SMSeth C. Moran

Seth C. Moran

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Seth C. Moran has a total of 90 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Recent Expansion of the Cascades Volcano Observatory Geophysical Network at Mount Rainier for Improved Volcano and Lahar Monitoring

    by Rebecca L. Kramer, Weston A. Thelen, Alexandra M. Iezzi, Seth C. Moran, Benjamin A. Pauk

    The U.S. Geological Survey Cascades Volcano Observatory (CVO) recently expanded its continuous geophysical monitoring at Mount Rainier, an active stratovolcano in Washington state. CVO monitors volcanoes in Oregon, Washington, and Idaho to characterize volcanic systems and detect unrest. Mount Rainier has a history of large lahar occurrences in the Holocene, including at least one that may not have been associated with volcanic activity. Pierce County, Washington, is one of the areas most at risk from large lahars. In the 1990s, CVO collaborated with Pierce County to install the Rainier lahar detection system (RLDS), an automated system designed to detect large lahars in high-risk drainages and mitigate hazards to heavily populated areas. The system was designed to detect lahars within 5–10 min of their occurrence and alert authorities of the need to evacuate populated low-lying areas before lahar arrival. In addition, CVO and the Pacific Northwest Seismic Network (PNSN) maintained and expanded a network of seismic and geodetic monitoring stations on and near the edifice to provide adequate volcano monitoring capabilities. Since 2016, CVO has worked to upgrade the existing RLDS and to expand its capabilities into other drainages around Mount Rainier. This expansion includes installation of 25 new broadband seismic stations with many including infrasound along high-risk drainages, as well as support for equipment upgrades at existing PNSN and CVO volcano monitoring sites. All stations transmit continuous, near-real-time data with dramatically improved spatial coverage for volcano monitoring and lahar hazard mitigation compared to the previous system.


  • Open Access

    Seismic techniques and suggested instrumentation to monitor volcanoes

    by Weston A. Thelen, John J. Lyons, Aaron G. Wech, Seth C. Moran, Matthew M. Haney, Ashton F. Flinders

    Changes in the pressure or location of magma can stress or break surrounding rocks and trigger flow of nearby waters and gases, causing seismic signals, such as discrete earthquakes and tremor. These phenomena are types of seismic unrest that commonly precede eruption and can be used to forecast volcanic activity. Mass movements at the surface, including avalanches, debris flows, and lahars, may also generate seismic signals that are specifically addressed in chapter H, this volume (Thelen and others, 2024). Our focus in this chapter is to determine the levels of instrumentation recommended to produce high-quality, well-constrained seismic observations important for early warning of impending eruptions, detecting changes in ongoing eruptions, and characterizing other hazardous volcanic events.There are emerging techniques and new types of instrumentation, such as distributed acoustic sensing or rotational seismometers, that we do not consider here. These types of instrumentation show promise for monitoring but still require maturation before being considered more generally in volcano monitoring.Most of the capabilities mentioned below are universal for all types of volcanic systems, although some are best applied to stratovolcanoes with an apical single vent. In some settings, such as calderas or shield volcanoes, we must broaden coverage to include multiple possible storage regions or vent locations. As an example, Thelen (2014) discretized the long rift zones of shield volcanoes in Hawaiʻi as a set of evenly spaced “vents.” In this construct, each vent comes with recommendations, and several thousand network configurations were simulated to assess the effect on network quality levels and to determine the most efficient network design. The same process could be applied in a caldera setting or a volcanic field, where an evenly spaced grid of potential vents is considered. Localized recommendations for each unique system are beyond the scope of this report and left up to local experts to assess based on the conditions, restrictions, and requirements of each volcano.


