Sahng-Kyoon Jerng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sahng-Kyoon Jerng has a total of 79 co-authors. Here are the top co-authors by number of shared publications:
- Seung-Hyun Chun
Department of Physics and Astronomy, Sejong University, Seoul 05006, Republic of Korea
17 shared publications Jae Ho Jeon
Department of Physics Sejong University Seoul 05006 South Korea
10 shared publicationsSanjib Baran Roy
Department of Physics, Sejong University, Seoul 05006, Korea
6 shared publicationsEuijoon Yoon
Energy Semiconductor Research Center, Advanced Institutes of Convergence Technology, Seoul National University, Suwon 443-270, Korea
5 shared publicationsKamran Akbar
Department of Energy Science, Sungkyunkwan University, Suwon 16419, Korea
5 shared publicationsKisu Joo
Department of Nano Science and Technology, Graduate School of Convergence Science and Technology, Seoul National University, Suwon 443-270, Korea
5 shared publications
Latest Publications
- Open Access
- 15 August 2024
- Published by Wiley in Advanced Science
- Vol. 11 (39) , e2403721
Integration of Vertical Graphene Onto a Tunnelling Cathode for Digital X‐Ray Imaging
As an alternative to thermionic X‐ray generators, cold‐cathode X‐ray tubes are being developed for portable and multichannel tomography. Field emission propagating from needle structures such as carbon nanotubes or Si tips currently dominates related research and development, but various obstacles prevent the widespread of this technology. An old but simple electron emission design is the planar tunnelling cathode using a metal–oxide–semiconductor (MOS) structure, which achieves narrow beam dispersion and low supplying voltage. Directly grown vertical graphene (VG) is employed as the gate electrode of MOS and tests its potential as a new emission source. The emission efficiency of the device is initially ≈1% because of unavoidable fabrication damage during the patterning processes; it drastically improves to >40% after ozone treatment. The resulting emission current obeys the Fowler–Nordheim tunnelling model, and the enhanced emission is attributed to the effective gate thickness reduction by ozone treatment. As a proof‐of‐concept experiment, a clustered array of 2140 cells is integrated into a system that provides mA‐class emission current for X‐ray generation. With pulsed digital excitations, X‐ray imaging of a chest phantom, demonstrating the feasibility of using a VG MOS electron emission source as a new and innovative X‐ray generator is realized.
- 15 August 2024
- Published by Wiley in Advanced Science
- Vol. 11 (39) , e2403721
Open AccessIntegration of Vertical Graphene Onto a Tunnelling Cathode for Digital X‐Ray Imaging
As an alternative to thermionic X‐ray generators, cold‐cathode X‐ray tubes are being developed for portable and multichannel tomography. Field emission propagating from needle structures such as carbon nanotubes or Si tips currently dominates related research and development, but various obstacles prevent the widespread of this technology. An old but simple electron emission design is the planar tunnelling cathode using a metal–oxide–semiconductor (MOS) structure, which achieves narrow beam dispersion and low supplying voltage. Directly grown vertical graphene (VG) is employed as the gate electrode of MOS and tests its potential as a new emission source. The emission efficiency of the device is initially ≈1% because of unavoidable fabrication damage during the patterning processes; it drastically improves to >40% after ozone treatment. The resulting emission current obeys the Fowler–Nordheim tunnelling model, and the enhanced emission is attributed to the effective gate thickness reduction by ozone treatment. As a proof‐of‐concept experiment, a clustered array of 2140 cells is integrated into a system that provides mA‐class emission current for X‐ray generation. With pulsed digital excitations, X‐ray imaging of a chest phantom, demonstrating the feasibility of using a VG MOS electron emission source as a new and innovative X‐ray generator is realized.
