Soheila Yaghmaei
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Soheila Yaghmaei has a total of 151 co-authors. Here are the top co-authors by number of shared publications:
- Seyyed Mohammad Mousavi
Biotechnology Group, Chemical Engineering Department, Tarbiat Modares University, Tehran, Iran
20 shared publications Mohammad Mahdi Mardanpour
13 shared publicationsA. Jafari
Laboratory of Engineering Thermodynamics, Department of Energy and Environmental Technology, Lappeenranta University of Technology, Lappeenranta, Finland
10 shared publicationsM. Vossoughi
Department of Chemical and Petroleum Engineering, Sharif University of Technology, Tehran, Iran
8 shared publicationsZahra Ghobadi Nejad
Biochemical and Bioenvironmental Research Center Sharif University of Technology Tehran Iran
7 shared publications- Ayyoob Arpanaei
Scion
6 shared publications
Latest Publications
- 1 April 2026
- Published by Wiley in Water and Environment Journal
- Vol. 40 (3) , 495-509
A Comparative Study of Fenton‐Based Advanced Oxidation Processes for PVC and LDPE Microplastics Removal
The presence of plastics in the environment, particularly in micro and nano forms, poses significant environmental and health risks. This study investigated Fenton‐based advanced oxidation processes (AOPs), including Fenton, electro‐Fenton and Fered‐Fenton, for removing two common microplastics: polyvinyl chloride (PVC) and low‐density polyethylene (LDPE). The experiments were conducted at room temperature and a pH of 3, under the conditions of 0.1 g of microplastics, 100 mL of water, 1.5 mL of H 2 O 2 and 1.5 mL of Fe 2+ (concentration: 0.2 M), with a constant voltage of 10 kV and a current of 5 mA, conducting four cycles lasting 5 h. The results indicate that the Fered‐Fenton process demonstrated the highest removal rates, achieving 30.6% for PVC and 27.4% for LDPE compared to 22.78% and 19.9% for the Fenton process and 25.4% and 22.4% for the electro‐Fenton process. These findings indicate higher removal percentages for PVC and LDPE compared to other studies.
- 1 April 2026
- Published by Wiley in Water and Environment Journal
- Vol. 40 (3) , 495-509
A Comparative Study of Fenton‐Based Advanced Oxidation Processes for PVC and LDPE Microplastics Removal
The presence of plastics in the environment, particularly in micro and nano forms, poses significant environmental and health risks. This study investigated Fenton‐based advanced oxidation processes (AOPs), including Fenton, electro‐Fenton and Fered‐Fenton, for removing two common microplastics: polyvinyl chloride (PVC) and low‐density polyethylene (LDPE). The experiments were conducted at room temperature and a pH of 3, under the conditions of 0.1 g of microplastics, 100 mL of water, 1.5 mL of H 2 O 2 and 1.5 mL of Fe 2+ (concentration: 0.2 M), with a constant voltage of 10 kV and a current of 5 mA, conducting four cycles lasting 5 h. The results indicate that the Fered‐Fenton process demonstrated the highest removal rates, achieving 30.6% for PVC and 27.4% for LDPE compared to 22.78% and 19.9% for the Fenton process and 25.4% and 22.4% for the electro‐Fenton process. These findings indicate higher removal percentages for PVC and LDPE compared to other studies.
