Taraka Ravi Shankar Mullapudi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Interests
Taraka Ravi Shankar Mullapudi has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Ashraf Ayoub
Department of Civil and Environmental Engineering, University of Houston, 4800 Calhoun, Houston, TX, 77004
14 shared publications Ashraf Ayoub
Civil Engineering, City University London, Northampton Square, London EC1V OHB, UK
4 shared publications- Bora Gencturk
Univ. of Southern California
1 shared publication Il-Hwan Moon
Senior Staff Engineer, MMI Engineering Inc., 11490 Westheimer Rd, #150, Houston, Texas, 77077
1 shared publicationMoheb Labib
KBR Oil and Gas, Houston, USA
1 shared publication- Mustafa Erdik
Boğaziçi University
1 shared publication
Latest Publications
- 1 April 2014
- Published by American Society of Civil Engineers (ASCE) in Journal of Performance of Constructed Facilities
- Vol. 28 (2) , 349-362
Capacity Assessment of the Titus Tunnel Bridge Using Analytical and Numerical Techniques
- 1 April 2014
- Published by American Society of Civil Engineers (ASCE) in Journal of Performance of Constructed Facilities
- Vol. 28 (2) , 349-362
Capacity Assessment of the Titus Tunnel Bridge Using Analytical and Numerical Techniques
- 13 February 2013
- Published by Japan Concrete Institute in Journal of Advanced Concrete Technology
- Vol. 11 (2) , 22-34
Analysis of RC Structures Subjected to Multi-Directional Shear Loads
- 13 February 2013
- Published by Japan Concrete Institute in Journal of Advanced Concrete Technology
- Vol. 11 (2) , 22-34
Analysis of RC Structures Subjected to Multi-Directional Shear Loads
- 1 February 2013
- Published by Emerald Publishing in Magazine of Concrete Research
- Vol. 65 (3) , 172-184
Non-linear analysis of reinforced concrete walls under three-dimensional loading
Analytical studies are conducted to develop an effective analytical model to simulate the non-linear response of reinforced concrete (RC) walls subjected to three-dimensional (3D) loads. The interaction between the concrete and steel is taken into account with consideration of the smeared behaviour of steel and tension stiffening of concrete. The proposed model is formulated to address the interaction between the axial force, shear, bending and torsion loads. The shear mechanism along the beam is modelled by adopting a Timoshenko beam approach for 3D frame elements with arbitrary cross-section geometry. The non-linear behaviour of the composite element is derived entirely from the constitutive laws of concrete and steel. The concrete constitutive model follows the softened membrane model that predicts the tensile cracking, compression crushing, strain softening, steel yielding and material damage under combined loadings. The validity of the model is established through a correlation study of experimentally tested RC shear walls subjected to monotonic loading conditions.
- 1 February 2013
- Published by Emerald Publishing in Magazine of Concrete Research
- Vol. 65 (3) , 172-184
Non-linear analysis of reinforced concrete walls under three-dimensional loading
Analytical studies are conducted to develop an effective analytical model to simulate the non-linear response of reinforced concrete (RC) walls subjected to three-dimensional (3D) loads. The interaction between the concrete and steel is taken into account with consideration of the smeared behaviour of steel and tension stiffening of concrete. The proposed model is formulated to address the interaction between the axial force, shear, bending and torsion loads. The shear mechanism along the beam is modelled by adopting a Timoshenko beam approach for 3D frame elements with arbitrary cross-section geometry. The non-linear behaviour of the composite element is derived entirely from the constitutive laws of concrete and steel. The concrete constitutive model follows the softened membrane model that predicts the tensile cracking, compression crushing, strain softening, steel yielding and material damage under combined loadings. The validity of the model is established through a correlation study of experimentally tested RC shear walls subjected to monotonic loading conditions.
- 29 March 2012
- Published by American Society of Civil Engineers (ASCE)
- p. 1881-1893
Impact Analysis of Steel Plated Concrete Wall
Impact analysis of nuclear plant structural walls composed of surface steel plates, tie-bars, shear studs and concrete are discussed utilizing a simplified model of a fictitious wall to perform the analysis using LS-DYNA. The concrete constitutive model is based on Winfrith concrete model which covers all aspects of concrete behavior including cracking. The model was used to conduct a series of numerical studies to evaluate the effect of several parameters affecting the behavior of the wall. These parameters include thickness of the wall, thickness of the steel plate and diameter of tie bars. These studies resulted in several conclusions regarding the global and local behavior of the steel plated concrete wall system.