- Open Access
- 22 September 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 11 (40) , 13981-13990
Gate-tunable rectification and photoresponse in a MoTe2/SnS2 van der Waals heterostructure based P–N diode
The p–n junction, one of the prominent electrical components capable of being utilized in electronics and optoelectronics, has attracted renewed interest due to recent research in two-dimensional (2D) materials. In this work, we constructed a heterostructure p–n diode based on MoTe2 and SnS2. Sweeping the back-gate voltage (Vbg) effectively results in a high rectification ratio of 2.79 × 105 at Vbg = +10 V and the lowest ideality factor (η) of about 1.25 was achievedwhen Vbg = −30 V. The interlayer electron–hole recombination is responsible for the variation in rectification behavior. This photodiode exhibits effective photodetection capabilities and promising merit statistics. The maximum change in photocurrent (Iph) is measured to be about 90 nA at Vds = 0.9 V, and the device exhibited a high responsivity (R) of 5.8 × 104 mA W−1, while the maximum external quantum efficiency (EQE) and detectivity are calculated to be about 3.27 × 104 (%) and 2.47 × 1010 Jones for the device, respectively, when illuminated with 220 nm wavelength incident light at a power intensity of 11 mW cm−2. The average rise/fall times for the 220 nm wavelength at Vds = 0.9 V are observed to be 0.29 s/0.38 s, respectively. We examined the photoresponse of the device as a function of time at different wavelengths (λ = 970–220 nm) of the incident light and at different power intensities (P = 11–44 mW cm−2) of the incident light. The maximum values of Voc = 0.32 V and Isc = −0.40 nA were achieved at P = 44 mW cm−2. The p-MoTe2/n-SnS2-based device has excellent rectifying and optoelectronic properties.
- 22 September 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 11 (40) , 13981-13990
Open AccessGate-tunable rectification and photoresponse in a MoTe2/SnS2 van der Waals heterostructure based P–N diode
The p–n junction, one of the prominent electrical components capable of being utilized in electronics and optoelectronics, has attracted renewed interest due to recent research in two-dimensional (2D) materials. In this work, we constructed a heterostructure p–n diode based on MoTe2 and SnS2. Sweeping the back-gate voltage (Vbg) effectively results in a high rectification ratio of 2.79 × 105 at Vbg = +10 V and the lowest ideality factor (η) of about 1.25 was achievedwhen Vbg = −30 V. The interlayer electron–hole recombination is responsible for the variation in rectification behavior. This photodiode exhibits effective photodetection capabilities and promising merit statistics. The maximum change in photocurrent (Iph) is measured to be about 90 nA at Vds = 0.9 V, and the device exhibited a high responsivity (R) of 5.8 × 104 mA W−1, while the maximum external quantum efficiency (EQE) and detectivity are calculated to be about 3.27 × 104 (%) and 2.47 × 1010 Jones for the device, respectively, when illuminated with 220 nm wavelength incident light at a power intensity of 11 mW cm−2. The average rise/fall times for the 220 nm wavelength at Vds = 0.9 V are observed to be 0.29 s/0.38 s, respectively. We examined the photoresponse of the device as a function of time at different wavelengths (λ = 970–220 nm) of the incident light and at different power intensities (P = 11–44 mW cm−2) of the incident light. The maximum values of Voc = 0.32 V and Isc = −0.40 nA were achieved at P = 44 mW cm−2. The p-MoTe2/n-SnS2-based device has excellent rectifying and optoelectronic properties.
- 27 May 2022
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 16 (6) , 8974-8982
Emergent Topological Hall Effect from Exchange Coupling in Ferromagnetic Cr2Te3/Noncoplanar Antiferromagnetic Cr2Se3 Bilayers
The topological Hall effect has been observed in magnetic materials of complex spin structures or bilayers of trivial magnets and strong spin-orbit-coupled systems. In view of current attention on dissipationless topological electronics, the occurrence of the topological Hall effect in new systems or by an unexpected mechanism is fascinating. Here, we report a robust topological Hall effect generated in bilayers of a ferromagnet and a noncoplanar antiferromagnet, from the interfacial Dzyaloshinskii-Moriya interaction due to the exchange coupling of magnetic layers. Molecular beam epitaxy has been utilized to fabricate heterostructures of a ferromagnetic metal Cr2Te3 and a noncoplanar antiferromagnet Cr2Se3. A significant topological Hall effect at low temperature implies the development of nontrivial spin chirality, and density functional theory calculations explain the correlation of the Dzyaloshinskii-Moriya interaction increase and inversion symmetry breaking at the interface. The presence of noncoplanar ordering in the antiferromagnet plays a pivotal role in producing the topological Hall effect. Our results suggest that the exchange coupling in ferromagnet/noncoplanar antiferromagnet bilayers could be an alternative mechanism toward topologically protected magnetic structures.
