Jean Clérouin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jean Clérouin has a total of 242 co-authors. Here are the top co-authors by number of shared publications:
Philippe Arnault
CEA-DAM-DIF, F-91297 Arpajon, France
7 shared publications- Christopher Ticknor
Theoretical Division, Los Alamos National Laboratory , Los Alamos, New Mexico 87545
6 shared publications Joel D. Kress
Theoretical Division Los Alamos National Laboratory Los Alamos, New Mexico
6 shared publicationsLee A. Collins
Theoretical Division Los Alamos National Laboratory Los Alamos, New Mexico
6 shared publications- Augustin Blanchet
CEA DAM-DIF 4 , F-91297 Arpajon
5 shared publications - Nicolas Desbiens
CEA, DAM, DIF, 91297 Arpajon, France
5 shared publications
Latest Publications
- Open Access
- 1 July 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (7) , 073501
Roadmap for warm dense matter physics
This roadmap presents the state-of-the-art, current challenges and near future developments anticipated in the thriving field of warm dense matter (WDM) physics. Originating from strongly coupled plasma physics, high pressure physics and high energy density science, the WDM physics community has recently taken a giant leap forward. This is due to spectacular developments in laser technology, diagnostic capabilities, and computer simulation techniques. Only in the last decade has it become possible to perform accurate enough simulations & experiments to truly verify theoretical results as well as to reliably design experiments based on predictions. Consequently, this roadmap discusses recent developments of and contemporary challenges for theoretical methods and experimental techniques needed to describe, create and diagnose WDM. A large part of this roadmap is dedicated to specific WDM systems and applications in astrophysics, inertial confinement fusion and novel material synthesis.
- 1 July 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (7) , 073501
Open AccessRoadmap for warm dense matter physics
This roadmap presents the state-of-the-art, current challenges and near future developments anticipated in the thriving field of warm dense matter (WDM) physics. Originating from strongly coupled plasma physics, high pressure physics and high energy density science, the WDM physics community has recently taken a giant leap forward. This is due to spectacular developments in laser technology, diagnostic capabilities, and computer simulation techniques. Only in the last decade has it become possible to perform accurate enough simulations & experiments to truly verify theoretical results as well as to reliably design experiments based on predictions. Consequently, this roadmap discusses recent developments of and contemporary challenges for theoretical methods and experimental techniques needed to describe, create and diagnose WDM. A large part of this roadmap is dedicated to specific WDM systems and applications in astrophysics, inertial confinement fusion and novel material synthesis.
- 28 October 2025
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 163 (16)
Abinit 2025: New capabilities for the predictive modeling of solids and nanomaterials
Abinit is a widely used scientific software package implementing density functional theory and many related functionalities for excited states and response properties. This paper presents the novel features and capabilities, both technical and scientific, which have been implemented over the past 5 years. This evolution occurred in the context of evolving hardware platforms, high-throughput calculation campaigns, and the growing use of machine learning to predict properties based on databases of first-principle results. We present new methodologies for ground states with constrained charge, spin, or temperature; for density functional perturbation theory extensions to flexoelectricity and polarons; and for excited states in many-body frameworks including GW, dynamical mean field theory, and coupled cluster. Technical advances have extended Abinit high-performance execution to graphical processing units and intensive parallelism. Second-principles methods build effective models on top of first-principle results to scale up in length and time scales. Finally, workflows have been developed in different community frameworks to automate Abinit calculations and enable users to simulate hundreds or thousands of materials in controlled and reproducible conditions.
- 28 October 2025
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 163 (16)
Abinit 2025: New capabilities for the predictive modeling of solids and nanomaterials
Abinit is a widely used scientific software package implementing density functional theory and many related functionalities for excited states and response properties. This paper presents the novel features and capabilities, both technical and scientific, which have been implemented over the past 5 years. This evolution occurred in the context of evolving hardware platforms, high-throughput calculation campaigns, and the growing use of machine learning to predict properties based on databases of first-principle results. We present new methodologies for ground states with constrained charge, spin, or temperature; for density functional perturbation theory extensions to flexoelectricity and polarons; and for excited states in many-body frameworks including GW, dynamical mean field theory, and coupled cluster. Technical advances have extended Abinit high-performance execution to graphical processing units and intensive parallelism. Second-principles methods build effective models on top of first-principle results to scale up in length and time scales. Finally, workflows have been developed in different community frameworks to automate Abinit calculations and enable users to simulate hundreds or thousands of materials in controlled and reproducible conditions.
