Daniel Joly
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Daniel Joly has a total of 55 co-authors. Here are the top co-authors by number of shared publications:
- Hervé Cardot
CESAER, Dijon Cedex, France
5 shared publications - Mohamed Hilal
INRA-CESAER
4 shared publications Yves Richard
Centre de Recherches de Climatologie / Biogéosciences, CNRS and Université Bourgogne Franche-Comté, Dijon, France
4 shared publications- Benjamin Pohl
Biogéosciences, UMR6282 CNRS / Université Bourgogne Europe, Dijon, 21000, France
3 shared publications - Thierry Brossard3 shared publications
A. Elvebakk
Department of Biology, University of Tromsø, N-9037 Tromsø, Norway
2 shared publications
Latest Publications
- Open Access
- 1 January 2022
- Published by EDP Sciences in Climatologie
- Vol. 19, 5
Temperature inversions in France – Part B: Spatial variations
Our database comprises daily minimum and maximum temperatures observed over 10 years at 859 pairs of meteorological stations throughout France. Each pairing associates a low and a high station. The influence of six predictors on the intensity, frequency, and duration of temperature inversions is measured by linear regressions. Five predictors are drawn from a 250 m-resolution DTM: elevation, depth of the valley where the low stations are located, magnitude of positive relief (ridge, hills), gradient of the slope of the hill or mountainside, and altitudinal amplitude between the high and the low station. The sixth descriptor used is the distance to the nearest sea. Topography exerts a major influence over the formation of thermal inversions. Three of the descriptors account for more than 80% of the variance of the inversion characters: distance to the sea, valley depth, and altitudinal amplitude. Elevation explains only 24% of that variance. The spatial distribution of the three characteristics of the inversions highlights several categorizations that fit into several nested scales. The 859 sites can be arranged into three classes relating to mountains, coastal areas, and plateaus. However, their distribution over the area under consideration is unclear and fails to indicate sharply delimited groupings. La base de données étudiée comprend les températures minimales et maximales quotidiennes observées sur 10 ans dans 859 paires de stations météorologiques réparties sur toute la France. Chaque paire associe une station basse et une station haute. L’influence de six prédicteurs sur l’intensité, la fréquence et la durée des inversions de température est mesurée par des régressions linéaires. Cinq prédicteurs sont tirés d’un MNT à 250 m de résolution : l’altitude, la profondeur de la vallée où sont situées les stations basses, l’amplitude du relief positif (crête, collines), le gradient de la pente des reliefs et l’amplitude altitudinale entre la station haute et la station basse. Le sixième descripteur utilisé est la distance à la mer ou à l’océan le plus proche. La topographie exerce une influence majeure dans la formation des inversions thermiques. Trois des descripteurs expliquent plus de 80% de la variance des caractères d’inversion : la distance à la mer, la profondeur des vallées et l’amplitude altitudinale. L’altitude n’explique que 24% de cette variance. La distribution spatiale des trois caractéristiques des inversions met en évidence plusieurs catégories qui s’inscrivent dans plusieurs échelles emboîtées. Les 859 sites peuvent être classés en trois classes relatives aux montagnes, aux zones côtières et aux plateaux. Cependant, leur répartition sur la zone étudiée ne permet pas de dégager des regroupements nettement délimités dans l’espace.
