Robert Lyman Hawley
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Robert Lyman Hawley has a total of 93 co-authors. Here are the top co-authors by number of shared publications:
- Erich C. Osterberg
Department of Earth Sciences, Dartmouth College, Hanover, New Hampshire
4 shared publications - Gabriel Lewis
Department of Natural Resources & Environmental Science University of Nevada Reno Nevada USA
4 shared publications - Hans-Peter Marshall
Boise State University
4 shared publications - Christopher Gerbi
School of Earth and Climate Sciences, University of Maine, 5790 Bryand Global Sciences Center, Orono, Maine 04469
3 shared publications - Forrest McCarthy
Department of Earth Sciences Dartmouth College Hanover NH USA
3 shared publications - Ian Lee
Pennsylvania State University
3 shared publications
Latest Publications
- 18 February 2024
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Planets
- Vol. 129 (2)
Investigating the Linkage Between Spiral Trough Morphology and Cloud Coverage on the Martian North Polar Layered Deposits
The martian North Polar layered deposits (NPLD) are composed of alternating water‐ice and dust‐rich layers resulting from atmospheric deposition and are key to understanding Mars climate cycles. Within these deposits are spiral troughs whose migration affects deposition signals. To understand the relationship between NPLD stratigraphy and Martian climate, we must identify modern‐day drivers of NPLD ice migration. Prevailing theory posits migration driven by upstream‐migrating bed undulations bounded by hydraulic jumps, caused by katabatic winds flowing over trough walls with asymmetric cross‐sectional relief. This is supported by trough‐parallel clouds, whose formation has been attributed to hydraulic jumps. We present a cloud atlas across the Martian north pole using ∼13,800 THEMIS images spanning ∼18 Earth years. We find trough‐parallel clouds in ∼400 images, with regions nearer to the pole having higher cloud frequency. We compare spiral trough geometry to our cloud atlas and find regions with trough‐parallel clouds often correlate with metrics associated with modern‐day sublimation‐deposition cycles (i.e., relief and asymmetry), but not always. In some regions, troughs with morphologies conducive to cloud formation have no clouds. Overall, trough geometry varies greatly across the deposits, both within and between troughs, suggesting localized differences in deposition relative to migration, varying katabatic wind intensities, differing past climatic states influencing the troughs, varying trough initiation properties, or the possibility of additional mechanisms for trough initiation and migration (e.g., in situ trough erosion). Understanding what controls trough shape variability across the NPLD and how these controls change through time and space is key when interpreting Martian paleoclimate.
- 18 February 2024
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Planets
- Vol. 129 (2)
Investigating the Linkage Between Spiral Trough Morphology and Cloud Coverage on the Martian North Polar Layered Deposits
The martian North Polar layered deposits (NPLD) are composed of alternating water‐ice and dust‐rich layers resulting from atmospheric deposition and are key to understanding Mars climate cycles. Within these deposits are spiral troughs whose migration affects deposition signals. To understand the relationship between NPLD stratigraphy and Martian climate, we must identify modern‐day drivers of NPLD ice migration. Prevailing theory posits migration driven by upstream‐migrating bed undulations bounded by hydraulic jumps, caused by katabatic winds flowing over trough walls with asymmetric cross‐sectional relief. This is supported by trough‐parallel clouds, whose formation has been attributed to hydraulic jumps. We present a cloud atlas across the Martian north pole using ∼13,800 THEMIS images spanning ∼18 Earth years. We find trough‐parallel clouds in ∼400 images, with regions nearer to the pole having higher cloud frequency. We compare spiral trough geometry to our cloud atlas and find regions with trough‐parallel clouds often correlate with metrics associated with modern‐day sublimation‐deposition cycles (i.e., relief and asymmetry), but not always. In some regions, troughs with morphologies conducive to cloud formation have no clouds. Overall, trough geometry varies greatly across the deposits, both within and between troughs, suggesting localized differences in deposition relative to migration, varying katabatic wind intensities, differing past climatic states influencing the troughs, varying trough initiation properties, or the possibility of additional mechanisms for trough initiation and migration (e.g., in situ trough erosion). Understanding what controls trough shape variability across the NPLD and how these controls change through time and space is key when interpreting Martian paleoclimate.