- 16 January 2025
- Published by American Physical Society (APS) in Physical Review E
- Vol. 111 (1) , 015206
First-principles molecular-dynamics equation of state of liquid to dense plasma iron
We computed the equation of state of iron using extended first-principles molecular dynamics simulations, ranging from 7.874g/cm^{3} and 5500 K up to 47.2g/cm^{3} and 10^{9}K. We compared the principal Hugoniot curve with semiempirical models, average atom-based model predictions, and shock experiment results. We derived the Helmholtz free energy and the entropy via thermodynamic integration along isochores. We explore the ionization processes at play along the Hugoniot curve by analyzing the evolution of the electronic densities of states in the gigabar regime.
- 16 January 2025
- Published by American Physical Society (APS) in Physical Review E
- Vol. 111 (1) , 015206
First-principles molecular-dynamics equation of state of liquid to dense plasma iron
We computed the equation of state of iron using extended first-principles molecular dynamics simulations, ranging from 7.874g/cm^{3} and 5500 K up to 47.2g/cm^{3} and 10^{9}K. We compared the principal Hugoniot curve with semiempirical models, average atom-based model predictions, and shock experiment results. We derived the Helmholtz free energy and the entropy via thermodynamic integration along isochores. We explore the ionization processes at play along the Hugoniot curve by analyzing the evolution of the electronic densities of states in the gigabar regime.
- 19 October 2022
- Published by American Physical Society (APS) in Physical Review E
- Vol. 106 (4) , 045204
Equivalence between pressure- and structure-defined ionization in hot dense carbon
The determination of the ionization of a system in the hot dense regime is a long standing issue. Recent studies have shown inconsistencies between standard predictions using average atom models and evaluations deduced from electronic transport properties computed with quantum molecular dynamics simulations [Bethkenhagen et al., Phys. Rev. Res. 2, 023260 (2020)]. Here, we propose a definition of the ionization based on its effect on the plasma structure as given by the pair distribution function (PDF), and on the concept of effective one-component plasma (eOCP). We also introduce a definition based on the total pressure and on a modelization of the electronic pressure. We show the equivalence of these definitions on two studies of carbon along the 100 eV isotherm and the 10 g/ isochor. Simulations along the 100 eV isotherm are obtained with the newly implemented Ext. First principles molecular dynamics (Fpmd) method in Abinit for densities ranging from 1 to 500 g/cm along the 10 g/ isochor with the recently published Spectral quadrature DFT (Sqdft) simulations, between 8 and 860 eV. The resulting ionizations are compared to the predictions of the average-atom code Qaam which is based on the muffin-tin approximation. A disagreement between the eOCP and the actual PDFs (non-OCP behavior) is interpreted as the onset of bonding in the system.- 19 October 2022
- Published by American Physical Society (APS) in Physical Review E
- Vol. 106 (4) , 045204
Equivalence between pressure- and structure-defined ionization in hot dense carbon
The determination of the ionization of a system in the hot dense regime is a long standing issue. Recent studies have shown inconsistencies between standard predictions using average atom models and evaluations deduced from electronic transport properties computed with quantum molecular dynamics simulations [Bethkenhagen et al., Phys. Rev. Res. 2, 023260 (2020)]. Here, we propose a definition of the ionization based on its effect on the plasma structure as given by the pair distribution function (PDF), and on the concept of effective one-component plasma (eOCP). We also introduce a definition based on the total pressure and on a modelization of the electronic pressure. We show the equivalence of these definitions on two studies of carbon along the 100 eV isotherm and the 10 g/ isochor. Simulations along the 100 eV isotherm are obtained with the newly implemented Ext. First principles molecular dynamics (Fpmd) method in Abinit for densities ranging from 1 to 500 g/cm along the 10 g/ isochor with the recently published Spectral quadrature DFT (Sqdft) simulations, between 8 and 860 eV. The resulting ionizations are compared to the predictions of the average-atom code Qaam which is based on the muffin-tin approximation. A disagreement between the eOCP and the actual PDFs (non-OCP behavior) is interpreted as the onset of bonding in the system.- 26 July 2021
- Published by Wiley in Contributions to Plasma Physics
- Vol. 61 (10)
The advent of ab initio simulations of dense plasmas
We present the story of full three‐dimensional ab initio simulation techniques of dense plasmas based on the Kohn–Sham realization of the density functional theory, starting from early attempts using the Car–Parrinello method to the most recent approaches based on density matrix. We recall the decisive role played by two experiments, one on the Nova laser and the other at a much smaller scale, with pulsed electrical discharges. We emphasize that the essential roles of the Physics of Non‐Ideal Plasmas (PNP) and Strongly Coupled Coulomb Systems (SCCS) conference series were most results, and simulation tools were presented and discussed under the benevolent presence of Vladimir Fortov.