- 10 February 2026
- Published by Elsevier in Science of The Total Environment
- Vol. 1018, 181357
Improving bioleaching of Cu and Zn from e-waste with graphene and activated carbon with Acidithiobacillus bacteria
- 10 February 2026
- Published by Elsevier in Science of The Total Environment
- Vol. 1018, 181357
Improving bioleaching of Cu and Zn from e-waste with graphene and activated carbon with Acidithiobacillus bacteria
- 26 November 2025
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 23 (1) , 28
Enhancement of biological treatment of levofloxacin through electrochemical oxidation as a pretreatment
- 26 November 2025
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 23 (1) , 28
Enhancement of biological treatment of levofloxacin through electrochemical oxidation as a pretreatment
- 12 June 2023
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 459, 131833
Biological treatment of triclosan using a novel strain of Enterobacter cloacae and introducing naphthalene dioxygenase as an effective enzyme
- 12 June 2023
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 459, 131833
Biological treatment of triclosan using a novel strain of Enterobacter cloacae and introducing naphthalene dioxygenase as an effective enzyme
- 25 January 2023
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 11 (2)
Developing a self-powered microfluidic microbial electrolysis cell (MEC) for converting oxalate into hydrogen
- 25 January 2023
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 11 (2)
Developing a self-powered microfluidic microbial electrolysis cell (MEC) for converting oxalate into hydrogen
- 24 January 2022
- Published by Elsevier in Journal of Environmental Management
- Vol. 307, 114524
Fungal bioleaching of e-waste utilizing molasses as the carbon source in a bubble column bioreactor
- 24 January 2022
- Published by Elsevier in Journal of Environmental Management
- Vol. 307, 114524
Fungal bioleaching of e-waste utilizing molasses as the carbon source in a bubble column bioreactor
- 22 September 2021
- Published by Springer Nature in Journal of Material Cycles and Waste Management
- Vol. 24 (1) , 83-96
Evaluation of Aspergillus niger and Penicillium simplicissimum for their ability to leach Zn–Ni–Cu from waste mobile phone printed circuit boards
- 22 September 2021
- Published by Springer Nature in Journal of Material Cycles and Waste Management
- Vol. 24 (1) , 83-96
Evaluation of Aspergillus niger and Penicillium simplicissimum for their ability to leach Zn–Ni–Cu from waste mobile phone printed circuit boards
- Open Access
- 12 July 2021
- Published by Springer Nature in Scientific Reports
- Vol. 11 (1) , 1-13
Fabrication of the macro and micro-scale microbial fuel cells to monitor oxalate biodegradation in human urine
This study presented the fabrication of macro and micro-scale microbial fuel cells (MFCs) to generate bioelectricity from oxalate solution and monitor the biodegradation in a micro-scale MFC for the first time. The maximum generated power density of 44.16 W m−3 in the micro-scale MFC elucidated its application as a micro-sized power generator for implantable medical devices (IMDs). It is also worthwhile noting that for the macro-scale MFC, the significant amounts of open circuit voltage, oxalate removal, and coulombic efficiency were about 935 mV, 99%, and 44.2%, respectively. These values compared to previously published studies indicate successful oxalate biodegradation in the macro-scale MFC. Regarding critical challenges to determine the substrate concentration in microfluidic outlets, sample collection in a suitable time and online data reporting, an analogy was made between macro and micro-scale MFCs to elicit correlations defining the output current density as the inlet and the outlet oxalate concentration. Another use of the system as an IMD is to be a platform to identify urolithiasis and hyperoxaluria diseases. As a versatile device for power generation and oxalate biodegradation monitoring, the use of facile and cheap materials (< $1.5 per device) and utilization of human excreta are exceptional features of the manufactured micro-scale MFC.
- 12 July 2021
- Published by Springer Nature in Scientific Reports
- Vol. 11 (1) , 1-13
Open AccessFabrication of the macro and micro-scale microbial fuel cells to monitor oxalate biodegradation in human urine
This study presented the fabrication of macro and micro-scale microbial fuel cells (MFCs) to generate bioelectricity from oxalate solution and monitor the biodegradation in a micro-scale MFC for the first time. The maximum generated power density of 44.16 W m−3 in the micro-scale MFC elucidated its application as a micro-sized power generator for implantable medical devices (IMDs). It is also worthwhile noting that for the macro-scale MFC, the significant amounts of open circuit voltage, oxalate removal, and coulombic efficiency were about 935 mV, 99%, and 44.2%, respectively. These values compared to previously published studies indicate successful oxalate biodegradation in the macro-scale MFC. Regarding critical challenges to determine the substrate concentration in microfluidic outlets, sample collection in a suitable time and online data reporting, an analogy was made between macro and micro-scale MFCs to elicit correlations defining the output current density as the inlet and the outlet oxalate concentration. Another use of the system as an IMD is to be a platform to identify urolithiasis and hyperoxaluria diseases. As a versatile device for power generation and oxalate biodegradation monitoring, the use of facile and cheap materials (< $1.5 per device) and utilization of human excreta are exceptional features of the manufactured micro-scale MFC.