- 27 May 2022
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 16 (6) , 8974-8982
Emergent Topological Hall Effect from Exchange Coupling in Ferromagnetic Cr2Te3/Noncoplanar Antiferromagnetic Cr2Se3 Bilayers
The topological Hall effect has been observed in magnetic materials of complex spin structures or bilayers of trivial magnets and strong spin-orbit-coupled systems. In view of current attention on dissipationless topological electronics, the occurrence of the topological Hall effect in new systems or by an unexpected mechanism is fascinating. Here, we report a robust topological Hall effect generated in bilayers of a ferromagnet and a noncoplanar antiferromagnet, from the interfacial Dzyaloshinskii-Moriya interaction due to the exchange coupling of magnetic layers. Molecular beam epitaxy has been utilized to fabricate heterostructures of a ferromagnetic metal Cr2Te3 and a noncoplanar antiferromagnet Cr2Se3. A significant topological Hall effect at low temperature implies the development of nontrivial spin chirality, and density functional theory calculations explain the correlation of the Dzyaloshinskii-Moriya interaction increase and inversion symmetry breaking at the interface. The presence of noncoplanar ordering in the antiferromagnet plays a pivotal role in producing the topological Hall effect. Our results suggest that the exchange coupling in ferromagnet/noncoplanar antiferromagnet bilayers could be an alternative mechanism toward topologically protected magnetic structures.
- 8 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
Determination of the Terahertz Dielectric Function of the Topological Insulator Bi2Se3
We investigate the THz conductivity of the topological insulator Bi 2 Se 3 , in a systematic study involving samples of different thicknesses. In our analysis we compare the fits of experimental data to two suggested models, describing the electron and phonon contributions: Drude with Fano-modified Lorentzian resonance, and Drude with a two-Lorentzian resonance. Analysis of the fit accuracy suggests that the asymmetric shape of the lattice resonance in Bi 2 Se 3 might arise from the presence of a surface vibrational state, rather than from the electron-phonon Fano interference, as was previously suggested.
- 8 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
Determination of the Terahertz Dielectric Function of the Topological Insulator Bi2Se3
We investigate the THz conductivity of the topological insulator Bi 2 Se 3 , in a systematic study involving samples of different thicknesses. In our analysis we compare the fits of experimental data to two suggested models, describing the electron and phonon contributions: Drude with Fano-modified Lorentzian resonance, and Drude with a two-Lorentzian resonance. Analysis of the fit accuracy suggests that the asymmetric shape of the lattice resonance in Bi 2 Se 3 might arise from the presence of a surface vibrational state, rather than from the electron-phonon Fano interference, as was previously suggested.
- Open Access
- 31 March 2020
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 10 (22) , 13016-13020
Facile electrodeposition of V-doped CoP on vertical graphene for efficient alkaline water electrolysis
In this work, we demonstrate a highly enhanced electrocatalytic activity of vanadium-doped CoP (V–CoP), directly grafted on a vertical graphene/carbon cloth electrode (VG/CC) by a facile electrochemical deposition method. Impressively, V–CoP/VG/CC exhibited a superior catalytic activity toward the hydrogen evolution reaction (HER) in alkaline solution. Compared to CoP/VG/CC, V-doping decreased the overpotential for HER at 10 mA cm−2 by more than half to 40 mV. The new catalyst even outperformed Pt/C beyond 150 mA cm−2. The overpotential for OER at 50 mA cm−2 was merely 314 mV, more than 100 mV lower than that of IrO2. Moreover, our novel catalyst worked as an excellent bifunctional catalyst with a low cell voltage of 1.69 V to achieve a current density of 50 mA cm−2. Detailed characterizations revealed that the V-doping in CoP resulted in improved electrical conductivity and increased active sites. Our findings highlight the significant advantage of V doping on the catalytic activities of CoP, already boosted by VG. Furthermore, concurrent doping with the electrodeposition of catalyst offers a new approach for practical water electrolysis.
