CBCalvin J. Brett

Calvin J. Brett

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Calvin J. Brett has a total of 150 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Hydro‐ and Lipophilicity of Molecular‐Size‐Controlled Hydrogel Drug Carriers

    by Elisabeth Erbes, Naireeta Biswas, Calvin J. Gavillet, Matthias Schwartzkopf, Krishnayan Basuroy, Qing Chen, Andrei Chumakov, Susann Frenzke, Marc Gensch, Korneliya Gordeyeva, et al.

    Nano‐sized hydrogel drug carriers with tailored hydro‐ and lipophilicity are designed and their encapsulation and structure‐forming capabilities investigated in real‐time. These nano‐carriers are built from cellulose and peptide hydrogels in tandem with a nano‐stacked interwoven design and alternating hydro‐ and lipophilicity, thus enabling tuning of the lipophilicity of the carrier mesh for drugs of complementary lipophilicities. This allows for a variety of therapeutic applications, based on the nanoproperties of the hydrogel. Time‐resolved and in situ grazing incidence x‐ray scattering studies confirm the design and hydro‐ and lipophilicities of the fiber‐hydrogel composite and conclude their ability for carrying drugs of complementary properties site specific. This approach allows for a novel way of understanding the functionality of drug carriers using photon‐based approach.

  • Open Access

    Confinement-Induced Self-Assembly of Protein Nanofibrils Probed by Microfocus X-ray Scattering

    by Saeed Davoodi, Eirini Ornithopoulou, Calvin J. Gavillet, Anton Davydok, Stephan V. Roth, Christofer Lendel, Fredrik Lundell

    We here explore confinement-induced assembly of whey protein nanofibrils (PNFs) into microscale fibers using microfocused synchrotron X-ray scattering. Solvent evaporation aligns the PNFs into anisotropic fibers, and the process is followed in situ by scattering experiments within a droplet of PNF dispersion. We find an optimal temperature at which the order parameter of the protein fiber is maximized, suggesting that the degree of order results from a balance between the time scales of the forced alignment and the rotational diffusion of the fibrils. Furthermore, the assembly process is shown to depend on the nanoscale morphology and flexibility of the PNFs. Stiff/straight PNFs with long persistence lengths (∼2 μm) align at the air-water interface, with anisotropy decreasing toward the center of the droplet as Marangoni flows increase entanglement toward the center. By contrast, flexible/curved PNFs with shorter persistence lengths (<100 nm) align more uniformly throughout the droplet, likely due to enhanced local entanglements. Straight PNFs pack tightly, forming smaller clusters with short intercluster distances, while curved PNFs form intricate, adaptable networks with larger characteristic distances and more varied structures.


  • Open Access

    Scalable Paper Supercapacitors for Printed Wearable Electronics

    by Mehmet Girayhan Say, Calvin J. Brett, Jesper Edberg, Stephan V. Roth, L. Daniel Söderberg, Isak Engquist, Magnus Berggren

    Printed paper-based electronics offers solutions to rising energy concerns by supplying flexible, environmentally friendly, low-cost infrastructure for portable and wearable electronics. Herein, we demonstrate a scalable spray-coating approach to fabricate tailored paper poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS)/cellulose nanofibril (CNF) electrodes for all-printed supercapacitors. Layer-by-layer spray deposition was used to achieve high-quality electrodes with optimized electrode thickness. The morphology of these electrodes was analyzed using advanced X-ray scattering methods, revealing that spray-coated electrodes have smaller agglomerations, resulting in a homogeneous film, ultimately suggesting a better electrode manufacturing method than drop-casting. The printed paper-based supercapacitors exhibit an areal capacitance of 9.1 mF/cm2, which provides enough energy to power electrochromic indicators. The measured equivalent series resistance (ESR) is as low as 0.3 Ω, due to improved contact and homogeneous electrodes. In addition, a demonstrator in the form of a self-powered wearable wristband is shown, where a large-area (90 cm2) supercapacitor is integrated with a flexible solar cell and charged by ambient indoor light. This demonstration shows the tremendous potential for sequential coating/printing methods in the scaling up of printed wearables and self-sustaining systems.


  • Open Access

    Sprayed Nanometer-Thick Hard-Magnetic Coatings with Strong Perpendicular Anisotropy for Data Storage Applications

    by Andrei Chumakov, Calvin J. Brett, Korneliya Gordeyeva, Dirk Menzel, Lewis O. O. Akinsinde, Marc Gensch, Matthias Schwartzkopf, Wei Cao, Shanshan Yin, Manuel A. Reus, et al.


  • Open Access

    Correlating Optical Reflectance with the Topology of Aluminum Nanocluster Layers Growing on Partially Conjugated Diblock Copolymer Templates

    by Marc Gensch, Matthias Schwartzkopf, Calvin J. Brett, Simon J. Schaper, Nian Li, Wei Chen, Suzhe Liang, Jonas Drewes, Oleksandr Polonskyi, Thomas Strunskus, et al.


  • Open Access

    Nanocellulose-Assisted Thermally Induced Growth of Silver Nanoparticles for Optical Applications

    by Calvin J. Brett, Wiebke Ohm, Björn Fricke, Alexandros E. Alexakis, Tim Laarmann, Volker Körstgens, Peter Müller-Buschbaum, L. Daniel Söderberg, Stephan V. Roth

    Optically responsive materials are present in everyday life, from screens to sensors. However, fabricating large-area, fossil-free materials for functional biocompatible applications is still a challenge today. Nanocelluloses from various sources, such as wood, can provide biocompatibility and are emerging candidates for templating organic optoelectronics. Silver (Ag) in its nanoscale form shows excellent optical properties. Herein, we combine both materials using thin-film large-area spray-coating to study the fabrication of optical response applications. We characterize the Ag nanoparticle formation by X-ray scattering and UV–vis spectroscopy in situ during growth on the nanocellulose template. The morphology and optical properties of the nanocellulose film are compared to the rigid reference surface SiO2. Our results clearly show the potential to tailor the energy band gap of the resulting hybrid material.