- 1 January 2022
- Published by EDP Sciences in Climatologie
- Vol. 19, 5
Open AccessTemperature inversions in France – Part B: Spatial variations
Our database comprises daily minimum and maximum temperatures observed over 10 years at 859 pairs of meteorological stations throughout France. Each pairing associates a low and a high station. The influence of six predictors on the intensity, frequency, and duration of temperature inversions is measured by linear regressions. Five predictors are drawn from a 250 m-resolution DTM: elevation, depth of the valley where the low stations are located, magnitude of positive relief (ridge, hills), gradient of the slope of the hill or mountainside, and altitudinal amplitude between the high and the low station. The sixth descriptor used is the distance to the nearest sea. Topography exerts a major influence over the formation of thermal inversions. Three of the descriptors account for more than 80% of the variance of the inversion characters: distance to the sea, valley depth, and altitudinal amplitude. Elevation explains only 24% of that variance. The spatial distribution of the three characteristics of the inversions highlights several categorizations that fit into several nested scales. The 859 sites can be arranged into three classes relating to mountains, coastal areas, and plateaus. However, their distribution over the area under consideration is unclear and fails to indicate sharply delimited groupings. La base de données étudiée comprend les températures minimales et maximales quotidiennes observées sur 10 ans dans 859 paires de stations météorologiques réparties sur toute la France. Chaque paire associe une station basse et une station haute. L’influence de six prédicteurs sur l’intensité, la fréquence et la durée des inversions de température est mesurée par des régressions linéaires. Cinq prédicteurs sont tirés d’un MNT à 250 m de résolution : l’altitude, la profondeur de la vallée où sont situées les stations basses, l’amplitude du relief positif (crête, collines), le gradient de la pente des reliefs et l’amplitude altitudinale entre la station haute et la station basse. Le sixième descripteur utilisé est la distance à la mer ou à l’océan le plus proche. La topographie exerce une influence majeure dans la formation des inversions thermiques. Trois des descripteurs expliquent plus de 80% de la variance des caractères d’inversion : la distance à la mer, la profondeur des vallées et l’amplitude altitudinale. L’altitude n’explique que 24% de cette variance. La distribution spatiale des trois caractéristiques des inversions met en évidence plusieurs catégories qui s’inscrivent dans plusieurs échelles emboîtées. Les 859 sites peuvent être classés en trois classes relatives aux montagnes, aux zones côtières et aux plateaux. Cependant, leur répartition sur la zone étudiée ne permet pas de dégager des regroupements nettement délimités dans l’espace.
- Open Access
- 1 January 2022
- Published by EDP Sciences in Climatologie
- Vol. 19, 4
Temperature inversions in France – Part A: time variations
Temperature inversions in mainland France are computed using a network of 859 sampling sites spread as evenly as possible across the country. Each site comprises a high station located within 30 km of the low station with which it is paired. We use the daily minimum (tn) and maximum (tx) temperatures from Météo-France weather stations over 10 years (2008–2017). The time variations of three inversion characteristics (frequency, intensity, and duration) are explored. The primary result is the high frequency of inversions. On average, for the 859 sites, tn-inversions occur on 63% of days and tx-inversions on 22.6%. Inversion intensity is usually weak, the mode being 2°C for tn and 1°C for tx. However, high intensities may be reached (maximum 23.6°C for tn and 22.6°C for tx). The longest sequence of isolated tn-inversions (the inversion is destroyed in the daytime but recurs over several days) ran for more than four months (126 days). Such inversions occur most frequently from August to October. The longest sequence of isolated tx-inversions (the inversion is destroyed overnight) ran for 38 days. Such inversions are most common from November to February. The longest persistent inversion (night and day) lasted 88 days. Persistent inversions occur most frequently from November to January. The results as a whole reveal a number of original points: the existence of a large number of tx-inversion sequences, the seasonal pattern very clearly differentiating tn- and tx-inversions, and the significance of atmospheric conditions.
- 1 January 2022
- Published by EDP Sciences in Climatologie
- Vol. 19, 4
Open AccessTemperature inversions in France – Part A: time variations
Temperature inversions in mainland France are computed using a network of 859 sampling sites spread as evenly as possible across the country. Each site comprises a high station located within 30 km of the low station with which it is paired. We use the daily minimum (tn) and maximum (tx) temperatures from Météo-France weather stations over 10 years (2008–2017). The time variations of three inversion characteristics (frequency, intensity, and duration) are explored. The primary result is the high frequency of inversions. On average, for the 859 sites, tn-inversions occur on 63% of days and tx-inversions on 22.6%. Inversion intensity is usually weak, the mode being 2°C for tn and 1°C for tx. However, high intensities may be reached (maximum 23.6°C for tn and 22.6°C for tx). The longest sequence of isolated tn-inversions (the inversion is destroyed in the daytime but recurs over several days) ran for more than four months (126 days). Such inversions occur most frequently from August to October. The longest sequence of isolated tx-inversions (the inversion is destroyed overnight) ran for 38 days. Such inversions are most common from November to February. The longest persistent inversion (night and day) lasted 88 days. Persistent inversions occur most frequently from November to January. The results as a whole reveal a number of original points: the existence of a large number of tx-inversion sequences, the seasonal pattern very clearly differentiating tn- and tx-inversions, and the significance of atmospheric conditions.
