Xiaojun He
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Xiaojun He has a total of 135 co-authors. Here are the top co-authors by number of shared publications:
- Jieshan Qiu
State Key Laboratory of Chemical Resource Engineering, College of Chemical Engineering, Beijing University of Chemical Technology, Beijing, P. R. China
17 shared publications Dedong Jia
School of Chemistry and Chemical Engineering Key Laboratory of Metallurgical Emission Reduction and Resources Recycling Ministry of Education Anhui University of Technology Maanshan P. R. China
9 shared publicationsHongqiang Li
School of Chemistry and Chemical Engineering, Anhui Province Key Laboratory of Coal Clean Conversion and Low Carbon Utilization, Anhui Province Key Laboratory of Efficient Conversion and Solid-State Storage of Hydrogen & Electricity, Key Laboratory of Metallurgical Emission Reduction and Resources Recycling, Ministry of Education, Anhui University of Technology, Ma'anshan, Anhui, 243002, People's Republic of China
7 shared publications- Hongqiang Li
School of Chemistry and Chemical Engineering, Anhui Provincial Key Laboratory of Coal Clean Conversion and Low‐carbon Utilization, Key Laboratory of Metallurgical Emission Reduction & Resources Recycling, Ministry of Education Anhui University of Technology Maanshan China
7 shared publications Jun He
School of Chemistry and Chemical Engineering, Anhui Province Key Laboratory of Coal Clean Conversion and Low Carbon Utilization, Anhui Province Key Laboratory of Efficient Conversion and Solid-State Storage of Hydrogen & Electricity, Key Laboratory of Metallurgical Emission Reduction and Resources Recycling, Ministry of Education, Anhui University of Technology, Ma'anshan, Anhui, 243002, People's Republic of China
7 shared publicationsNan Xiao
School of Chemical Engineering, Dalian University of Technology, Dalian, People’s Republic of China
7 shared publications
Latest Publications
- Open Access
- 8 July 2026
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (32) , e71278
Harvesting Mn 2+ by Encapsulated MnO x With sp 2 ‐Carbon to Enhance the Mn 2+ /MnO 2 Conversion for High‐Capacity Zn‐Ion Batteries
Manganese oxide is a promising cathode material for aqueous Zn‐ion batteries (AZIBs), of which the key is to inhibit the dissolution of Mn 2+ and harvest Mn 2+ to achieve high‐capacity and long‐life. Herein, MnO x cathode is encapsulated into in situ formed sp 2 ‐carbon shell (denoted as CMC) via coating Mn‐based metal organic framework by coal tar pitch for Zn 2+ storage. Thanks to the in situ formed sp 2 ‐carbon shell in CMC, the formation energy of Mn vacancy is significantly increased, thus effectively inhibiting the dissolution of Mn 2+ . Meanwhile, a reversible Mn 2+ /MnO 2 conversion is achieved by harvesting Mn 2+ via electrostatic attraction, and preventing the formation of massive zinc hydroxide sulfate via repelling SO 4 2− and OH − . Moreover, the sp 2 ‐carbon shell with excellent conductivity enables effective re‐deposition of Mn 2+ to MnO 2 . As expected, the novel CMC cathode delivers an exceptional capacity of 438.2 mAh g −1 (889.5 mAh g −1 based on the mass of MnO x ) at 0.2 A g −1 with a capacity retention up to 91.1% over 5000 cycles at 2 A g −1 . This work proposes an effective strategy to synthesize advanced Mn‐based cathode materials to harvest Mn 2+ through interface engineering for AZIBs.
- 8 July 2026
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (32) , e71278
Open AccessHarvesting Mn 2+ by Encapsulated MnO x With sp 2 ‐Carbon to Enhance the Mn 2+ /MnO 2 Conversion for High‐Capacity Zn‐Ion Batteries
Manganese oxide is a promising cathode material for aqueous Zn‐ion batteries (AZIBs), of which the key is to inhibit the dissolution of Mn 2+ and harvest Mn 2+ to achieve high‐capacity and long‐life. Herein, MnO x cathode is encapsulated into in situ formed sp 2 ‐carbon shell (denoted as CMC) via coating Mn‐based metal organic framework by coal tar pitch for Zn 2+ storage. Thanks to the in situ formed sp 2 ‐carbon shell in CMC, the formation energy of Mn vacancy is significantly increased, thus effectively inhibiting the dissolution of Mn 2+ . Meanwhile, a reversible Mn 2+ /MnO 2 conversion is achieved by harvesting Mn 2+ via electrostatic attraction, and preventing the formation of massive zinc hydroxide sulfate via repelling SO 4 2− and OH − . Moreover, the sp 2 ‐carbon shell with excellent conductivity enables effective re‐deposition of Mn 2+ to MnO 2 . As expected, the novel CMC cathode delivers an exceptional capacity of 438.2 mAh g −1 (889.5 mAh g −1 based on the mass of MnO x ) at 0.2 A g −1 with a capacity retention up to 91.1% over 5000 cycles at 2 A g −1 . This work proposes an effective strategy to synthesize advanced Mn‐based cathode materials to harvest Mn 2+ through interface engineering for AZIBs.