  • Open Access

    Monitoring lahars

    by Weston A. Thelen, John J. Lyons, Alexandra M. Iezzi, Seth C. Moran

    Lahars, or debris flows that originate from a volcano (Pierson and Scott, 1985; Pierson, 1995), are among the most destructive, far-reaching, and persistent hazards on stratovolcanoes. Lahars may be triggered by syneruptive rapid melting of snow and ice, lake breakouts, or heavy rains in conjunction with large eruptive columns. Alternatively, lahars can follow eruptions, when clastic deposits are mobilized by heavy rainfall or lake breakouts, occurring sporadically for years to decades after large eruptions. Some lahars can travel many tens of kilometers in river drainages stemming from volcanoes, as during the 1980 eruption of Mount St. Helens (Washington) (for example, Janda and others, 1981), recent eruptions of Redoubt Volcano (Alaska) (fig. H1; Dorava and Meyer, 1994; Waythomas and others, 2013), and the 1991 eruption of Mount Pinatubo (Philippines) (Major and others, 1996; Pierson and others, 1996). Large lahars are less likely in the absence of eruptive activity, but still possible. The Electron Mudflow at Mount Rainier (approximately A.D. 1500), Wash., is an example of a potential noneruptive lahar, likely initiated by a spontaneous collapse of weak rock, that reached the Puget Lowland after it flowed dozens of kilometers without a recognized eruptive trigger (Sisson and Vallance, 2009).The extreme hazard posed by lahars was demonstrated tragically by the 1985 Nevado del Ruiz (Colombia) catastrophe that claimed the lives of more than 20,000 people (Naranjo and others, 1986). The potential to provide warnings of minutes to hours in advance of lahar arrival in a populated area (for example, Voight, 1990) is a strong reason to provide special monitoring attention to the hazard. Populated river valleys are located downstream from many very high threat and high threat volcanoes, and these areas could be affected by lahars (for example, Hoblitt and others, 1998). The volume and mobility of lahars are two characteristics that can influence the extent of downstream effects (for example, George and others, 2022). The flows that reach the farthest downstream are mobile and voluminous. Additionally, entrainment of material as a lahar travels downstream may increase the volume, and a lahar that starts small may grow to a destructive size under certain conditions.Increasingly, stratovolcanoes host recreational enthusiasts who could be affected by relatively localized geologic hazards, such as rainfall-induced debris flows, glacial outburst floods, rockfalls, and avalanches. These types of events can be common on many volcanoes, occurring seasonally in the case of debris flows and several times per year in the case of avalanches and rockfalls (for example, Allstadt and others, 2018). Many very high threat stratovolcanoes, especially within the contiguous United States, have low eruption frequencies (less than once per century), such that monitoring networks could be used more often for detection and characterization of small surface flows than for identification of volcanic unrest. Such information can be used to validate avalanche forecasts, inform rescue efforts, or notify other agencies of potentially damaged infrastructure (for example, roads, powerlines, or trails). Note that although many of these smaller surface flows create seismic and infrasound waves, the signals are typically highly distorted by the complex volcanic topography and geology. In general, the smaller the flow, the weaker the geophysical signals that it generates, and thus a denser geophysical network is required to study smaller flows (for example, Allstadt and others, 2018).Lahar detection may not be an appropriate or necessary monitoring capability for all volcanoes. Some very high threat volcanoes, like Kīlauea and Mauna Loa, have no lahar hazards currently, and thus no detection, tracking, and characterization capabilities for lahars are needed. At other very high threat volcanoes, such as Pavlof Volcano, Alaska, lahars might be common but pose minimal threat because the volcano is so remote. Ideally, the local observatory would understand the combination of hazard and risk associated with surface flows and assign monitoring and detection capabilities appropriately. Several volcano monitoring techniques (for example, Real-Time Seismic Amplitude Measurement [RSAM], amplitude-based locations, and infrasound array processing) can be adapted to also detect, characterize, and track debris flows, lahars, and other surface flows, so instrumentation installed for detecting volcanic unrest and eruptions can have multiple purposes. The utility of instrumentation for the purpose of monitoring unrest and lahars further justifies the importance and utility of a dense network of monitoring stations, even if the volcano remains quiescent.


