TPTobias V. Pfeiffer

Tobias V. Pfeiffer

*This is an algorithmically generated author record based on publicly available information.

Tobias V. Pfeiffer has a total of 99 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Top Cited Papers

    Scalable synthesis of Cu-cluster catalysts via spark ablation for the electrochemical conversion of CO2 to acetaldehyde

    by Cedric David Koolen, Jack Kirk Pedersen, Bernardus Zijlstra, Maximilian Winzely, Jie Zhang, Tobias V. Pfeiffer, Wilbert Vrijburg, Mo Li, Ayush Agarwal, Zohreh Akbari, et al.


  • Open Access

    Black carbon instrument responses to laboratory generated particles

    by Laura Salo, Karri Saarnio, Sanna Saarikoski, Kimmo Teinilä, Luis M.F. Barreira, Petteri Marjanen, Sampsa Martikainen, Helmi Keskinen, Katja Mustonen, Teemu Lepistö, et al.


  • Open Access

    Spark Ablation for the Fabrication of PEM Water Electrolysis Catalyst-Coated Membranes

    by Foteini M. Sapountzi, Marek Lavorenti, Wilbert Vrijburg, Sofia Dimitriadou, Beata Tyburska-Pueschel, Peter Thüne, Hans Niemantsverdriet, Tobias V. Pfeiffer, Mihalis N. Tsampas

    Proton-exchange-membrane (PEM) electrolyzers represent a promising technology for sustainable hydrogen production, owing to their efficiency and load flexibility. However, the acidic nature of PEM demands the use of platinum-group metal-electrocatalysts. Apart from the associated high capital costs, the scarcity of Ir hinders the large-scale implementation of the technology. Since low-cost replacements for Ir are not available at present, there is an urgent need to engineer catalyst-coated membranes (CCMs) with homogeneous catalyst layers at low Ir loadings. Efforts to realize this mainly rely on the development of advanced Ir nanostructures with maximized dispersion via wet chemistry routes. This study demonstrates the potential of an alternative vapor-based process, based on spark ablation and impaction, to fabricate efficient and durable Ir- and Pt-coated membranes. Our results indicate that spark-ablation CCMs can reduce the Ir demand by up to five times compared to commercial CCMs, without a compromise in activity. The durability of spark-ablation CCMs has been investigated by applying constant and dynamic load profiles for 150 h, indicating different degradation mechanisms for each case without major pitfalls. At constant load, an initial degradation in performance was observed during the first 30 h, but a stable degradation rate of 0.05 mV h−1 was sustained during the rest of the test. The present results, together with manufacturing aspects related to simplicity, costs and environmental footprint, suggest the high potential of spark ablation having practical applications in CCM manufacturing.


  • Preparation of Catalyst Coated Membranes for PEM Water Electrolysis Via Spark Ablation

    by Wilbert L. Vrijburg, Foteini M. Sapountzi, Sofia Dimitriadou, Marek Lavorenti, Tobias V. Pfeiffer, Michail N. Tsampas