- Open Access
- 10 February 2024
- Published by Wiley
Investigating the Linkage Between Spiral Trough Morphology and Cloud Coverage on the Martian North Polar Layered Deposits
The Martian North Polar Layered Deposits (NPLD) are composed of alternating water-ice and dust-rich layers resulting from atmospheric deposition and are key to understanding Mars’ climate cycles. Within these deposits are spiral troughs, whose migration affects deposition signals. To understand the relationship between NPLD stratigraphy and Martian climate, we must identify modern-day drivers of NPLD ice migration. Prevailing theory posits migration driven by upstream-migrating bed undulations bounded by hydraulic jumps, caused by katabatic winds flowing over trough walls with asymmetric cross-sectional relief. This is supported by trough-parallel clouds, whose formation has been attributed to hydraulic jumps. We present a cloud atlas across the Martian north pole using ~13,800 THEMIS images spanning ~18 Earth years. We find trough-parallel clouds in ~400 images, with regions nearer to the pole having higher cloud frequency. We compare spiral trough geometry to our cloud atlas and find regions with trough-parallel clouds often correlate with metrics associated with modern-day sublimation-deposition cycles (i.e., relief and asymmetry), but not always. In some regions, troughs with morphologies conducive to cloud formation have no clouds. Overall, trough geometry varies greatly across the deposits, both within and between troughs, suggesting localized differences in deposition relative to migration, varying katabatic wind intensities, differing past climatic states influencing the troughs, varying trough initiation properties, or the possibility of additional mechanisms for trough initiation and migration (e.g., in-situ trough erosion). Understanding what controls trough shape variability across the NPLD and how these controls change through time and space is key when interpreting Martian paleoclimate. Abstract content goes here
- 10 February 2024
- Published by Wiley
Open AccessInvestigating the Linkage Between Spiral Trough Morphology and Cloud Coverage on the Martian North Polar Layered Deposits
The Martian North Polar Layered Deposits (NPLD) are composed of alternating water-ice and dust-rich layers resulting from atmospheric deposition and are key to understanding Mars’ climate cycles. Within these deposits are spiral troughs, whose migration affects deposition signals. To understand the relationship between NPLD stratigraphy and Martian climate, we must identify modern-day drivers of NPLD ice migration. Prevailing theory posits migration driven by upstream-migrating bed undulations bounded by hydraulic jumps, caused by katabatic winds flowing over trough walls with asymmetric cross-sectional relief. This is supported by trough-parallel clouds, whose formation has been attributed to hydraulic jumps. We present a cloud atlas across the Martian north pole using ~13,800 THEMIS images spanning ~18 Earth years. We find trough-parallel clouds in ~400 images, with regions nearer to the pole having higher cloud frequency. We compare spiral trough geometry to our cloud atlas and find regions with trough-parallel clouds often correlate with metrics associated with modern-day sublimation-deposition cycles (i.e., relief and asymmetry), but not always. In some regions, troughs with morphologies conducive to cloud formation have no clouds. Overall, trough geometry varies greatly across the deposits, both within and between troughs, suggesting localized differences in deposition relative to migration, varying katabatic wind intensities, differing past climatic states influencing the troughs, varying trough initiation properties, or the possibility of additional mechanisms for trough initiation and migration (e.g., in-situ trough erosion). Understanding what controls trough shape variability across the NPLD and how these controls change through time and space is key when interpreting Martian paleoclimate. Abstract content goes here
- Open Access
- 4 January 2024
- Published by Cambridge University Press (CUP) in Journal of Glaciology
- Vol. 70, 1-7
Performance characterization of a new, low-cost multi-GNSS instrument for the cryosphere
We developed a multi-frequency, multi-Global Navigation Satellite System (GNSS) positioning instrument optimized for autonomous applications in the cryosphere. At lower power requirements and a fraction of the cost and weight compared to commercially available options, this instrument simplifies field usage and associated logistics. In this paper, we assess several baseline aspects of performance in a polar environment relative to geodetic receivers commonly used for glaciological applications. Evaluations of precision and relative accuracy of positioning show millimeter to centimeter-level (‘geodetic-grade’) quality of this instrument, making it a competitive alternative for GNSS glaciological and geophysical applications such as monitoring surface elevation change and ice flow. An array of these instruments, tested in the field on the Greenland Ice Sheet, also demonstrated robustness throughout the polar winter and met power and reliability requirements.
