Weiqiang Lv

Weiqiang Lv

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Weiqiang Lv has a total of 156 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Oxygen-Vacancy-Mediated Triple Synergy in Gd-Doped Ceria Fillers Enables Dendrite-Free Solid-State Lithium Metal Batteries

    by Tian Ouyang, Zongqing Tian, Taoda Liu, Yuhang Dou, Sheng Ma, Zhiwei Peng, Xiaoling He, Guangzhong Li, Wenyan Tao, Yinghua Niu, et al.

    Solid-state polymer electrolytes (SPEs) suffer from a persistent trade-off between sluggish ion transport and unstable electrode–electrolyte interface. Herein, a synergistic “polymer grafting–inorganic defect” strategy is proposed to simultaneously address both bottlenecks. A low-crystallinity poly(vinylidene fluoride) (PVDF) matrix is first obtained via lithium sulfonate grafting (denoted as PVDF-STFE), which disrupts polymer chain packing and provides additional Li+ hopping sites. Into this matrix, we incorporated gadolinium-doped ceria (GDC) fillers rich in intrinsic oxygen vacancies. These vacancies act as strong Lewis acid sites that perform three coordinated functions: (i) anchoring TFSI– anions to promote salt dissociation, raising the Li+ transference number to 0.84; (ii) further disrupting polymer chain ordering to reduce crystallinity, lowering the activation energy for ion transport; and (iii) homogenizing interfacial Li+ flux to suppress dendritic growth. Control experiments using pristine CeO2, structurally identical but vacancy-deficient, confirm that oxygen vacancies, not mere physical filling, dominate these synergistic effects. The composite electrolyte comprising PVDF-STFE and GDC (denoted as PS-GDC) delivers a high room-temperature ionic conductivity (8.91 × 10–4 S cm–1), a wide electrochemical window over 5.0 V, and enables dendrite-free Li deposition as evidenced by post-cycling scanning electron microscopy (SEM). Quantitative X-ray photoelectron spectroscopy (XPS) reveals the formation of a LiF-enriched (65.11%) and parasitic-poor (24.02% Li–O species) solid electrolyte interphase. Consequently, the assembled LiFePO4||Li cell retains 71.4% of its initial capacity after 400 cycles at 0.5 C and demonstrates stable operation up to 5 C. This work establishes a defect-mediated interfacial paradigm for designing a robust composite SPE.

  • Surface‐Engineered LSCF Electrode via PrNi 0.7 Co 0.3 O 3–δ Infiltration for Superior Performance and Stability in Reversible Protonic Ceramic Cells

    by Yinghua Niu, Muhammad Waqas, Shafiq Ur Rehman, Mengjun Tang, Sheng Ma, Modeste Venin Mendieev Nitou, Bismark Boateng, Weiqiang Lv

    The reversible protonic ceramic cells (R‐PCCs) have been extensively researched for power generation and hydrogen production at low and intermediate temperatures. However, sluggish kinetics of the air electrode at low temperatures, coupled with the lack of durability under high steam environments, hinder commercialization. In this work, we developed an air electrode with high catalytic activity and durability by surface‐modifying conventional La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3‐δ (LSCF) using single‐layer perovskite PrNi 0.7 Co 0.3 O 3‐δ (PNC‐73) through solution infiltration. PNC‐73 is a triple‐conducting oxide (TCO) that extends proton conduction paths from the triple‐phase boundary (TPB) to the bulk surface, unlike conventional air electrodes. Additionally, PrO 2 phase formation during infiltration creates oxygen vacancies, improving catalytic activity. PNC‐73‐coated LSCF exhibited a polarization resistance ( R p ) of 0.30 Ω . cm 2 at 650°C under both dry/humidified conditions, four times lower than the bare LSC. Furthermore, the infiltration reduced the degradation rate to 6.5 × 10 −4 Ω·cm 2 ·h −1 , nearly half that of bare LSCF (12.1 × 10 −4 Ω·cm 2 ·h −1 ) under a 30 v.% H 2 O environment at 650°C. The single cell (Ni‐BZCYYb/BZCYYb/LSCF‐PNC‐73) demonstrated a power density of 500 mW·cm −2 at 700°C in fuel cell mode and a current density of 2.80 A·cm −2 at 1.3 V in electrolysis mode, higher than bare LSCF air electrodes. This research provides direction to mitigate major conventional air electrodes issues in R‐PCCs, highlighting commercial viability.


