Tan Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Tan Zhang has a total of 56 co-authors. Here are the top co-authors by number of shared publications:
- Frank Dennis Blum
Oklahoma State University
8 shared publications - Farhad Daneshvar
Intel Ronler Acres Campus
4 shared publications Gu Xu
Brewer Science Inc., Rolla, Missouri, USA
4 shared publicationsHung-Jue Sue
4 shared publicationsFarhad Daneshvar
Polymer Technology Center, Department of Materials Science and Engineering, Texas A&M University, College Station, Texas 77843, United States
3 shared publications- Hung-Jue Sue
Texas A&M University
3 shared publications
Latest Publications
- Open Access
- 19 May 2026
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 16 (29) , 26988-27007
Initiating radical polymerization at room temperature: Why and How?
The energy consumption of high-temperature radical polymerizations affects the environment and human health.
- 19 May 2026
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 16 (29) , 26988-27007
Open AccessInitiating radical polymerization at room temperature: Why and How?
The energy consumption of high-temperature radical polymerizations affects the environment and human health.
- 17 February 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (9) , 5009-5017
How Chloride Ions Catalyze the Hydrothermal Synthesis of Copper Nanocrystals
Hydrothermal reduction of Cu(II) ions is a convenient method to produce Cu nanocrystals, but the reason for the dominant use of CuCl2 as the Cu source is unknown. This work demonstrates that the formation of oxides during the redox reaction is due to the attack of the OH- ions. Cl- ions, along with other halide ions, can form a stable complex with Cu ions and alkylamine ligands, which repels OH- ions effectively in an aqueous environment. The involvement of the counterions through hydrogen bonding leads to oxide formation. Simulations confirmed the stability of these complexes with different counterions. Cl- ions also act as catalysts to enhance the ligand-to-metal charge transfer and lower the energy required for Cu ion reduction. In the presence of additional Cl- ions, the temperature for Cu(II)-Cu(0) reduction was lowered, converting a hydrothermal reaction to a relatively safe one at ambient pressure. Upon Cu seed formation, Cl- ions are intrinsically present on the Cu facets to regulate the subsequent growth of the Cu seeds. Thinner Cu nanowires were produced in the presence of additional Cl- ions at lower temperatures. Cl- ions can be a cost-effective catalyst for the energy-efficient and safer synthesis of Cu nanocrystals.
- 17 February 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (9) , 5009-5017
How Chloride Ions Catalyze the Hydrothermal Synthesis of Copper Nanocrystals
Hydrothermal reduction of Cu(II) ions is a convenient method to produce Cu nanocrystals, but the reason for the dominant use of CuCl2 as the Cu source is unknown. This work demonstrates that the formation of oxides during the redox reaction is due to the attack of the OH- ions. Cl- ions, along with other halide ions, can form a stable complex with Cu ions and alkylamine ligands, which repels OH- ions effectively in an aqueous environment. The involvement of the counterions through hydrogen bonding leads to oxide formation. Simulations confirmed the stability of these complexes with different counterions. Cl- ions also act as catalysts to enhance the ligand-to-metal charge transfer and lower the energy required for Cu ion reduction. In the presence of additional Cl- ions, the temperature for Cu(II)-Cu(0) reduction was lowered, converting a hydrothermal reaction to a relatively safe one at ambient pressure. Upon Cu seed formation, Cl- ions are intrinsically present on the Cu facets to regulate the subsequent growth of the Cu seeds. Thinner Cu nanowires were produced in the presence of additional Cl- ions at lower temperatures. Cl- ions can be a cost-effective catalyst for the energy-efficient and safer synthesis of Cu nanocrystals.
- Open Access
- 7 May 2024
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
- Vol. 9 (9) , 2282-2292
Synthesis of acrylonitrile–butadiene–styrene copolymers through interface-initiated room-temperature polymerization
AIBN initiators decomposed efficiently at the oil–water interface at room temperature. The interface-initiated room-temperature polymerization produced ductile ABS copolymer monoliths.
