Amir Hassan Montazer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Amir Hassan Montazer has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
A. Ramazani
Department of Physics, University of Kashan 1 , Kashan 87317-51167, Iran
11 shared publicationsM. Almasi Kashi
Department of Physics, University of Kashan 1 , Kashan 87317-51167, Iran
10 shared publications- Mohammad Almasi Kashi
University of Kashan
9 shared publications - Abdolali Ramazani
University of Kashan, Kashan
5 shared publications - Mohammed H. Abbas
Department of Physics, University of Babylon, College of Education for Pure Sciences, Babylon, Iraq., Iraq
3 shared publications A Ramazani
Institute of Nanoscience and Nanotechnology, University of Kashan, Kashan 87317-51167, Iran
2 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by Wiley in Bioinorganic Chemistry and Applications
- Vol. 2026 (1)
Ag‐Decorated Hydrogen Molybdenum Bronze Nanotubes as Dual‐Action Agents Against Bacillus subtilis : Experimental and Theoretical Insights Into Membrane Damage and Protein Interference
Bacterial biofilms are a persistent challenge in industrial settings such as water treatment and food processing, contributing to antimicrobial resistance, operational inefficiencies, and environmental burden. Here, we report on the synthesis and multiscale evaluation of hydrogen molybdenum bronze nanosheets (HMB‐NSHs) and their silver‐decorated nanotube derivatives (Ag–decorated HMB‐NTs), produced via an arc discharge method. High‐resolution structural analyses revealed crystalline, ultrathin HMB sheets and tubular architectures adorned with uniformly distributed Ag nanoparticles (∼3–5 nm). While HMB‐NSHs were biologically inert, Ag–decorated HMB‐NTs demonstrated potent antibacterial effects against Bacillus subtilis , inhibiting planktonic growth (75.7%), biofilm formation (77.7%), and biofilm eradication (64.3%) at 25 μg/mL. Complementary SEM and fluorescence microscopy visualizations revealed pronounced morphological membrane damage such as wrinkling, roughening, and biofilm reduction signatures absent in control and HMB‐treated samples, facilitating metal ion deposition and localized oxidative stress. At the molecular level, multiscale computational modeling, including molecular docking, DFT, QTAIM, RDG, and IGM analyses, provided atomic‐resolution insights into dual‐site antibacterial action. The Ag and HMB moieties interact favorably with both the cell‐wall penicillin‐binding protein (PDB ID: 4WO7) and intracellular division regulator FtsZ (PDB ID: 2VAM), forming energetically stable complexes. QTAIM metrics confirmed extensive van der Waals and hydrogen bonding networks with 4WO7, whereas RDG and IGM surfaces visualized dense noncovalent contact regions. Ag–FtsZ interactions, though weaker, suggest possible disruption of cell cycle machinery upon internalization. These findings establish Ag‐decorated HMB‐NTs as a dual‐function nanomaterial: HMB scaffolds promote surface adhesion and stability, whereas Ag enables membrane destabilization and intracellular disruption. Together, these processes highlight membrane damage and protein interference as the primary antibacterial mechanisms, underscoring their potential as a next‐generation antibacterial platform, particularly against biofilm‐forming and industrially relevant bacteria such as Bacillus subtilis .
