Vladimir Shigunov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Vladimir Shigunov has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Ould el Moctar
Chair of Autonomous and Energy Efficient Maritime Technologies, Technische Universität Berlin, Berlin, Germany
10 shared publications - Alexander von Graefe
DNV GL SE, Brooktorkai 18, Hamburg 20457, Germany
3 shared publications Thomas E. Schellin
DNV GL, Brooktorkai 18, 20457 Hamburg, Germany
3 shared publications- Apostolos Papanikolaou
School of Naval Architecture and Marine Engineering, National Technical University of Athens, 15773 Athens, Greece
2 shared publications Helge Rathje
Marine Engineering Consultant
2 shared publicationsAlexander Tide
1 shared publication
Latest Publications
- 20 April 2023
- Published by Elsevier in Ocean Engineering
- Vol. 279
Intact stability operational measures: Criteria, standards and examples
- 20 April 2023
- Published by Elsevier in Ocean Engineering
- Vol. 279
Intact stability operational measures: Criteria, standards and examples
- 29 March 2023
- Published by Springer Nature
- p. 93-112
Simplifications in Direct Stability Assessment
- 9 February 2023
- Published by Elsevier in Ocean Engineering
- Vol. 272
Extrapolation of failure rate over wave height
- 9 February 2023
- Published by Elsevier in Ocean Engineering
- Vol. 272
Extrapolation of failure rate over wave height
- 1 May 2020
- Published by Elsevier in Ocean Engineering
- Vol. 203
Practical assessment of manoeuvrability in adverse conditions
- 1 May 2020
- Published by Elsevier in Ocean Engineering
- Vol. 203
Practical assessment of manoeuvrability in adverse conditions
- 2 January 2019
- Published by Springer Nature
- p. 679-687
Research Towards Goal Based Standards for Container Shipping
- 2 January 2019
- Published by Springer Nature
- p. 679-687
Research Towards Goal Based Standards for Container Shipping
- 28 May 2018
- Published by ASME International in Journal of Offshore Mechanics and Arctic Engineering
- Vol. 140 (5) , 051102
Numerical Prediction of Added Power in Seaway
The paper describes a numerical approach to predict required added power for propulsion in waves. Such predictions are important to address fuel consumption in seaway and define suitable operating point and sea margin, as well as for routing optimization and hull performance monitoring. Added resistance and, in general, drift forces and moments due to waves are key input parameters for added power requirements. The three-dimensional Rankine source-patch method was used to compute them. The method solves the problem in the frequency domain, linearizing wave-induced motions around the fully nonlinear steady flow. The added power software combines added resistance and drift forces and moments in irregular waves with wind forces and moments, calm-water maneuvering forces and moments, rudder and propeller forces, and propulsion and engine model and provides associated resistance and power as well as changes in ship propulsion in waves. The approach is demonstrated for a container ship to compare predictions with full-scale data.
- 28 May 2018
- Published by ASME International in Journal of Offshore Mechanics and Arctic Engineering
- Vol. 140 (5) , 051102
Numerical Prediction of Added Power in Seaway
The paper describes a numerical approach to predict required added power for propulsion in waves. Such predictions are important to address fuel consumption in seaway and define suitable operating point and sea margin, as well as for routing optimization and hull performance monitoring. Added resistance and, in general, drift forces and moments due to waves are key input parameters for added power requirements. The three-dimensional Rankine source-patch method was used to compute them. The method solves the problem in the frequency domain, linearizing wave-induced motions around the fully nonlinear steady flow. The added power software combines added resistance and drift forces and moments in irregular waves with wind forces and moments, calm-water maneuvering forces and moments, rudder and propeller forces, and propulsion and engine model and provides associated resistance and power as well as changes in ship propulsion in waves. The approach is demonstrated for a container ship to compare predictions with full-scale data.