- 19 October 2020
- Published by Springer Nature in Theoretical and Applied Climatology
- Vol. 143 (1-2) , 327-339
Enhancing air quality forecasts by geomatic downscaling: an application to daily PM10 concentrations in France
- 19 October 2020
- Published by Springer Nature in Theoretical and Applied Climatology
- Vol. 143 (1-2) , 327-339
Enhancing air quality forecasts by geomatic downscaling: an application to daily PM10 concentrations in France
- 8 April 2019
- Published by Springer Nature in Theoretical and Applied Climatology
- Vol. 138 (1-2) , 639-655
Frequency, intensity, and duration of thermal inversions in the Jura Mountains of France
- 8 April 2019
- Published by Springer Nature in Theoretical and Applied Climatology
- Vol. 138 (1-2) , 639-655
Frequency, intensity, and duration of thermal inversions in the Jura Mountains of France
- Open Access
- 14 February 2019
- Published by Wiley in International Journal of Climatology
- Vol. 39 (8) , 3619-3638
Atmospheric circulation modulates the spatial variability of temperature in the Atlantic–Arctic region
- 14 February 2019
- Published by Wiley in International Journal of Climatology
- Vol. 39 (8) , 3619-3638
Open AccessAtmospheric circulation modulates the spatial variability of temperature in the Atlantic–Arctic region
- Open Access
- 22 August 2018
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 50, 01003
Climate zoning of the Burgundy winegrowing region
As one of the most emblematic wine regions of cool climate terroir viticulture, Burgundy is endowed with a set of very specific natural features suitable to the production of high quality wines, where climate is arguably one of the main factors to profoundly influence vine physiology/phenology and grape composition. These environmental nuances have led to a wide variety of styles in Pinot noir and Chardonnay wines that have been largely acknowledged and appreciated by the international market and vitivinicultural industry. However, individual grape varieties optimum quality is known to be closely related to well-defined climate and geographical ranges. Climate change and global warming latest trends make them more susceptible to undergo modifications in terms of berry ripening processes and advancements in harvest dates due to short-term and long-term spatiotemporal fluctuations in climate variability. The impact of air temperature on grapevine development and harvest outcomes has been widely documented by the scientific community, its influence translating as quality and quantity fluctuations in space (“terroir”effect) and time (“vintage”effect). Through this study we aim to assess the extent of these threats by means of modelling and spatializing the regional climate variations based on 5 agricultural climatic indices: the number of days with temperatures equal or greater than 35°C (heat stress), the number of days indicating a frost risk (equal or greater than -1°C), the mid-flowering, the mid-véraison and the theoretical grape maturity (200g/l of sugar) occurrence dates. Mid-flowering, mid-véraison as well as the theoretical grape maturity were estimated through the summation of temperatures over 10°C (starting 1stof March) based on the GFV (Grapevine Flowering Véraison) linear phenological model and were calculated for the 2 prime varieties cultivated in Burgundy (Chardonnay and Pinot noir). Daily minimum and maximum temperatures issued from a network of 64 weather stations scattered throughout the main 9 wine production subregions of Burgundy were spatially interpolated on a grid with a 75m resolution over a 41751ha area (74556 pixels). Spatial interpolations were performed at a daily time step integrating various topographical features through a regression-kriging model for the 2011-2015 period. Daily grid minimum and maximum temperatures were further used to calculate the 5 agroclimatic indices for each of the years of the study period. The entirety of the 74556 pixels were later classified at regular intervals in 6 groups which were assigned to each of the three phenological stages:“very early”,“early”, “intermediate”,“late”,“very late”and“variable”. The number of heat stress days as well as those presenting a frost risk were equally classified based on their occurrence as“very rare”,“rare”,“intermediate”,“frequent”and“very frequent”. The annual spatial structure of the individual classes was very similar due to temperature distribution being strongly governed by terrain features. We were able to identify observable differences between the north and the south subregions of Burgundy with a potential variation ranging from 7 to 15 days in terms of phenological and theoretical maturity occurrence dates. Côte de Nuits and Côte de Beaune vineyards indicate similar climate characteristics with early phenological timing (97% and 82% respectively of the area classified as“early”) and little frost and heat risks. The number of days with a frost risk is a lot more elevated in the Côte Châtillonnaise and the Chablis subregions, while the number of heat stress days was larger in the subregions located in the south of Burgundy.
