Bartosz Krajnik
Bartosz Krajnik has a total of 73 co-authors. Here are the top co-authors by number of shared publications:
Artur Podhorodecki
Department of Experimental Physics, Wrocław University of Science and Technology, wyb. Stanisława Wyspiańskiego 27, 50-370 Wrocław, Poland
3 shared publications- Daniel Horák
Institute of Macromolecular Chemistry
3 shared publications Uliana Kostiv
Institute of Macromolecular Chemistry, Czech Academy of Sciences, Heyrovského nám. 2, 162 06 Prague 6, Czech Republic
3 shared publicationsAgnieszka Noculak
2 shared publicationsAnna Piela
Hener, Wrocław Technology Park, BETA Building, Room 104, Klecińska 125, 54-413, Wrocław, Poland
2 shared publications- Artur Podhorodecki
Department of Experimental Physics, Wroclaw University of Science and Technology, Wybrzeze Wyspianskiego 27, 50-370 Wroclaw, Poland
2 shared publications
Latest Publications
- Open Access
- 11 August 2026
- Published by Elsevier in SSRN Electronic Journal
A Hall-Effect Sensor-Based System for Detecting Queen Bee at the Hive Entrance – a Proof of Concept
The queen bee is the central individual responsible for colony establishment, growth, and survival. Reliable confirmation of successful mating, continued queen presence, and normal reproductive performance is essential for effective colony management. However, existing methods for monitoring queen activity remain limited, creating a need for new technical solutions that enable continuous and non-invasive observation.This study presents the first proof-of-concept of magnetic sensing for automated queen bee monitoring. The proposed system is designed for continuous operation and real-time detection of queen movements at the hive entrance. It is based on an array of Hall-effect sensors and a miniature magnetic tag attached to the queen. A prototype of the system was developed and evaluated under both laboratory and field conditions.Field experiments demonstrated that the system reliably detects queen movements through the hive entrance, enabling the identification of activity associated with mating flights. The results confirm the feasibility of Hall-effect sensing for automated, non-invasive queen bee monitoring and establish magnetic sensing as a promising new measurement modality for precision apiculture.
- 11 August 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessA Hall-Effect Sensor-Based System for Detecting Queen Bee at the Hive Entrance – a Proof of Concept
The queen bee is the central individual responsible for colony establishment, growth, and survival. Reliable confirmation of successful mating, continued queen presence, and normal reproductive performance is essential for effective colony management. However, existing methods for monitoring queen activity remain limited, creating a need for new technical solutions that enable continuous and non-invasive observation.This study presents the first proof-of-concept of magnetic sensing for automated queen bee monitoring. The proposed system is designed for continuous operation and real-time detection of queen movements at the hive entrance. It is based on an array of Hall-effect sensors and a miniature magnetic tag attached to the queen. A prototype of the system was developed and evaluated under both laboratory and field conditions.Field experiments demonstrated that the system reliably detects queen movements through the hive entrance, enabling the identification of activity associated with mating flights. The results confirm the feasibility of Hall-effect sensing for automated, non-invasive queen bee monitoring and establish magnetic sensing as a promising new measurement modality for precision apiculture.
- Open Access
- 17 December 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (51) , 62621-62632
Single-Nanoparticle Luminescence Nanothermometers with Enhanced Sensitivity in Physiological Temperature Range
In this paper, we presented the unique optical properties of monodispersed and uniform luminescence nanothermometers (LNTs), composed of core (NaYF4:Yb3+,Er3+) and core–shell (NaYF4:Yb3+,Er3+@NaYF4) upconverting nanoparticles (UCNPs). We observed a significant influence of the NaYF4 shell on the reduction of the luminescence energy loss, which appeared as a steeper temperature vs. luminescence intensity ratio (I G2/I G1) curve. Moreover, the addition of nonionic IGEPAL CO-520 surfactant and a small amount of deionized water led to the additional improvement of the nanothermometer’s sensitivity, especially in the physiological temperature range between 35 and 40 °C. Such behavior was explained by the physical and chemical interactions of the surfactant molecules with the particle surface, which led to a significant reduction in luminescent energy loss. The developed method of lanthanide-based LNT synthesis and characterization is suitable for the preparation of in vitro nanothermometers and could be applied, for example, in microelectronics or environmental monitoring.