  • Open Access

    The U.S. Geological Survey Volcano Science Center’s response plan for significant volcanic events

    by Seth C. Moran, Christina A. Neal, Thomas L. Murray

    This publication describes the U.S. Geological Survey Volcano Science Center (VSC) Response Plan for Significant Volcanic Events (hereinafter referred to as “the plan”) that has been developed for U.S volcano observatories over the past several years in consultation with the lead scientist, or Scientist-in-Charge (SIC), of each of the five U.S. Geological Survey (USGS) volcano observatories. The goal of the plan is to define a standardized management system that ensures the VSC can achieve the following during a volcanic crisis:maintain situational awareness and issue timely warnings and hazard assessments,fulfill internal and external agency requests for information as well as requests from the public,sustain financial and technical support, andgather critical scientific data.The plan addresses situations in which the scale of a response at least temporarily eclipses the response capabilities of a single observatory. The plan features two integrated response structures for managing and carrying out operations within the VSC during a crisis: the Observatory Volcanic Event Response Team (OVERT) and the Center Volcanic Event Response Team (CVERT). The design of these structures reflects lessons learned from past volcanic responses and is influenced by the Incident Command System used by the U.S. Federal Government for managing emergency responses. The plan clarifies expectations regarding the flow of information during a response, summarizes required tasks of the responding observatory and VSC to ensure a successful response, defines response-team roles and responsibilities, and describes the internal communication practices critical for an effective and coordinated response.


  • Open Access

    Ten ways Mount St. Helens changed our world—The enduring legacy of the 1980 eruption

    by Carolyn L. Driedger, Jon J. Major, John S. Pallister, Michael A. Clynne, Seth C. Moran, Elizabeth G. Westby, John W. Ewert

    Mount St. Helens was once enjoyed for its serene beauty and was considered one of America’s most majestic volcanoes because of its perfect cone shape, similar to Japan’s beloved Mount Fuji. Nearby residents assumed that the mountain was solid and enduring. That perception changed during the early spring of 1980. Then, on May 18, 1980, following 2 months of earthquakes and small explosions, the volcano’s over-steepened north flank collapsed in a colossal landslide and triggered a near-horizontal blast, followed by a powerful vertical eruption. The high-speed, rock-filled, and gas-charged blast quickly evolved into a gravitationally driven pyroclastic flow, which leveled millions of trees, stripped them of their branches and bark, and scoured soil from bedrock. The vertical eruption that followed fed a towering plume of ash for more than 9 hours. Winds carried the ash from the volcano and deposited it hundreds of miles away. Lahars (volcanic mudflows) buried river valleys. These catastrophic events caused the worst volcanic disaster in the recorded history of the conterminous United States. The events violently transformed Mount St. Helens and left a lasting impression on the hearts and minds of people living in the Pacific Northwest and beyond.


  • Open Access

    U.S. Geological Survey 2018 Kīlauea Volcano eruption response in Hawai'i—After-action review

    by Dee M. Williams, Vic F. Avery, Michelle L. Coombs, Dale A. Cox, Lief R. Horwitz, Sara K. McBride, Ryan J. McClymont, Seth C. Moran

    First posted May 14, 2020 Regional Director, Alaska U.S. Geological Survey 4210 University Drive Anchorage, Alaska 99508-4560 The 2018 Kīlauea Volcano eruption lasted 107 days, and now ranks as the most destructive event at Kilauea since 1790, and as one of the most costly volcanic disasters in U.S. history. Multiple simultaneous hazard events unfolded, including sustained seismic activity leading to collapse at the summit of Halema'uma'u crater and severe damage to the HVO facility, with additional eruption of lava in the Kīlauea Lower East Rift Zone that progressively grew to a total of 24 fissure openings. In response to the complex and uncertain nature of the eruption, U.S. Geological Survey (USGS) team activities tended to coalesce around several interrelated core functional areas: science operations, emergency management and administration, and external communications. Upon cessation of the eruption, the USGS Hazard Response Executive Committee charged the Alaska Regional Office to lead an After-Action Review team, which focused on two basic questions: (1) what went well, and why?; and (2) what can be improved, and how? The purpose of the After-Action Review is to identify priorities for programmatic or policy improvements that the USGS can feasibly implement to advance strategic preparation for future disasters, and thereby reduce public vulnerabilities. Specifically, the review is intended to help USGS respond even better to the next eruption in Hawai'i or elsewhere by advancing any of the following goals:


