Terry Lynn Alford
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Terry Lynn Alford has a total of 128 co-authors. Here are the top co-authors by number of shared publications:
Yuanqing Chen
School for Matter, Transport and Energy
9 shared publications- Aditya S. Yerramilli
Arizona State Univ, Sch Engn Matter Transport & Energy, Tempe, AZ 85287 USA
8 shared publications Lingwei Li
Department of Materials Physics and Chemistry, Xi’an University of Technology, Xi’an, China
6 shared publications- Aritra Dhar
Arizona State University
5 shared publications - Sayantan Das
IMEC, Leuven, Belgium
5 shared publications J.W. Mayer
4 shared publications
Latest Publications
- Open Access
Characterization of PEDOT:PSS Nanofilms Printed via Electrically Assisted Direct Ink Deposition with Ultrasonic Vibrations
Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) has emerged as a promising conductive polymer for constructing efficient hole-transport layers (HTLs) in perovskite solar cells (PSCs). However, conventional fabrication methods, such as spin coating, spray coating, and slot-die coating, have resulted in PEDOT:PSS nanofilms with limited performance, characterized by a low density and non-uniform nanostructures. We introduce a novel 3D-printing approach called electrically assisted direct ink deposition with ultrasonic vibrations (EF-DID-UV) to overcome these challenges. This innovative printing method combines programmable acoustic field modulation with electrohydrodynamic spraying, providing a powerful tool for controlling the PEDOT:PSS nanofilm’s morphology precisely. The experimental findings indicate that when PEDOT:PSS nanofilms are crafted using horizontal ultrasonic vibrations, they demonstrate a uniform dispersion of PEDOT:PSS nanoparticles, setting them apart from instances involving vertical ultrasonic vibrations, both prior to and after the printing process. In particular, when horizontal ultrasonic vibrations are applied at a low amplitude (0.15 A) during printing, these nanofilms showcase exceptional wettability performance, with a contact angle of 16.24°, and impressive electrical conductivity of 2092 Ω/square. Given its ability to yield high-performance PEDOT:PSS nanofilms with precisely controlled nanostructures, this approach holds great promise for a wide range of nanotechnological applications, including the production of solar cells, wearable sensors, and actuators.
Open AccessCharacterization of PEDOT:PSS Nanofilms Printed via Electrically Assisted Direct Ink Deposition with Ultrasonic Vibrations
Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) has emerged as a promising conductive polymer for constructing efficient hole-transport layers (HTLs) in perovskite solar cells (PSCs). However, conventional fabrication methods, such as spin coating, spray coating, and slot-die coating, have resulted in PEDOT:PSS nanofilms with limited performance, characterized by a low density and non-uniform nanostructures. We introduce a novel 3D-printing approach called electrically assisted direct ink deposition with ultrasonic vibrations (EF-DID-UV) to overcome these challenges. This innovative printing method combines programmable acoustic field modulation with electrohydrodynamic spraying, providing a powerful tool for controlling the PEDOT:PSS nanofilm’s morphology precisely. The experimental findings indicate that when PEDOT:PSS nanofilms are crafted using horizontal ultrasonic vibrations, they demonstrate a uniform dispersion of PEDOT:PSS nanoparticles, setting them apart from instances involving vertical ultrasonic vibrations, both prior to and after the printing process. In particular, when horizontal ultrasonic vibrations are applied at a low amplitude (0.15 A) during printing, these nanofilms showcase exceptional wettability performance, with a contact angle of 16.24°, and impressive electrical conductivity of 2092 Ω/square. Given its ability to yield high-performance PEDOT:PSS nanofilms with precisely controlled nanostructures, this approach holds great promise for a wide range of nanotechnological applications, including the production of solar cells, wearable sensors, and actuators.