- 1 January 2026
- Published by Wiley in Bioinorganic Chemistry and Applications
- Vol. 2026 (1)
Open AccessAg‐Decorated Hydrogen Molybdenum Bronze Nanotubes as Dual‐Action Agents Against Bacillus subtilis : Experimental and Theoretical Insights Into Membrane Damage and Protein Interference
Bacterial biofilms are a persistent challenge in industrial settings such as water treatment and food processing, contributing to antimicrobial resistance, operational inefficiencies, and environmental burden. Here, we report on the synthesis and multiscale evaluation of hydrogen molybdenum bronze nanosheets (HMB‐NSHs) and their silver‐decorated nanotube derivatives (Ag–decorated HMB‐NTs), produced via an arc discharge method. High‐resolution structural analyses revealed crystalline, ultrathin HMB sheets and tubular architectures adorned with uniformly distributed Ag nanoparticles (∼3–5 nm). While HMB‐NSHs were biologically inert, Ag–decorated HMB‐NTs demonstrated potent antibacterial effects against Bacillus subtilis , inhibiting planktonic growth (75.7%), biofilm formation (77.7%), and biofilm eradication (64.3%) at 25 μg/mL. Complementary SEM and fluorescence microscopy visualizations revealed pronounced morphological membrane damage such as wrinkling, roughening, and biofilm reduction signatures absent in control and HMB‐treated samples, facilitating metal ion deposition and localized oxidative stress. At the molecular level, multiscale computational modeling, including molecular docking, DFT, QTAIM, RDG, and IGM analyses, provided atomic‐resolution insights into dual‐site antibacterial action. The Ag and HMB moieties interact favorably with both the cell‐wall penicillin‐binding protein (PDB ID: 4WO7) and intracellular division regulator FtsZ (PDB ID: 2VAM), forming energetically stable complexes. QTAIM metrics confirmed extensive van der Waals and hydrogen bonding networks with 4WO7, whereas RDG and IGM surfaces visualized dense noncovalent contact regions. Ag–FtsZ interactions, though weaker, suggest possible disruption of cell cycle machinery upon internalization. These findings establish Ag‐decorated HMB‐NTs as a dual‐function nanomaterial: HMB scaffolds promote surface adhesion and stability, whereas Ag enables membrane destabilization and intracellular disruption. Together, these processes highlight membrane damage and protein interference as the primary antibacterial mechanisms, underscoring their potential as a next‐generation antibacterial platform, particularly against biofilm‐forming and industrially relevant bacteria such as Bacillus subtilis .
- 20 August 2025
- Published by Springer Nature in Applied Physics A
- Vol. 131 (9) , 1-13
Magnetic characteristics and hyperthermia properties of copper-cobalt ferrite (CuxCo1−xFe2O4) nanoparticles
- 20 August 2025
- Published by Springer Nature in Applied Physics A
- Vol. 131 (9) , 1-13
Magnetic characteristics and hyperthermia properties of copper-cobalt ferrite (CuxCo1−xFe2O4) nanoparticles
- 27 May 2025
- Published by IOP Publishing in Nanotechnology
- Vol. 36 (23) , 235702
Soft-hard magnetic phase tuning of FeCo nanowire arrays by electrodeposition current density
A better understanding of magnetic phases and interactions in nanomaterials can provide new pathways for the development of tunable magnetic storage media, facilitating their design and integration in nanodevices. Here, we use a pulse electrochemical method, and change the electrodeposition current density (J ed) in the range of 12.50–37.50 mA cm−2 in order to fabricate FeCo nanowire arrays (NWAs) in mild-anodized aluminum oxide membranes. While the length and composition of the NWs are not considerably affected with increasing J ed, we observe obvious changes in the shape of magnetic hysteresis curves, arising from the coupling of soft-hard phases. By investigating the crystalline properties of the NWAs, the hard phase is attributed to almost Fe50Co50 alloy structure, whereas the soft phase is due to the presence of magnetic oxides, including CoO and FeO. We obtain first-order reversal diagrams to study the two phases in more detail, indicating the involvement of interference and complex features. The increasing trends observed in hysteresis curve coercivity and squareness from 416 to 1752 Oe and 0.12–0.80 with increasing J ed from 12.50 to 37.50 mA cm−2, respectively, are accompanied with significant reductions in soft phase intensity and interphase magnetic interactions. Our results indicate the possibility of tuning soft-hard magnetic phases in FeCo NWAs through controlling J ed during the electrodeposition process in the membranes.