- 1 June 2026
- Published by Wiley in Carbon Energy
- Vol. 8 (6)
Back Cover Image, Volume 8, Number 6, June 2026
- 1 June 2026
- Published by Wiley in Carbon Energy
- Vol. 8 (6)
Back Cover Image, Volume 8, Number 6, June 2026
- Top Cited PapersOpen Access
- 26 March 2026
- Published by Springer Nature in Nano-Micro Letters
- Vol. 18 (1)
Crystalline Ni3S2 Nanorods Tuned by Low-Crystalline NiCoSx with Built-In Electric Field for Efficient Overall Water Splitting
Efficient overall water splitting (OWS) technology has been highly demanded across the world, of which the key is the development of active and stable electrocatalysts for both hydrogen and oxygen evolution reactions (HER/OER). Herein, novel crystalline Ni 3 S 2 nanorods tuned by low-crystalline NiCoS x (NiCoS x @Ni 3 S 2 ) are synthesized via an ion-exchange strategy. The built-in electric field at the heterogeneous interface driven by work function difference, facilitates rapid electron transfer from Ni 3 S 2 to NiCoS x via a robust Ni–S–Co bond bridge. This synergistic combination of the conductive crystalline core and low-crystalline shell optimizes the d-band center, balancing intermediate adsorption/desorption, speeding up water dissociation, enhancing hydrogen adsorption/desorption for HER, and lowering the energy barrier for OER, ultimately boosting OWS efficiency. The defect-rich, low-crystalline NiCoS x shell, bonded to the crystalline core via Ni–S–Co bonds, serves as a protective armor, enabling dynamic reconstruction into NiCoOOH and suppresses sulfide leaching, ensuring catalytic stability. The optimized NiCoS x @Ni 3 S 2 achieves low HER/OER overpotentials of 346/520 mV@1000 mA cm −2 , evidenced by an ultralow cell voltage of 2.10 V@1000 mA cm −2 for OWS and long-term durability up to 400 h. The work paves a novel way to fabricate sulfur-based electrocatalysts with high yet balanced activity and stability for OWS via an interface engineering strategy.
- 26 March 2026
- Published by Springer Nature in Nano-Micro Letters
- Vol. 18 (1)
Top Cited PapersOpen AccessCrystalline Ni3S2 Nanorods Tuned by Low-Crystalline NiCoSx with Built-In Electric Field for Efficient Overall Water Splitting
Efficient overall water splitting (OWS) technology has been highly demanded across the world, of which the key is the development of active and stable electrocatalysts for both hydrogen and oxygen evolution reactions (HER/OER). Herein, novel crystalline Ni 3 S 2 nanorods tuned by low-crystalline NiCoS x (NiCoS x @Ni 3 S 2 ) are synthesized via an ion-exchange strategy. The built-in electric field at the heterogeneous interface driven by work function difference, facilitates rapid electron transfer from Ni 3 S 2 to NiCoS x via a robust Ni–S–Co bond bridge. This synergistic combination of the conductive crystalline core and low-crystalline shell optimizes the d-band center, balancing intermediate adsorption/desorption, speeding up water dissociation, enhancing hydrogen adsorption/desorption for HER, and lowering the energy barrier for OER, ultimately boosting OWS efficiency. The defect-rich, low-crystalline NiCoS x shell, bonded to the crystalline core via Ni–S–Co bonds, serves as a protective armor, enabling dynamic reconstruction into NiCoOOH and suppresses sulfide leaching, ensuring catalytic stability. The optimized NiCoS x @Ni 3 S 2 achieves low HER/OER overpotentials of 346/520 mV@1000 mA cm −2 , evidenced by an ultralow cell voltage of 2.10 V@1000 mA cm −2 for OWS and long-term durability up to 400 h. The work paves a novel way to fabricate sulfur-based electrocatalysts with high yet balanced activity and stability for OWS via an interface engineering strategy.