    Water electrolysis is expected to play a crucial role to the transition towards a hydrogen-based, low carbon economy. Among the various technologies for water electrolysis technologies, the one using proton exchange membranes (PEM) holds promise due to its high efficiency, load flexibility and compact design. However, the acidic environment in the PEM creates a harsh operating environment which entails the use of scarce and expensive metals (Pt and Ir) which account for 38% of the cost of a catalyst coated membrane (CCM). Moreover, the high scarcity of Ir is considered as the grand challenge of this technology.1 To relieve high raw material costs and to mitigate the Ir-dependence of PEM electrolysis, the development of advanced CCMs with improved Ir utilization is essential. Most of studies so far have focused on the development of high-structured catalysts, either by maximizing the Ir dispersion with using high surface area supports or by using alternative catalyst nanostructures.2 In all these conventional routes, the CCM manufacturing process is multi-step and primarily ink-based. Steps include ink preparation (from metallic nanoparticles), ink application onto the PEM to yield the catalyst-coated product, and several intermediate drying stages. The use of improved catalyst layer manufacturing techniques has been proposed as an alternative route to produce catalyst-coated membranes (CCMs) with low Ir loadings, without compromising in activity or durability. However, such concepts are less represented in literature. Despite this, the use of vapor-based processes for the manufacturing of nanomaterials for PEM electrolysers has key benefits over ink-based processes including the simplification of the production process, the reduction of catalyst loading, and the deposition of more uniform thin layers of material.3 In this work, we prepared CCMs using a solvent free, gas-phase method, comprising spark ablation and impaction,4 to produce iridium-based nanoparticles (IrNPs) for PEM water electrolysers. IrNPs were produced at ambient temperature and pressure conditions in the gas phase using Ir rods as the nanomaterial source. The nanoparticle aerosol was then directed towards a nozzle and deposited onto a Nafion 115 membrane via inertial impaction. By securing the membrane on an XY-stage, a 4 cm2 catalyst coating was printed. The Ir content on the Nafion membrane was controlled by varying the printing speed. The prepared CCMs were characterized using RBS, ICP, SEM, HR-TEM, XRD, and XPS. The CCMs prepared via spark ablation comprised of a homogeneous, dense, porous layer of amorphous IrO2 nanoparticles (Figure 1a) with an average particle size of 2 nm. The Ir-based CCMs were employed in a single-cell PEM water electrolyser and complete performance assessment was performed at 60 °C, focusing both on activity and durability. Our results show that the CCMs prepared with spark ablation outperform the benchmark (commercial) CCM (Figure 1b) despite using considerably less Ir (Figure 1c). Specifically, up to 5-fold improvement in Ir utilization (i.e. 5-fold decrease in Ir-specific power density) was obtained. To assess durability, both transient and dynamic service conditions were simulated by using different time-profiles for the power input. The overall profile of the constant load durability test indicated that irreversible changes occurred at the CCM during the first 30 h, while afterwards a stable degradation rate of 0.05 mV h-1 was sustained for >60 h. A similar degradation rate was also obtained with the benchmark CCM. Based on this rate and assuming a cut-off voltage of 2.2 V, the expected lifetime of our CCM is 10,000 h, which is the minimum requirement for industrial operation. Overall, our results showcase the feasibility of the spark ablation technology as a scalable and efficient method to achieve reduced Ir loading and better performing CCMs for PEM water electrolysis. Taking into account the simplicity of the process, this technology has also the potential to relieve the high CCM manufacturing costs of conventional approaches, which currently account for 42% of the total CCM cost.1 IRENA, Green Hydrogen Cost Reduction – Scaling up electrolysers to meet the 1.5 °C climate goal, International Renewable Energy Agency (IRENA), Abu Dhabi, (2020). F. M. Sapountzi, J. M. Gracia, C. J. (Kees-J. Weststrate, H. O. A. Fredriksson, and J. W. (Hans) Niemantsverdriet, Prog. Energy Combust. Sci., 58, 1–35 (2017). R. J. Ouimet et al., Energy & Fuels, 35, 1933–1956 (2021). M. F. J. Boeije et al., in Spark Ablation: Building Blocks for Nanotechnology,, p. 49–108, CRC Press (2019). Figure 1


  • Open Access

    Quantum Sensing with Extreme Light

    by Mirco Kutas, Björn Erik Haase, Felix Riexinger, Joshua Hennig, Patricia Bickert, Tobias Pfeiffer, Michael Bortz, Daniel Molter, Georg von Freymann

    Optical nonlinear conversion processes are ubiquitously applied to scientific as well as industrial tasks. In particular, nonlinear processes are employed to generate radiation in many frequency ranges. In plenty of these nonlinear processes, the generation of paired photons occurs — the so‐called signal and idler photons. Although this type of generation has undergone a tremendous development over the last decades, either the generated signal or the idler radiation has been used experimentally. In contrast, novel quantum‐based measurement principles enable the usage of both partners of the generated photon pairs based on their correlation. These measurement approaches have an enormous potential for future applications, as they allow to transfer information from one spectral range to another. In particular, spectral ranges where photon generation and detection is particularly challenging can benefit from this principle. Above all, these include the extreme frequency ranges, such as on the low‐frequency side the mid to far infrared or even the terahertz spectral range, but also on the high‐frequency side the ultraviolet or X‐ray spectral range. In this review article, theoretical and experimental developments based on correlated biphotons are described specifically for the extreme spectral regions.


  • Open Access

    TUBE Project: Transport-Derived Ultrafines and the Brain Effects

    by Maria-Viola Martikainen, Päivi Aakko-Saksa, Lenie van Den Broek, Flemming R. Cassee, Roxana O. Carare, Sweelin Chew, Andras Dinnyes, Rosalba Giugno, Katja M. Kanninen, Tarja Malm, et al.