- 22 August 2018
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 50, 01003
Open AccessClimate zoning of the Burgundy winegrowing region
As one of the most emblematic wine regions of cool climate terroir viticulture, Burgundy is endowed with a set of very specific natural features suitable to the production of high quality wines, where climate is arguably one of the main factors to profoundly influence vine physiology/phenology and grape composition. These environmental nuances have led to a wide variety of styles in Pinot noir and Chardonnay wines that have been largely acknowledged and appreciated by the international market and vitivinicultural industry. However, individual grape varieties optimum quality is known to be closely related to well-defined climate and geographical ranges. Climate change and global warming latest trends make them more susceptible to undergo modifications in terms of berry ripening processes and advancements in harvest dates due to short-term and long-term spatiotemporal fluctuations in climate variability. The impact of air temperature on grapevine development and harvest outcomes has been widely documented by the scientific community, its influence translating as quality and quantity fluctuations in space (“terroir”effect) and time (“vintage”effect). Through this study we aim to assess the extent of these threats by means of modelling and spatializing the regional climate variations based on 5 agricultural climatic indices: the number of days with temperatures equal or greater than 35°C (heat stress), the number of days indicating a frost risk (equal or greater than -1°C), the mid-flowering, the mid-véraison and the theoretical grape maturity (200g/l of sugar) occurrence dates. Mid-flowering, mid-véraison as well as the theoretical grape maturity were estimated through the summation of temperatures over 10°C (starting 1stof March) based on the GFV (Grapevine Flowering Véraison) linear phenological model and were calculated for the 2 prime varieties cultivated in Burgundy (Chardonnay and Pinot noir). Daily minimum and maximum temperatures issued from a network of 64 weather stations scattered throughout the main 9 wine production subregions of Burgundy were spatially interpolated on a grid with a 75m resolution over a 41751ha area (74556 pixels). Spatial interpolations were performed at a daily time step integrating various topographical features through a regression-kriging model for the 2011-2015 period. Daily grid minimum and maximum temperatures were further used to calculate the 5 agroclimatic indices for each of the years of the study period. The entirety of the 74556 pixels were later classified at regular intervals in 6 groups which were assigned to each of the three phenological stages:“very early”,“early”, “intermediate”,“late”,“very late”and“variable”. The number of heat stress days as well as those presenting a frost risk were equally classified based on their occurrence as“very rare”,“rare”,“intermediate”,“frequent”and“very frequent”. The annual spatial structure of the individual classes was very similar due to temperature distribution being strongly governed by terrain features. We were able to identify observable differences between the north and the south subregions of Burgundy with a potential variation ranging from 7 to 15 days in terms of phenological and theoretical maturity occurrence dates. Côte de Nuits and Côte de Beaune vineyards indicate similar climate characteristics with early phenological timing (97% and 82% respectively of the area classified as“early”) and little frost and heat risks. The number of days with a frost risk is a lot more elevated in the Côte Châtillonnaise and the Chablis subregions, while the number of heat stress days was larger in the subregions located in the south of Burgundy.