- 31 March 2020
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 10 (22) , 13016-13020
Open AccessFacile electrodeposition of V-doped CoP on vertical graphene for efficient alkaline water electrolysis
In this work, we demonstrate a highly enhanced electrocatalytic activity of vanadium-doped CoP (V–CoP), directly grafted on a vertical graphene/carbon cloth electrode (VG/CC) by a facile electrochemical deposition method. Impressively, V–CoP/VG/CC exhibited a superior catalytic activity toward the hydrogen evolution reaction (HER) in alkaline solution. Compared to CoP/VG/CC, V-doping decreased the overpotential for HER at 10 mA cm−2 by more than half to 40 mV. The new catalyst even outperformed Pt/C beyond 150 mA cm−2. The overpotential for OER at 50 mA cm−2 was merely 314 mV, more than 100 mV lower than that of IrO2. Moreover, our novel catalyst worked as an excellent bifunctional catalyst with a low cell voltage of 1.69 V to achieve a current density of 50 mA cm−2. Detailed characterizations revealed that the V-doping in CoP resulted in improved electrical conductivity and increased active sites. Our findings highlight the significant advantage of V doping on the catalytic activities of CoP, already boosted by VG. Furthermore, concurrent doping with the electrodeposition of catalyst offers a new approach for practical water electrolysis.
- 28 August 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (36) , 20590-20596
Iridium on vertical graphene as an all-round catalyst for robust water splitting reactions
Among all noble metals, Ir has become popular for water reduction/oxidation due to its stability in both acidic and alkaline electrolytes. We find that Ir on vertical graphene (Ir_VG) is an all-round bi-functional catalyst. A high content of metallic Ir (Ir0) manifests as active catalytic sites supported by a superaerophobic vertical graphene surface designed to facilitate two-/four-electron transfer processes. This binder-free, nanoscale hybrid catalyst yields low overpotentials for the HER and OER in both acidic and alkaline media. With a minimal catalyst loading of 50 μg cm−2 for the HER, the catalyst delivers a current density of 10 mA cm−2 at overpotentials of 47 mV and 17 mV in acidic and alkaline media, respectively. For the OER, the catalyst achieves a current density of 10 mA cm−2 at overpotentials of 300 mV and 320 mV in acidic and alkaline media, respectively. This highly active bi-functional catalyst enables total water splitting at 1.58 V (acidic) and 1.57 V (alkaline) for 10 mA cm−2. Unlike other catalysts, Ir_VG shows good stability against corrosion with undiminished current density even at high potential in harsh acidic or alkaline environments over 24 h. This unprecedented, versatile catalyst offers an appealing, cost-effective noble-metal-based scheme for pH-independent water electrolysis.
- 28 August 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (36) , 20590-20596
Iridium on vertical graphene as an all-round catalyst for robust water splitting reactions
Among all noble metals, Ir has become popular for water reduction/oxidation due to its stability in both acidic and alkaline electrolytes. We find that Ir on vertical graphene (Ir_VG) is an all-round bi-functional catalyst. A high content of metallic Ir (Ir0) manifests as active catalytic sites supported by a superaerophobic vertical graphene surface designed to facilitate two-/four-electron transfer processes. This binder-free, nanoscale hybrid catalyst yields low overpotentials for the HER and OER in both acidic and alkaline media. With a minimal catalyst loading of 50 μg cm−2 for the HER, the catalyst delivers a current density of 10 mA cm−2 at overpotentials of 47 mV and 17 mV in acidic and alkaline media, respectively. For the OER, the catalyst achieves a current density of 10 mA cm−2 at overpotentials of 300 mV and 320 mV in acidic and alkaline media, respectively. This highly active bi-functional catalyst enables total water splitting at 1.58 V (acidic) and 1.57 V (alkaline) for 10 mA cm−2. Unlike other catalysts, Ir_VG shows good stability against corrosion with undiminished current density even at high potential in harsh acidic or alkaline environments over 24 h. This unprecedented, versatile catalyst offers an appealing, cost-effective noble-metal-based scheme for pH-independent water electrolysis.