- 17 December 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (51) , 62621-62632
Open AccessSingle-Nanoparticle Luminescence Nanothermometers with Enhanced Sensitivity in Physiological Temperature Range
In this paper, we presented the unique optical properties of monodispersed and uniform luminescence nanothermometers (LNTs), composed of core (NaYF4:Yb3+,Er3+) and core–shell (NaYF4:Yb3+,Er3+@NaYF4) upconverting nanoparticles (UCNPs). We observed a significant influence of the NaYF4 shell on the reduction of the luminescence energy loss, which appeared as a steeper temperature vs. luminescence intensity ratio (I G2/I G1) curve. Moreover, the addition of nonionic IGEPAL CO-520 surfactant and a small amount of deionized water led to the additional improvement of the nanothermometer’s sensitivity, especially in the physiological temperature range between 35 and 40 °C. Such behavior was explained by the physical and chemical interactions of the surfactant molecules with the particle surface, which led to a significant reduction in luminescent energy loss. The developed method of lanthanide-based LNT synthesis and characterization is suitable for the preparation of in vitro nanothermometers and could be applied, for example, in microelectronics or environmental monitoring.
- Top Cited PapersOpen Access
- 18 April 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-9
High-throughput quantum photonic devices emitting indistinguishable photons in the telecom C-band
Single indistinguishable photons at telecom C-band wavelengths are essential for quantum networks and the future quantum internet. However, high-throughput technology for single-photon generation at 1550 nm remained a missing building block to overcome present limitations in quantum communication and information technologies. Here, we demonstrate the high-throughput fabrication of quantum-photonic integrated devices operating at C-band wavelengths based on epitaxial semiconductor quantum dots. Our technique enables the deterministic integration of single pre-selected quantum emitters into microcavities based on circular Bragg gratings. Respective devices feature the triggered generation of single photons with ultra-high purity and record-high photon indistinguishability. Further improvements in yield and coherence properties will pave the way for implementing single-photon non-linear devices and advanced quantum networks at telecom wavelengths.
- 18 April 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-9
Top Cited PapersOpen AccessHigh-throughput quantum photonic devices emitting indistinguishable photons in the telecom C-band
Single indistinguishable photons at telecom C-band wavelengths are essential for quantum networks and the future quantum internet. However, high-throughput technology for single-photon generation at 1550 nm remained a missing building block to overcome present limitations in quantum communication and information technologies. Here, we demonstrate the high-throughput fabrication of quantum-photonic integrated devices operating at C-band wavelengths based on epitaxial semiconductor quantum dots. Our technique enables the deterministic integration of single pre-selected quantum emitters into microcavities based on circular Bragg gratings. Respective devices feature the triggered generation of single photons with ultra-high purity and record-high photon indistinguishability. Further improvements in yield and coherence properties will pave the way for implementing single-photon non-linear devices and advanced quantum networks at telecom wavelengths.
- 13 February 2023
- Published by IOP Publishing in Nanotechnology
- Vol. 34 (17) , 175502
Chip for dielectrophoretic microbial capture, separation and detection II: experimental study
In our previous paper we have modelled a dielectrophoretic force (DEP) and cell particle behavior in a microfluidic channel (Weber MU et al 2023 Chip for dielectrophoretic microbial capture, separation and detection I: theoretical basis of electrode design Nanotechnology this issue). Here we test and confirm the results of our modeling work by experimentally validating the theoretical design constraints of the ring electrode architecture. We have compared and tested the geometry and particle capture and separation performance of the two separate electrode designs (the ring and dot electrode structures) by investigating bacterial motion in response to the applied electric field. We have quantitatively evaluated the electroosmosis (EO) to positive DEP (PDEP) transition in both electrode designs and explained the differences in capture efficiency of the ring and dot electrode systems. The ring structure shows 99% efficiency of bacterial capture both for PDEP and for EO. Moreover, the ring structure shows an over 200 faster bacterial response to the electric field. We have also established that the ring electrode architecture, with appropriate structure periodicity and spacing, results in efficient capture and separation of microbial cells. We have identified several critical design constraints that are required to achieve high efficiency bacterial capture. We have established that the spacing between consecutive DEP traps smaller than the length of the depletion zone will ensure that the DEP force dominates bacterial motion over motility and Brownian motion.