  • Open Access

    Humidity‐Induced Nanoscale Restructuring in PEDOT:PSS and Cellulose Nanofibrils Reinforced Biobased Organic Electronics

    by Calvin J. Brett, Ola K. Forslund, Elisabetta Nocerino, Lucas P. Kreuzer, Tobias Widmann, Lionel Porcar, Norifumi L. Yamada, Nami Matsubara, Martin Månsson, Peter Müller‐Buschbaum, et al.

    In times where research focuses on the use of organic polymers as a base for complex organic electronic applications and improving device efficiencies, degradation is still less intensively addressed in fundamental studies. Hence, advanced neutron scattering methods are applied to investigate a model system for organic electronics composed of the widely used conductive polymer blend poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) together with nanocellulose as flexible reinforcing template material. In particular, the impact of relative humidity (RH) on the nanostructure evolution is studied in detail. The implications are discussed from a device performance point of view and the changing nanostructure is correlated with macroscale physical properties such as conductivity. The first humidification (95% RH) leads to an irreversible decrease of conductivity. After the first humidification cycle, however, the conductivity can be reversibly regained when returning to low humidity values (5% RH), which is important for device manufacturing. This finding can directly contribute to an improved usability of emerging organic electronics in daily live.


  • Selective Silver Nanocluster Metallization on Conjugated Diblock Copolymer Templates for Sensing and Photovoltaic Applications

    by Marc Gensch, Matthias Schwartzkopf, Calvin J. Brett, Simon J. Schaper, Lucas P. Kreuzer, Nian Li, Wei Chen, Suzhe Liang, Jonas Drewes, Oleksandr Polonskyi, et al.


  • Open Access

    Modification of cellulose through physisorption of cationic bio-based nanolatexes – comparing emulsion polymerization and RAFT-mediated polymerization-induced self-assembly

    by Alexandros E. Alexakis, Joakim Engström, Arne Stamm, Anastasia V. Riazanova, Calvin J. Brett, Stephan V. Roth, Per-Olof Syrén, Linda Fogelström, Michael S. Reid, Eva Malmström

    The polymerization of a bio-based terpene-derived monomer, sobrerol methacrylate (SobMA), was evaluated in the design of polymeric nanoparticles (nanolatexes). Their synthesis was accomplished by using emulsion polymerization, either by free-radical polymerization in the presence of a cationic surfactant or a cationic macroRAFT agent by employing RAFT-mediated polymerization-induced self-assembly (PISA). By tuning the length of the hydrophobic polymer, it was possible to control the nanoparticle size between 70 and 110 nm. The average size of the latexes in both wet and dry state were investigated by microscopy imaging and dynamic light scattering (DLS). Additionally, SobMA was successfully copolymerized with butyl methacrylate (BMA) targeting soft-core nanolatexes. The comparison of the kinetic profile of the cationically stabilized nanolatexes highlighted the differences of both processes. The SobMA-based nanolatexes yielded high Tg ∼ 120 °C, while the copolymer sample exhibited a lower Tg ∼ 50 °C, as assessed by Differential Scanning Calorimetry (DSC). Thereafter, the nanolatexes were adsorbed onto cellulose (filter paper), where they were annealed at elevated temperatures to result in polymeric coatings. Their morphologies were analysed by Field Emission Scanning Electron Microscopy (FE-SEM) and compared to a commercial sulfate polystyrene latex (PS latex). By microscopic investigation the film formation mechanism could be unravelled. Water contact angle (CA) measurements verified the transition from a hydrophilic to a hydrophobic surface after film formation had occured. The obtained results are promising for the toolbox of bio–based building blocks, focused on sobrerol-based monomers, to be used in emulsion polymerizations either for tailored PISA–latexes or facile conventional latex formation, in order to replace methyl methacrylate or other high Tg-monomers.


  • Exploring the Effects of Different Cross-Linkers on Lignin-Based Thermoset Properties and Morphologies

    by Iuliana Ribca, Marcus E. Jawerth, Calvin J. Brett, Martin Lawoko, Matthias Schwartzkopf, Andrei Chumakov, Stephan V. Roth, Mats Johansson

    The search for sustainable material solutions has put lignin as one of the prime candidates for aromatic building blocks in macromolecular materials. The present study aimed to demonstrate how lignin-based thermoset resins can be utilized in combination with different cross-linkers. Kraft lignin was used to produce thermosets with tunable mechanical and morphological properties. The lignin-based thermosets were obtained via a thermally induced thiol–ene reaction. The first part of this work was focused on Kraft lignin solvent fractionation and chemical modification of the ethanol soluble fraction. Chemical analysis indicated that the allylation process was selective toward phenolic hydroxyl groups. SAXS and SEM studies demonstrated that solvent fractionation and allylation processes affected the molecular and nanoscale morphological characteristics of lignin. The second part’s focus was on how the properties of thermosets can be tuned by using three different cross-linkers. The dynamic mechanical and morphological properties of three different thermosets were investigated via DMA, SAXS, and WAXS techniques. The three different thermosets exhibit similar molecular morphology but different storage modulus and glass transition temperature. In this work, it was shown that despite lignin’s heterogeneity it was possible to produce thermosetting materials with tunable properties.