Iftikhar Ali Sahito
Research Subjects
Iftikhar Ali Sahito has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
Kyung Chul Sun
13 shared publicationsAlvira Ayoub Arbab
11 shared publications- Muhammad Bilal Qadir
National Textile University
10 shared publications Sung Hoon Jeong
Department Organic and Nano Engineering
8 shared publications- Sung Hoon Jeong
Department of Organic and Nano Engineering, Hanyang University, 222 Wangsimni-ro, Seongdong-gu, Seoul 04763, Republic of Korea
8 shared publications Anam Ali Memon
Smart Energy Textile Materials Research Lab, Department of Textile Engineering, Mehran University of Engineering and Technology, Jamshoro, Pakistan
6 shared publications
Latest Publications
- 27 July 2026
- Published by Springer Nature in MRS Advances
- p. 1-8
Fabrication of conductive cotton fabrics via doctor blade coating of functionalized MWCNT/CMC composites
- 27 July 2026
- Published by Springer Nature in MRS Advances
- p. 1-8
Fabrication of conductive cotton fabrics via doctor blade coating of functionalized MWCNT/CMC composites
- 22 May 2019
- Published by SAGE Publications in Journal of Industrial Textiles
- Vol. 50 (7) , 1006-1019
Impact of types of orthophthalic unsaturated polyester matrix on tensile strength of woven roving fibers as reinforcement
This paper focuses on a unique form of polyester matrix composite with woven roving fibers as reinforcing agent, replacing the conventional E-glass. The impact of different types of orthophthalic unsaturated polyester matrix and their composites on tensile strength of polyester matrix composite with woven roving fiber is investigated. Polyester matrix composite with woven roving fiber reinforcement is made by hand lay-up technique, where different types of orthophthalic unsaturated polyester matrices available in the market are used. The mechanical properties of the developed material are tested using universal testing machine, which investigated tensile strength. The BYK A-555 (coded 555) orthophthalic unsaturated polyester matrix showed 30% greater tensile strength and required least curing time as compared to other matrices, including Mc Laren S3133 (coded 3133), LUPOY-GP5300 (coded GP5300) and HSEA-LF1 (coded LF1). However, the composite of 3133 and 555 shows 50% greater tensile strength as compared to single matrix, and when all orthophthalic unsaturated polyester resins (3133 + 555 + GP5300 + LF1) are mixed together, their composite show 70% greater tensile as compared to single unsaturated polyester matrix.
- 22 May 2019
- Published by SAGE Publications in Journal of Industrial Textiles
- Vol. 50 (7) , 1006-1019
Impact of types of orthophthalic unsaturated polyester matrix on tensile strength of woven roving fibers as reinforcement
This paper focuses on a unique form of polyester matrix composite with woven roving fibers as reinforcing agent, replacing the conventional E-glass. The impact of different types of orthophthalic unsaturated polyester matrix and their composites on tensile strength of polyester matrix composite with woven roving fiber is investigated. Polyester matrix composite with woven roving fiber reinforcement is made by hand lay-up technique, where different types of orthophthalic unsaturated polyester matrices available in the market are used. The mechanical properties of the developed material are tested using universal testing machine, which investigated tensile strength. The BYK A-555 (coded 555) orthophthalic unsaturated polyester matrix showed 30% greater tensile strength and required least curing time as compared to other matrices, including Mc Laren S3133 (coded 3133), LUPOY-GP5300 (coded GP5300) and HSEA-LF1 (coded LF1). However, the composite of 3133 and 555 shows 50% greater tensile strength as compared to single matrix, and when all orthophthalic unsaturated polyester resins (3133 + 555 + GP5300 + LF1) are mixed together, their composite show 70% greater tensile as compared to single unsaturated polyester matrix.
- Open Access
- 30 December 2018
- Published by Wiley in Journal of Nanomaterials
- Vol. 2018, 1-2
Advanced Hybrid Functional Materials for Energy Applications
- 30 December 2018
- Published by Wiley in Journal of Nanomaterials
- Vol. 2018, 1-2
Open AccessAdvanced Hybrid Functional Materials for Energy Applications
- 21 March 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 6 (18) , 8307-8322
An evidence for an organic N-doped multiwall carbon nanotube heterostructure and its superior electrocatalytic properties for promising dye-sensitized solar cells
A novel organic heteroatom doping technique is proposed for the synthesis of N-doped multiwall carbon nanotube (MWCNT) heterostructures. The approach involves the effective doping of MWCNTs with nitrogen via a cationised bovine serum albumin (cBSA) protein complex. The cationization of BSA releases an exceptional number of activated nitrogen species present in localized amino groups, which are further embedded into the MWCNT framework. The amino groups present in BSA act as nitrogen donors and surface stabilizing agents to generate a highly conductive and functionalized carbon heterostructure. The doped nitrogen was present in the form of pyridinic and pyrrolic states, as evidenced by XPS analysis. Organic N-doped MWCNTs with predominant pyridinic N atoms displayed superior charge transfer (RCT = 0.06 Ω) owing to their superior electrocatalytic activity. A DSSC fabricated with organic N-doped MWCNT heterostructures exhibited a high conversion efficiency of 9.55%, which was similar to that of a Pt cathode, with an efficiency of 9.89%. The superior electrochemical performance of organic N-doped MWCNT heterostructures is due to the high charge polarization arising from the difference in electronegativity between nitrogen and carbon as well as the structural strain caused by the cationic BSA protein complex. Our proposed system provides new routes for the synthesis of organic heteroatom-doped nanomaterials for promising energy storage devices.