- 4 January 2024
- Published by Cambridge University Press (CUP) in Journal of Glaciology
- Vol. 70, 1-7
Open AccessPerformance characterization of a new, low-cost multi-GNSS instrument for the cryosphere
We developed a multi-frequency, multi-Global Navigation Satellite System (GNSS) positioning instrument optimized for autonomous applications in the cryosphere. At lower power requirements and a fraction of the cost and weight compared to commercially available options, this instrument simplifies field usage and associated logistics. In this paper, we assess several baseline aspects of performance in a polar environment relative to geodetic receivers commonly used for glaciological applications. Evaluations of precision and relative accuracy of positioning show millimeter to centimeter-level (‘geodetic-grade’) quality of this instrument, making it a competitive alternative for GNSS glaciological and geophysical applications such as monitoring surface elevation change and ice flow. An array of these instruments, tested in the field on the Greenland Ice Sheet, also demonstrated robustness throughout the polar winter and met power and reliability requirements.
- 6 February 2023
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Earth Surface
- Vol. 128 (2)
Firn Core Evidence of Two‐Way Feedback Mechanisms Between Meltwater Infiltration and Firn Microstructure From the Western Percolation Zone of the Greenland Ice Sheet
The relationship between firn microstructure and water movement is complex: firn microstructure controls the routing of meltwater through the firn while continuously being altered by liquid water flow processes. Importantly, microstructural transitions within the firn column can stall vertical meltwater percolation, which creates heterogeneities in liquid water content resulting in different rates of firn metamorphism. Physics‐based firn models aim to describe these processes to accurately predict ice layer or firn aquifer formation, but require detailed observations of firn structure to validate and inform percolation schemes. Here, we present grain size measurements and ice layer stratigraphy from seven firn cores collected in western Greenland's percolation zone during the 2016 Greenland Traverse for Accumulation and Climate Studies (GreenTrACS). Grain size transitions within the cores are negatively correlated with all temperature proxies for meltwater supply. Additionally, the number of grain size transitions are strongly anticorrelated with the number of ice layers within each core, despite these transitions, particularly fine‐over‐coarse transitions, promoting meltwater ponding and potential ice layer formation. To investigate if these negative correlations can be understood with firn model physics, we simulate water movement along stratigraphic transitions using the SNOWPACK model. We find that grain size transitions diminish from rapid grain growth in wet firn where ice layers can form, suggesting these microstructural transitions are unlikely to survive repeated meltwater infiltration. Incorporating these microstructure—meltwater feedbacks in firn models could improve their ability to model processes such as ice slab formation or firn aquifer recharge that require accurate predictions of meltwater infiltration depth.
- 6 February 2023
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Earth Surface
- Vol. 128 (2)
Firn Core Evidence of Two‐Way Feedback Mechanisms Between Meltwater Infiltration and Firn Microstructure From the Western Percolation Zone of the Greenland Ice Sheet
The relationship between firn microstructure and water movement is complex: firn microstructure controls the routing of meltwater through the firn while continuously being altered by liquid water flow processes. Importantly, microstructural transitions within the firn column can stall vertical meltwater percolation, which creates heterogeneities in liquid water content resulting in different rates of firn metamorphism. Physics‐based firn models aim to describe these processes to accurately predict ice layer or firn aquifer formation, but require detailed observations of firn structure to validate and inform percolation schemes. Here, we present grain size measurements and ice layer stratigraphy from seven firn cores collected in western Greenland's percolation zone during the 2016 Greenland Traverse for Accumulation and Climate Studies (GreenTrACS). Grain size transitions within the cores are negatively correlated with all temperature proxies for meltwater supply. Additionally, the number of grain size transitions are strongly anticorrelated with the number of ice layers within each core, despite these transitions, particularly fine‐over‐coarse transitions, promoting meltwater ponding and potential ice layer formation. To investigate if these negative correlations can be understood with firn model physics, we simulate water movement along stratigraphic transitions using the SNOWPACK model. We find that grain size transitions diminish from rapid grain growth in wet firn where ice layers can form, suggesting these microstructural transitions are unlikely to survive repeated meltwater infiltration. Incorporating these microstructure—meltwater feedbacks in firn models could improve their ability to model processes such as ice slab formation or firn aquifer recharge that require accurate predictions of meltwater infiltration depth.