- 27 May 2025
- Published by IOP Publishing in Nanotechnology
- Vol. 36 (23) , 235702
Soft-hard magnetic phase tuning of FeCo nanowire arrays by electrodeposition current density
A better understanding of magnetic phases and interactions in nanomaterials can provide new pathways for the development of tunable magnetic storage media, facilitating their design and integration in nanodevices. Here, we use a pulse electrochemical method, and change the electrodeposition current density (J ed) in the range of 12.50–37.50 mA cm−2 in order to fabricate FeCo nanowire arrays (NWAs) in mild-anodized aluminum oxide membranes. While the length and composition of the NWs are not considerably affected with increasing J ed, we observe obvious changes in the shape of magnetic hysteresis curves, arising from the coupling of soft-hard phases. By investigating the crystalline properties of the NWAs, the hard phase is attributed to almost Fe50Co50 alloy structure, whereas the soft phase is due to the presence of magnetic oxides, including CoO and FeO. We obtain first-order reversal diagrams to study the two phases in more detail, indicating the involvement of interference and complex features. The increasing trends observed in hysteresis curve coercivity and squareness from 416 to 1752 Oe and 0.12–0.80 with increasing J ed from 12.50 to 37.50 mA cm−2, respectively, are accompanied with significant reductions in soft phase intensity and interphase magnetic interactions. Our results indicate the possibility of tuning soft-hard magnetic phases in FeCo NWAs through controlling J ed during the electrodeposition process in the membranes.
- 30 December 2024
- Published by IOP Publishing in Nanotechnology
- Vol. 36 (9) , 095708
Tuning specific absorption rate of Mn ferrite nanoparticles synthesized by a thermal decomposition method with different Mn concentrations
A thermal decomposition method is used to synthesize monodisperse Mn ferrite nanoparticles (NPs) by changing Mn concentration from 0.1 to 0.8 mmol. The effects of Mn concentration on structural, compositional, morphological, magnetic, and hyperthermia properties are investigated. Transmission electron microscopic images show that the morphology of the NPs changes from flower-like to polygonal with increasing the Mn concentration. The saturation magnetization reaches a maximum value of 48.32 emu g−1 and a minimum value of 11.09 emu g−1 with changing the Mn concentration, whereas the coercivity value decreases from 12.6 to 5.3 Oe. The first-order reversal curve analysis enables the estimation of superparamagnetic contribution of the Mn ferrite NPs in the range of 21%–59.5%. The highest specific absorption rate value is obtained to be 385.37 W g−1 for Mn0.1Fe2.9O4 NPs with the maximum superparamagnetic contribution using a manganese concentration of 0.4 mmol.
- 30 December 2024
- Published by IOP Publishing in Nanotechnology
- Vol. 36 (9) , 095708
Tuning specific absorption rate of Mn ferrite nanoparticles synthesized by a thermal decomposition method with different Mn concentrations
A thermal decomposition method is used to synthesize monodisperse Mn ferrite nanoparticles (NPs) by changing Mn concentration from 0.1 to 0.8 mmol. The effects of Mn concentration on structural, compositional, morphological, magnetic, and hyperthermia properties are investigated. Transmission electron microscopic images show that the morphology of the NPs changes from flower-like to polygonal with increasing the Mn concentration. The saturation magnetization reaches a maximum value of 48.32 emu g−1 and a minimum value of 11.09 emu g−1 with changing the Mn concentration, whereas the coercivity value decreases from 12.6 to 5.3 Oe. The first-order reversal curve analysis enables the estimation of superparamagnetic contribution of the Mn ferrite NPs in the range of 21%–59.5%. The highest specific absorption rate value is obtained to be 385.37 W g−1 for Mn0.1Fe2.9O4 NPs with the maximum superparamagnetic contribution using a manganese concentration of 0.4 mmol.