- 29 March 2012
- Published by American Society of Civil Engineers (ASCE)
- p. 1881-1893
Impact Analysis of Steel Plated Concrete Wall
Impact analysis of nuclear plant structural walls composed of surface steel plates, tie-bars, shear studs and concrete are discussed utilizing a simplified model of a fictitious wall to perform the analysis using LS-DYNA. The concrete constitutive model is based on Winfrith concrete model which covers all aspects of concrete behavior including cracking. The model was used to conduct a series of numerical studies to evaluate the effect of several parameters affecting the behavior of the wall. These parameters include thickness of the wall, thickness of the steel plate and diameter of tie bars. These studies resulted in several conclusions regarding the global and local behavior of the steel plated concrete wall system.
- 13 April 2011
- Published by American Society of Civil Engineers (ASCE)
- p. 2963-2970
UPV Method for Detecting Properties of Carbon-Nanofiber Concrete
Concrete is the most widely used construction material, and the addition of carbon-nanofibers (CNF) to concrete has many advantages in both mechanical and electrical properties such as higher strength, a higher Young's modulus, improved fatigue resistance in addition to self-monitoring behavior due to the high tensile strength and high conductivity. In this study, the Ultrasonic Pulse Velocity (UPV) method was used to characterize properties of concrete containing carbon-nanofibers. Concrete strength correlations between pulse velocity, electrical resistance variation and destructive tests were analyzed. The experimental results indicate that the compressive strength, pulse velocity and percent reduction in electrical resistance while loading concrete containing CNF are much greater than those of plain concrete.
- 13 April 2011
- Published by American Society of Civil Engineers (ASCE)
- p. 2963-2970
UPV Method for Detecting Properties of Carbon-Nanofiber Concrete
Concrete is the most widely used construction material, and the addition of carbon-nanofibers (CNF) to concrete has many advantages in both mechanical and electrical properties such as higher strength, a higher Young's modulus, improved fatigue resistance in addition to self-monitoring behavior due to the high tensile strength and high conductivity. In this study, the Ultrasonic Pulse Velocity (UPV) method was used to characterize properties of concrete containing carbon-nanofibers. Concrete strength correlations between pulse velocity, electrical resistance variation and destructive tests were analyzed. The experimental results indicate that the compressive strength, pulse velocity and percent reduction in electrical resistance while loading concrete containing CNF are much greater than those of plain concrete.
- 13 April 2011
- Published by American Society of Civil Engineers (ASCE)
- p. 252-264
Seismic Analysis of Bridge Columns under Axial, Flexure, Shear, and Torsional Loadings
This study presents an inelastic non-linear three dimensional (3-D) beam element with axial, bending, shear force and torsion interaction for seismic analysis of Reinforced Concrete (RC) bridge columns. As a result of these load combinations the structural performances of RC bridge columns defer in strength, deformation capacity and failure modes. The shear mechanism along the beam is modeled by using Timoshenko beam approach with curved 3-D frame elements. The values of the concrete strength in principal directions 1, 2 and 3 are affected by the strain state in the other directions. The problem consists in solving a system of equations by combining the equilibrium conditions, compatibility conditions and constitutive laws of materials at section and structural level. The model is validated with the experimental tests subjected to real time earthquake motions.
- 13 April 2011
- Published by American Society of Civil Engineers (ASCE)
- p. 252-264
Seismic Analysis of Bridge Columns under Axial, Flexure, Shear, and Torsional Loadings
This study presents an inelastic non-linear three dimensional (3-D) beam element with axial, bending, shear force and torsion interaction for seismic analysis of Reinforced Concrete (RC) bridge columns. As a result of these load combinations the structural performances of RC bridge columns defer in strength, deformation capacity and failure modes. The shear mechanism along the beam is modeled by using Timoshenko beam approach with curved 3-D frame elements. The values of the concrete strength in principal directions 1, 2 and 3 are affected by the strain state in the other directions. The problem consists in solving a system of equations by combining the equilibrium conditions, compatibility conditions and constitutive laws of materials at section and structural level. The model is validated with the experimental tests subjected to real time earthquake motions.
- 13 April 2011
- Published by American Society of Civil Engineers (ASCE)
- p. 1169-1178
Analysis of RC Structures with Carbon-Nanofiber Concrete
Concrete has been used as the major construction material for many years in the field of civil engineering because of its high compressive strength and constructability. In order to restrict the growth of micro cracks, Carbon-Nanofibers (CNF's) were added to the concrete mix. The concentration of CNF in concrete mix also yields higher strength and ductility. Uniaxial compression tests on CNF concrete were conducted to find the best CNF concentration. To evaluate the performance of CNF concrete, experiments were conducted at the University of Houston (UH) and an inelastic non-linear fiber beam element with bending, shear and axial force interaction for the analysis of reinforced concrete structures was developed and evaluated to correlate with the experimental results.