- 13 February 2023
- Published by IOP Publishing in Nanotechnology
- Vol. 34 (17) , 175502
Chip for dielectrophoretic microbial capture, separation and detection II: experimental study
In our previous paper we have modelled a dielectrophoretic force (DEP) and cell particle behavior in a microfluidic channel (Weber MU et al 2023 Chip for dielectrophoretic microbial capture, separation and detection I: theoretical basis of electrode design Nanotechnology this issue). Here we test and confirm the results of our modeling work by experimentally validating the theoretical design constraints of the ring electrode architecture. We have compared and tested the geometry and particle capture and separation performance of the two separate electrode designs (the ring and dot electrode structures) by investigating bacterial motion in response to the applied electric field. We have quantitatively evaluated the electroosmosis (EO) to positive DEP (PDEP) transition in both electrode designs and explained the differences in capture efficiency of the ring and dot electrode systems. The ring structure shows 99% efficiency of bacterial capture both for PDEP and for EO. Moreover, the ring structure shows an over 200 faster bacterial response to the electric field. We have also established that the ring electrode architecture, with appropriate structure periodicity and spacing, results in efficient capture and separation of microbial cells. We have identified several critical design constraints that are required to achieve high efficiency bacterial capture. We have established that the spacing between consecutive DEP traps smaller than the length of the depletion zone will ensure that the DEP force dominates bacterial motion over motility and Brownian motion.
- 20 January 2023
- Published by IOP Publishing in Nanotechnology
- Vol. 34 (13) , 135502
Chip for dielectrophoretic microbial capture, separation and detection I: theoretical basis of electrode design
We model the dielectrophoretic response of E. coli bacterial cells and red blood cells, upon exposure to an electric field. We model the separation, capture, and release mechanisms under flow conditions in a microfluidic channel and show under which conditions efficient separation of different cell types occurs. The modelling work is aimed to guide the separation electrode architecture and design for experimental validation of the model. The dielectrophoretic force is affected both by the geometry of the electrodes (the gradient of the electric field), the Re{CM(ω)} factor, and the permittivity of the medium ϵm. Our modelling makes testable predictions and shows that designing the electrode structure to ensure structure periodicity with spacing between consecutive traps smaller than the length of the depletion zone ensures efficient capture and separation. Such electrode system has higher capture and separation efficiency than systems with the established circular electrode architecture. The simulated, modelled microfluidic design allows for the separated bacteria, concentrated by dedicated dielectrophoretic regions, to be subsequently detected using label-free functionalized nanowire sensors. The experimental validation of the modelling work presented here and the validation of the theoretical design constraints of the chip electrode architecture is presented in the companion paper in the same issue (Weber MU et al 2022 Chip for dielectrophoretic Microbial Capture, Separation and Detection II: Experimental Study).