- 7 May 2024
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
- Vol. 9 (9) , 2282-2292
Open AccessSynthesis of acrylonitrile–butadiene–styrene copolymers through interface-initiated room-temperature polymerization
AIBN initiators decomposed efficiently at the oil–water interface at room temperature. The interface-initiated room-temperature polymerization produced ductile ABS copolymer monoliths.
- Open Access
Synthesis of Polymers with Narrow Molecular Mass Distribution through Interface-Initiated Room-Temperature Polymerization in Emulsion Gels
Homopolymers of n-butyl acrylate, methyl methacrylate, styrene, and their random copolymers were prepared via interface-initiated polymerization of emulsion gels at 20 °C. The polymerization was conducted in a free radical polymerization manner without inert gas protection. Compared with the polymers synthesized at 60 °C, the polymerization of emulsion gels at 20 °C produced homo- and copolymers with a higher molecular mass and a narrower molecular mass distribution. The polydispersity indices for the polymers synthesized at 20 °C were found to be between 1.12 and 1.37. The glass transition temperatures for the as-synthesized butyl acrylate copolymers agree well with the prediction from the Gordon–Taylor equation. Interface-initiated room-temperature polymerization is a robust, energy-saving polymerization technique for synthesizing polymers with a narrow molecular mass distribution.
Open AccessSynthesis of Polymers with Narrow Molecular Mass Distribution through Interface-Initiated Room-Temperature Polymerization in Emulsion Gels
Homopolymers of n-butyl acrylate, methyl methacrylate, styrene, and their random copolymers were prepared via interface-initiated polymerization of emulsion gels at 20 °C. The polymerization was conducted in a free radical polymerization manner without inert gas protection. Compared with the polymers synthesized at 60 °C, the polymerization of emulsion gels at 20 °C produced homo- and copolymers with a higher molecular mass and a narrower molecular mass distribution. The polydispersity indices for the polymers synthesized at 20 °C were found to be between 1.12 and 1.37. The glass transition temperatures for the as-synthesized butyl acrylate copolymers agree well with the prediction from the Gordon–Taylor equation. Interface-initiated room-temperature polymerization is a robust, energy-saving polymerization technique for synthesizing polymers with a narrow molecular mass distribution.
- 10 February 2023
- Published by Taylor & Francis in Polymer Reviews
- Vol. 63 (4) , 852-865
Eco-Friendly Room-Temperature Polymerization in Emulsions and Beyond
This review highlights the effectiveness and robust nature of eco-friendly room-temperature polymerization initiated in emulsions, and some of its applications in polymer and materials science. The polymerization in emulsions initiated through a thermal or redox approach can be safely conducted under ambient conditions without using other hazardous chemicals. Thermal initiators decompose efficiently at the surfactant-stabilized oil–water interfaces at room temperature. The interface-induced initiation is found to be somewhat independent of surfactant type, insensitive to oxygen, and works for several thermal initiators. Redox initiators without transition metal compounds also effectively initiate room-temperature polymerization in emulsions. With the assistance of room temperature initiation, the polymers synthesized at room temperature are of high molecular mass. In addition, room-temperature polymerization allows temperature-sensitive molecules, for example, proteins and enzymes, to be incorporated with the polymers in situ. The applications of room-temperature polymerization in high internal phase emulsions and biomedicine are also discussed. The initiation of radicals from oil–water interfaces or transition metal-free redox systems is a promising eco-friendly method to promote radical reactions at room temperature. Graphic Abstract
- 10 February 2023
- Published by Taylor & Francis in Polymer Reviews
- Vol. 63 (4) , 852-865
Eco-Friendly Room-Temperature Polymerization in Emulsions and Beyond