- Open Access
- 12 December 2025
- Published by Wiley in Carbon Energy
Carbon‐Supported Dual‐Nickel Atom Catalysts With Stabilized Ni─N 3 Active Sites for Efficient CO 2 Electroreduction
Unsaturated Ni─N 3 single‐atom catalysts (SACs) have been explored to overcome the conventional Ni─N 4 structural limitations for electrochemical CO 2 reduction reaction (eCO 2 RR). However, their inherently low structural stability has significantly hindered practical applications. Herein, we developed dual‐nickel atom catalysts (Ni‐DACs) to stabilize unsaturated Ni─N 3 atomic sites by constructing N 3 Ni─NiN 3 dual‐atom structures (Ni 2 ─N 6 sites) from coal. Theoretical prediction reveals that Ni 2 ─N 6 sites exhibit lower energy barriers for *COOH intermediate generation relative to Ni─N 4 sites and reduce the *CO desorption barriers compared to Ni 3 ─N 6 sites, thereby boosting reaction kinetics for CO generation. Aberration‐corrected scanning transmission electron microscopy and synchrotron X‐ray absorption fine structure spectroscopy validate the atomic dispersion of Ni dual‐atom sites. The prepared Ni‐DACs sample achieves the highest Faradaic efficiency for CO (FE CO ) generation of 98.6% at −0.8 V vs. reversible hydrogen electrode (RHE) and maintains a high FE CO over 94% from −0.8 to −1.2 V vs. RHE. It also shows a superior CO production turnover frequency as high as 7885 h −1 even at 1.19 V overpotential, outperforming Ni‐SACs (2615 h −1 ). This study offers a scalable approach for stabilizing unsaturated Ni─N 3 SACs to forge a path for their application in eCO 2 RR.
- 12 December 2025
- Published by Wiley in Carbon Energy
Open AccessCarbon‐Supported Dual‐Nickel Atom Catalysts With Stabilized Ni─N 3 Active Sites for Efficient CO 2 Electroreduction
Unsaturated Ni─N 3 single‐atom catalysts (SACs) have been explored to overcome the conventional Ni─N 4 structural limitations for electrochemical CO 2 reduction reaction (eCO 2 RR). However, their inherently low structural stability has significantly hindered practical applications. Herein, we developed dual‐nickel atom catalysts (Ni‐DACs) to stabilize unsaturated Ni─N 3 atomic sites by constructing N 3 Ni─NiN 3 dual‐atom structures (Ni 2 ─N 6 sites) from coal. Theoretical prediction reveals that Ni 2 ─N 6 sites exhibit lower energy barriers for *COOH intermediate generation relative to Ni─N 4 sites and reduce the *CO desorption barriers compared to Ni 3 ─N 6 sites, thereby boosting reaction kinetics for CO generation. Aberration‐corrected scanning transmission electron microscopy and synchrotron X‐ray absorption fine structure spectroscopy validate the atomic dispersion of Ni dual‐atom sites. The prepared Ni‐DACs sample achieves the highest Faradaic efficiency for CO (FE CO ) generation of 98.6% at −0.8 V vs. reversible hydrogen electrode (RHE) and maintains a high FE CO over 94% from −0.8 to −1.2 V vs. RHE. It also shows a superior CO production turnover frequency as high as 7885 h −1 even at 1.19 V overpotential, outperforming Ni‐SACs (2615 h −1 ). This study offers a scalable approach for stabilizing unsaturated Ni─N 3 SACs to forge a path for their application in eCO 2 RR.
