Zhenghong Gao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zhenghong Gao has a total of 113 co-authors. Here are the top co-authors by number of shared publications:
Jiangtao Huang
China Aerodynamics Research and Development Center
7 shared publications- Shu-Sheng Chen
School of Aeronautics, Northwestern Polytechnical University 1 , Xi'an 710072
7 shared publications Chao Wang
5 shared publications- Fang Xu
Southern University of Science and Technology
5 shared publications - Ban Wang
School of Aeronautics, Northwestern Polytechnical University, Xi'an 710072, China; National Key Laboratory of Aircraft Configuration Design, Xi'an 710072, China
4 shared publications - Bowen Shu
School of Aeronautics, Northwestern Polytechnical University, Xi’an 710072, China
4 shared publications
Latest Publications
- Top Cited Papers
- 12 May 2026
- Published by Elsevier in ISA Transactions
- Vol. 175, 126-138
Fixed-time adaptive fault-tolerant control of a multi-mode VTOL UAV with variable prescribed performance boundaries under random disturbances
- 12 May 2026
- Published by Elsevier in ISA Transactions
- Vol. 175, 126-138
Top Cited PapersFixed-time adaptive fault-tolerant control of a multi-mode VTOL UAV with variable prescribed performance boundaries under random disturbances
- 1 July 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (7)
Supersonic low-boom and low-drag coupled area rules for transport efficient design
Environmentally sustainable supersonic transport (SST) has become one trend of future civil aviation. Next-generation SST attaches great importance to sonic boom mitigation and drag reduction. It also puts forward demands to efficient and significant approaches to supersonic aircraft design. The paper innovatively couples Whitham sonic boom area rule and Whitcomb drag area rule based on equivalent cross-sectional area. It then establishes an efficient SST analysis and optimization approach from the perspective of coupling area rules. The approach demonstrates orders-of-magnitude efficiency advantage over computational fluid dynamics (CFD). Two optimization cases of a typical configuration delta wing body are implemented for verification. Equivalent cross-sectional areas are getting continuously smoother during the optimization. The fuselage optimization decreases maximum overpressure in far field by 13.45%, Perceived Level in Decibels (PLdB) by 1.7117 as well as drag coefficient by 6.72%. The full aircraft optimization yields 29.78% overpressure mitigation, 4.0798 PLdB reduction and 15.30% drag decrease. All results are validated by CFD and satisfy the analysis of coupled area rules. The cases indicate smoother cross-sectional area distribution facilitates sonic boom and drag mitigation simultaneously. Coupled area rules provide a novel view and efficient approach for SST design. The approach shows particular applicability in conceptual design with the advantage of high efficiency.
- 1 July 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (7)
Supersonic low-boom and low-drag coupled area rules for transport efficient design
Environmentally sustainable supersonic transport (SST) has become one trend of future civil aviation. Next-generation SST attaches great importance to sonic boom mitigation and drag reduction. It also puts forward demands to efficient and significant approaches to supersonic aircraft design. The paper innovatively couples Whitham sonic boom area rule and Whitcomb drag area rule based on equivalent cross-sectional area. It then establishes an efficient SST analysis and optimization approach from the perspective of coupling area rules. The approach demonstrates orders-of-magnitude efficiency advantage over computational fluid dynamics (CFD). Two optimization cases of a typical configuration delta wing body are implemented for verification. Equivalent cross-sectional areas are getting continuously smoother during the optimization. The fuselage optimization decreases maximum overpressure in far field by 13.45%, Perceived Level in Decibels (PLdB) by 1.7117 as well as drag coefficient by 6.72%. The full aircraft optimization yields 29.78% overpressure mitigation, 4.0798 PLdB reduction and 15.30% drag decrease. All results are validated by CFD and satisfy the analysis of coupled area rules. The cases indicate smoother cross-sectional area distribution facilitates sonic boom and drag mitigation simultaneously. Coupled area rules provide a novel view and efficient approach for SST design. The approach shows particular applicability in conceptual design with the advantage of high efficiency.