- 29 November 2022
- Published by IOP Publishing in Nanotechnology
- Vol. 34 (7) , 075701
Current density-induced emergence of soft and hard magnetic phases in Fe nanowire arrays
The capability of generating magnetically soft and hard phases in a material is important in many aspects, ranging from basic science to applications. Here, the emergence of soft and hard magnetic phases is reported in Fe nanowire (NW) arrays with a diameter of 35 nm fabricated by using a pulsed electrochemical deposition method in porous aluminum oxide templates under different current density (C d ) values in the range of 25–100 mA cm−2. The variation of C d influences the grain size, crystallinity, electrodeposition efficiency and length of the Fe NWs, as characterized by x-ray diffraction, high-resolution transmission electron microscopy, vibrating sample magnetometry and field-emission scanning electron microscopy. Increasing C d from 25 to 80 mA cm−2 results in a significant decrease in coercivity and squareness from 1590 to 900 Oe and 0.9 to 0.5, respectively, inducing the soft and hard phases along the length of Fe NWs. Further increasing the C d leads to the separation of the phases, as evidenced by first-order reversal curve analysis. From a theoretical aspect, the emergence of the soft phase may lead to the occurrence of the fanning reversal mode in the NWs, for which there is no precedent in previous experimental investigations.
- 29 November 2022
- Published by IOP Publishing in Nanotechnology
- Vol. 34 (7) , 075701
Current density-induced emergence of soft and hard magnetic phases in Fe nanowire arrays
The capability of generating magnetically soft and hard phases in a material is important in many aspects, ranging from basic science to applications. Here, the emergence of soft and hard magnetic phases is reported in Fe nanowire (NW) arrays with a diameter of 35 nm fabricated by using a pulsed electrochemical deposition method in porous aluminum oxide templates under different current density (C d ) values in the range of 25–100 mA cm−2. The variation of C d influences the grain size, crystallinity, electrodeposition efficiency and length of the Fe NWs, as characterized by x-ray diffraction, high-resolution transmission electron microscopy, vibrating sample magnetometry and field-emission scanning electron microscopy. Increasing C d from 25 to 80 mA cm−2 results in a significant decrease in coercivity and squareness from 1590 to 900 Oe and 0.9 to 0.5, respectively, inducing the soft and hard phases along the length of Fe NWs. Further increasing the C d leads to the separation of the phases, as evidenced by first-order reversal curve analysis. From a theoretical aspect, the emergence of the soft phase may lead to the occurrence of the fanning reversal mode in the NWs, for which there is no precedent in previous experimental investigations.
- 15 June 2022
- Published by IOP Publishing in Nanotechnology
- Vol. 33 (36) , 365701
Magnetization reversal properties and magnetostatic interactions of disk to rod-shaped FeNi layers separated by ultra-thin Cu layers
From fast magnetic memories with low-power consumption to recording media with high densities, realizing the magnetization reversal and interaction of magnetic layers would allow for manipulating the ultimate properties. Here, we use a pulsed electrochemical deposition technique in porous alumina templates (50 nm in pore diameter) to fabricate arrays of nanowires, consisting of FeNi layers (26−227 nm in thickness) with disk to rod-shaped morphologies separated by ultra-thin (3 nm) Cu layers. By acquiring hysteresis curves and first-order reversal curves (FORCs) of the multilayer nanowire arrays, we comprehensively investigate magnetization reversal properties and magnetostatic interactions of the layers at different field angles (0° ≤ θ ≤ 90°). These involve the extraction of several parameters, including hysteresis curve coercivity ( H c Hyst ), FORC coercivity ( H c FORC ), interaction field distribution width (Δ H u ), and irreversible fraction of magnetization ( IF m ) as a function of θ . We find relatively constant and continuously decreasing trends of H c Hyst when 0° ≤ θ ≤ 45°, and 45° < θ ≤ 90°, respectively. Meanwhile, angular dependence of H c FORC and IF m shows continuously increasing and decreasing trends, irrespective of the FeNi layer morphology. Our FORC results indicate the magnetization reversal properties of the FeNi/Cu nanowires are accompanied with vortex domain wall and single vortex modes, especially at high field angles. The rod-shaped layers also induce maximum Δ H u during the reversal process, owing to enhancements in both magnetizing and demagnetizing-type magnetostatic interactions.