- Open Access
- 8 September 2025
- Published by Wiley in Energy & Environmental Materials
- Vol. 9 (1)
Hard/Soft Carbon with Tuned Porosity and Defect Via Coating ZIF ‐8 by Coal Tar Pitch for High‐Performance Supercapacitor
Metal–organic framework (MOF)‐derived porous carbon has attracted particular attention in the electrochemical energy storage field, of which the key is the design and preparation of electrode materials with adjustable porosity and defects for supercapacitors. Here, a novel strategy of coating ZIF‐8 with coal tar pitch (CTP) is presented to tailor the porosity and defects of derived porous carbon, by which the inward contraction of ZIF‐8 is prevented to enlarge the ultra‐micropores, and the defects of ZIF‐8‐derived carbon are repaired to form a continuous conjugated network. The tradeoff between porosity and electrical conductivity endows this novel hard/soft carbon electrode with fast ion/electron diffusion, achieving high yet balanced capacitance and rate performance of a top‐level specific area‐normalized capacitance (40 μF cm −2 ) and a capacitance retention of 52.1% at a 1000‐fold increased current density. Meanwhile, the novel electrode realizes a high capacitance of 704 F g −1 at 1 A g −1 and capacitance retention of 91.9% after 50 000 cycles in KOH + PPD electrolyte. This study provides an effective approach to designing novel hard/soft carbon with tuned porosity and carbon defects from MOFs and CTP for supercapacitors and other metal‐ion batteries.
- 8 September 2025
- Published by Wiley in Energy & Environmental Materials
- Vol. 9 (1)
Open AccessHard/Soft Carbon with Tuned Porosity and Defect Via Coating ZIF ‐8 by Coal Tar Pitch for High‐Performance Supercapacitor
Metal–organic framework (MOF)‐derived porous carbon has attracted particular attention in the electrochemical energy storage field, of which the key is the design and preparation of electrode materials with adjustable porosity and defects for supercapacitors. Here, a novel strategy of coating ZIF‐8 with coal tar pitch (CTP) is presented to tailor the porosity and defects of derived porous carbon, by which the inward contraction of ZIF‐8 is prevented to enlarge the ultra‐micropores, and the defects of ZIF‐8‐derived carbon are repaired to form a continuous conjugated network. The tradeoff between porosity and electrical conductivity endows this novel hard/soft carbon electrode with fast ion/electron diffusion, achieving high yet balanced capacitance and rate performance of a top‐level specific area‐normalized capacitance (40 μF cm −2 ) and a capacitance retention of 52.1% at a 1000‐fold increased current density. Meanwhile, the novel electrode realizes a high capacitance of 704 F g −1 at 1 A g −1 and capacitance retention of 91.9% after 50 000 cycles in KOH + PPD electrolyte. This study provides an effective approach to designing novel hard/soft carbon with tuned porosity and carbon defects from MOFs and CTP for supercapacitors and other metal‐ion batteries.
- Open Access
- 21 July 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (14) , 8095
A Hierarchically Structured Ni-NOF@ZIF-L Heterojunction Using Van Der Waals Interactions for Electrocatalytic Reduction of CO2 to HCOOH
The electrocatalytic CO2 reduction reaction (CO2RR) offers an energy-saving and environmentally friendly approach to producing hydrocarbon fuels. The use of a gas diffusion electrode (GDE) flow cell has generally improved the rate of CO2RR, while the gas diffusion layer (GDL) remains a significant challenge. In this study, we successfully engineered a novel metal–organic framework (MOF) heterojunction through the controlled coating of zeolitic imidazolate framework (ZIF-L) on ultrathin nickel—metal–organic framework (Ni-MOF) nanosheets. This innovative architecture simultaneously integrates GDL functionality and exposes abundant solid–liquid–gas triple-phase boundaries. The resulting Ni-MOF@ZIF-L heterostructure demonstrates exceptional performance, achieving a formate Faradaic efficiency of 92.4% while suppressing the hydrogen evolution reaction (HER) to 6.7%. Through computational modeling of the optimized heterojunction configuration, we further elucidated its competitive adsorption behavior and electronic modulation effects. The experimental and theoretical results demonstrate an improvement in electrochemical CO2 reduction activity with suppressed hydrogen evolution for the heterojunction because of its hydrophobic interface, good electron transfer capability, and high CO2 adsorption at the catalyst interface. This work provides a new insight into the rational design of porous crystalline materials in electrocatalytic CO2RR.