    The adverse effects of air pollutants on the respiratory and cardiovascular systems are unquestionable. However, in recent years, indications of effects beyond these organ systems have become more evident. Traffic-related air pollution has been linked with neurological diseases, exacerbated cognitive dysfunction, and Alzheimer’s disease. However, the exact air pollutant compositions and exposure scenarios leading to these adverse health effects are not known. Although several components of air pollution may be at play, recent experimental studies point to a key role of ultrafine particles (UFPs). While the importance of UFPs has been recognized, almost nothing is known about the smallest fraction of UFPs, and only >23 nm emissions are regulated in the EU. Moreover, the role of the semivolatile fraction of the emissions has been neglected. The Transport-Derived Ultrafines and the Brain Effects (TUBE) project will increase knowledge on harmful ultrafine air pollutants, as well as semivolatile compounds related to adverse health effects. By including all the major current combustion and emission control technologies, the TUBE project aims to provide new information on the adverse health effects of current traffic, as well as information for decision makers to develop more effective emission legislation. Most importantly, the TUBE project will include adverse health effects beyond the respiratory system; TUBE will assess how air pollution affects the brain and how air pollution particles might be removed from the brain. The purpose of this report is to describe the TUBE project, its background, and its goals.


  • Open Access

    A Scalable High-Throughput Deposition and Screening Setup Relevant to Industrial Electrocatalysis

    by René Becker, Katharina Weber, Tobias V. Pfeiffer, Jan van Kranendonk, Klaas Jan Schouten

    The identification and optimization of electrode materials is of great importance in the study of (flow and solid state) batteries, industrial electrocatalysis and analytical devices such as sensors. To identify useful materials from a virtually unbound set of metals, alloys and semiconductors, high-throughput techniques are of vital importance. In this paper we present a high-throughput setup that consists of 64 parallel plate electrochemical flow cells, with the anode and cathode compartments separated by a membrane. These cells can be operated sequentially or batch-wise in parallel, using a matrix-addressing approach that allows for scaling up to larger electrode matrices with minimal instrumentation cost. The setup was validated for the preparation and screening of electrode materials under hydrodynamic conditions at industrially relevant current densities, which showed that it could be used to identify optimal catalysts and the robustness of catalyst preparation. The results of the small scale experiments followed theoretical predictions and were used to optimize larger scale experiments.


  • Open Access

    Photonic terahertz technology for layer thickness measurements (Conference Presentation)

    by Daniel Molter, Jens Klier, Stefan Weber, Tobias Pfeiffer, Michael Kolano, Oliver Boidol, Mirco Kutas, Björn Haase, Joachim Jonuscheit, Georg von Freymann

    Layer-thickness measurement is one of the most promising and attractive fields of application for terahertz measurement systems, as they really provide benefits in comparison to competing techniques. In contrast to ultrasound systems, terahertz measurements can be carried out without a coupling medium and is therefore a truly contactless measurement. The possibility to measure individual layers in a multilayer stack is highly advantageous in contrast to established eddy current measurement devices. Unlike X-ray devices, terahertz radiation of common measurement systems is not harmful to biological tissue. Terahertz measurement systems have undergone a remarkable development in terms of the performance as well as in the evaluation algorithms. Increase of speed and enhancement of measurement robustness make these optically complex systems ready for industrial employment. In our contribution, we will cover the development of photonic terahertz measurement systems with a focus on terahertz layer thickness determination.

  • New developments in spark production of nanoparticles

    by T.V. Pfeiffer, J. Feng, A. Schmidt-Ott


  • Reduced Enthalpy of Metal Hydride Formation for Mg–Ti Nanocomposites Produced by Spark Discharge Generation

    by Anca Anastasopol, Tobias V. Pfeiffer, Joost Middelkoop, Ugo Lafont, Roger J. Canales-Perez, Andreas Schmidt-Ott, Fokko M. Mulder, Stephan W.H. Eijt

    Spark discharge generation was used to synthesize Mg–Ti nanocomposites consisting primarily of a metastable body-centered-cubic (bcc) alloy of Mg and Ti. The bcc Mg–Ti alloy transformed upon hydrogenation into the face-centered-cubic fluorite Mg1-yTiyHx phase with favorable hydrogen storage properties. Both metal and metal hydride nanocomposites showed a fractal-like porous morphology, with a primary particle size of 10–20 nm. The metal content of 70 atom % (at %) Mg and 30 at % Ti, consistently determined by XRD, TEM-EDS, and ICP-OES, was distributed uniformly across the as-prepared sample. Pressure–composition isotherms for the Mg–Ti–H nanocomposites revealed large differences in the thermodynamics relative to bulk MgH2, with a much less negative enthalpy of formation of the hydride as small as −45 ± 3 kJ/molH2 as deduced from van’t Hoff plots. The plateau pressures of hydrogenation were substantially higher than those for bulk MgH2 in the low temperature range from 150 to 250 °C. The reaction entropy was simultaneously reduced to values down to 84 ± 5 J/K mol H2, following a linear relationship between the enthalpy and entropy. Plausible mechanisms for the modified thermodynamics are discussed, including the effect of lattice strains, the presence of interfaces and hydrogen vacancies, and the formation of excess free volume due to local deformations. These mechanisms all rely on the finely interdispersed nanocomposite character of the samples which is maintained by grain refinement.