- Open Access
Two-Stage Global–Local Aerodynamic/Stealth Optimization Method Based on Space Decomposition
The design of the flying wing airfoil must consider aerodynamic stealth and trim requirements, with their coupling exacerbating the complexity of the design problem by introducing multiple local minimum points in design space. In addition, it would need a broad space with high dimensionality to obtain the ideal result, and expansion of design space could lead to more local minimum points, causing significant challenges to traditional optimization design methods. A Two-Stage Global–Local Constrained Optimization Method (TGLCOM) was proposed to address these issues. The parametric space was divided into a large-scale global space and a high-dimensional local space. A surrogate-based global constrained optimization method was applied in the large-scale global space, followed by a gradient-based algorithm in the high-dimensional local space to refine the design and obtain the global optima. The efficiency and robustness of the proposed TGLCOM were verified through the airfoil and flying wing layout aero/stealth design. The results indicated a minor conflict between the RCS drag and pitch moment performance. Moreover, the stealth design of the airfoil improved the stealth performance of the flying wing layout in both the yaw and pitch directions.
Open AccessTwo-Stage Global–Local Aerodynamic/Stealth Optimization Method Based on Space Decomposition
The design of the flying wing airfoil must consider aerodynamic stealth and trim requirements, with their coupling exacerbating the complexity of the design problem by introducing multiple local minimum points in design space. In addition, it would need a broad space with high dimensionality to obtain the ideal result, and expansion of design space could lead to more local minimum points, causing significant challenges to traditional optimization design methods. A Two-Stage Global–Local Constrained Optimization Method (TGLCOM) was proposed to address these issues. The parametric space was divided into a large-scale global space and a high-dimensional local space. A surrogate-based global constrained optimization method was applied in the large-scale global space, followed by a gradient-based algorithm in the high-dimensional local space to refine the design and obtain the global optima. The efficiency and robustness of the proposed TGLCOM were verified through the airfoil and flying wing layout aero/stealth design. The results indicated a minor conflict between the RCS drag and pitch moment performance. Moreover, the stealth design of the airfoil improved the stealth performance of the flying wing layout in both the yaw and pitch directions.
- Open Access
Airfoil Design Optimization of Blended Wing Body for Various Aerodynamic and Stealth Stations
The airfoil is the foundation of an aircraft, and its characteristics have a significant impact on those of the aircraft. Conventional airfoil design mainly focuses on improving aerodynamic performance, while flying wing airfoil designs should also consider layout stability and stealth performance. The design requirements for an airfoil vary with its position on the flying wing layout aircraft based on corresponding spanwise flow field characteristics. By analyzing the spanwise flow characteristics of the flying wing, partition design models for flying wing airfoils were established in this study, and a series of flying wing airfoil designs that consider aerodynamics and aerodynamic/stealth were implemented. Then, the designed airfoils were configured on a three-dimensional X-47B layout for testing and verification. The results showed that the aerodynamic design and the aerodynamic/stealth design exhibited significant improvements in terms for aerodynamic and longitudinal trimming characteristics. However, the cruise drag performance of the aerodynamic/stealth design was slightly worse than that of the aerodynamic design, although the longitudinal moment trimming characteristics were basically the same. The stealth characteristics of the aerodynamic/stealth design had significant advantages, indicating that there were weak contradictions between the aerodynamic, stealth, and trimming requirements in the design of the flying wing.