- Open Access
Ultrafast and Large-Scale Fabrication of PEDOT:PSS Nanofilms Using Electrical-Field-Assisted Direct Ink Deposition
The importance of conductive polymers has significantly increased over the decade due to their various applications, such as in electronic devices, sensors, and photovoltaics. Poly(3,4-ethylene dioxythiophene) polystyrene sulfonate (PEDOT:PSS) is one of the most successfully and widely used polymers in practical applications. Spin coating is extensively used to fabricate these conductive films; however, it has disadvantages. It is inherently a batch process with relatively low output and high solution wastage. To address these issues, we developed a novel printing process called electrical-field-assisted direct ink deposition (EF-DID), which yields a continuous, homogenous film with high electrical conductivity. In this process, we studied the formation of nanodroplets under an electrical field and their effects on film characteristics. Furthermore, dimethyl sulfoxide (DMSO) was considered as an additive solvent to increase the conductivity and wettability of the films. We then compared EF-DID-printed PEDOT:PSS films with spin-coated films to better understand the film properties. Finally, inverted perovskite solar cell devices were fabricated and compared, where the PEDOT:PSS layers were prepared by EF-DID printing and spin coating. Based on the experimental results, a solution of 20% PEDOT:PSS in DMSO (vol/vol) printed by EF-DID for 15 s provided optimal morphology.
Open AccessUltrafast and Large-Scale Fabrication of PEDOT:PSS Nanofilms Using Electrical-Field-Assisted Direct Ink Deposition
The importance of conductive polymers has significantly increased over the decade due to their various applications, such as in electronic devices, sensors, and photovoltaics. Poly(3,4-ethylene dioxythiophene) polystyrene sulfonate (PEDOT:PSS) is one of the most successfully and widely used polymers in practical applications. Spin coating is extensively used to fabricate these conductive films; however, it has disadvantages. It is inherently a batch process with relatively low output and high solution wastage. To address these issues, we developed a novel printing process called electrical-field-assisted direct ink deposition (EF-DID), which yields a continuous, homogenous film with high electrical conductivity. In this process, we studied the formation of nanodroplets under an electrical field and their effects on film characteristics. Furthermore, dimethyl sulfoxide (DMSO) was considered as an additive solvent to increase the conductivity and wettability of the films. We then compared EF-DID-printed PEDOT:PSS films with spin-coated films to better understand the film properties. Finally, inverted perovskite solar cell devices were fabricated and compared, where the PEDOT:PSS layers were prepared by EF-DID printing and spin coating. Based on the experimental results, a solution of 20% PEDOT:PSS in DMSO (vol/vol) printed by EF-DID for 15 s provided optimal morphology.
- 8 March 2023
- Published by Elsevier in Diamond and Related Materials
- Vol. 135
Ohmic contacts to nitrogen-doped nanocarbon layers on diamond (100) surfaces
- 8 March 2023
- Published by Elsevier in Diamond and Related Materials
- Vol. 135
Ohmic contacts to nitrogen-doped nanocarbon layers on diamond (100) surfaces
- 10 December 2022
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 48 (22) , 7993-8001
Theoretical analysis of green hydrogen from hydropower: A case study of the Northwest Columbia River system
- 10 December 2022
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 48 (22) , 7993-8001
Theoretical analysis of green hydrogen from hydropower: A case study of the Northwest Columbia River system
- 27 August 2022
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 33 (26) , 21161-21171
Fabrication of triple cation perovskite solar cells using different post-spin coating anti-solvent treatments
- 27 August 2022
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 33 (26) , 21161-21171
Fabrication of triple cation perovskite solar cells using different post-spin coating anti-solvent treatments
- 27 January 2022
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 33 (7) , 4415-4425
Understanding the crystallization of triple-cation perovskites assisted by mixed antisolvents for improved solar cell device performance
- 27 January 2022
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 33 (7) , 4415-4425
Understanding the crystallization of triple-cation perovskites assisted by mixed antisolvents for improved solar cell device performance
- 6 April 2021
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 5 (9) , 2486-2493
Passivation of triple cation perovskites using guanidinium iodide in inverted solar cells for improved open-circuit voltage and stability