- 20 January 2023
- Published by IOP Publishing in Nanotechnology
- Vol. 34 (13) , 135502
Chip for dielectrophoretic microbial capture, separation and detection I: theoretical basis of electrode design
We model the dielectrophoretic response of E. coli bacterial cells and red blood cells, upon exposure to an electric field. We model the separation, capture, and release mechanisms under flow conditions in a microfluidic channel and show under which conditions efficient separation of different cell types occurs. The modelling work is aimed to guide the separation electrode architecture and design for experimental validation of the model. The dielectrophoretic force is affected both by the geometry of the electrodes (the gradient of the electric field), the Re{CM(ω)} factor, and the permittivity of the medium ϵm. Our modelling makes testable predictions and shows that designing the electrode structure to ensure structure periodicity with spacing between consecutive traps smaller than the length of the depletion zone ensures efficient capture and separation. Such electrode system has higher capture and separation efficiency than systems with the established circular electrode architecture. The simulated, modelled microfluidic design allows for the separated bacteria, concentrated by dedicated dielectrophoretic regions, to be subsequently detected using label-free functionalized nanowire sensors. The experimental validation of the modelling work presented here and the validation of the theoretical design constraints of the chip electrode architecture is presented in the companion paper in the same issue (Weber MU et al 2022 Chip for dielectrophoretic Microbial Capture, Separation and Detection II: Experimental Study).
- Open Access
Simultaneous multicolor fluorescence imaging using duplication-based PSF splitting
We present a way to encode more information in fluorescence imaging by splitting the emission into copies of the original point-spread function (PSF), which offers broadband operation and compatibility with other PSF engineering modalities and existing analysis tools. We demonstrate the approach using the ‘Circulator’, an add-on that encodes the fluorophore emission band into the PSF, enabling simultaneous multicolor super-resolution and single-molecule microscopy using essentially the full field of view.
Open AccessSimultaneous multicolor fluorescence imaging using duplication-based PSF splitting
We present a way to encode more information in fluorescence imaging by splitting the emission into copies of the original point-spread function (PSF), which offers broadband operation and compatibility with other PSF engineering modalities and existing analysis tools. We demonstrate the approach using the ‘Circulator’, an add-on that encodes the fluorophore emission band into the PSF, enabling simultaneous multicolor super-resolution and single-molecule microscopy using essentially the full field of view.
- Open Access
- 9 July 2021
- Published by IOP Publishing in Methods and Applications in Fluorescence
- Vol. 9 (4) , 045001
Quantitative comparison of luminescence probes for biomedical applications
Optical imaging holds great promise for the early-stage detection of diseases. It plays an important role in the process of protecting the patient’s health. Most of the organic dyes suffer due to photobleaching, light scattering, short light penetration depth, and autofluorescence of specimen, thus, need to be replaced with alternative nanoprobes emitting light in the optical biological window (700–1350 nm). The group of candidates which can challenged described problems are colloidal quantum dots (e.g. CdSe and PbS) and upconverting nanocrystals (e.g. NaGdF4:Er, Yb). This paper presents comprehensive and systematic studies of the aforementioned probes, using specially designed tissue phantom, and custom-built wide-field fluorescence microscope. We investigated how the absorption and scattering of light at the water, hemoglobin, and intralipid may affect the intensity of luminescence probes and the quality of optical images. We propose a protocol, that could be easily implemented for investigating other nanoprobes that allow for comparison of their optical performance.
- 9 July 2021
- Published by IOP Publishing in Methods and Applications in Fluorescence
- Vol. 9 (4) , 045001
Open AccessQuantitative comparison of luminescence probes for biomedical applications
Optical imaging holds great promise for the early-stage detection of diseases. It plays an important role in the process of protecting the patient’s health. Most of the organic dyes suffer due to photobleaching, light scattering, short light penetration depth, and autofluorescence of specimen, thus, need to be replaced with alternative nanoprobes emitting light in the optical biological window (700–1350 nm). The group of candidates which can challenged described problems are colloidal quantum dots (e.g. CdSe and PbS) and upconverting nanocrystals (e.g. NaGdF4:Er, Yb). This paper presents comprehensive and systematic studies of the aforementioned probes, using specially designed tissue phantom, and custom-built wide-field fluorescence microscope. We investigated how the absorption and scattering of light at the water, hemoglobin, and intralipid may affect the intensity of luminescence probes and the quality of optical images. We propose a protocol, that could be easily implemented for investigating other nanoprobes that allow for comparison of their optical performance.
