Hamid Gadouri
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hamid Gadouri has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
Mohamed Ghrici
Geomaterials Laboratory, Civil Engineering Department, Hassiba Benbouali University, Chlef, Algeria
10 shared publicationsKhelifa Harichane
Geomaterials Laboratory, Civil Engineering Department, Hassiba Benbouali University, Chlef, Algeria
9 shared publications- Brahim Meziani
Department of Earth Sciences, Faculty of Natural and Life Sciences and Earth Sciences, Khemis Miliana University, Road Theniet El-Had, 44225 Khemis-Miliana, Algeria
2 shared publications Abdelmoumen Aala-Eddin Driss
Geomaterials Laboratory, Civil Engineering Department, Hassiba Benbouali University, Chlef, Algeria
1 shared publication- Ammar Nechnech
USTHB
1 shared publication Bakhta Boukhatem
Geomaterials Laboratory, Department of Civil Engineering, University of Chlef, Chlef, Algeria
1 shared publication
Latest Publications
- Open Access
- 26 September 2024
- Published by SPIE-Intl Soc Optical Eng
- Vol. 13279, 5-510
Polypropylene fiber’s effect on CBR in lime-stabilized sulfate-contaminated expansive clay
There is no online version at this time. Please download the PDF instead.
- 26 September 2024
- Published by SPIE-Intl Soc Optical Eng
- Vol. 13279, 5-510
Open AccessPolypropylene fiber’s effect on CBR in lime-stabilized sulfate-contaminated expansive clay
There is no online version at this time. Please download the PDF instead.
- 23 March 2021
- Published by Taylor & Francis in Geomechanics and Geoengineering
- Vol. 17 (3) , 896-908
Assessing the effect of moulding water content on the behaviour of lime-stabilised an expansive soil
There are several factors that affect the efficiency of soil stabilisation and their strength gain. In fact, the proportion of mixing is one of these factors which include mixing conditions, degree and timing of mixing, the quantity of hardening agent and moulding water content. An experimental study was undertaken in order to assess the effect of moulding water content (MWC) on some geotechnical properties of lime-stabilised an expansive soil. Lime was mixed with the studied soil within the range of 0% to 8%. All samples were performed according to three different conditions at different curing periods. The obtained results showed that the increase in lime content reduces the maximum dry density (MDD) and increases the optimum moisture content (OMC) where the increase in lime content causes a decrease in the specific gravity (Gs) with an increase in the void ratio. The unconfined compressive strength (UCS) of lime-treated high plastic clay increases with increasing lime content for the different conditions. Also, samples prepared at OMC and MDD develop very high UCS values compared to those prepared with a dry and wet side of optimum.
- 23 March 2021
- Published by Taylor & Francis in Geomechanics and Geoengineering
- Vol. 17 (3) , 896-908
Assessing the effect of moulding water content on the behaviour of lime-stabilised an expansive soil
There are several factors that affect the efficiency of soil stabilisation and their strength gain. In fact, the proportion of mixing is one of these factors which include mixing conditions, degree and timing of mixing, the quantity of hardening agent and moulding water content. An experimental study was undertaken in order to assess the effect of moulding water content (MWC) on some geotechnical properties of lime-stabilised an expansive soil. Lime was mixed with the studied soil within the range of 0% to 8%. All samples were performed according to three different conditions at different curing periods. The obtained results showed that the increase in lime content reduces the maximum dry density (MDD) and increases the optimum moisture content (OMC) where the increase in lime content causes a decrease in the specific gravity (Gs) with an increase in the void ratio. The unconfined compressive strength (UCS) of lime-treated high plastic clay increases with increasing lime content for the different conditions. Also, samples prepared at OMC and MDD develop very high UCS values compared to those prepared with a dry and wet side of optimum.