Inverted device architectures in perovskite research were promising for faster commercialization given the simple processing routes and choice of hole transport materials such as PEDOT:PSS. However, the crystallization of perovskite on the PEDOT:PSS surface led to large domains with several grain boundaries and defects, especially when multi cation systems are involved. Defects formed on the surface of the perovskite are significant reasons for non-radiative recombination, which then limits the performance of the device. Surface passivation of the perovskites through the introduction of large cations was shown as a viable option to minimize the defects and promote better charge carrier extraction. In this regard, recent research was mostly limited to planar architectures and on perovskites prepared on mesoporous TiO2 films. In this work, we report the deposition of guanidinium iodide (GUAI) on the triple cation FAMAC perovskite prepared on a PEDOT:PSS surface in an inverted architecture as a means to induce passivation and suppress non-radiative recombination. We examine the effects of adding different concentrations of GUAI dissolved in isopropyl alcohol as a post-treatment process on triple cation perovskites. The passivation effect led to an increase in open-circuit voltages from 0.89 V to over 0.96 V, which resulted in high efficiency of 16.03% for a GUAI loaded device compared to 12.92% for the control device. The stability was also found to be improved for GUAI passivated devices compared to a control device when tested over 600 hours of storage in ambient conditions.
- 6 April 2021
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 5 (9) , 2486-2493
Passivation of triple cation perovskites using guanidinium iodide in inverted solar cells for improved open-circuit voltage and stability
Inverted device architectures in perovskite research were promising for faster commercialization given the simple processing routes and choice of hole transport materials such as PEDOT:PSS. However, the crystallization of perovskite on the PEDOT:PSS surface led to large domains with several grain boundaries and defects, especially when multi cation systems are involved. Defects formed on the surface of the perovskite are significant reasons for non-radiative recombination, which then limits the performance of the device. Surface passivation of the perovskites through the introduction of large cations was shown as a viable option to minimize the defects and promote better charge carrier extraction. In this regard, recent research was mostly limited to planar architectures and on perovskites prepared on mesoporous TiO2 films. In this work, we report the deposition of guanidinium iodide (GUAI) on the triple cation FAMAC perovskite prepared on a PEDOT:PSS surface in an inverted architecture as a means to induce passivation and suppress non-radiative recombination. We examine the effects of adding different concentrations of GUAI dissolved in isopropyl alcohol as a post-treatment process on triple cation perovskites. The passivation effect led to an increase in open-circuit voltages from 0.89 V to over 0.96 V, which resulted in high efficiency of 16.03% for a GUAI loaded device compared to 12.92% for the control device. The stability was also found to be improved for GUAI passivated devices compared to a control device when tested over 600 hours of storage in ambient conditions.
- 22 October 2020
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 32 (10) , 12929-12938
Improved photostability of inverted-structure perovskite solar cells with high power conversion efficiency by inserting CuI between PEDOT and MAPbI3 layers
- 22 October 2020
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 32 (10) , 12929-12938
Improved photostability of inverted-structure perovskite solar cells with high power conversion efficiency by inserting CuI between PEDOT and MAPbI3 layers
- 1 October 2019
- Published by Elsevier in Organic Electronics
- Vol. 73, 130-136
Enhanced power conversion efficiency and preferential orientation of the MAPbI3 perovskite solar cells by introduction of urea as additive
- 1 October 2019
- Published by Elsevier in Organic Electronics
- Vol. 73, 130-136
Enhanced power conversion efficiency and preferential orientation of the MAPbI3 perovskite solar cells by introduction of urea as additive
- 1 September 2019
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 200
Improved performance of inverted perovskite solar cells due to the incorporation of zirconium acetylacetonate buffer layer
- 1 September 2019
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 200
Improved performance of inverted perovskite solar cells due to the incorporation of zirconium acetylacetonate buffer layer