- 15 June 2022
- Published by IOP Publishing in Nanotechnology
- Vol. 33 (36) , 365701
Magnetization reversal properties and magnetostatic interactions of disk to rod-shaped FeNi layers separated by ultra-thin Cu layers
From fast magnetic memories with low-power consumption to recording media with high densities, realizing the magnetization reversal and interaction of magnetic layers would allow for manipulating the ultimate properties. Here, we use a pulsed electrochemical deposition technique in porous alumina templates (50 nm in pore diameter) to fabricate arrays of nanowires, consisting of FeNi layers (26−227 nm in thickness) with disk to rod-shaped morphologies separated by ultra-thin (3 nm) Cu layers. By acquiring hysteresis curves and first-order reversal curves (FORCs) of the multilayer nanowire arrays, we comprehensively investigate magnetization reversal properties and magnetostatic interactions of the layers at different field angles (0° ≤ θ ≤ 90°). These involve the extraction of several parameters, including hysteresis curve coercivity ( H c Hyst ), FORC coercivity ( H c FORC ), interaction field distribution width (Δ H u ), and irreversible fraction of magnetization ( IF m ) as a function of θ . We find relatively constant and continuously decreasing trends of H c Hyst when 0° ≤ θ ≤ 45°, and 45° < θ ≤ 90°, respectively. Meanwhile, angular dependence of H c FORC and IF m shows continuously increasing and decreasing trends, irrespective of the FeNi layer morphology. Our FORC results indicate the magnetization reversal properties of the FeNi/Cu nanowires are accompanied with vortex domain wall and single vortex modes, especially at high field angles. The rod-shaped layers also induce maximum Δ H u during the reversal process, owing to enhancements in both magnetizing and demagnetizing-type magnetostatic interactions.
- 1 March 2022
- Published by Elsevier in Ceramics International
- Vol. 48 (12) , 16967-16976
Tuning specific loss power of CoFe2O4 nanoparticles by changing surfactant concentration in a combined co-precipitation and thermal decomposition method
- 1 March 2022
- Published by Elsevier in Ceramics International
- Vol. 48 (12) , 16967-16976
Tuning specific loss power of CoFe2O4 nanoparticles by changing surfactant concentration in a combined co-precipitation and thermal decomposition method
- 15 February 2022
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 55 (23) , 233002
Template-based electrodeposited nonmagnetic and magnetic metal nanowire arrays as building blocks of future nanoscale applications
Realizing promising materials for use in next-generation devices at the nanoscale is of enormous importance from both fundamental and applied perspectives. Nonmagnetic and magnetic metal nanowire (NW) arrays fabricated by template-based electrodeposition techniques have long been considered as good candidates for this purpose. In this review, we focus on the fabrication techniques and characterizations of electrochemically deposited NWs with single, binary, ternary and multilayered component structures mostly carried out in our group. Particular attention is paid to the crystalline and magnetic characteristics (coercivity, squareness, magnetic phase, interactions and magnetization reversal modes) of NW arrays embedded in mild and hard anodized anodic aluminum oxide (AAO) templates with different pore diameters. The pulsed alternating current electrodeposition technique is proposed as a versatile approach in high-efficiency filling of the AAO templates, while also allowing for tuning magnetic properties of the resultant NWs. The first-order reversal curve analysis is also highlighted as an advanced characterization tool for nanomagnet arrays. Finally, potential cutting-edge nanoscale applications (magnetic information storage, energy storage and conversion, electronics, biosensing, microwave absorption and giant magnetoresistance) of magnetic NWs are presented.