- Open Access
- 1 December 2022
- Published by Wiley in ESS Open Archive
A Cost-Efficient, Highly Modifiable Borehole Tilt Sensor for Borehole Geophysical Studies
We present a cost-efficient tilt sensor that was originally developed by our team at Dartmouth College to study ice deformation as part of the Jarvis Glacier Project, and we showcase our successful initial run that includes the development, deployment, and data collection processes. In this case study, we installed our tilt sensor system in two boreholes drilled close to the lateral shear margin of Jarvis Glacier in Alaska and successfully collected over 16 months of uninterrupted borehole deformation data in a harsh polythermal glacial environment. The data included gravity and magnetic data that we used to track the orientation of our sensors in the boreholes over time, and the resultant kinematic measurements enabled us to compute borehole deformation. While our sensors were applied under polythermal thermal regime conditions, we present use cases for our sensors in a variety of glacier thermal regimes including Athabasca glacier, a temperate glacier in Canada, and in Antarctic regions with similar polythermal regimes such as ice streams and outlet glaciers. Sensors embedded in our tilt sensors can be modified to suit different needs, and the tilt sensor can also be modified for different boreholes and glacier conditions. Our goal is to improve the accessibility of borehole geophysics research mainly through supporting production efforts of our sensor for various research needs. With an established sensor development plan, successful applications in the field, and years of experience, our team is open to potential research collaborations with researchers who are interested in using our tilt sensors. Our team is working with Polar Research Equipment, a Dartmouth alumni founded company that specializes in the development of polar research tools, that will serve as a commercial resource for researchers who may require support during the development process or mass-production of our cost-efficient (~20% the price of other commercial versions) yet effective tilt sensors.
- 1 December 2022
- Published by Wiley in ESS Open Archive
Open AccessA Cost-Efficient, Highly Modifiable Borehole Tilt Sensor for Borehole Geophysical Studies
We present a cost-efficient tilt sensor that was originally developed by our team at Dartmouth College to study ice deformation as part of the Jarvis Glacier Project, and we showcase our successful initial run that includes the development, deployment, and data collection processes. In this case study, we installed our tilt sensor system in two boreholes drilled close to the lateral shear margin of Jarvis Glacier in Alaska and successfully collected over 16 months of uninterrupted borehole deformation data in a harsh polythermal glacial environment. The data included gravity and magnetic data that we used to track the orientation of our sensors in the boreholes over time, and the resultant kinematic measurements enabled us to compute borehole deformation. While our sensors were applied under polythermal thermal regime conditions, we present use cases for our sensors in a variety of glacier thermal regimes including Athabasca glacier, a temperate glacier in Canada, and in Antarctic regions with similar polythermal regimes such as ice streams and outlet glaciers. Sensors embedded in our tilt sensors can be modified to suit different needs, and the tilt sensor can also be modified for different boreholes and glacier conditions. Our goal is to improve the accessibility of borehole geophysics research mainly through supporting production efforts of our sensor for various research needs. With an established sensor development plan, successful applications in the field, and years of experience, our team is open to potential research collaborations with researchers who are interested in using our tilt sensors. Our team is working with Polar Research Equipment, a Dartmouth alumni founded company that specializes in the development of polar research tools, that will serve as a commercial resource for researchers who may require support during the development process or mass-production of our cost-efficient (~20% the price of other commercial versions) yet effective tilt sensors.