- Open Access
- 6 October 2020
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 5 (41) , 26537-26544
Single-Nanocrystal Studies on the Homogeneity of the Optical Properties of NaYF4:Yb3+,Er3+
Development of upconverting nanomaterials which are able to emit visible light upon near-infrared excitation opens a wide range of potential applications. Because of their remarkable photostability, they are widely used in bioimaging, optogenetics, and optoelectronics. In this work, we demonstrate the influence of several experimental conditions as well as a dopant concentration on the luminescence properties of upconverting nanocrystals (UPNCs) that need to be taken into account for their efficient use in the practical applications. We found that not only nanoparticle architecture affects the optical properties of UPNCs, but also factors such as sample concentration, excitation light power density, and temperature may influence the green-to-red emission ratio. We performed studies on both the single-nanoparticle and ensemble levels over a broad concentration range and found the heterogeneity in the optical properties of UPNCs with low dopant concentrations.
- 6 October 2020
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 5 (41) , 26537-26544
Open AccessSingle-Nanocrystal Studies on the Homogeneity of the Optical Properties of NaYF4:Yb3+,Er3+
Development of upconverting nanomaterials which are able to emit visible light upon near-infrared excitation opens a wide range of potential applications. Because of their remarkable photostability, they are widely used in bioimaging, optogenetics, and optoelectronics. In this work, we demonstrate the influence of several experimental conditions as well as a dopant concentration on the luminescence properties of upconverting nanocrystals (UPNCs) that need to be taken into account for their efficient use in the practical applications. We found that not only nanoparticle architecture affects the optical properties of UPNCs, but also factors such as sample concentration, excitation light power density, and temperature may influence the green-to-red emission ratio. We performed studies on both the single-nanoparticle and ensemble levels over a broad concentration range and found the heterogeneity in the optical properties of UPNCs with low dopant concentrations.
- 1 May 2020
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2020-01 (16) , 1069
Single Nanocrystals Studies of Upconverting Nanoparticles
Upconverting nanocrystals (UCNC) such as NaYF4:Er3+, Yb3+ have been recently a subject of intensive investigation due to their unique optical properties and high potential in applications in biology and medicine as multifunctional diagnostic probes. Despite the level of attention paid to this material, their very low emission quantum yield is still an important problem excluding them from clinical applications. Thus, understanding of UCNC emission intensity limitation together with a development in growth protocols are crucial challenges to bring these materials to clinical practice. One of the main obstacles, which slowdown the progress in this field, is the complicity of the emission quantum yield measurements. Moreover, even the relative emission intensity measurements (from sample to sample), became a very challenging experiment in case of UCNC. These two difficulties make the optimization of growth process and understanding of experimental data very challenging tasks. In this paper, we will discuss the influence of relative ions concentration, size and the shape of UCNC on their optical properties. We will also show our results obtained for a single UCNC, measured however in the wide field mode giving also the possibility of statistical analysis of UCNC properties. These results will include both the optical imaging as well spectroscopic data. With these results we will show, that this type of experiment enables to measure the relative UCNC emission intensity from sample to sample, what allows for optimization of nanocrystals growth as well as enables to understand the physical limitation of UCNC emission intensity. In particular, we will investigate the effects of Yb3+ ions clustering and its impact on NaYF4:Yb3+, Er3+ UCNC emission intensity. We will also support our conclusions with numerical data. Based on our results we will explain the influence of Yb3+ concentration on optical properties of UCNC in details. Moreover, based on obtained experimental and numerical results we will explain the existence of optimal Yb3+ concentration in UCNC often reported in the literature.