- 21 July 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (14) , 8095
Open AccessA Hierarchically Structured Ni-NOF@ZIF-L Heterojunction Using Van Der Waals Interactions for Electrocatalytic Reduction of CO2 to HCOOH
The electrocatalytic CO2 reduction reaction (CO2RR) offers an energy-saving and environmentally friendly approach to producing hydrocarbon fuels. The use of a gas diffusion electrode (GDE) flow cell has generally improved the rate of CO2RR, while the gas diffusion layer (GDL) remains a significant challenge. In this study, we successfully engineered a novel metal–organic framework (MOF) heterojunction through the controlled coating of zeolitic imidazolate framework (ZIF-L) on ultrathin nickel—metal–organic framework (Ni-MOF) nanosheets. This innovative architecture simultaneously integrates GDL functionality and exposes abundant solid–liquid–gas triple-phase boundaries. The resulting Ni-MOF@ZIF-L heterostructure demonstrates exceptional performance, achieving a formate Faradaic efficiency of 92.4% while suppressing the hydrogen evolution reaction (HER) to 6.7%. Through computational modeling of the optimized heterojunction configuration, we further elucidated its competitive adsorption behavior and electronic modulation effects. The experimental and theoretical results demonstrate an improvement in electrochemical CO2 reduction activity with suppressed hydrogen evolution for the heterojunction because of its hydrophobic interface, good electron transfer capability, and high CO2 adsorption at the catalyst interface. This work provides a new insight into the rational design of porous crystalline materials in electrocatalytic CO2RR.
- 11 June 2025
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 18 (14) , 7213-7222
Nano-carbon supported B/N-coordinated Fe single atoms with a tuned electronic structure for long lifespan zinc–iodine batteries
Asymmetric B,N coordinated Fe–B 2 N 2 single atoms on carbon nanotube forests enhance the polyiodide electrocatalytic ability, realizing high-stability Zn–I 2 batteries.
- 11 June 2025
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 18 (14) , 7213-7222
Nano-carbon supported B/N-coordinated Fe single atoms with a tuned electronic structure for long lifespan zinc–iodine batteries
Asymmetric B,N coordinated Fe–B 2 N 2 single atoms on carbon nanotube forests enhance the polyiodide electrocatalytic ability, realizing high-stability Zn–I 2 batteries.
- Open Access
- 6 June 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (12) , 5240
Eco-Friendly Gallic Acid-Tailored Binder with Synergistic Polarity Sites for High-Loading Lithium–Sulfur Batteries
The development of polymer binders with tailored functionalities and green manufacturing processes is highly needed for high-performance lithium–sulfur batteries. In this study, a readily hydrolyzable 3,9-divinyl-2,4,8,10-tetraoxaspiro-[5.5]-undecane is utilized to prepare a water-based binder. Specifically, the acrolein produced by hydrolysis undergoes in situ polymerization to form a linear polymer, while the other hydrolyzed product, pentaerythritol, physically crosslinks these polymer chains via hydrogen bonding, generating a network polymer (BTU). Additionally, gallic acid (GA), a substance derived from waste wood, is further introduced into BTU during slurry preparation, forming a biphenol-containing binder (BG) with a multi-hydrogen-bonded structure. This resilience and robust cathode framework effectively accommodate volumetric changes during cycling while maintaining efficient ion and electron transport pathways. Furthermore, the abundant polar groups in BG enable strong polysulfide adsorption. As a result, sulfur cathode with a high mass loading of 5.3 mg cm−2 employing the BG (7:3) binder still retains an areal capacity of 4.7 mA h cm−2 after 50 cycles at 0.1 C. This work presents a sustainable strategy for battery manufacturing by integrating renewable biomass-derived materials and eco-friendly aqueous processing to develop polymer binders, offering a green pathway to high-performance lithium–sulfur batteries.
- 6 June 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (12) , 5240
Open AccessEco-Friendly Gallic Acid-Tailored Binder with Synergistic Polarity Sites for High-Loading Lithium–Sulfur Batteries
The development of polymer binders with tailored functionalities and green manufacturing processes is highly needed for high-performance lithium–sulfur batteries. In this study, a readily hydrolyzable 3,9-divinyl-2,4,8,10-tetraoxaspiro-[5.5]-undecane is utilized to prepare a water-based binder. Specifically, the acrolein produced by hydrolysis undergoes in situ polymerization to form a linear polymer, while the other hydrolyzed product, pentaerythritol, physically crosslinks these polymer chains via hydrogen bonding, generating a network polymer (BTU). Additionally, gallic acid (GA), a substance derived from waste wood, is further introduced into BTU during slurry preparation, forming a biphenol-containing binder (BG) with a multi-hydrogen-bonded structure. This resilience and robust cathode framework effectively accommodate volumetric changes during cycling while maintaining efficient ion and electron transport pathways. Furthermore, the abundant polar groups in BG enable strong polysulfide adsorption. As a result, sulfur cathode with a high mass loading of 5.3 mg cm−2 employing the BG (7:3) binder still retains an areal capacity of 4.7 mA h cm−2 after 50 cycles at 0.1 C. This work presents a sustainable strategy for battery manufacturing by integrating renewable biomass-derived materials and eco-friendly aqueous processing to develop polymer binders, offering a green pathway to high-performance lithium–sulfur batteries.
