Lijun Yu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Lijun Yu has a total of 75 co-authors. Here are the top co-authors by number of shared publications:
Shengya Hou
6 shared publications- Fengyuan Zhang
Department of Chemical Engineering, University College London, Torrington Place, London WC1E 7JE, UK
4 shared publications Shanke Liu
4 shared publicationsSheng Cao
Institute of Thermal Energy Engineering School of Mechanical Engineering Shanghai Jiao Tong University Shanghai China
4 shared publicationsYaodong Zhou
4 shared publications- Shanke Liu
College of Smart Energy, Shanghai Jiao Tong University, Shanghai 200240, China
3 shared publications
Latest Publications
- Open Access
- 9 October 2025
- Published by Elsevier in Carbon Capture Science & Technology
- Vol. 17
Research on the multi-timescale optimization scheduling of direct air capture systems driven by renewable energy
- 9 October 2025
- Published by Elsevier in Carbon Capture Science & Technology
- Vol. 17
Open AccessResearch on the multi-timescale optimization scheduling of direct air capture systems driven by renewable energy
- Open Access
- 24 July 2025
- Published by Elsevier in International Journal of Electrical Power & Energy Systems
- Vol. 170
A hybrid ultra-short-term photovoltaic power prediction framework integrating ant colony optimization for clustering with Bi-GRU
- 24 July 2025
- Published by Elsevier in International Journal of Electrical Power & Energy Systems
- Vol. 170
Open AccessA hybrid ultra-short-term photovoltaic power prediction framework integrating ant colony optimization for clustering with Bi-GRU
- 26 March 2024
- Published by Springer Nature in Applied Physics B
- Vol. 130 (4) , 1-12
Automatic LIBS baseline correction by physical-constrained airPLS method: a case of equivalence ratio measurement in high temperature after-burn gas
- 26 March 2024
- Published by Springer Nature in Applied Physics B
- Vol. 130 (4) , 1-12
Automatic LIBS baseline correction by physical-constrained airPLS method: a case of equivalence ratio measurement in high temperature after-burn gas
- Open Access
Additives enhancing supported amines performance in CO2 capture from air
The utilization of supported amines as adsorbents in direct air capture (DAC) has been demonstrated to be a promising strategy for the reduction of CO2 emissions. To improve the performance of amine‐based adsorbents, the incorporation of additives has been widely adopted. In the present study, we conduct a comprehensive comparison of seven additives on tetraethylenepentamine‐impregnated mesoporous silica as a representative amine‐based adsorbent. The results indicate that minor molecular weight additives with hydroxyl groups show improved adsorption–desorption performance and increase oxidative stability. A proposed mechanism for these improvements is the combined physical and chemical promotion effects of hydroxyl groups. Through a comprehensive review of existing literature, it is found that the effects of additives on amine‐based adsorbents are dependent on factors, such as additive type, pristine adsorbent properties, incorporation method, and testing conditions. Based on these findings, it is recommended that future DAC systems prioritize the use of hydroxyl‐containing additives, whereas higher CO2 concentration and temperature capture may benefit from the incorporation of additives without hydroxyl groups. These conclusions are expected to contribute to the design of efficient adsorbents for CO2 capture.
Open AccessAdditives enhancing supported amines performance in CO2 capture from air
The utilization of supported amines as adsorbents in direct air capture (DAC) has been demonstrated to be a promising strategy for the reduction of CO2 emissions. To improve the performance of amine‐based adsorbents, the incorporation of additives has been widely adopted. In the present study, we conduct a comprehensive comparison of seven additives on tetraethylenepentamine‐impregnated mesoporous silica as a representative amine‐based adsorbent. The results indicate that minor molecular weight additives with hydroxyl groups show improved adsorption–desorption performance and increase oxidative stability. A proposed mechanism for these improvements is the combined physical and chemical promotion effects of hydroxyl groups. Through a comprehensive review of existing literature, it is found that the effects of additives on amine‐based adsorbents are dependent on factors, such as additive type, pristine adsorbent properties, incorporation method, and testing conditions. Based on these findings, it is recommended that future DAC systems prioritize the use of hydroxyl‐containing additives, whereas higher CO2 concentration and temperature capture may benefit from the incorporation of additives without hydroxyl groups. These conclusions are expected to contribute to the design of efficient adsorbents for CO2 capture.
