OKOlga Krivenko

Olga Krivenko

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Olga Krivenko has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Features of Finite Element Modeling for Buckling Analysis of Elastic Shells with Inhomogeneous Structure under Thermomechanical Loads

    by Olga Krivenko, Petro Lizunov, Oleksandr Kalashnikov

    The method for studying the behavior of elastic inhomogeneous shells is based on geometrically nonlinear relationships of the three-dimensional theory of thermoelasticity, the principles of the finite element moment scheme, and the use of a modifiable universal 3d finite element with additional variable parameters. For the analysis of geometrically nonlinear deformation, buckling, post-buckling behavior, and natural vibrations of shells under static thermomechanical loading, an integral approach is employed. A comprehensive study of the stability and natural vibrations of shells subjected to static thermomechanical loading is implemented using a stepwise algorithm. A distinctive feature of the method and the algorithm developed on its basis is the capability to accurately analyze both the pre-buckling and post-buckling states of shell deformation with various thickness features, including ribs, channels, etc. The specificity of the method and algorithm lies in the adopted methodology for prescribing thermomechanical loading as a function. This enables the definition of various loading regimes and the description of complex combined thermomechanical effects on the structure that may be close to real operating conditions. In addition, the developed method provides the capability, in the analysis of nonlinear deformation and buckling of shells to determine solution branching points and to trace adjacent equilibrium branches in the pre-buckling domain. The features of the method and algorithm are demonstrated through a series of specially selected benchmark problems.

  • Open Access

    Buckling analysis of elastic thin shells with stepwise variable thickness under static thermomechanical effects

    by Olga Krivenko, Petro Lizunov, Oleksandr Kalashnikov

    The results of a comprehensive analysis of elastic shell behavior under static thermomechanical loads are presented. The study focuses on geometrically nonlinear deformation, buckling, and natural vibrations of shells. Special attention is given to the identification of bifurcation points in the pre-buckling domain of shell deformation.The proposed comprehensive method is implemented as a two-stage algorithm. At each step of the thermomechanical loading, it combines the solution of the geometrically nonlinear static problem for the shell with a modal analysis at the same step. This approach allows the determination of critical states according to both the static criterion (maximum point of the load–deflection curve) and the dynamic criterion (load at which the lowest natural frequency of the shell becomes zero). The method is based on the geometrically nonlinear theory of thermoelasticity, the moment scheme of finite elements, and a universal three-dimensional finite element. We apply the methodology of introducing small non-symmetric perturbations into the initial geometry of the midsurface of the shell to determine bifurcation points iin the pre-buckling domain. This approach enables tracing new solution branches corresponding to adjacent forms of buckling. The presented numerical examples confirm the accuracy, universality, and effectiveness of the proposed method.

  • Open Access

    Investigation of nonlinear deformation, buckling and natural vibrations of elastic shells under thermomechanical loads using a universal three-dimensional finite element

    by Olga Krivenko, Petro Lizunov

    The article presents the fundamentals and features of the method for solving static problems of nonlinear deformation, buckling, post-buckling behavior and natural vibrations of a wide class of thin elastic inhomogeneous shells of various shapes and structures under the action of thermomechanical loads. The method is developed from the unified positions of the three-dimensional geometrically nonlinear theory of thermoelasticity based on the finite element method. A universal 3D finite element is used. The distinctive feature of the finite element is the presence of its additional variable parameters. This approach allowed for the use of a single universal finite element in all sections when modeling shells with different inhomogeneities. On this basis, a unified model has been developed that takes into account the geometric features of the structural elements and the multilayer structure of a material of the thin shells (constant or piecewise variable thickness, ribs, cover plates, channels, holes, sharp bends in the middle surface, layers, etc.). The algorithm for solving the shell buckling problem finds the branching points and allows obtaining adjacent deformation modes in their neighborhood. A method for the integrated solution of problems of stability and natural vibrations of shells under the action of thermomechanical loads has been developed. Based on this approach, the loss of stability is determined by static and dynamic criteria. The efficiency of the method is demonstrated by a numerical example. The method is used to identify the branching point of the solution on the load-deflection curve for panels of different curvatures.