- Open Access
- 1 December 2020
- Published by Academy of Science of South Africa in Journal of the South African Institution of Civil Engineering
- Vol. 62 (4) , 2-10
Geotechnical characterisation and back analysis of a landslide in marl deposit: A case study of Algiers Sahel (coast), Algeria
- 1 December 2020
- Published by Academy of Science of South Africa in Journal of the South African Institution of Civil Engineering
- Vol. 62 (4) , 2-10
Open AccessGeotechnical characterisation and back analysis of a landslide in marl deposit: A case study of Algiers Sahel (coast), Algeria
- 18 July 2019
- Published by Springer Nature in Arabian Journal of Geosciences
- Vol. 12 (15) , 1-11
Natural pozzolana used as a source of silica for improving the behaviour of lime–stabilised clayey soil
- 18 July 2019
- Published by Springer Nature in Arabian Journal of Geosciences
- Vol. 12 (15) , 1-11
Natural pozzolana used as a source of silica for improving the behaviour of lime–stabilised clayey soil
- 16 November 2018
- Published by Taylor & Francis in Marine Georesources & Geotechnology
- Vol. 37 (9) , 1130-1148
Effect of sulphates and curing period on stress–strain curves and failure modes of soil–lime–natural pozzolana mixtures
An experimental investigation was undertaken in order to assess the effect of sodium (Na2SO4) and calcium (CaSO4·2H2O) sulphates and curing period on stress–strain curves and failure modes of grey (GS) and red (RS) clayey soils stabilised by lime (L), natural pozzolana (NP) and their combinations (L–NP). Several soil–L–NP mixtures were studied to be used as subgrade soils for road pavements. Stress–strain curves were obtained from unconfined compressive strength (UCS) test made on several soil–L–NP specimens after curing for 7 and 120 days. Tests results showed that the use of L or L–NP without sulphates produced a significant increase in peaks stress of both clayey soils and then modified their stress–strain curves from nonlinear to linear behaviour almost up to 70% of peak stress after a longer curing period. However, the presence of 2% Na2SO4 or any CaSO4·2H2O content provided beneficial effects on peaks stress and stress–strain curves of both stabilised clayey soils and then improved their linearity almost up to 95% of peak stress after curing for 120 days. In contrast, the presence of 6% Na2SO4 caused undesirable effects. In addition, both sulphates greatly affected the failure modes of soil–L–NP specimens, particularly at a later stage.
- 16 November 2018
- Published by Taylor & Francis in Marine Georesources & Geotechnology
- Vol. 37 (9) , 1130-1148
Effect of sulphates and curing period on stress–strain curves and failure modes of soil–lime–natural pozzolana mixtures
An experimental investigation was undertaken in order to assess the effect of sodium (Na2SO4) and calcium (CaSO4·2H2O) sulphates and curing period on stress–strain curves and failure modes of grey (GS) and red (RS) clayey soils stabilised by lime (L), natural pozzolana (NP) and their combinations (L–NP). Several soil–L–NP mixtures were studied to be used as subgrade soils for road pavements. Stress–strain curves were obtained from unconfined compressive strength (UCS) test made on several soil–L–NP specimens after curing for 7 and 120 days. Tests results showed that the use of L or L–NP without sulphates produced a significant increase in peaks stress of both clayey soils and then modified their stress–strain curves from nonlinear to linear behaviour almost up to 70% of peak stress after a longer curing period. However, the presence of 2% Na2SO4 or any CaSO4·2H2O content provided beneficial effects on peaks stress and stress–strain curves of both stabilised clayey soils and then improved their linearity almost up to 95% of peak stress after curing for 120 days. In contrast, the presence of 6% Na2SO4 caused undesirable effects. In addition, both sulphates greatly affected the failure modes of soil–L–NP specimens, particularly at a later stage.
- 3 September 2018
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 21 (7) , 939-953
Best-fit models for predicting the geotechnical properties of FA–stabilised problematic soils used as materials for earth structures
The effect of fly ash (FA) on geotechnical properties of high plasticity clayey soils (known as problematic soils) has been investigated by several researchers. However, few studies have been developed to predict the geotechnical properties of FA–stabilised problematic soils. This study was undertaken in order to develop best-fit models for predicting the Atterberg limits (liquid limit; LL and plasticity index; PI), unconfined compressive strength (UCS), free swell index (FS), optimum moisture content (OMC) and maximum dry density (MDD) of FA-stabilised high plasticity clayey soils. For this purpose, many data sources were collected from several laboratory studies published in the literature over the past. All the developed models were validated and found to have a good ability where they can be used as a reliable tool to predict all the LL, PI, UCS, FS, MDD and OMC of FA-stabilised high plasticity clayey soils. In addition, the suggested models showed that the accurate prediction of all the studied physico-mechanical properties was highly beneficial for the engineering construction enabling it to avoid the cumbersome tests in the laboratory. From these results, the obtained equations may be useful in practices of civil engineering projects and in designing earth structures such as roadway subgrades, road embankments, trench backfills, landfill liners and earth dams.
- 3 September 2018
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 21 (7) , 939-953
Best-fit models for predicting the geotechnical properties of FA–stabilised problematic soils used as materials for earth structures
The effect of fly ash (FA) on geotechnical properties of high plasticity clayey soils (known as problematic soils) has been investigated by several researchers. However, few studies have been developed to predict the geotechnical properties of FA–stabilised problematic soils. This study was undertaken in order to develop best-fit models for predicting the Atterberg limits (liquid limit; LL and plasticity index; PI), unconfined compressive strength (UCS), free swell index (FS), optimum moisture content (OMC) and maximum dry density (MDD) of FA-stabilised high plasticity clayey soils. For this purpose, many data sources were collected from several laboratory studies published in the literature over the past. All the developed models were validated and found to have a good ability where they can be used as a reliable tool to predict all the LL, PI, UCS, FS, MDD and OMC of FA-stabilised high plasticity clayey soils. In addition, the suggested models showed that the accurate prediction of all the studied physico-mechanical properties was highly beneficial for the engineering construction enabling it to avoid the cumbersome tests in the laboratory. From these results, the obtained equations may be useful in practices of civil engineering projects and in designing earth structures such as roadway subgrades, road embankments, trench backfills, landfill liners and earth dams.