- Open Access
- 5 April 2023
- Published by Wiley in Advanced Science
- Vol. 10 (16)
Mixed Diethanolamine and Polyethyleneimine with Enhanced CO2 Capture Capacity from Air
Supported polyethyleneimine (PEI) adsorbent is one of the most promising commercial direct air capture (DAC) adsorbents with a long research history since 2002. Although great efforts have been input, there are still limited improvements for this material in its CO2 capacity and adsorption kinetics under ultradilute conditions. Supported PEI also suffers significantly reduced adsorption capacities when working at sub‐ambient temperatures. This study reports that mixing diethanolamine (DEA) into supported PEI can increase 46% and 176% of pseudoequilibrium CO2 capacities at DAC conditions compared to the supported PEI and DEA, respectively. The mixed DEA/PEI functionalized adsorbents maintain the adsorption capacity at sub‐ambient temperatures of −5 to 25 °C. In comparison, a 55% reduction of CO2 capacity is observed for supported PEI when the operating temperature decreases from 25 to −5 °C. In addition, the supported mixed DEA/PEI with a ratio of 1:1 also shows fast desorption kinetics at temperatures as low as 70 °C, resulting in maintaining high thermal and chemical stability over 50 DAC cycles with a high average CO2 working capacity of 1.29 mmol g−1. These findings suggest that the concept of “mixed amine”, widely studied in the solvent system, is also practical to supported amine for DAC applications.
- 5 April 2023
- Published by Wiley in Advanced Science
- Vol. 10 (16)
Open AccessMixed Diethanolamine and Polyethyleneimine with Enhanced CO2 Capture Capacity from Air
Supported polyethyleneimine (PEI) adsorbent is one of the most promising commercial direct air capture (DAC) adsorbents with a long research history since 2002. Although great efforts have been input, there are still limited improvements for this material in its CO2 capacity and adsorption kinetics under ultradilute conditions. Supported PEI also suffers significantly reduced adsorption capacities when working at sub‐ambient temperatures. This study reports that mixing diethanolamine (DEA) into supported PEI can increase 46% and 176% of pseudoequilibrium CO2 capacities at DAC conditions compared to the supported PEI and DEA, respectively. The mixed DEA/PEI functionalized adsorbents maintain the adsorption capacity at sub‐ambient temperatures of −5 to 25 °C. In comparison, a 55% reduction of CO2 capacity is observed for supported PEI when the operating temperature decreases from 25 to −5 °C. In addition, the supported mixed DEA/PEI with a ratio of 1:1 also shows fast desorption kinetics at temperatures as low as 70 °C, resulting in maintaining high thermal and chemical stability over 50 DAC cycles with a high average CO2 working capacity of 1.29 mmol g−1. These findings suggest that the concept of “mixed amine”, widely studied in the solvent system, is also practical to supported amine for DAC applications.
- 26 January 2023
- Published by Springer Nature in Frontiers of Environmental Science & Engineering
- Vol. 17 (7) , 1-24
Frontier science and challenges on offshore carbon storage
- 26 January 2023
- Published by Springer Nature in Frontiers of Environmental Science & Engineering
- Vol. 17 (7) , 1-24
Frontier science and challenges on offshore carbon storage
- Open Access
- 19 October 2022
- Published by Elsevier in Energy Reports
- Vol. 8, 13389-13398
EMD-based multi-algorithm combination model of variable weights for oil well production forecast
- 19 October 2022
- Published by Elsevier in Energy Reports
- Vol. 8, 13389-13398
Open AccessEMD-based multi-algorithm combination model of variable weights for oil well production forecast