- 21 March 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 6 (18) , 8307-8322
An evidence for an organic N-doped multiwall carbon nanotube heterostructure and its superior electrocatalytic properties for promising dye-sensitized solar cells
A novel organic heteroatom doping technique is proposed for the synthesis of N-doped multiwall carbon nanotube (MWCNT) heterostructures. The approach involves the effective doping of MWCNTs with nitrogen via a cationised bovine serum albumin (cBSA) protein complex. The cationization of BSA releases an exceptional number of activated nitrogen species present in localized amino groups, which are further embedded into the MWCNT framework. The amino groups present in BSA act as nitrogen donors and surface stabilizing agents to generate a highly conductive and functionalized carbon heterostructure. The doped nitrogen was present in the form of pyridinic and pyrrolic states, as evidenced by XPS analysis. Organic N-doped MWCNTs with predominant pyridinic N atoms displayed superior charge transfer (RCT = 0.06 Ω) owing to their superior electrocatalytic activity. A DSSC fabricated with organic N-doped MWCNT heterostructures exhibited a high conversion efficiency of 9.55%, which was similar to that of a Pt cathode, with an efficiency of 9.89%. The superior electrochemical performance of organic N-doped MWCNT heterostructures is due to the high charge polarization arising from the difference in electronegativity between nitrogen and carbon as well as the structural strain caused by the cationic BSA protein complex. Our proposed system provides new routes for the synthesis of organic heteroatom-doped nanomaterials for promising energy storage devices.
- 29 August 2017
- Published by Springer Nature in Journal of Materials Science
- Vol. 52 (24) , 13920-13929
Enhanced ionic mobility and increased efficiency of dye-sensitized solar cell by adding lithium chloride in poly(vinylidene fluoride) nanofiber as electrolyte medium
- 29 August 2017
- Published by Springer Nature in Journal of Materials Science
- Vol. 52 (24) , 13920-13929
Enhanced ionic mobility and increased efficiency of dye-sensitized solar cell by adding lithium chloride in poly(vinylidene fluoride) nanofiber as electrolyte medium
- Open Access
- 12 April 2017
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 7 (34) , 20908-20918
A PVdF-based electrolyte membrane for a carbon counter electrode in dye-sensitized solar cells
This research demonstrates the design and operation of a dye-sensitized solar cell (DSSC) with a multi-walled carbon nanotube counter electrode (CE) and a pore-filled membrane consisting of polyvinylidene fluoride-co-hexafluoropropylene (PVdF-co-HFP) as an electrolyte. In this cell, the internal resistance was substantially reduced and the efficiency was found to be as high as 6.04% under 1 sun. For this purpose, a sequence of experiments was carried out to demonstrate that the PVdF-co-HFP membrane possessed superior porosity to absorbed electrolytes and is more compatible with MWCNT CE as compared to the commonly used liquid electrolyte. For a comparison of results, different types of DSSC assemblies composed of MWCNT CEs were fabricated with liquid-, gel- and electrolyte-filled PVdF-co-HFP membranes. Morphological studies showed that the PVdF-co-HFP membrane is a regular and highly porous nano-web which provides optimized interfacial contact with defect-rich MWCNT CE. Detachment of the carbon particles from the CE causes short circuits and lower efficiency of the DSSCs. The proposed DSSC design not only lowers the interfacial charge transfer resistance (RCT = 2.98 Ω) but also reduces the risk of short circuits in the cell. This sustainable and highly efficient DSSC structure provides a new method for the simple fabrication of flexible solar cells and electronic devices.
- 12 April 2017
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 7 (34) , 20908-20918
Open AccessA PVdF-based electrolyte membrane for a carbon counter electrode in dye-sensitized solar cells
This research demonstrates the design and operation of a dye-sensitized solar cell (DSSC) with a multi-walled carbon nanotube counter electrode (CE) and a pore-filled membrane consisting of polyvinylidene fluoride-co-hexafluoropropylene (PVdF-co-HFP) as an electrolyte. In this cell, the internal resistance was substantially reduced and the efficiency was found to be as high as 6.04% under 1 sun. For this purpose, a sequence of experiments was carried out to demonstrate that the PVdF-co-HFP membrane possessed superior porosity to absorbed electrolytes and is more compatible with MWCNT CE as compared to the commonly used liquid electrolyte. For a comparison of results, different types of DSSC assemblies composed of MWCNT CEs were fabricated with liquid-, gel- and electrolyte-filled PVdF-co-HFP membranes. Morphological studies showed that the PVdF-co-HFP membrane is a regular and highly porous nano-web which provides optimized interfacial contact with defect-rich MWCNT CE. Detachment of the carbon particles from the CE causes short circuits and lower efficiency of the DSSCs. The proposed DSSC design not only lowers the interfacial charge transfer resistance (RCT = 2.98 Ω) but also reduces the risk of short circuits in the cell. This sustainable and highly efficient DSSC structure provides a new method for the simple fabrication of flexible solar cells and electronic devices.