- Open Access
- 21 October 2022
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Earth Surface
- Vol. 127 (10)
Declining Basal Motion Dominates the Long‐Term Slowing of Athabasca Glacier, Canada
Globally, glaciers are shrinking in response to climate change, with implications for global sea level rise as well as downstream ecosystems and water resources. Sliding at the ice‐bed interface (basal motion) provides a mechanism for glaciers to respond rapidly to climate change. While the short‐term dynamics of glacier basal motion (50 year) timescales—this knowledge is required for accurate prediction of future glacier change. We compare historical data with modern estimates from field and satellite data at Athabasca Glacier and show that the glacier thinned by 60 m (−21%) over 1961–2020. However, a concurrent increase in surface slope results in minimal change in the average driving stress (−6 kPa and −4%). These geometric changes coincide with relatively uniform slowing (−15 m a−1 and −45%). Simplified ice modeling suggests that declining basal motion accounts for most of this slow down (91% on average and 46% at minimum). A decline in basal motion can be explained by increasing basal friction resulting from geometric change in addition to increasing meltwater flux through a more efficient subglacial hydrologic system. These results highlight the need to include time‐varying dynamics of basal motion in glacier models and analyses. If these findings are generalizable, they suggest that declining basal motion reduces the flux of ice to lower elevations, helping to mitigate glacier mass loss in a warming climate.
- 21 October 2022
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Earth Surface
- Vol. 127 (10)
Open AccessDeclining Basal Motion Dominates the Long‐Term Slowing of Athabasca Glacier, Canada
Globally, glaciers are shrinking in response to climate change, with implications for global sea level rise as well as downstream ecosystems and water resources. Sliding at the ice‐bed interface (basal motion) provides a mechanism for glaciers to respond rapidly to climate change. While the short‐term dynamics of glacier basal motion (50 year) timescales—this knowledge is required for accurate prediction of future glacier change. We compare historical data with modern estimates from field and satellite data at Athabasca Glacier and show that the glacier thinned by 60 m (−21%) over 1961–2020. However, a concurrent increase in surface slope results in minimal change in the average driving stress (−6 kPa and −4%). These geometric changes coincide with relatively uniform slowing (−15 m a−1 and −45%). Simplified ice modeling suggests that declining basal motion accounts for most of this slow down (91% on average and 46% at minimum). A decline in basal motion can be explained by increasing basal friction resulting from geometric change in addition to increasing meltwater flux through a more efficient subglacial hydrologic system. These results highlight the need to include time‐varying dynamics of basal motion in glacier models and analyses. If these findings are generalizable, they suggest that declining basal motion reduces the flux of ice to lower elevations, helping to mitigate glacier mass loss in a warming climate.
- Open Access
- 22 June 2021
- Published by Cambridge University Press (CUP) in Journal of Glaciology
- Vol. 67 (266) , 1108-1120
Detecting supraglacial debris thickness with GPR under suboptimal conditions
The thickness of a supraglacial layer is critical to the magnitude and time frame of glacier melt. Field-based, short pulse, ground-penetrating radar (GPR) has successfully measured debris thickness during a glacier's melt season, when there is a strong return from the ice–debris interface, but profiling with GPR in the absence of a highly reflective ice interface has not been explored. We investigated the performance of 960 MHz signals over 2 km of transects on Changri Nup Glacier, Nepal, during the post-monsoon. We also performed laboratory experiments to interpret the field data and investigate electromagnetic wave propagation into dry rocky debris. Laboratory tests confirmed wave penetration into the glacier ice and suggest that the ice–debris interface return was missing in field data because of a weak dielectric contrast between solid ice and porous dry debris. We developed a new method to estimate debris thicknesses by applying a statistical approach to volumetric backscatter, and our backscatter-based calculated thickness retrievals gave reasonable agreement with debris depths measured manually in the field (10–40 cm). We conclude that, when melt season profiling is not an option, a remote system near 1 GHz could allow dry debris thickness to be estimated based on volumetric backscatter.