- 15 February 2022
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 55 (23) , 233002
Template-based electrodeposited nonmagnetic and magnetic metal nanowire arrays as building blocks of future nanoscale applications
Realizing promising materials for use in next-generation devices at the nanoscale is of enormous importance from both fundamental and applied perspectives. Nonmagnetic and magnetic metal nanowire (NW) arrays fabricated by template-based electrodeposition techniques have long been considered as good candidates for this purpose. In this review, we focus on the fabrication techniques and characterizations of electrochemically deposited NWs with single, binary, ternary and multilayered component structures mostly carried out in our group. Particular attention is paid to the crystalline and magnetic characteristics (coercivity, squareness, magnetic phase, interactions and magnetization reversal modes) of NW arrays embedded in mild and hard anodized anodic aluminum oxide (AAO) templates with different pore diameters. The pulsed alternating current electrodeposition technique is proposed as a versatile approach in high-efficiency filling of the AAO templates, while also allowing for tuning magnetic properties of the resultant NWs. The first-order reversal curve analysis is also highlighted as an advanced characterization tool for nanomagnet arrays. Finally, potential cutting-edge nanoscale applications (magnetic information storage, energy storage and conversion, electronics, biosensing, microwave absorption and giant magnetoresistance) of magnetic NWs are presented.
- 9 January 2020
- Published by IOP Publishing in Journal of Physics: Condensed Matter
- Vol. 32 (15) , 155801
3D interacting magnetic multilayered nanowire arrays: the emergence and evolution of new first-order reversal curve features
The crucial role of magnetostatic interactions in tuning properties of storage devices based on magnetic nanowires (NWs) has recently been highlighted by advanced characterization techniques including the first-order reversal curve (FORC) analysis, evaluating physical entities constituting conventional 2D NW systems. Herein, FORC diagrams of ferromagnetic (FM)/non-magnetic (NM) multilayered NW arrays are simulated using Monte Carlo calculations, involving magnetostatic interactions between segments in 3D space. The FM length is constant to 6 µ m whereas the NM length ( L NM ) varies from 10 to 300 nm, significantly influencing interwire and intrasegment interactions of neighboring NWs and coupled segments along the NW length. Intriguingly, this is accompanied with the emergence of two new FORC diagram features in addition to the typical demagnetizing-type feature, indicating complex behavior of the 3D interacting NWs with the same anisotropy field for each FM segment. The FORC coercivity of the emerging features is tracked individually, presenting evolution as a function of L NM . Our results also evidence an increase in interwire and intrasegment interactions when increasing NW diameter, being in accordance with total magnetostatic energy calculations.
- 9 January 2020
- Published by IOP Publishing in Journal of Physics: Condensed Matter
- Vol. 32 (15) , 155801
3D interacting magnetic multilayered nanowire arrays: the emergence and evolution of new first-order reversal curve features
The crucial role of magnetostatic interactions in tuning properties of storage devices based on magnetic nanowires (NWs) has recently been highlighted by advanced characterization techniques including the first-order reversal curve (FORC) analysis, evaluating physical entities constituting conventional 2D NW systems. Herein, FORC diagrams of ferromagnetic (FM)/non-magnetic (NM) multilayered NW arrays are simulated using Monte Carlo calculations, involving magnetostatic interactions between segments in 3D space. The FM length is constant to 6 µ m whereas the NM length ( L NM ) varies from 10 to 300 nm, significantly influencing interwire and intrasegment interactions of neighboring NWs and coupled segments along the NW length. Intriguingly, this is accompanied with the emergence of two new FORC diagram features in addition to the typical demagnetizing-type feature, indicating complex behavior of the 3D interacting NWs with the same anisotropy field for each FM segment. The FORC coercivity of the emerging features is tracked individually, presenting evolution as a function of L NM . Our results also evidence an increase in interwire and intrasegment interactions when increasing NW diameter, being in accordance with total magnetostatic energy calculations.