lan Huang, Dan Zou, Enxi Wu, Yanjun Liu, Yuanyan Xie, Rui Yao, Songyi Liao, Guangrong Wang, et al.

    Nanosized Co-Cr-V alloy powders were synthesized via coprecipitation method. Effects of precipitants ((NH4)2C2O4·H2O and Na2CO3) and pH were investigated by X-ray diffraction (XRD), Zeta potential analyzer, thermogravimetry-differential scanning calorimetry (TG-DSC), inductively coupled plasma-atomic emission spectrometry (ICP-AES) and scanning electron microscopy (SEM). Co-Cr-V alloy powders were consisted of major face-centered cubic Co (fcc Co) and minor hexagonal close-packed Co (hcp Co). Grain sizes of precursors and Co-Cr-V alloy powders were increased with pH value (7–10) within the ranges of 3~39 and 39~66 nm, respectively. Rod-like or granular Co-Cr-V alloy particles were assembled by interconnected nanograins. At pH = 7, Na2CO3 precipitant was found to be beneficial to maintain the desirable composition of Co-Cr-V powders. It was also found that lower pH favors the maintenance of pre-designed composition, while grain coarsens at higher pH. Effects of variation for precipitant and pH on the morphology and composition of Co-Cr-V alloy powder were discussed in detail and relevant mechanism was further proposed.


  • Mechanical properties of 1 mol% CeO 2 ‐10 mol% Sc 2 O 3 co‐doped and stabilized ZrO 2 synthesized through hydro/solve‐thermal method

    by Yuchen Liu, Xiaoyu Chen, Rui Yao, Songyi Liao, Weiping Chen, Donghong Nie, Yueming Wang, Feng Zheng

    Ultra‐fine 1 mol% CeO 2 ‐10 mol% Sc 2 O 3 co‐doped and stabilized ZrO 2 (1Ce10Sc SZ ) powders with average grain size less than 10 nm in diameter were prepared by hydro/solve‐thermal method using either deionized water, ethanol, or methanol as solvent. As‐synthesized powders were characterized in terms of phase structure, particle morphology, and chemical composition by X‐ray diffraction ( XRD ), Fourier transform infrared spectroscopy ( FTIR ), high‐resolution transmission electron microscopy ( HRTEM ), and inductively coupled plasma‐optical emission spectroscopy ( ICP ‐ OES ), respectively. Sintering studying was conducted on pellets of 15 mm in diameter and 3 mm in thickness under uniaxial compaction using 25 MPa at either 600, 800, 1000, 1100, 1200, 1400, or 1500°C for 1 hour. Phase transitions and grain morphologies of those sintered samples were characterized by XRD and field emission scanning electron microscopy ( FESEM ). Mechanical properties were characterized on dense pellets sintered at 1500°C by nanoindentation. Experimental results showed that ethanol was more effective to synthesize agglomerate‐free 1Ce10Sc SZ powders as compared with deionized water and methanol. Choice of solvent affected the environment of hydro/solve‐thermal solution, which led to variation of chemical compositions of powders and porosities of sintered pellets, and therefore, influenced their mechanical performance. Our study showed that solvent was important to make dense, thin, and mechanically robust 1Ce10Sc SZ electrolyte for potential applications in electrochemical devices. Absolute values of hardness ( H ) and Young's modulus ( E ) measured from our samples are much higher and more consistence than those results obtained from commercial vendors reported in literatures.


  • Open Access

    Communication—A Composite Polymer Electrolyte for Safer Mg Batteries

    by Shufeng Song, Masashi Kotobuki, Feng Zheng, Qibin Li, Chaohe Xu, Yu Wang, Wei Dong Z. Li, Ning Hu, Li Lu

    Lithium batteries are facing issues of safety and cost in respect of grid-scale applications. Research on post-lithium systems, i.e. Mg batteries may open up new opportunities to address these issues. A key on the way of exploring Mg batteries is to develop electrolytes with high ionic conductivity and wide voltage window. Here, we report a composite polymer electrolyte for safer Mg batteries. The polymer electrolyte consists of poly(ethylene oxide), magnesium salt, nanometer-size oxide filler and ionic liquid, and shows high ionic conductivity of 0.54 mS cm−1 at ambient temperature and possesses a wide range of voltage stability of 4 V vs Mg/Mg2+.


  • Structure refinement and up-conversion of Ho 3+ /Er 3+ Co-doped 12CaO·7Al 2 O 3

    by Song-Yi Liao, Rui Yao, Xiao-Yu Chen, Guang-Rong Wang, Feng Zheng


  • Characteristics, Thermodynamics, and Preparation of Nanocaged 12CaO·7Al 2 O 3 and Its Derivatives

    by Songyi Liao, Rui Yao, Xiaoyu Chen, Guangrong Wang, Feng Zheng

    Crystal s tructures, characteristics, and preparations of 12CaO·7Al 2 O 3 family and CaO–Al 2 O 3 (C–A) system have been reviewed in detail with relevant thermodynamic parameters being assessed or recalculated. 12CaO·7Al 2 O 3 (shortened as C12A7) can form several derivatives of type C12A7:M n− or C12A7–M n− through replacing so‐called “free oxygen ion” by many anions including OH − , H − , O − , , F − , Cl − , and e − in their cages, or being adopted by rare earth metals or alkaline earth metal oxides at cation sites (Ca 2+ or Al 3+ ). These doped C12A7 derivatives show unique material properties of transparent conduction, catalysis, and antibacterial with potential applications in fast ion conductors, optoelectronics, oxidants, and catalysts etc.