- 13 April 2011
- Published by American Society of Civil Engineers (ASCE)
- p. 1169-1178
Analysis of RC Structures with Carbon-Nanofiber Concrete
Concrete has been used as the major construction material for many years in the field of civil engineering because of its high compressive strength and constructability. In order to restrict the growth of micro cracks, Carbon-Nanofibers (CNF's) were added to the concrete mix. The concentration of CNF in concrete mix also yields higher strength and ductility. Uniaxial compression tests on CNF concrete were conducted to find the best CNF concentration. To evaluate the performance of CNF concrete, experiments were conducted at the University of Houston (UH) and an inelastic non-linear fiber beam element with bending, shear and axial force interaction for the analysis of reinforced concrete structures was developed and evaluated to correlate with the experimental results.
- 1 November 2010
- Published by Elsevier in Engineering Structures
- Vol. 32 (11) , 3601-3615
Modeling of the seismic behavior of shear-critical reinforced concrete columns
- 1 November 2010
- Published by Elsevier in Engineering Structures
- Vol. 32 (11) , 3601-3615
Modeling of the seismic behavior of shear-critical reinforced concrete columns
- 18 May 2010
- Published by American Society of Civil Engineers (ASCE)
- p. 83-93
Seismic Analysis of Beams on Two-Parameter Foundations
Seismic behavior of an inelastic beam resting on a nonlinear soil bed is analyzed with the development of fiber beam element. The Winkler approach models the soil as a single layer, and assumes that the foundation reaction at a particular point is proportional to the soil displacement. In this paper a new finite element formulation was developed to simulate the seismic performance in which the soil can be viewed as a semi-infinite inelastic element that can resist bending, in addition to the well-known Winkler effect. The non linear response of structures resting on this improved foundation model is analyzed following a Vlasov approach with soil parameters based on a plane strain assumption. The tensionless character of the foundation results in the creation of lift-offs between the beam and foundation is also being considered. Effect of the earthquake intensity on drift demands is investigated. Parametric analysis of the reinforced concrete and steel foundation elements are carried out and comparisons were made with the simple Winkler model. The presented solutions and applications show the superiority of the element in simulating the seismic response of foundation structures.
- 18 May 2010
- Published by American Society of Civil Engineers (ASCE)
- p. 83-93
Seismic Analysis of Beams on Two-Parameter Foundations
Seismic behavior of an inelastic beam resting on a nonlinear soil bed is analyzed with the development of fiber beam element. The Winkler approach models the soil as a single layer, and assumes that the foundation reaction at a particular point is proportional to the soil displacement. In this paper a new finite element formulation was developed to simulate the seismic performance in which the soil can be viewed as a semi-infinite inelastic element that can resist bending, in addition to the well-known Winkler effect. The non linear response of structures resting on this improved foundation model is analyzed following a Vlasov approach with soil parameters based on a plane strain assumption. The tensionless character of the foundation results in the creation of lift-offs between the beam and foundation is also being considered. Effect of the earthquake intensity on drift demands is investigated. Parametric analysis of the reinforced concrete and steel foundation elements are carried out and comparisons were made with the simple Winkler model. The presented solutions and applications show the superiority of the element in simulating the seismic response of foundation structures.
- 18 May 2010
- Published by American Society of Civil Engineers (ASCE)
- p. 504-515
Development of Analysis Tools for RC Members Subjected to Three-Dimensional Combined Loads
This paper presents a new finite element-based model for analysis of reinforce concrete (RC) frames subjected to combined loading conditions. The proposed model is formulated to address the interaction between the axial force, biaxial shear, biaxial bending, and torsion. The shear mechanism along the beam is modeled by using the Timoshenko beam approach with curved three dimensional (3-D) frame elements with arbitrary cross-section geometry. The problem consists of solving a system of equations by combining the equilibrium conditions, compatibility conditions and constitutive laws of materials at the section and structural level. The concrete constitutive model follows the Softened Membrane Model (SMM) with a tangent-stiffness formulation. The validity of the model is established by correlation of analytical results with experimental tests of RC specimens. The result shows that the flexural capacity and ductility of the RC members decreased significantly under the effect of combined bending and torsion.
- 18 May 2010
- Published by American Society of Civil Engineers (ASCE)
- p. 504-515
Development of Analysis Tools for RC Members Subjected to Three-Dimensional Combined Loads
This paper presents a new finite element-based model for analysis of reinforce concrete (RC) frames subjected to combined loading conditions. The proposed model is formulated to address the interaction between the axial force, biaxial shear, biaxial bending, and torsion. The shear mechanism along the beam is modeled by using the Timoshenko beam approach with curved three dimensional (3-D) frame elements with arbitrary cross-section geometry. The problem consists of solving a system of equations by combining the equilibrium conditions, compatibility conditions and constitutive laws of materials at the section and structural level. The concrete constitutive model follows the Softened Membrane Model (SMM) with a tangent-stiffness formulation. The validity of the model is established by correlation of analytical results with experimental tests of RC specimens. The result shows that the flexural capacity and ductility of the RC members decreased significantly under the effect of combined bending and torsion.