- Open Access
- 20 August 2018
- Published by Wiley in International Journal of Climatology
- Vol. 38 (15) , 5677-5688
Influence of spatial information resolution on the relation between elevation and temperature
The association between elevation and temperature is analysed by simple linear correlations across several spatial scales. The minimum (tn) and maximum (tx) temperatures (response variables), expressed at two time scales (monthly and daily), are observed for 102 weather stations in east central France from 1980 to 2014 (12,784 days). Elevation (explanatory variable) is provided at 10 resolutions: 50, 100, 200, 500 m, 1, 2, 4, 8, 12, and 16 km. The coefficient of determination, R2, is used to determine which resolution gives the best results. The slope given by the regression is used to assess the drop in temperature per unit of elevation (temperature lapse rate [TLR]). In most situations, monthly and daily temperatures are optimally explained by the finest (50 m) resolution: the R2 is, respectively, 0.53 and 0.24 for tn and 0.78 and 0.39 for tx. The coarser resolutions produce results of much lower quality. However, in one circumstance (monthly mean of tn), the highest R2 value is obtained for the 4‐km resolution, which is a meaningful result as current regional climate models now achieve similar resolutions. Both monthly and daily TLRs of tn and tx are, on average, slightly lower than −0.5 °C/100 m at 50‐m resolution. The TLR decreases with resolution: it is only −0.23 °C/100 m for tn and −0.13 °C/100 m for tx at 16‐km resolution. Other insightful results involve the influence of the topographical context, which shows some additional effect with that of elevation and which was quantified through partial correlations.
- 20 August 2018
- Published by Wiley in International Journal of Climatology
- Vol. 38 (15) , 5677-5688
Open AccessInfluence of spatial information resolution on the relation between elevation and temperature
The association between elevation and temperature is analysed by simple linear correlations across several spatial scales. The minimum (tn) and maximum (tx) temperatures (response variables), expressed at two time scales (monthly and daily), are observed for 102 weather stations in east central France from 1980 to 2014 (12,784 days). Elevation (explanatory variable) is provided at 10 resolutions: 50, 100, 200, 500 m, 1, 2, 4, 8, 12, and 16 km. The coefficient of determination, R2, is used to determine which resolution gives the best results. The slope given by the regression is used to assess the drop in temperature per unit of elevation (temperature lapse rate [TLR]). In most situations, monthly and daily temperatures are optimally explained by the finest (50 m) resolution: the R2 is, respectively, 0.53 and 0.24 for tn and 0.78 and 0.39 for tx. The coarser resolutions produce results of much lower quality. However, in one circumstance (monthly mean of tn), the highest R2 value is obtained for the 4‐km resolution, which is a meaningful result as current regional climate models now achieve similar resolutions. Both monthly and daily TLRs of tn and tx are, on average, slightly lower than −0.5 °C/100 m at 50‐m resolution. The TLR decreases with resolution: it is only −0.23 °C/100 m for tn and −0.13 °C/100 m for tx at 16‐km resolution. Other insightful results involve the influence of the topographical context, which shows some additional effect with that of elevation and which was quantified through partial correlations.
- Open Access
- 25 September 2017
- Published by Wiley in International Journal of Climatology
- Vol. 38 (4) , 1846-1863
Geomatic downscaling of temperatures in the Mont Blanc massif
This article presents a novel downscaling method based on a geomatic spatial model. This model is constructed on the basis of regressions between topographical (explanatory) variables (digitized here at 200 m resolution) and climatic factors observed at meteorological stations. These regressions are used to calibrate the model in the form of two parameters: the frequency with which explanatory variables are significant at the 95% level, and the mean of the regression coefficient associated with each variable. One of the objectives of the article is to test the relevance of the method and the application made of it in this study bears on daily observed minimum (tn) and maximum (tx) temperatures in the Mont Blanc massif between 1979 and 2014. Estimations show weak statistical biases and the temperature variation from day to day is well represented. The root mean square errors of daily temperatures are of the order of 2 °C for tn and tx alike. The validation shows (1) the value of applying spatial models to two atmospheric configurations (weather regimes and local rainfall conditions) and (2) the limitations of the method. Eventually, this method shall be applied to the downscaling of large‐scale atmospheric parameters provided by earth system models for projecting the temperature of the lower layers of the atmosphere over future decades.