  • Tunable ionic conductivity in halide electrolytes through cation ion exchange and channel engineering

    by Zhiwei Peng, Jiaqi Wang, Asad Mehboob, Taoda Liu, Zongqing Tian, Yuhang Dou, Tian Ouyang, Yinghua Niu, Weiqiang Lv

    Halide solid electrolytes hold great promise for all-solid-state batteries, yet their ionic conductivity requires further optimization. This study demonstrates a powerful strategy for tuning ionic transport in Li2ZrCl6 through cation ion exchange and precise channel engineering. Using first-principles calculations, we show that replacing Li+ with Na+ in the Li2 − 2xNa2xZrCl6 system induces controlled lattice expansion, which directly engineers the size and geometry of ion migration channels. This enables remarkable tunability: Li+ conductivity is enhanced by two orders of magnitude, reaching 2.1 mS/cm for x = 0.75, while the migration barrier plummets from 0.298 to 0.044 eV. Crucially, the conductivity is anisotropic and dependent on the exchange pattern; a-axis-aligned Na+ creates channels (∼1.87 Å) optimal for Li+ mobility, whereas c-axis alignment yields channels (∼1.81 Å) that favor Na+ diffusion. This work establishes cation ion exchange as a fundamental lever for channel engineering, providing a direct pathway to design high-performance, tunable solid electrolytes.

  • Divergent A-site regulation mechanisms in rare-earth and alkaline-earth nickelates for unlocking bifunctional oxygen electrocatalysis

    by Taoda Liu, Yuhang Dou, Tian Ouyang, Sheng Ma, Zongqing Tian, Zhiwei Peng, Xiaoling He, Wenyan Tao, Yinghua Niu, Weiqiang Lv

    A-site ORR/OER activity regulation in ANiO₃ nickelates: alkaline-earth systems follow a linear correlation, while rare-earth systems show f-electron modulated volcano, with EuNiO 3 as optimal bifunctional O 2 electrocatalyst.


  • Strontium‐Induced Lattice Oxygen Activation in Pr‐Based Perovskites for High‐Efficiency Water Oxidation

    by Sheng Ma, Xinze Li, Taoda Liu, Ke Yuan, Mengjun Tang, Waqas Muhammad, Xiaoling He, Tian Ouyang, Xiao Zhang, Wenyan Tao, et al.

    The development of low‐cost and high‐performance noble‐metal‐free catalysts for the oxygen evolution reaction (OER) is central to advancing alkaline water electrolysis. This work introduces a novel “composition–thermal history” design strategy, synergistically combining controlled A‐site Sr 2+ doping with optimized high‐temperature sintering (950°C) in Pr‐based perovskite. The resulting Pr 0.75 Sr 0.25 Ni 0.7 Co 0.3 O 3 (PSNC‐25) exhibits unprecedented nanostructuring and a maximized concentration of oxygen vacancies, unlocking efficient OER via lattice oxygen‐mediated mechanism. Sr‐induced lattice distortion drastically reduces oxygen vacancy formation energy from 2.06 to 1.14 eV, promoting facile lattice oxygen participation. Thermal engineering stabilizes high‐valence Co 4+ /Ni 3+ states and enhances M─O covalency. Electrochemically, PSNC‐25 achieves exceptional activity in 1 M KOH: a low overpotential of 389 mV at 10 mA cm −2 and a Tafel slope of 83 mV dec −1 , significantly surpassing undoped PrNi 0.7 Co 0.3 O 3 (η 10 > 570 mV). It also exhibits robust durability, by > 120 h chronopotentiometry at 10 mA cm −2 with only ∼45 mV potential drift. This work establishes a rational framework for activating LOM in cost‐effective perovskites through dopant‐induced electronic modulation and nano‐structural control, advancing scalable green hydrogen production.