- 1 November 2016
- Published by Elsevier in Carbohydrate Polymers
- Vol. 152, 19-25
Fabrication of a flexible and conductive lyocell fabric decorated with graphene nanosheets as a stable electrode material
- 1 November 2016
- Published by Elsevier in Carbohydrate Polymers
- Vol. 152, 19-25
Fabrication of a flexible and conductive lyocell fabric decorated with graphene nanosheets as a stable electrode material
Highly Functional TNTs with Superb Photocatalytic, Optical, and Electronic Performance Achieving Record PV Efficiency of 10.1% for 1D‐Based DSSCs
Different nanostructures of TiO2 play an important role in the photocatalytic and photoelectronic applications. TiO2 nanotubes (TNTs) have received increasing attention for these applications due to their unique physicochemical properties. Focusing on highly functional TNTs (HF‐TNTs) for photocatalytic and photoelectronic applications, this study describes the facile hydrothermal synthesis of HF‐TNTs by using commercial and cheaper materials for cost‐effective manufacturing. To prove the functionality and applicability, these TNTs are used as scattering structure in dye‐sensitized solar cells (DSSCs). Photocatalytic, optical, Brunauer‐Emmett‐Teller (BET), electrochemical impedance spectrum, incident‐photon‐to‐current efficiency, and intensity‐modulated photocurrent spectroscopy/intensity‐modulated photovoltage spectroscopy characterizations are proving the functionality of HF‐TNTs for DSSCs. HF‐TNTs show 50% higher photocatalytic degradation rate and also 68% higher dye loading ability than conventional TNTs (C‐TNTs). The DSSCs having HF‐TNT and its composite‐based multifunctional overlayer show effective light absorption, outstanding light scattering, lower interfacial resistance, longer electron lifetime, rapid electron transfer, and improved diffusion length, and consequently, J SC, quantum efficiency, and record photoconversion efficiency of 10.1% using commercial N‐719 dye is achieved, for 1D‐based DSSCs. These new and highly functional TNTs will be a concrete fundamental background toward the development of more functional applications in fuel cells, dye‐sensitized solar cells, Li‐ion batteries, photocatalysis process, ion‐exchange/adsorption process, and photoelectrochemical devices.
Highly Functional TNTs with Superb Photocatalytic, Optical, and Electronic Performance Achieving Record PV Efficiency of 10.1% for 1D‐Based DSSCs
Different nanostructures of TiO2 play an important role in the photocatalytic and photoelectronic applications. TiO2 nanotubes (TNTs) have received increasing attention for these applications due to their unique physicochemical properties. Focusing on highly functional TNTs (HF‐TNTs) for photocatalytic and photoelectronic applications, this study describes the facile hydrothermal synthesis of HF‐TNTs by using commercial and cheaper materials for cost‐effective manufacturing. To prove the functionality and applicability, these TNTs are used as scattering structure in dye‐sensitized solar cells (DSSCs). Photocatalytic, optical, Brunauer‐Emmett‐Teller (BET), electrochemical impedance spectrum, incident‐photon‐to‐current efficiency, and intensity‐modulated photocurrent spectroscopy/intensity‐modulated photovoltage spectroscopy characterizations are proving the functionality of HF‐TNTs for DSSCs. HF‐TNTs show 50% higher photocatalytic degradation rate and also 68% higher dye loading ability than conventional TNTs (C‐TNTs). The DSSCs having HF‐TNT and its composite‐based multifunctional overlayer show effective light absorption, outstanding light scattering, lower interfacial resistance, longer electron lifetime, rapid electron transfer, and improved diffusion length, and consequently, J SC, quantum efficiency, and record photoconversion efficiency of 10.1% using commercial N‐719 dye is achieved, for 1D‐based DSSCs. These new and highly functional TNTs will be a concrete fundamental background toward the development of more functional applications in fuel cells, dye‐sensitized solar cells, Li‐ion batteries, photocatalysis process, ion‐exchange/adsorption process, and photoelectrochemical devices.
- 1 July 2016
- Published by Elsevier in Journal of Power Sources
- Vol. 319, 90-98
Flexible and conductive cotton fabric counter electrode coated with graphene nanosheets for high efficiency dye sensitized solar cell
- 1 July 2016
- Published by Elsevier in Journal of Power Sources
- Vol. 319, 90-98
Flexible and conductive cotton fabric counter electrode coated with graphene nanosheets for high efficiency dye sensitized solar cell