Open AccessAirfoil Design Optimization of Blended Wing Body for Various Aerodynamic and Stealth Stations
The airfoil is the foundation of an aircraft, and its characteristics have a significant impact on those of the aircraft. Conventional airfoil design mainly focuses on improving aerodynamic performance, while flying wing airfoil designs should also consider layout stability and stealth performance. The design requirements for an airfoil vary with its position on the flying wing layout aircraft based on corresponding spanwise flow field characteristics. By analyzing the spanwise flow characteristics of the flying wing, partition design models for flying wing airfoils were established in this study, and a series of flying wing airfoil designs that consider aerodynamics and aerodynamic/stealth were implemented. Then, the designed airfoils were configured on a three-dimensional X-47B layout for testing and verification. The results showed that the aerodynamic design and the aerodynamic/stealth design exhibited significant improvements in terms for aerodynamic and longitudinal trimming characteristics. However, the cruise drag performance of the aerodynamic/stealth design was slightly worse than that of the aerodynamic design, although the longitudinal moment trimming characteristics were basically the same. The stealth characteristics of the aerodynamic/stealth design had significant advantages, indicating that there were weak contradictions between the aerodynamic, stealth, and trimming requirements in the design of the flying wing.
- 5 July 2024
- Published by Springer Nature
- p. 457-472
Investigations on Sonic Boom Mitigation Effect for Supersonic Transport Based on Quiet Spike
- 5 July 2024
- Published by Springer Nature
- p. 457-472
Investigations on Sonic Boom Mitigation Effect for Supersonic Transport Based on Quiet Spike
- 1 July 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (7)
Airfoil aerodynamic/stealth design based on conditional generative adversarial networks
Aerodynamic/stealth design is becoming an important factor in the advanced airfoil design. In this work, a supervised machine learning method is proposed for aerodynamic and stealth integrated airfoil design. The conditional generative adversarial network (CGAN) is constructed for the multidisciplinary design of airfoil. Then, the generator and discriminator simply using deep neural network have good robustness and stability in training. The CGAN model also shows good generalization capability in the test set, with less than 1% error in fitting to the airfoil profile data, and the generated airfoils are within 10% error compared to the test airfoil aerodynamic stealth characteristics. In addition, the optimization results based on the CGAN model demonstrate that aerodynamic performance improvement would increase the airfoil camber and stealth performance improvement would sharpen the airfoil leading edge.
- 1 July 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (7)
Airfoil aerodynamic/stealth design based on conditional generative adversarial networks
Aerodynamic/stealth design is becoming an important factor in the advanced airfoil design. In this work, a supervised machine learning method is proposed for aerodynamic and stealth integrated airfoil design. The conditional generative adversarial network (CGAN) is constructed for the multidisciplinary design of airfoil. Then, the generator and discriminator simply using deep neural network have good robustness and stability in training. The CGAN model also shows good generalization capability in the test set, with less than 1% error in fitting to the airfoil profile data, and the generated airfoils are within 10% error compared to the test airfoil aerodynamic stealth characteristics. In addition, the optimization results based on the CGAN model demonstrate that aerodynamic performance improvement would increase the airfoil camber and stealth performance improvement would sharpen the airfoil leading edge.
- Open Access
Gust Load Alleviation Control Strategies for Large Civil Aircraft through Wing Camber Technology
This paper introduces three new gust load alleviation control strategies, which are based on variable camber technology, to achieve the design requirements for the safety, economy, and comfort of modern civil aircraft. These strategies involve adjusting the inner and outer flap differential of wings, spoilers, and ailerons to alter the aerodynamic shape of the aircraft structure, resulting in drag reduction and gust load alleviation during stepped cruise flights. Furthermore, a logic design is provided for both the cruise drag reduction function and the gust load alleviation function. To validate the effectiveness of the proposed gust load alleviation control strategies, simulation results are presented, utilizing ride quality and wing root bending moment changes as the evaluation criteria. The presented approaches ultimately lead to the development of an optimal scheme that meets the desired design requirements.
Open AccessGust Load Alleviation Control Strategies for Large Civil Aircraft through Wing Camber Technology
This paper introduces three new gust load alleviation control strategies, which are based on variable camber technology, to achieve the design requirements for the safety, economy, and comfort of modern civil aircraft. These strategies involve adjusting the inner and outer flap differential of wings, spoilers, and ailerons to alter the aerodynamic shape of the aircraft structure, resulting in drag reduction and gust load alleviation during stepped cruise flights. Furthermore, a logic design is provided for both the cruise drag reduction function and the gust load alleviation function. To validate the effectiveness of the proposed gust load alleviation control strategies, simulation results are presented, utilizing ride quality and wing root bending moment changes as the evaluation criteria. The presented approaches ultimately lead to the development of an optimal scheme that meets the desired design requirements.