- 26 July 2021
- Published by Wiley in Contributions to Plasma Physics
- Vol. 61 (10)
The advent of ab initio simulations of dense plasmas
We present the story of full three‐dimensional ab initio simulation techniques of dense plasmas based on the Kohn–Sham realization of the density functional theory, starting from early attempts using the Car–Parrinello method to the most recent approaches based on density matrix. We recall the decisive role played by two experiments, one on the Nova laser and the other at a much smaller scale, with pulsed electrical discharges. We emphasize that the essential roles of the Physics of Non‐Ideal Plasmas (PNP) and Strongly Coupled Coulomb Systems (SCCS) conference series were most results, and simulation tools were presented and discussed under the benevolent presence of Vladimir Fortov.
- 1 December 2020
- Published by AIP Publishing in Physics of Plasmas
- Vol. 27 (12) , 122706
Requirements for very high temperature Kohn–Sham DFT simulations and how to bypass them
In high-temperature density functional theory simulations (from tens of eV to keV), the total number of Kohn–Sham orbitals is a critical quantity to get accurate results. To establish the relationship between the number of orbitals and the level of occupation of the highest energy orbital, we derived a model based on the homogeneous electron gas properties at finite temperature. This model predicts the total number of orbitals required to reach a given level of occupation and, thus, a stipulated precision. Levels of occupation as low as , and below, must be considered to get converged results better than 1%, making high-temperature simulations very time consuming beyond a few tens of eV. After assessing the predictions of the model against previous results and Abinit minimizations, we show how the extended FPMD method of Zhang et al. [Phys. Plasmas 23, 042707 (2016)] allows us to bypass these strong constraints on the number of orbitals at high temperature.- 1 December 2020
- Published by AIP Publishing in Physics of Plasmas
- Vol. 27 (12) , 122706
Requirements for very high temperature Kohn–Sham DFT simulations and how to bypass them
In high-temperature density functional theory simulations (from tens of eV to keV), the total number of Kohn–Sham orbitals is a critical quantity to get accurate results. To establish the relationship between the number of orbitals and the level of occupation of the highest energy orbital, we derived a model based on the homogeneous electron gas properties at finite temperature. This model predicts the total number of orbitals required to reach a given level of occupation and, thus, a stipulated precision. Levels of occupation as low as , and below, must be considered to get converged results better than 1%, making high-temperature simulations very time consuming beyond a few tens of eV. After assessing the predictions of the model against previous results and Abinit minimizations, we show how the extended FPMD method of Zhang et al. [Phys. Plasmas 23, 042707 (2016)] allows us to bypass these strong constraints on the number of orbitals at high temperature.- Open Access
Requirements for very high temperature Kohn-Sham density functional simulations and how to bypass them
In high temperature density functional theory simulations (from tens of eV to keV) the total number of Kohn-Sham orbitals is a critical quantity to get accurate results. To establish the relationship between the number of orbitals and the level of occupation of the highest orbital, we derived a model based on the electron gas properties at finite temperature. This model predicts the total number of orbitals required to reach a given level of occupation and thus a stipulated precision. Levels of occupation as low as 10-4, and below, must be considered to get converged results better than 1%, making high temperature simulations very time consuming beyond a few tens of eV. After assessing the predictions of the model against previous results and ABINIT minimizations, we show how the extended FPMD method of Zhang et al. [PoP 23 042707, 2016] allows to bypass these strong constraints on the number of orbitals at high temperature.
Open AccessRequirements for very high temperature Kohn-Sham density functional simulations and how to bypass them
In high temperature density functional theory simulations (from tens of eV to keV) the total number of Kohn-Sham orbitals is a critical quantity to get accurate results. To establish the relationship between the number of orbitals and the level of occupation of the highest orbital, we derived a model based on the electron gas properties at finite temperature. This model predicts the total number of orbitals required to reach a given level of occupation and thus a stipulated precision. Levels of occupation as low as 10-4, and below, must be considered to get converged results better than 1%, making high temperature simulations very time consuming beyond a few tens of eV. After assessing the predictions of the model against previous results and ABINIT minimizations, we show how the extended FPMD method of Zhang et al. [PoP 23 042707, 2016] allows to bypass these strong constraints on the number of orbitals at high temperature.