- 17 March 2025
- Published by Wiley in Rare Metals
- Vol. 44 (7) , 4740-4755
Size effect of carbon nanotubes confined CoP–Ni 2 P heterostructure via phosphorylation‐induction strategy for efficient overall water splitting
The size tuning of one‐dimensional (1D) spatially confined electrocatalysts with abundant exposed active sites is still a huge challenge for electrocatalytic hydrogen/oxygen evolution reactions (HER/OER) and overall water splitting (OWS). Herein, we construct CoP–Ni 2 P heterostructure embedded ultrafine N‐doped carbon nanotubes (CoP–Ni 2 P@U‐NCNTs/NF) with a diameter size of about 50 nm from 2D cobalt‐based zeolitic imidazolate framework (Co‐ZIF‐L/NF) via phosphorylation strategy, while Co–Ni embedded N‐doped carbon nanotubes with a diameter of about 200 nm are constructed via carbonization. The size‐tuned CoP‐Ni 2 P@U‐NCNTs/NF possesses abundant active sites and electron transport pathways, and the stability of CoP–Ni 2 P heterostructure is improved by carbon coating. Density functional theory (DFT) calculation results verify that the Ni 2 P and CoP heterojunction synergistically promotes the electron redistribution of the Co–Ni to optimize Gibbs free energy of H* (Δ G H* ). Meanwhile, the NCNTs‐confined CoP–Ni 2 P induced by phosphating accelerates the reconstruction of the CoOOH‐NiOOH compared with Ni‐Co, thereby boosting the reaction kinetics of efficient OWS due to the reduced reaction energy barrier of O–O coupling. As expected, the CoP–Ni 2 P@U‐NCNTs/NF favors a low overpotential of 67/203 mV@10 mA cm −2 for the HER/OER, realizing an ultralow cell voltage of 1.52 V@10 mA cm −2 for OWS and long‐term durability at various current densities. This work provides a feasible approach to tuning the composition and structure of high‐efficiency electrocatalysts for the production of green hydrogen.
- 17 March 2025
- Published by Wiley in Rare Metals
- Vol. 44 (7) , 4740-4755
Size effect of carbon nanotubes confined CoP–Ni 2 P heterostructure via phosphorylation‐induction strategy for efficient overall water splitting
The size tuning of one‐dimensional (1D) spatially confined electrocatalysts with abundant exposed active sites is still a huge challenge for electrocatalytic hydrogen/oxygen evolution reactions (HER/OER) and overall water splitting (OWS). Herein, we construct CoP–Ni 2 P heterostructure embedded ultrafine N‐doped carbon nanotubes (CoP–Ni 2 P@U‐NCNTs/NF) with a diameter size of about 50 nm from 2D cobalt‐based zeolitic imidazolate framework (Co‐ZIF‐L/NF) via phosphorylation strategy, while Co–Ni embedded N‐doped carbon nanotubes with a diameter of about 200 nm are constructed via carbonization. The size‐tuned CoP‐Ni 2 P@U‐NCNTs/NF possesses abundant active sites and electron transport pathways, and the stability of CoP–Ni 2 P heterostructure is improved by carbon coating. Density functional theory (DFT) calculation results verify that the Ni 2 P and CoP heterojunction synergistically promotes the electron redistribution of the Co–Ni to optimize Gibbs free energy of H* (Δ G H* ). Meanwhile, the NCNTs‐confined CoP–Ni 2 P induced by phosphating accelerates the reconstruction of the CoOOH‐NiOOH compared with Ni‐Co, thereby boosting the reaction kinetics of efficient OWS due to the reduced reaction energy barrier of O–O coupling. As expected, the CoP–Ni 2 P@U‐NCNTs/NF favors a low overpotential of 67/203 mV@10 mA cm −2 for the HER/OER, realizing an ultralow cell voltage of 1.52 V@10 mA cm −2 for OWS and long‐term durability at various current densities. This work provides a feasible approach to tuning the composition and structure of high‐efficiency electrocatalysts for the production of green hydrogen.