This review highlights the effectiveness and robust nature of eco-friendly room-temperature polymerization initiated in emulsions, and some of its applications in polymer and materials science. The polymerization in emulsions initiated through a thermal or redox approach can be safely conducted under ambient conditions without using other hazardous chemicals. Thermal initiators decompose efficiently at the surfactant-stabilized oil–water interfaces at room temperature. The interface-induced initiation is found to be somewhat independent of surfactant type, insensitive to oxygen, and works for several thermal initiators. Redox initiators without transition metal compounds also effectively initiate room-temperature polymerization in emulsions. With the assistance of room temperature initiation, the polymers synthesized at room temperature are of high molecular mass. In addition, room-temperature polymerization allows temperature-sensitive molecules, for example, proteins and enzymes, to be incorporated with the polymers in situ. The applications of room-temperature polymerization in high internal phase emulsions and biomedicine are also discussed. The initiation of radicals from oil–water interfaces or transition metal-free redox systems is a promising eco-friendly method to promote radical reactions at room temperature. Graphic Abstract
- Open Access
- 28 January 2023
- Published by Wiley in Advances in Polymer Technology
- Vol. 2023, 1-10
Low Temperature, In Situ Polymerization of Vinyl Acetate in Silica Containing Emulsion Gels
Vinyl acetate (VAc) was polymerized to about 90% conversion in 9 h at 40°C from the colloidal microstructure of the VAc/fumed silica/cetyltrimethylammonium bromide (CTAB) system. The glass transition () of poly(vinyl acetate) (PVAc) polymerized in these emulsion gels with silica was higher ( ) than those of PVAc made from bulk polymerization at 60°C ( ) and the weight average molar mass () was also larger ( about 300 kg/mol) than those from bulk polymerization ( ). Increased , , and lowered processing temperature for these composites could facilitate new applications for PVAc.
- 28 January 2023
- Published by Wiley in Advances in Polymer Technology
- Vol. 2023, 1-10
Open AccessLow Temperature, In Situ Polymerization of Vinyl Acetate in Silica Containing Emulsion Gels
Vinyl acetate (VAc) was polymerized to about 90% conversion in 9 h at 40°C from the colloidal microstructure of the VAc/fumed silica/cetyltrimethylammonium bromide (CTAB) system. The glass transition () of poly(vinyl acetate) (PVAc) polymerized in these emulsion gels with silica was higher ( ) than those of PVAc made from bulk polymerization at 60°C ( ) and the weight average molar mass () was also larger ( about 300 kg/mol) than those from bulk polymerization ( ). Increased , , and lowered processing temperature for these composites could facilitate new applications for PVAc.
- 17 August 2020
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 2 (9) , 2692-2698
Ultralong Electrospun Copper–Carbon Nanotube Composite Fibers for Transparent Conductive Electrodes with High Operational Stability
- 17 August 2020
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 2 (9) , 2692-2698
Ultralong Electrospun Copper–Carbon Nanotube Composite Fibers for Transparent Conductive Electrodes with High Operational Stability
- 11 August 2020
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 12 (33) , 17437-17449
Copper(i)–alkylamine mediated synthesis of copper nanowires
Formation of a Cu(i)–alkylamine (1 : 2) complex is found to be the key step for Cu(ii) ions to reduce to Cu(0) in the presence of glucose, which completes the mechanism for the hydrothermal synthesis of Cu nanocrystals.
- 11 August 2020
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 12 (33) , 17437-17449
Copper(i)–alkylamine mediated synthesis of copper nanowires
Formation of a Cu(i)–alkylamine (1 : 2) complex is found to be the key step for Cu(ii) ions to reduce to Cu(0) in the presence of glucose, which completes the mechanism for the hydrothermal synthesis of Cu nanocrystals.
- 8 November 2019
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 2 (12) , 7775-7784
Solution-Processable Oxidation-Resistant Copper Nanowires Decorated with Alkyl Ligands
- 8 November 2019
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 2 (12) , 7775-7784
Solution-Processable Oxidation-Resistant Copper Nanowires Decorated with Alkyl Ligands