- Open Access
Aerodynamic Characteristics of the Novel Two-Dimensional Enhanced Shock Vector Nozzle
Fluid thrust vectoring (FTV) control has obvious advantages in structural quality and stealth performance because of its fast response and light weight. However, improving FTV vector performance will cause a loss in engine performance due to the need to draw airflow from the engine. In order to alleviate the above problems and further improve the vector performance of FTV, a nozzle combined with throat skewing and shock vector control is proposed, and the secondary flow of the nozzle comes from the throat and is injected into the nozzle divergence section. The numerical results indicate that compared with the original configuration, the vector angle and vector efficiency of the new configuration are more linear with the nozzle pressure ratio (NPR), and the vector angle and vector efficiency are improved by 163% and 218%, respectively, while experiencing a maximum reduction in the thrust coefficient of 1.4%. Compared with the only bypass-type shock vector nozzle, the new configuration utilizes the diversion of the two jets to eliminate the reattachment of the separation bubble after the jet and its resulting abrupt change in vector performance, improving the performance while having good control characteristics. Additionally, a sensitivity analysis of the spacing between two jets is also carried out. The spacing between two jets should be increased to make the flow pass through two weaker shock waves to improve the vector performance while ensuring that the separation after the jet is no longer attached.
Open AccessAerodynamic Characteristics of the Novel Two-Dimensional Enhanced Shock Vector Nozzle
Fluid thrust vectoring (FTV) control has obvious advantages in structural quality and stealth performance because of its fast response and light weight. However, improving FTV vector performance will cause a loss in engine performance due to the need to draw airflow from the engine. In order to alleviate the above problems and further improve the vector performance of FTV, a nozzle combined with throat skewing and shock vector control is proposed, and the secondary flow of the nozzle comes from the throat and is injected into the nozzle divergence section. The numerical results indicate that compared with the original configuration, the vector angle and vector efficiency of the new configuration are more linear with the nozzle pressure ratio (NPR), and the vector angle and vector efficiency are improved by 163% and 218%, respectively, while experiencing a maximum reduction in the thrust coefficient of 1.4%. Compared with the only bypass-type shock vector nozzle, the new configuration utilizes the diversion of the two jets to eliminate the reattachment of the separation bubble after the jet and its resulting abrupt change in vector performance, improving the performance while having good control characteristics. Additionally, a sensitivity analysis of the spacing between two jets is also carried out. The spacing between two jets should be increased to make the flow pass through two weaker shock waves to improve the vector performance while ensuring that the separation after the jet is no longer attached.
- Open Access
- 1 March 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (3)
Unsteady aerodynamic characteristics of a morphing tail configuration
Morphing aircraft is an important trend in the future development of next-generation aircraft. This paper focuses on aircraft with a small aspect ratio flying wing configuration that includes morphing tails. The unsteady aerodynamic characteristics of the morphing tail configuration are numerically simulated using the unstructured overset grid technique and the dual-time method, focusing on the effects of the tail deflection angle over time, Mach number, and side slip angle on the unsteady aerodynamic characteristics of the entire aircraft and tails. The second derivative of the tail deflection angle with time should be continuous, and the maximum angular velocity and maximum angular acceleration should be minimized. The hysteresis loop area is closely related to the Mach number. The sideslip angle aggravates the nonlinearity of the unsteady aerodynamic characteristics of the entire aircraft. The unsteady aerodynamic characteristics during tail morphing are affected by static (wing downwash effect and projected area effect) and dynamic (flow field hysteresis effect, additional motion effect, and wall implication effect) characteristics. The enclosed research provides a reference for the aerodynamic and control system designs of morphing tail configurations.