- 22 June 2021
- Published by Cambridge University Press (CUP) in Journal of Glaciology
- Vol. 67 (266) , 1108-1120
Open AccessDetecting supraglacial debris thickness with GPR under suboptimal conditions
The thickness of a supraglacial layer is critical to the magnitude and time frame of glacier melt. Field-based, short pulse, ground-penetrating radar (GPR) has successfully measured debris thickness during a glacier's melt season, when there is a strong return from the ice–debris interface, but profiling with GPR in the absence of a highly reflective ice interface has not been explored. We investigated the performance of 960 MHz signals over 2 km of transects on Changri Nup Glacier, Nepal, during the post-monsoon. We also performed laboratory experiments to interpret the field data and investigate electromagnetic wave propagation into dry rocky debris. Laboratory tests confirmed wave penetration into the glacier ice and suggest that the ice–debris interface return was missing in field data because of a weak dielectric contrast between solid ice and porous dry debris. We developed a new method to estimate debris thicknesses by applying a statistical approach to volumetric backscatter, and our backscatter-based calculated thickness retrievals gave reasonable agreement with debris depths measured manually in the field (10–40 cm). We conclude that, when melt season profiling is not an option, a remote system near 1 GHz could allow dry debris thickness to be estimated based on volumetric backscatter.
- Open Access
- 11 June 2021
- Published by Cambridge University Press (CUP) in Journal of Glaciology
- Vol. 67 (266) , 1163-1176
Microstructures in a shear margin: Jarvis Glacier, Alaska
Microstructures, including crystallographic fabric, within the margin of streaming ice can exert strong control on flow dynamics. To characterize a natural setting, we retrieved three cores, two of which reached bed, from the flank of Jarvis Glacier, eastern Alaska Range, Alaska. The core sites lie ~1 km downstream of the source, with abundant water present in the extracted cores and at the base of the glacier. All cores exhibit dipping layers, a combination of debris bands and bubble-free domains. Grain sizes coarsen on average approaching the lateral margin. Crystallographic orientations are more clustered and withc-axes closer to horizontal nearer the lateral margin. The measured fabric is sufficiently weak to induce little mechanical anisotropy, but the data suggest that despite the challenging conditions of warm ice, abundant water and a short flow distance, many aspects of the microstructure, including measurable crystallographic fabric, evolved in systematic ways.
- 11 June 2021
- Published by Cambridge University Press (CUP) in Journal of Glaciology
- Vol. 67 (266) , 1163-1176
Open AccessMicrostructures in a shear margin: Jarvis Glacier, Alaska
Microstructures, including crystallographic fabric, within the margin of streaming ice can exert strong control on flow dynamics. To characterize a natural setting, we retrieved three cores, two of which reached bed, from the flank of Jarvis Glacier, eastern Alaska Range, Alaska. The core sites lie ~1 km downstream of the source, with abundant water present in the extracted cores and at the base of the glacier. All cores exhibit dipping layers, a combination of debris bands and bubble-free domains. Grain sizes coarsen on average approaching the lateral margin. Crystallographic orientations are more clustered and withc-axes closer to horizontal nearer the lateral margin. The measured fabric is sufficiently weak to induce little mechanical anisotropy, but the data suggest that despite the challenging conditions of warm ice, abundant water and a short flow distance, many aspects of the microstructure, including measurable crystallographic fabric, evolved in systematic ways.
- Open Access
- 17 May 2021
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 48 (10)
Atmospheric Blocking Drives Recent Albedo Change Across the Western Greenland Ice Sheet Percolation Zone
Greenland Ice Sheet (GrIS) albedo has decreased over recent decades, contributing to enhanced surface melt and mass loss. However, it remains unclear whether GrIS darkening is due to snow grain size increases, higher concentrations of light‐absorbing impurities (LAIs), or a combination. Here, we assess albedo controls in the western GrIS percolation zone using in situ albedo, LAI, and grain size measurements. We find a significant correlation between albedo and snow grain size (p < 0.01), but not with LAIs. Modeling corroborates that LAI concentrations are too low to significantly reduce albedo, but larger grain sizes could reduce albedo by at least ∼3%. Strong atmospheric blocking increases grain sizes and reduces albedo through increased surface temperature, fewer storms, and higher incoming shortwave radiation. These findings clarify the mechanisms by which anomalously strong blocking contributed to recent GrIS albedo decline and mass loss, highlighting the importance of improving projections of future blocking.