- 1 July 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (28) , 17046-17052
Design and optimization of cobalt-encapsulating vertical graphene nano-hills for hydrogen evolution reaction
Cobalt-encapsulating vertical graphene nano-hills exhibit high hydrogen evolution reaction activity because of the synergistic effects of curvature and doping.
- 1 July 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (28) , 17046-17052
Design and optimization of cobalt-encapsulating vertical graphene nano-hills for hydrogen evolution reaction
Cobalt-encapsulating vertical graphene nano-hills exhibit high hydrogen evolution reaction activity because of the synergistic effects of curvature and doping.
- 11 February 2019
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 7 (5) , 4625-4630
Chrysanthemum-Like CoP Nanostructures on Vertical Graphene Nanohills as Versatile Electrocatalysts for Water Splitting
- 11 February 2019
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 7 (5) , 4625-4630
Chrysanthemum-Like CoP Nanostructures on Vertical Graphene Nanohills as Versatile Electrocatalysts for Water Splitting
- 7 December 2017
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 9 (50) , 43674-43680
Induced Superaerophobicity onto a Non-superaerophobic Catalytic Surface for Enhanced Hydrogen Evolution Reaction
Despite tremendous progress in the development of novel electrocatalysts for hydrogen evolution reaction (HER), the accumulation of hydrogen gas bubbles produced on the catalyst surface has been rather poorly addressed. The bubbles block the surface of the electrode, thus resulting in poor performance even when excellent electrocatalysts are used. In this study, we show that vertically grown graphene nanohills (VGNHs) possess an excellent capability to quickly disengage the produced hydrogen gas bubbles from the electrode surface, and thus exhibit superaerophobic properties. To compensate for the poor electrolytic properties of graphene toward HER, the graphene surface was modified with WS2 nanoparticles to accelerate the water-splitting process by using this hybrid catalyst (VGNHs-WS2). For comparison purposes, WS2 nanoparticles were also deposited on the flat graphene (FG) surface. Because of its superior superaerophobic properties, VGNHs-WS2 outperformed FG-WS2 in terms of both catalytic activity toward the HER and superaerophobicity. Furthermore, VGNHs-WS2 exhibited a low onset potential (36 mV compared to 288 mV for FG-WS2) and long-term stability in the HER over an extended period of 20 h. This study provides an efficient way to utilize highly conductive and superaerophobic VGNHs as support materials for intrinsic semiconductors, such as WS2, to simultaneously achieve superaerophobicity and high catalytic activity.
- 7 December 2017
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 9 (50) , 43674-43680
Induced Superaerophobicity onto a Non-superaerophobic Catalytic Surface for Enhanced Hydrogen Evolution Reaction
Despite tremendous progress in the development of novel electrocatalysts for hydrogen evolution reaction (HER), the accumulation of hydrogen gas bubbles produced on the catalyst surface has been rather poorly addressed. The bubbles block the surface of the electrode, thus resulting in poor performance even when excellent electrocatalysts are used. In this study, we show that vertically grown graphene nanohills (VGNHs) possess an excellent capability to quickly disengage the produced hydrogen gas bubbles from the electrode surface, and thus exhibit superaerophobic properties. To compensate for the poor electrolytic properties of graphene toward HER, the graphene surface was modified with WS2 nanoparticles to accelerate the water-splitting process by using this hybrid catalyst (VGNHs-WS2). For comparison purposes, WS2 nanoparticles were also deposited on the flat graphene (FG) surface. Because of its superior superaerophobic properties, VGNHs-WS2 outperformed FG-WS2 in terms of both catalytic activity toward the HER and superaerophobicity. Furthermore, VGNHs-WS2 exhibited a low onset potential (36 mV compared to 288 mV for FG-WS2) and long-term stability in the HER over an extended period of 20 h. This study provides an efficient way to utilize highly conductive and superaerophobic VGNHs as support materials for intrinsic semiconductors, such as WS2, to simultaneously achieve superaerophobicity and high catalytic activity.