- 22 April 2018
- Published by Taylor & Francis in Ship Technology Research
- Vol. 66 (1) , 9-21
Comparison and validation of numerical methods to assess hydrodynamic loads on mechanical coupling of multiple bodies
In the design of articulated systems, accurate prediction of loads on mechanical couplings is important for the dimensioning of the coupling, as well as an assessment of local and global structural loads. The paper studies a twofold pushing convoy in shallow water. Several numerical approaches for the prediction of articulation loads are compared with each other and with model tests. Kinematic constraints are applied to couple the bodies at articulation points to model hinge and rigid mechanical couplings. For comparison, contact elements are also used to simulate hinges. Depending on the articulation model numerical computations are conducted in frequency or time domain. Comparison between different numerical methods and with model experiments shows that the proposed methods can predict articulation loads with sufficient accuracy for design purposes. The frequency domain approach with kinematic constraints seems more suitable to compute the hinge coupling forces than time-domain simulations with contact elements.
- 22 April 2018
- Published by Taylor & Francis in Ship Technology Research
- Vol. 66 (1) , 9-21
Comparison and validation of numerical methods to assess hydrodynamic loads on mechanical coupling of multiple bodies
In the design of articulated systems, accurate prediction of loads on mechanical couplings is important for the dimensioning of the coupling, as well as an assessment of local and global structural loads. The paper studies a twofold pushing convoy in shallow water. Several numerical approaches for the prediction of articulation loads are compared with each other and with model tests. Kinematic constraints are applied to couple the bodies at articulation points to model hinge and rigid mechanical couplings. For comparison, contact elements are also used to simulate hinges. Depending on the articulation model numerical computations are conducted in frequency or time domain. Comparison between different numerical methods and with model experiments shows that the proposed methods can predict articulation loads with sufficient accuracy for design purposes. The frequency domain approach with kinematic constraints seems more suitable to compute the hinge coupling forces than time-domain simulations with contact elements.
- Open Access
- 26 February 2018
- Published by Springer Nature in Journal of Marine Science and Technology
- Vol. 23 (4) , 977
Correction to: Manoeuvrability in adverse conditions: rational criteria and standards
- 26 February 2018
- Published by Springer Nature in Journal of Marine Science and Technology
- Vol. 23 (4) , 977
Open AccessCorrection to: Manoeuvrability in adverse conditions: rational criteria and standards
- Open Access
- 15 January 2018
- Published by Springer Nature in Journal of Marine Science and Technology
- Vol. 23 (4) , 958-976
Manoeuvrability in adverse conditions: rational criteria and standards
- 15 January 2018
- Published by Springer Nature in Journal of Marine Science and Technology
- Vol. 23 (4) , 958-976
Open AccessManoeuvrability in adverse conditions: rational criteria and standards
- 2 September 2017
- Published by Taylor & Francis in Ship Technology Research
- Vol. 64 (3) , 144-162
Direct stability assessment: pragmatic solutions
The second-generation intact stability criteria developed at IMO consist of three alternative assessments: level 1, level 2 and a direct stability assessment (DSA). In a probabilistic DSA, the probability of stability failure is used as a criterion, which requires some form of counting of stability failure events and therefore, requires very long simulation time. The paper studies several possibilities to simplify DSA and thus enables its use in practical design approval: extrapolation of the average time to stability failure over wave height, reduction of the number of assessment cases to few selected design situations, and use of non-probabilistic safety criteria. The results show that the extrapolation leads to sufficiently accurate results; however, outliers may require manual control; the design situations’ method provides sufficiently accurate results while significantly reducing the number of required simulations; non-probabilistic assessment significantly reduces simulation time but leads to a significant scatter of the assessment results.
- 2 September 2017
- Published by Taylor & Francis in Ship Technology Research
- Vol. 64 (3) , 144-162
Direct stability assessment: pragmatic solutions
The second-generation intact stability criteria developed at IMO consist of three alternative assessments: level 1, level 2 and a direct stability assessment (DSA). In a probabilistic DSA, the probability of stability failure is used as a criterion, which requires some form of counting of stability failure events and therefore, requires very long simulation time. The paper studies several possibilities to simplify DSA and thus enables its use in practical design approval: extrapolation of the average time to stability failure over wave height, reduction of the number of assessment cases to few selected design situations, and use of non-probabilistic safety criteria. The results show that the extrapolation leads to sufficiently accurate results; however, outliers may require manual control; the design situations’ method provides sufficiently accurate results while significantly reducing the number of required simulations; non-probabilistic assessment significantly reduces simulation time but leads to a significant scatter of the assessment results.