  • Open Access

    Shear Velocity Structure From Ambient Noise and Teleseismic Surface Wave Tomography in the Cascades Around Mount St. Helens

    by Kayla J. Crosbie, Geoffrey A. Abers, Michael Everett Mann, Helen A. Janiszewski, Kenneth C. Creager, Carl W. Ulberg, Seth C. Moran

    Mount St. Helens (MSH) lies in the forearc of the Cascades where conditions should be too cold for volcanism. To better understand thermal conditions and magma pathways beneath MSH, data from a dense broadband array are used to produce high‐resolution tomographic images of the crust and upper mantle. Rayleigh‐wave phase‐velocity maps and three‐dimensional images of shear velocity (Vs), generated from ambient noise and earthquake surface waves, show that west of MSH the middle‐lower crust is anomalously fast (3.95 ± 0.1 km/s), overlying an anomalously slow uppermost mantle (4.0–4.2 km/s). This combination renders the forearc Moho weak to invisible, with crustal velocity variations being a primary cause; fast crust is necessary to explain the absent Moho. Comparison with predicted rock velocities indicates that the fast crust likely consists of gabbros and basalts of the Siletzia terrane, an accreted oceanic plateau. East of MSH where magmatism is abundant, middle‐lower crust Vs is low (3.45–3.6 km/s), consistent with hot and potentially partly molten crust of more intermediate to felsic composition. This crust overlies mantle with more typical wave speeds, producing a strong Moho. The sharp boundary in crust and mantle Vs within a few kilometers of the MSH edifice correlates with a sharp boundary from low heat flow in the forearc to high arc heat flow and demonstrates that the crustal terrane boundary here couples with thermal structure to focus lateral melt transport from the lower crust westward to arc volcanoes.


  • Open Access

    Imaging Subduction Beneath Mount St. Helens: Implications for Slab Dehydration and Magma Transport

    by Michael Everett Mann, Geoffrey A. Abers, Kayla Crosbie, Kenneth Creager, Carl Ulberg, Seth Moran, Stéphane Rondenay

    Mount St. Helens (MSH) is anomalously 35–50 km trenchward of the main Cascade arc. To elucidate the source of this anomalous forearc volcanism, the teleseismic‐scattered wavefield is used to image beneath MSH with a dense broadband seismic array. Two‐dimensional migration shows the subducting Juan de Fuca crust to at least 80‐km depth, with its surface only 68 ± 2 km deep beneath MSH. Migration and three‐dimensional stacking reveal a clear upper‐plate Moho east of MSH that disappears west of it. This disappearance is a result of both hydration of the mantle wedge and a westward change in overlying crust. Migration images also show that the subducting plate continues without break along strike. Combined with low temperatures inferred for the mantle wedge, this geometry greatly limits possible source regions for mantle melts that contribute to MSH magmas and requires lateral migration over large distances.


  • Failed magmatic eruptions: late-stage cessation of magma ascent

    by Seth C. Moran, Chris Newhall, Diana C. Roman


  • Seismic and acoustic recordings of an unusually large rockfall at Mount St. Helens, Washington

    by S. C. Moran, R. S. Matoza, M. A. Garcés, M. A. H. Hedlin, D. Bowers, W. E. Scott, D. R. Sherrod, J. W. Vallance

    On 29 May 2006 a large rockfall off the Mount St. Helens lava dome produced an atmospheric plume that was reported by airplane pilots to have risen to 6,000 m above sea level and interpreted to be a result of an explosive event. However, subsequent field reconnaissance found no evidence of a ballistic field, indicating that there was no explosive component. The rockfall produced complex seismic and infrasonic signals, with the latter recorded at sites 0.6 and 13.4 km from the source. An unusual, very long‐period (50 s) infrasonic signal was recorded, a signal we model as the result of air displacement. Two high‐frequency infrasonic signals are inferred to result from the initial contact of a rock slab with the ground and from interaction of displaced air with a depression at the base of the active lava dome.