- 1 May 2020
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2020-01 (16) , 1069
Single Nanocrystals Studies of Upconverting Nanoparticles
Upconverting nanocrystals (UCNC) such as NaYF4:Er3+, Yb3+ have been recently a subject of intensive investigation due to their unique optical properties and high potential in applications in biology and medicine as multifunctional diagnostic probes. Despite the level of attention paid to this material, their very low emission quantum yield is still an important problem excluding them from clinical applications. Thus, understanding of UCNC emission intensity limitation together with a development in growth protocols are crucial challenges to bring these materials to clinical practice. One of the main obstacles, which slowdown the progress in this field, is the complicity of the emission quantum yield measurements. Moreover, even the relative emission intensity measurements (from sample to sample), became a very challenging experiment in case of UCNC. These two difficulties make the optimization of growth process and understanding of experimental data very challenging tasks. In this paper, we will discuss the influence of relative ions concentration, size and the shape of UCNC on their optical properties. We will also show our results obtained for a single UCNC, measured however in the wide field mode giving also the possibility of statistical analysis of UCNC properties. These results will include both the optical imaging as well spectroscopic data. With these results we will show, that this type of experiment enables to measure the relative UCNC emission intensity from sample to sample, what allows for optimization of nanocrystals growth as well as enables to understand the physical limitation of UCNC emission intensity. In particular, we will investigate the effects of Yb3+ ions clustering and its impact on NaYF4:Yb3+, Er3+ UCNC emission intensity. We will also support our conclusions with numerical data. Based on our results we will explain the influence of Yb3+ concentration on optical properties of UCNC in details. Moreover, based on obtained experimental and numerical results we will explain the existence of optimal Yb3+ concentration in UCNC often reported in the literature.
- 24 April 2020
- Published by The Electrochemical Society in ECS Transactions
- Vol. 97 (2) , 29-39
Single Nanocrystals Studies of Upconverting Nanoparticles
Single-molecule imaging and spectroscopy are well-established experimental techniques that operate at the limits of the analytical chemistry and spatial resolution of conventional optical microscopy. It allows for observation of individual, often unique properties of molecules and nanoparticles, not accessible with other techniques. Due to the sparse distribution of nanoparticles, mutual interactions are limited, which improves the reliability of the experimental techniques operating at the level of single nanoparticles. This approach also makes it possible to conduct research without disrupting the results with effects related to the distribution of the physicochemical properties of investigated objects. It enables also to separate phenomena related to mutual interactions between the investigated objects. For these and other reasons, this technique is increasingly used for nanocrystals investigations. However, very little has been still done using these techniques in the area of upconverting nanoparticles. In this work, we demonstrate the results of single nanocrystals studies of upconverting nanocrystals (UCNCs) doped with Yb3+ and Er3+ ions. In particular, we present the impact of the heterogeneity of the nanocrystals on the optical properties of UCNCs. That, in turn, limits the use of the UCNCs in the practical application f. e. in nanothermometry.
- 24 April 2020
- Published by The Electrochemical Society in ECS Transactions
- Vol. 97 (2) , 29-39
Single Nanocrystals Studies of Upconverting Nanoparticles
Single-molecule imaging and spectroscopy are well-established experimental techniques that operate at the limits of the analytical chemistry and spatial resolution of conventional optical microscopy. It allows for observation of individual, often unique properties of molecules and nanoparticles, not accessible with other techniques. Due to the sparse distribution of nanoparticles, mutual interactions are limited, which improves the reliability of the experimental techniques operating at the level of single nanoparticles. This approach also makes it possible to conduct research without disrupting the results with effects related to the distribution of the physicochemical properties of investigated objects. It enables also to separate phenomena related to mutual interactions between the investigated objects. For these and other reasons, this technique is increasingly used for nanocrystals investigations. However, very little has been still done using these techniques in the area of upconverting nanoparticles. In this work, we demonstrate the results of single nanocrystals studies of upconverting nanocrystals (UCNCs) doped with Yb3+ and Er3+ ions. In particular, we present the impact of the heterogeneity of the nanocrystals on the optical properties of UCNCs. That, in turn, limits the use of the UCNCs in the practical application f. e. in nanothermometry.