  • Synergistic electronic descriptors for BaMO3 (M=Sc to Zn) perovskite ORR/OER electrocatalysis: Decoding bond strength, orbital hybridization, and electron transfer synergy

    by Taoda Liu, Sheng Ma, Xiao Zhang, Jiaqi Wang, Zongqing Tian, Yuhang Dou, Zhiwei Peng, Tian Ouyang, Bogang Lin, Xiaoling He, et al.


  • Open Access

    Advances in cathode’s microstructure modification to boost performance of lithium–sulfur batteries

    by Modeste Venin Mendieev Nitou, Yu Wu, Muhammad Waqas, Ziheng Zhang, Daiqian Chen, Hesheng Yu, Mengjun Tang, Xiaodong Fang, Rui Liu, Yashuai Pang, et al.


  • Lithographic Innovations in the Development of Solid Oxide Cells: Techniques, Advancements, and Prospects

    by Muhammad Waqas, Yinghua Niu, Mengjun Tang, Birkneh Sirak Teketel, Weirong Huo, Shuwei Hao, Weiqiang Lv

    Solid oxide cells (SOCs) are crucial in energy conversion and storage technologies owing to their versatile properties and reversible operation. Lithographic techniques are used to pattern and fabricate different components of SOCs, facilitating the development of micro‐ and single‐unit SOCs. Here the lithographic techniques used in SOCs development are discussed, highlighting their impact on optimizing component structures at the micro‐ and nanoscale. Here it is focused on the role of lithographic techniques in improving the electrolyte–electrode interface, enhancing ion conduction and surface exchange, reducing operating temperatures, impacting the surface area of electrodes, and addressing challenges like thermomechanical instabilities and material degradation. Various lithographic techniques are analyzed and discussed for their ability to enhance SOC performance. These techniques enable precise control over micro‐ and nanoscale structures, improving the electrochemical performance and durability of SOCs. Moreover, the application of lithography in addressing scalability issues for mass production and reducing fabrication defects is also discussed in detail. Emerging trends and prospects in lithographic innovations are also presented, providing a comprehensive outlook on how these techniques can help overcome current limitations in SOC technology. Integrating lithographic methods promises to revolutionize SOCs, making them more efficient and viable for various clean and sustainable energy applications.


  • Enhancement of Ionic Conductivity in NASICON‐Structured Li3(Zr,Ti)2(Si,Ge)2PO12: An Ab Initio Study

    by Jiaqi Wang, Weirong Huo, Zhiwei Peng, Zongqing Tian, Shafiq Ur Rehman, Zongwei Mei, Yinghua Niu, Weiqiang Lv

    The development of solid electrolytes with high ionic conductivity is crucial for advancing solid lithium‐ion battery technology but is still a challenge. In this study, the ionic conductivity of NASICON‐structured materials Li3(Zr,Ti)2(Si,Ge)2PO12 are explored through ab initio molecular dynamics (AIMD) simulations. This investigation reveals the significant impact of isovalent substitution on the lithium‐ion diffusion pathways and the associated energy barriers. Elemental substitutions, such as replacing Zr with Ti, significantly reduce the Li site energy levels, enhance the polyhedral volume, and change the coordination structure from four‐coordinate to five‐coordinate, thereby facilitating lithium‐ion migration. Conversely, substituting Si with Ge reduces the diffusion channel size and increases fluctuation of Li migration potential surface, leading to less favorable ion transport conditions. Li3Ti2Si2PO12 exhibits a room temperature ionic conductivity of 5.79 × 10−2 Scm−1, 163% higher than that of the pristine Li3Zr2Si2PO12, with a reduced diffusion barrier of 0.16 eV. Additionally, these analyses reveal that the critical size for effective diffusion channels is vital: below this threshold, ion migration is suppressed; while above it, the channel size no longer limits migration.