- 17 May 2021
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 48 (10)
Open AccessAtmospheric Blocking Drives Recent Albedo Change Across the Western Greenland Ice Sheet Percolation Zone
Greenland Ice Sheet (GrIS) albedo has decreased over recent decades, contributing to enhanced surface melt and mass loss. However, it remains unclear whether GrIS darkening is due to snow grain size increases, higher concentrations of light‐absorbing impurities (LAIs), or a combination. Here, we assess albedo controls in the western GrIS percolation zone using in situ albedo, LAI, and grain size measurements. We find a significant correlation between albedo and snow grain size (p < 0.01), but not with LAIs. Modeling corroborates that LAI concentrations are too low to significantly reduce albedo, but larger grain sizes could reduce albedo by at least ∼3%. Strong atmospheric blocking increases grain sizes and reduces albedo through increased surface temperature, fewer storms, and higher incoming shortwave radiation. These findings clarify the mechanisms by which anomalously strong blocking contributed to recent GrIS albedo decline and mass loss, highlighting the importance of improving projections of future blocking.
- Open Access
- 14 December 2020
- Published by Cambridge University Press (CUP) in Journal of Glaciology
- Vol. 67 (262) , 219-228
Reconstruction of historical surface mass balance, 1984–2017 from GreenTrACS multi-offset ground-penetrating radar
We present continuous estimates of snow and firn density, layer depth and accumulation from a multi-channel, multi-offset, ground-penetrating radar traverse. Our method uses the electromagnetic velocity, estimated from waveform travel-times measured at common-midpoints between sources and receivers. Previously, common-midpoint radar experiments on ice sheets have been limited to point observations. We completed radar velocity analysis in the upper ~2 m to estimate the surface and average snow density of the Greenland Ice Sheet. We parameterized the Herron and Langway (1980) firn density and age model using the radar-derived snow density, radar-derived surface mass balance (2015–2017) and reanalysis-derived temperature data. We applied structure-oriented filtering to the radar image along constant age horizons and increased the depth at which horizons could be reliably interpreted. We reconstructed the historical instantaneous surface mass balance, which we averaged into annual and multidecadal products along a 78 km traverse for the period 1984–2017. We found good agreement between our physically constrained parameterization and a firn core collected from the dry snow accumulation zone, and gained insights into the spatial correlation of surface snow density.
- 14 December 2020
- Published by Cambridge University Press (CUP) in Journal of Glaciology
- Vol. 67 (262) , 219-228
Open AccessReconstruction of historical surface mass balance, 1984–2017 from GreenTrACS multi-offset ground-penetrating radar
We present continuous estimates of snow and firn density, layer depth and accumulation from a multi-channel, multi-offset, ground-penetrating radar traverse. Our method uses the electromagnetic velocity, estimated from waveform travel-times measured at common-midpoints between sources and receivers. Previously, common-midpoint radar experiments on ice sheets have been limited to point observations. We completed radar velocity analysis in the upper ~2 m to estimate the surface and average snow density of the Greenland Ice Sheet. We parameterized the Herron and Langway (1980) firn density and age model using the radar-derived snow density, radar-derived surface mass balance (2015–2017) and reanalysis-derived temperature data. We applied structure-oriented filtering to the radar image along constant age horizons and increased the depth at which horizons could be reliably interpreted. We reconstructed the historical instantaneous surface mass balance, which we averaged into annual and multidecadal products along a 78 km traverse for the period 1984–2017. We found good agreement between our physically constrained parameterization and a firn core collected from the dry snow accumulation zone, and gained insights into the spatial correlation of surface snow density.