- 25 September 2017
- Published by Wiley in International Journal of Climatology
- Vol. 38 (4) , 1846-1863
Open AccessGeomatic downscaling of temperatures in the Mont Blanc massif
This article presents a novel downscaling method based on a geomatic spatial model. This model is constructed on the basis of regressions between topographical (explanatory) variables (digitized here at 200 m resolution) and climatic factors observed at meteorological stations. These regressions are used to calibrate the model in the form of two parameters: the frequency with which explanatory variables are significant at the 95% level, and the mean of the regression coefficient associated with each variable. One of the objectives of the article is to test the relevance of the method and the application made of it in this study bears on daily observed minimum (tn) and maximum (tx) temperatures in the Mont Blanc massif between 1979 and 2014. Estimations show weak statistical biases and the temperature variation from day to day is well represented. The root mean square errors of daily temperatures are of the order of 2 °C for tn and tx alike. The validation shows (1) the value of applying spatial models to two atmospheric configurations (weather regimes and local rainfall conditions) and (2) the limitations of the method. Eventually, this method shall be applied to the downscaling of large‐scale atmospheric parameters provided by earth system models for projecting the temperature of the lower layers of the atmosphere over future decades.
- 22 March 2017
- Published by Wiley in International Journal of Climatology
- Vol. 37 (S1) , 659-670
Interpolation of temperatures under forest cover on a regional scale in the French Jura Mountains
A network of 48 stations was setup in the Jura Mountains (France) to interpolate temperatures under forest cover, an environment that differs markedly from open sites. The stations were positioned so as to sample all topographical settings. The series analysed consisted of the daily minima and maxima extracted from observations recorded for a year (356 days). Regressions were used to describe relations between temperatures under forest cover (dependent random variables) and a set of explanatory variables: latitudinal and longitudinal variations, distance to the nearest forest edge, and seven variables derived from a digital terrain model by geomatic computation [elevation, slope gradient, sine and cosine of slope aspect, global radiation (g‐rad), valley depth, and hump amplitude]. Elevation is the variable that most strongly affects the spatial variation of temperatures under forest cover followed by valley depth, longitudinal variation, and g‐rad (for maxima only). Variables that are significant at the 10% level are combined in multiple regressions with a view to estimating temperatures at 50 m resolution. TheMAEvalues are 0.82 and 0.77 °C for minima and maxima, respectively; adjustedR2values are 0.47 for minima and 0.64 for maxima. Finally, we present four maps of estimated temperature under forest cover.
- 22 March 2017
- Published by Wiley in International Journal of Climatology
- Vol. 37 (S1) , 659-670
Interpolation of temperatures under forest cover on a regional scale in the French Jura Mountains
A network of 48 stations was setup in the Jura Mountains (France) to interpolate temperatures under forest cover, an environment that differs markedly from open sites. The stations were positioned so as to sample all topographical settings. The series analysed consisted of the daily minima and maxima extracted from observations recorded for a year (356 days). Regressions were used to describe relations between temperatures under forest cover (dependent random variables) and a set of explanatory variables: latitudinal and longitudinal variations, distance to the nearest forest edge, and seven variables derived from a digital terrain model by geomatic computation [elevation, slope gradient, sine and cosine of slope aspect, global radiation (g‐rad), valley depth, and hump amplitude]. Elevation is the variable that most strongly affects the spatial variation of temperatures under forest cover followed by valley depth, longitudinal variation, and g‐rad (for maxima only). Variables that are significant at the 10% level are combined in multiple regressions with a view to estimating temperatures at 50 m resolution. TheMAEvalues are 0.82 and 0.77 °C for minima and maxima, respectively; adjustedR2values are 0.47 for minima and 0.64 for maxima. Finally, we present four maps of estimated temperature under forest cover.