  • Open Access

    Modal analysis of a thin coupled composite shell

    by Olga Krivenko, Petro Lizunov, Anton Polianskyi, Oleksandr Kalashnikov

    The results of the study of natural vibrations of a coupled shell of revolution are presented. The shell is a spherically biconical structure that has sharp bends in the mid-surface at the junction of different shapes. The material is a unidirectional fibrous carbon/epoxy composite. The shell structure, by its geometric shape and material parameterss, is an approximate model of the fairing of the launch vehicle. The modal analysis of a thin elastic shell is based on the use of a finite element model of a inhomogeneous shell and the application of a universal 3D finite element. The governing finite-element equations are constructed using a moment scheme of finite elements. The universal finite element is based on a standard isoparametric 3D finite element with polylinear shape functions for coordinates and displacements. It is characterized by the presence of additional variable parameters. Two nonclassical hypotheses are used to describe the features of the stress-strain state of a thin inhomogeneous shell. The static hypothesis of the constant of compressive stresses throughout the thickness of the shell layer is used. The kinematic hypothesis of deformed straight line is used, which is not necessarily normal to the mid-surface of the shell. The hypothesis allows us to join three-dimensional finite elements, keeping compatibility of the coordinates and displacements, and naturally modeling sharp bends. This phenomenon is inherent, for example, to folded and coupled (combined) shells. The performed modal analysis of the spherical biconical structure demonstrates the effectiveness of the method. Based on the universality of the approach, the method can be applied in studying the behavior of structures whose shell elements are made of different materials.

  • Open Access

    Universal three-dimensional finite element for analyzing of elastic inhomogeneous shells under thermomechanical loads

    by Oleksandr Kalashnikov, Olga Krivenko, Petro Lizunov

    The work is devoted to the development of a new modification of the finite element intended for the calculation of inhomogeneous composite shells of thin and medium thickness. The element is constructed on the basis of a universal three-dimensional isoparametric 8-node multilayer finite element of a continuous medium. The layers of the modified finite element are made of composite materials reinforced with continuous unidirectional fibers. Within the framework of a finite element model of a multilayer shell of stepwise variable thickness, a technique for modeling the properties of a unidirectional fibrous composite material has been developed, based on a method for structuring material inhomogeneities iby thickness and by plan. The shell can consist of an arbitrary number of layers of varying thickness bonded into a single piece. Each layer can have its own type of material: traditional or composite. Effective physical and mechanical characteristics of the layer material are determined using known micromechanical methods for predicting the thermoelastic constants of a fiber composite through the known physical characteristics of the matrix and fiber. The fibrous material of the layer is presented as homogeneous transversely isotropic with planes of isotropy normal to the direction of reinforcement. Additional variable parameters of the "basic" universal finite element are supplemented with new attributes that determine the thermoelastic properties of the composite components. The new parameters are related to the choice of the type of fibrous composite material in the layer of the finite element, to the setting of structural micromechanical parameters of its components, and to the setting of the reinforcement orientation angle. This allows the calculations to use both traditional and fiber-composite materials in layers of inhomogeneous shells. Numerical examples demonstrate the effectiveness of the developed approach.

  • Open Access

    The influence of geometrical shape on the buckling of thin-walled axisymmetric shells

    by Ольга Петрівна Кривенко, Petro Lizunov, Oleksandr Kalashnikov, Петро Петрович Лізунов

    The most economical for long span structures are thin-walled covering consisting of shell elements. These include shells of cylindrical, spherical, conical and other shapes. Buckling analysis of thinwalled structures is important in the design of buildings and structures. In this case, the geometric shape of the shell used has a great effect on the critical load. A comparative analysis of the geometrically nonlinear deformation, buckling, and postbuckling behavior of rotation panels of the same v olume under static thermomechanical loading is carried out. Spherical and conical shells having the same thickness, rise and weight are considered. Preheated shells are loaded with uniform external pressure. The calculation method is based on geometrically nonlinear relations of the three-dimensional theory of thermoelasticity without the use of simplifying hypotheses of shell theory and the use of a moment finite element scheme. A universal 3D isoparametric finite element is used. The element allows you to model shells of stepwise variable thickness, with breaks in the middle surface and with other geometric features in thickness. The problem of nonlinear deformation, buckling, and postbuckling behavior of inhomogeneous shells is solved by a combined algorithm that employs the parameter continuation method, a modified Newton–Kantorovich method, and a procedure for automatic correction of algorithm parameters. The method has been justified numerically in the authors' articles. Research has revealed the behavioral features of the compared shallow panels. Найбільш економічним перекриттям для великопрогонових споруд є тонкостінне перекриття, що складається з оболонкових елементів. До них належать оболонки циліндричної, сферичної, конічної та інших форм. Аналіз стійкості конструкції є важливим елементом розрахунку під час проєктування будівель і споруд. При цьому великий вплив на критичне навантаження має геометрична форма оболонки, що використовується. Проведено порівняльний аналіз геометрично нелінійного деформування, стійкості та закритичної поведінки панелей однієї і тієї ж маси при статичному термомеханічному навантаженні. Розглянуто сферичну і конічну оболонки, що мають однакову товщину, висоту та масу. Попередньо нагріті оболонки навантажуються рівномірним зовнішнім тиском. Метод розрахунку заснований на геометрично нелінійних співвідношеннях тривимірної теорії термопружності без використання спрощуючих гіпотез теорії оболонок і використанні моментної схеми скінченних елементів. Застосовується універсальний просторовий ізопараметричний скінченний елемент. Елемент дає змогу моделювати оболонки ступінчасто-змінної товщини, зі зламами серединної поверхні та з іншими геометричними особливостями за товщиною. Задача нелінійного деформування, стійкості та закритичної поведінки неоднорідних оболонок розв’язується за допомогою комбінованого алгоритму, що використовує метод продовження розв’язку за параметром, модифікований метод Ньютона – Канторовича та процедуру автоматичного корегування параметрів алгоритму. Метод чисельно обґрунтовано в статтях авторів. Дослідження виявили особливості у поведінці порівнюваних пологих панелей.