- 1 March 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (3)
Open AccessUnsteady aerodynamic characteristics of a morphing tail configuration
Morphing aircraft is an important trend in the future development of next-generation aircraft. This paper focuses on aircraft with a small aspect ratio flying wing configuration that includes morphing tails. The unsteady aerodynamic characteristics of the morphing tail configuration are numerically simulated using the unstructured overset grid technique and the dual-time method, focusing on the effects of the tail deflection angle over time, Mach number, and side slip angle on the unsteady aerodynamic characteristics of the entire aircraft and tails. The second derivative of the tail deflection angle with time should be continuous, and the maximum angular velocity and maximum angular acceleration should be minimized. The hysteresis loop area is closely related to the Mach number. The sideslip angle aggravates the nonlinearity of the unsteady aerodynamic characteristics of the entire aircraft. The unsteady aerodynamic characteristics during tail morphing are affected by static (wing downwash effect and projected area effect) and dynamic (flow field hysteresis effect, additional motion effect, and wall implication effect) characteristics. The enclosed research provides a reference for the aerodynamic and control system designs of morphing tail configurations.
- 1 January 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (1)
Deep learning for airfoil aerodynamic-electromagnetic coupling optimization with random forest
Reducing the design variable space is crucial in multi-objective airfoil profile optimization to improve optimization efficiency and reduce computational costs. Based on random forest and deep neural networks (DNNs), this work performs range reduction on ten design variables obtained through a fourth-order class shape transformation parameterization method for subsonic airfoil profiles. Three aerodynamic performance objectives (lift coefficient, drag coefficient, and lift-to-drag ratio) are evaluated using the Reynolds-averaged Navier–Stokes equations, and two radar stealth performance objectives (horizontal and vertical polarization radar cross sections) are assessed through the method of moments. By combining a DNN architecture with an improved regression prediction capability, predictive models are trained for mapping design variables to design objectives. The prediction errors are below 3% for the aerodynamic performance design objectives and below 1% for the stealth performance design objectives. The particle swarm optimization algorithm provides optimized airfoil profiles for three scenarios. First is a higher lift coefficient with a lower radar cross section. Second is a lower radar cross section. Third is a higher lift coefficient. Increasing the airfoil curvature and reducing the maximum thickness improves the lift coefficient by 386 counts and reduces the drag coefficient by 17 counts. By curving the airfoil leading edge, the radar cross section for the transverse electric and transverse magnetic polarizations decreased by 2.78 and 2.09 dBsm, respectively.
- 1 January 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (1)
Deep learning for airfoil aerodynamic-electromagnetic coupling optimization with random forest
Reducing the design variable space is crucial in multi-objective airfoil profile optimization to improve optimization efficiency and reduce computational costs. Based on random forest and deep neural networks (DNNs), this work performs range reduction on ten design variables obtained through a fourth-order class shape transformation parameterization method for subsonic airfoil profiles. Three aerodynamic performance objectives (lift coefficient, drag coefficient, and lift-to-drag ratio) are evaluated using the Reynolds-averaged Navier–Stokes equations, and two radar stealth performance objectives (horizontal and vertical polarization radar cross sections) are assessed through the method of moments. By combining a DNN architecture with an improved regression prediction capability, predictive models are trained for mapping design variables to design objectives. The prediction errors are below 3% for the aerodynamic performance design objectives and below 1% for the stealth performance design objectives. The particle swarm optimization algorithm provides optimized airfoil profiles for three scenarios. First is a higher lift coefficient with a lower radar cross section. Second is a lower radar cross section. Third is a higher lift coefficient. Increasing the airfoil curvature and reducing the maximum thickness improves the lift coefficient by 386 counts and reduces the drag coefficient by 17 counts. By curving the airfoil leading edge, the radar cross section for the transverse electric and transverse magnetic polarizations decreased by 2.78 and 2.09 dBsm, respectively.