- 18 March 2020
- Published by American Physical Society (APS) in Physical Review E
- Vol. 101 (3) , 033207
Static and dynamic properties of multi-ionic plasma mixtures
Complex plasma mixtures with three or more components are often encountered in astrophysics or in inertial confinement fusion (ICF) experiments. For mixtures containing species with large differences in atomic number Z, the modeling needs to consider at the same time the kinetic theory for low-Z elements combined with the theory of strongly coupled plasma for high-Z elements, as well as all the intermediate situations that can appear in multicomponent systems. For such cases, we study the pair distribution functions, self-diffusions, mutual diffusion, and viscosity for ternary mixtures at extreme conditions. These quantities can be produced from first principles using orbital free molecular dynamics at the computational expense of very intensive simulations to reach good statistics. Utilizing the first-principles results as reference data, we assess the merit of a global analytic model for transport coefficients, “pseudo-ions in jellium” (PIJ), based on an isoelectronic assumption (iso-). With a multicomponent hypernetted-chain integral equation, we verify the quality of the iso- prescription for describing the static structure of the mixtures. This semianalytical modeling compares well with the simulation results and allows one to consider plasma mixtures not accessible to simulations. Applications are given for the mix of materials in ICF experiments. A reduction of a multicomponent mixture to an effective binary mixture is also established in the hydrodynamic limit and compared with PIJ estimations for ICF relevant mixtures.- 18 March 2020
- Published by American Physical Society (APS) in Physical Review E
- Vol. 101 (3) , 033207
Static and dynamic properties of multi-ionic plasma mixtures
Complex plasma mixtures with three or more components are often encountered in astrophysics or in inertial confinement fusion (ICF) experiments. For mixtures containing species with large differences in atomic number Z, the modeling needs to consider at the same time the kinetic theory for low-Z elements combined with the theory of strongly coupled plasma for high-Z elements, as well as all the intermediate situations that can appear in multicomponent systems. For such cases, we study the pair distribution functions, self-diffusions, mutual diffusion, and viscosity for ternary mixtures at extreme conditions. These quantities can be produced from first principles using orbital free molecular dynamics at the computational expense of very intensive simulations to reach good statistics. Utilizing the first-principles results as reference data, we assess the merit of a global analytic model for transport coefficients, “pseudo-ions in jellium” (PIJ), based on an isoelectronic assumption (iso-). With a multicomponent hypernetted-chain integral equation, we verify the quality of the iso- prescription for describing the static structure of the mixtures. This semianalytical modeling compares well with the simulation results and allows one to consider plasma mixtures not accessible to simulations. Applications are given for the mix of materials in ICF experiments. A reduction of a multicomponent mixture to an effective binary mixture is also established in the hydrodynamic limit and compared with PIJ estimations for ICF relevant mixtures.- 17 February 2019
- Published by Wiley in Contributions to Plasma Physics
- Vol. 59 (4-5)
Enhancement factor of nuclear reactions in partially ionized plasmas and asymmetric mixtures
When hydrogen is mixed with heavy (high‐Z) elements, even as traces, such as iron in the sun, the plasma mixture transits from a weakly coupled state to the intermediate coupling regime of simultaneous weak and strong couplings due to charge asymmetry. In those circumstances, partial ionization is an important aspect to consider. We present a global approach for evaluating enhancement factors for thermonuclear reactions in such mixtures. We grounded our approach on extensive orbital free molecular dynamics (OFMD) simulations of hydrogen‐silver mixtures, chosen as a prototype of hydrogen—high‐Zmixtures, in a large range of temperature (100 < T < 1600 eV). By comparing a series of OFMD simulations to hyper‐netted chain calculations of effective binary ionic mixtures (eBIM), we set a general procedure for computing enhancement factors. The electron screening contribution is also included implicitly in the definition of the effective ionizations within the average atom framework. The agreement between the pair distribution functions of OFMD and eBIM validates a prescription in which each average atom representing a given species shares the same external electron density with the others (iso‐nerule). We checked that an interpolation formula between weak and strong couplings in BIM, due to Chugunov and DeWitt, is accurate enough to address the limit of extreme dilution of a heavy element.
- 17 February 2019
- Published by Wiley in Contributions to Plasma Physics
- Vol. 59 (4-5)
Enhancement factor of nuclear reactions in partially ionized plasmas and asymmetric mixtures
When hydrogen is mixed with heavy (high‐Z) elements, even as traces, such as iron in the sun, the plasma mixture transits from a weakly coupled state to the intermediate coupling regime of simultaneous weak and strong couplings due to charge asymmetry. In those circumstances, partial ionization is an important aspect to consider. We present a global approach for evaluating enhancement factors for thermonuclear reactions in such mixtures. We grounded our approach on extensive orbital free molecular dynamics (OFMD) simulations of hydrogen‐silver mixtures, chosen as a prototype of hydrogen—high‐Zmixtures, in a large range of temperature (100 < T < 1600 eV). By comparing a series of OFMD simulations to hyper‐netted chain calculations of effective binary ionic mixtures (eBIM), we set a general procedure for computing enhancement factors. The electron screening contribution is also included implicitly in the definition of the effective ionizations within the average atom framework. The agreement between the pair distribution functions of OFMD and eBIM validates a prescription in which each average atom representing a given species shares the same external electron density with the others (iso‐nerule). We checked that an interpolation formula between weak and strong couplings in BIM, due to Chugunov and DeWitt, is accurate enough to address the limit of extreme dilution of a heavy element.