- 1 January 2021
- Published by Maad Rayan Publishing Company in Environmental Health Engineering and Management
- Vol. 8 (1) , 25-32
Azo dye removal via surfactant-assisted polyvinylidene fluoride membrane
Background: Recently, concerns have been raised regarding the environmental and public health safety of azo dyes, the most widely used synthetic dyes. The membrane technique has been introduced as one of the efficient methods for dye removal treatments. Polyvinylidene fluoride (PVDF) membrane manipulated by surfactants was studied for removal of the azo dye, carmoisine. Methods: PVDF membrane was prepared via non-solvent-induced phase separation (NIPS) and used to remove the azo dye, carmoisine. Three nonionic surfactants including Tween 20, Tween 60, and Tween 80 were used individually as additives in casting solutions to improve PVDF membrane properties. Results: Fourier-transform infrared spectroscopy (FTIR) demonstrated the presence of functional groups of carbonyl (C=O) and hydroxyl (OH), assigned to Tween molecules, in the membrane chemical structure. All Tween species caused a decrease in the surface hydrophobicity of PVDF membranes illustrated by the reduced contact angles. Each Tween at a 2% concentration in the dope solution led to an increase in the pore-size of PVDF membranes, which was estimated by scanning electron microscopy (SEM). However, this impact was reversed at Tween concentrations of 4%. Membranes were assessed for dye removal efficiency and permeate flux in a cross-flow system. Permeability of PVDF membranes improved (~78%) with adding Tween 80 at a concentration of 2%. Tween 60 at a 2% concentration resulted in a ~45% increase in dye removal efficiency of PVDF membranes. And, atomic force microscopy (AFM) showed that Tween 60 increased membrane surface roughness. Conclusion: Surfactant-mediated changes in the surface properties of PVDF membrane improved dye removal efficacy.
- 1 January 2021
- Published by Maad Rayan Publishing Company in Environmental Health Engineering and Management
- Vol. 8 (1) , 25-32
Azo dye removal via surfactant-assisted polyvinylidene fluoride membrane
Background: Recently, concerns have been raised regarding the environmental and public health safety of azo dyes, the most widely used synthetic dyes. The membrane technique has been introduced as one of the efficient methods for dye removal treatments. Polyvinylidene fluoride (PVDF) membrane manipulated by surfactants was studied for removal of the azo dye, carmoisine. Methods: PVDF membrane was prepared via non-solvent-induced phase separation (NIPS) and used to remove the azo dye, carmoisine. Three nonionic surfactants including Tween 20, Tween 60, and Tween 80 were used individually as additives in casting solutions to improve PVDF membrane properties. Results: Fourier-transform infrared spectroscopy (FTIR) demonstrated the presence of functional groups of carbonyl (C=O) and hydroxyl (OH), assigned to Tween molecules, in the membrane chemical structure. All Tween species caused a decrease in the surface hydrophobicity of PVDF membranes illustrated by the reduced contact angles. Each Tween at a 2% concentration in the dope solution led to an increase in the pore-size of PVDF membranes, which was estimated by scanning electron microscopy (SEM). However, this impact was reversed at Tween concentrations of 4%. Membranes were assessed for dye removal efficiency and permeate flux in a cross-flow system. Permeability of PVDF membranes improved (~78%) with adding Tween 80 at a concentration of 2%. Tween 60 at a 2% concentration resulted in a ~45% increase in dye removal efficiency of PVDF membranes. And, atomic force microscopy (AFM) showed that Tween 60 increased membrane surface roughness. Conclusion: Surfactant-mediated changes in the surface properties of PVDF membrane improved dye removal efficacy.