- 1 January 2018
- Published by IGI Global Scientific Publishing in International Journal of Geotechnical Earthquake Engineering
- Vol. 9 (1) , 42-64
Benefits of Probabilistic Soil-Foundation-Structure Interaction Analysis
The present article highlights the beneficial effect of considering soil and structure parameters uncertainties on the soil-structure response. The impedance functions of a circular foundation resting on a random soil layer over a homogeneous half-space were obtained by using cone models. The obtained results showed that the randomness of the layer's thickness and the shear wave velocity significantly affected the mean spring coefficients whereby coefficients of variation (COV) of 10% and 20% in these parameters reduced the mean spring coefficients about 32% and 40%, respectively, for the horizontal motion and about 12.5% and 25%, respectively, for the rocking motion. The sensitivity of the mean structural response to the randomness effect was obtained to be more pronounced to structural parameters than to soil parameters. In addition, 20% COV in both soil and structure parameters reduced the mean structural response about 39%, translated by an increase in the damping of the coupled system which may be considered as a beneficial effect from code provisions point of view.
- 1 January 2018
- Published by IGI Global Scientific Publishing in International Journal of Geotechnical Earthquake Engineering
- Vol. 9 (1) , 42-64
Benefits of Probabilistic Soil-Foundation-Structure Interaction Analysis
The present article highlights the beneficial effect of considering soil and structure parameters uncertainties on the soil-structure response. The impedance functions of a circular foundation resting on a random soil layer over a homogeneous half-space were obtained by using cone models. The obtained results showed that the randomness of the layer's thickness and the shear wave velocity significantly affected the mean spring coefficients whereby coefficients of variation (COV) of 10% and 20% in these parameters reduced the mean spring coefficients about 32% and 40%, respectively, for the horizontal motion and about 12.5% and 25%, respectively, for the rocking motion. The sensitivity of the mean structural response to the randomness effect was obtained to be more pronounced to structural parameters than to soil parameters. In addition, 20% COV in both soil and structure parameters reduced the mean structural response about 39%, translated by an increase in the damping of the coupled system which may be considered as a beneficial effect from code provisions point of view.
- 7 June 2017
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 20 (7) , 761-774
Assessment of sulphates effect on pH and pozzolanic reactions of soil–lime–natural pozzolana mixtures
- 7 June 2017
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 20 (7) , 761-774
Assessment of sulphates effect on pH and pozzolanic reactions of soil–lime–natural pozzolana mixtures
- 19 May 2017
- Published by Taylor & Francis in International Journal of Geotechnical Engineering
- Vol. 13 (2) , 191-203
Prediction of geotechnical properties of clayey soils stabilised with lime using artificial neural networks (ANNs)
Clayey soils are known as problematic soils for geotechnical engineering since several years. The effect of mineral additives on geotechnical properties of clayey soils has been many times investigated. However, there are a few investigations about the use of artificial neural networks (ANNs) for predicting the geotechnical properties of stabilised soils, all the same, the ANNs can be successfully used in this field. The accurate prediction of plasticity index (PI), maximum dry density (MDD) and optimum moisture content (OMC) is beneficial for the construction engineering in order to avoid the cumbersome tests in the laboratory. The aim of this research is to develop three models with good performances based on ANNs, and to predict all the PI, OMC and MDD values of subgrade soil stabilised with the addition of lime, using basic soil parameters which are always available for engineers. Three different models are developed which each one corresponding to the best architecture for the three properties where these models can be used as a reliable tool to predict the PI, OMC and MDD of clayey soils stabilised with lime.
- 19 May 2017
- Published by Taylor & Francis in International Journal of Geotechnical Engineering
- Vol. 13 (2) , 191-203
Prediction of geotechnical properties of clayey soils stabilised with lime using artificial neural networks (ANNs)
Clayey soils are known as problematic soils for geotechnical engineering since several years. The effect of mineral additives on geotechnical properties of clayey soils has been many times investigated. However, there are a few investigations about the use of artificial neural networks (ANNs) for predicting the geotechnical properties of stabilised soils, all the same, the ANNs can be successfully used in this field. The accurate prediction of plasticity index (PI), maximum dry density (MDD) and optimum moisture content (OMC) is beneficial for the construction engineering in order to avoid the cumbersome tests in the laboratory. The aim of this research is to develop three models with good performances based on ANNs, and to predict all the PI, OMC and MDD values of subgrade soil stabilised with the addition of lime, using basic soil parameters which are always available for engineers. Three different models are developed which each one corresponding to the best architecture for the three properties where these models can be used as a reliable tool to predict the PI, OMC and MDD of clayey soils stabilised with lime.