  • Open Access

    Comparative analysis of the stability and natural vibrations of shallow panels under the action of thermomechanical loads

    by Olga Krivenko, Petro Lizunov, Yurii Vorona, Oleksandr Kalashnikov

    The work is a continuation of research devoted to substantiating the reliability of solutions obtained by the finite element method for the analysis of nonlinear deformation, buckling and vibrations of thin elastic shells under the action of thermomechanical loads. The method is based on geometrically nonlinear relations of the three-dimensional theory of thermoelasticity and the principles of the moment finite element scheme. A thin elastic shell of an inhomogeneous structure is modeled by a universal spatial isoparametric finite element. The modal analysis of the shell is implemented at each step of the static thermomechanical load. The subspace iteration method is used to determine the spectrum of the lowest frequencies of natural vibrations of shells. A shallow spherical panel with a square plan is considered. The effect of preheating on the loss of stability and vibrations of an elastic isotropic shell under uniform pressure loading is investigated. The behavior of the shell weakened by two pairs of cross-channels is analyzed. The weakening of the panel by narrow and wide channels, which can be eccentrically located relative to the middle surface of the shell, is considered. The effectiveness and adequacy of the method is confirmed by a comparative analysis of solutions with results obtained using modern multifunctional software systems LIRA-SAPR and SCAD. The features of using the systems for solving the problems under consideration are given. Analysis of the results made it possible to evaluate the possibilities of using these software systems to substantiate the reliability of solutions to certain classes of problems of geometrically nonlinear deformation, buckling and vibrations of elastic shells. Робота є продовженням низки досліджень, присвячених обґрунтуванню достовірності розв’язків, що отримуються за скінченно-елементною методикою дослідження нелінійного деформування, стійкості та коливань тонких пружних оболонок при дії термосилових навантажень. Методика базується на геометрично нелінійних співвідношеннях тривимірної теорії термопружності та положеннях моментної схеми скінченних елементів. Тонка пружна оболонка неоднорідної структури моделюється універсальним просторовим ізопараметричним скінченним елементом. Модальний аналіз оболонки реалізується на кожному кроці статичного термосилового навантаження. Для визначення спектру нижчих частот власних коливань оболонок застосовується метод ітерації підпростору. Розглядається квадратна за планом полога сферична панель. Досліджується вплив попереднього нагріву на стійкість і коливання пружної ізотропної оболонки при навантаженні рівномірним тиском. Аналізується поведінка оболонки, що послаблена двома парами перехресних каналів. Розглядається послаблення панелі вузькими і широкими каналами, які можуть бути ексцентрично розташованими відносно серединної поверхні оболонки. Ефективність та адекватність методу підтверджується порівняльним аналізом розв’язків з результатами, що отримані з використанням сучасних багатофункціональних програмних комплексів ЛІРА-САПР та SCAD. Наведено особливості застосування комплексів до розв’язання розглядуваних задач. Аналіз результатів розрахунків дозволив оцінити межі та можливості використання цих програмних комплексів для обґрунтування достовірності розв’язків певних класів задач геометрично нелінійного деформування, втрати стійкості та коливань пружних оболонок.

  • Open Access

    A Method for Analysis of Nonlinear Deformation, Buckling, and Vibrations of Thin Elastic Shells with Inhomogeneous Structures

    by Olga Krivenko, Petro Lizunov, Yuriy Vorona, Oleksandr Kalashnikov

    The formulation of the problem and the method of analysis of the stress-strain state, buckling and vibrations of elastic shells with inhomogeneous structure are considered. The modal analysis of the shells is performed at each stage of loading. The method allows one to study the behavior of shells with a complex shape of the middle surface, geometric features throughout the thickness, and a multilayer material structure under thermomechanical loading. We approximate a thin shell with one finite element (FE) over the entire thickness. At the same time, we use spatial FEs of the same type to model shell portions with stepwise-varying thickness. So we apply the universal finite element. It is based on an isoparametric 3D element with polylinear shape functions for coordinates and displacements and has additional parameters. The universal finite element can be transformed (modified) to accurately describe portions of the shell with stepped-variable thickness. This element can be eccentrically displaced relative to the average surface of the shell and change its own thickness. The side edges of neighboring FEs are in continuous contact, and the FE allows simulating sharp bends of the shell. The approach is modern and easy to implement, since it is based on the use of the relations of the three-dimensional geometrically nonlinear theory of thermoelasticity and the application of the moment finite-element scheme. The effectiveness of the method is demonstrated on classical test examples. The convergence, accuracy and reliability of the obtained solutions are investigated. Comparison of the results of calculations obtained by the moment finite-element scheme with the data of other authors shows a good agreement between the solutions.


  • Open Access

    Modeling of thermo-elastic properties of composite material in stability problems of multilayered shells

    by Olga P. Krivenko, Petro Lizunov, Yurii Vorona, Oleksandr Kalashnikov

    Тонкостінні конструкції, елементами яких є пластини й оболонки з композитних матеріалів, все ширше застосовуються в різних галузях техніки. Зростаючі потреби практики та впровадження нових композитних матеріалів вимагають подальшого удосконалення методів розрахунку оболонкових конструкцій неоднорідної структури. Тому актуальною є проблема розробки адекватного методу аналізу поведінки оболонок, що виготовлені з композитних матеріалів багатошарової структури. Робота присвячена поширенню розробленого скінченно-елементного методу дослідження геометрично нелінійного деформування та стійкості пружних оболонок на задачі дослідження оболонок, матеріали шарів яких є композитами волокнистої структури. Для моделювання термопружних властивостей неоднорідного матеріалу оболонки застосовується метод структурування неоднорідностей матеріалу за товщиною і в плані оболонки за допомогою універсального просторового скінченного елемента. Визначення ефективних характеристик композитного матеріалу реалізується за структурними мікромеханічними параметрами його компонентів на основі відомих методик прогнозування пружних сталих для даної моделі композитного матеріалу. Багатошаровий скінченний елемент, створений в рамках розробленого підходу, призначений для дослідження тонких пружних оболонок як з традиційних, так і з композитних матеріалів. Наведено результати досліджень багатошарової композитної панелі з використанням різних мікромеханічних методик. Достовірність отриманих розв’язків обґрунтована шляхом порівняння з результатами, що одержані за допомогою програмного комплексу NASTRAN. Нова модифікація скінченного елемента, що розроблена, дає можливість достовірно, з прийнятною для інженерних розрахунків точністю, досліджувати напружено-деформований стан і стійкість багатошарових оболонок із волокнистих композитних матеріалів.

  • Open Access

    Application of the finite element moment scheme to the investigation of thin elastic shells of inhomogeneous structure

    by Ольга Кривенко, Petro Lizunov, Yurii Vorona, Oleksandr Kalashnikov, Петро Лізунов, Юрій Ворона

    The work is devoted to the problem of developing a universal method for studying the deformation, buckling, postbuckling behavior and vibrations of thin and medium-thickness shells of complex shape and structure under the action of mechanical and thermal loads. A wide class of shells is considered: of constant and smooth-variable thickness, with ribs and cover plates, channels and cavities, holes, sharp bends of the mid-surface, and with a multilayer structure of the material. The method is based on the positions of the 3D geometrically nonlinear theory of thermoelasticity without the use of simplifying hypotheses of the theory of shells. The development of the computational model is based on the use of a universal isoparametric spatial finite element with multilinear shape functions, which is the same for all sections of the shell with stepwise variable thickness. The governing equations are constructed in accordance with the requirements of the finite element moment scheme. The mid-surface of the shell’s casing is taken as a single reference surface. All matrices of governing equations for a universal spatial multilayer finite element are obtained in explicit form by analytical integration. This speeds up the execution of calculations in the algorithmic implementation of the method. Such an approach, based on a unified methodology, makes it possible to study the behavior of multilayer shells with different geometric features in terms of thickness under complex thermo-mechanical loading.