NFNora K. Foley

Nora K. Foley

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Nora K. Foley has a total of 120 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Pb Isotopic Compositions of Air Filters and Soils Adjacent to a Recycling Battery Smelter, East Los Angeles, California, U.S.A. 

    by Robert Ayuso, Nora Foley, Rani Indela

    Pb (lead) isotopic compositions of particulates from air filters monitoring air quality near a recently closed battery recycling smelter combined with soil profiles collected from nearby residential and urban sites were determined to examine possible sources of Pb contamination in the soils. Abnormally high metal contents found in the residential soils are known to have negatively affected human health in these local environmentally burdened communities. Adjacent to the smelter Pb contents of soils are up to 4000 ppm and in residential sites surrounding the smelter the soils have Pb up to 2190 ppm. Because the Pb contents in many residential soils are significantly higher than allowed by government agencies, they require remediation procedures. Determining an exact linkage between emanations from smelter operations and residential soils can be contentious due to multiple potential Pb sources (e.g., smelters, fossil fuels, paint). We now report for the first-time preliminary air filter Pb isotopic compositions from the Exide smelter measured by TIMS (Thermal Ionization Mass Spectrometry) and HR-ICPMS (High Resolution Inductively Coupled Mass Spectrometry). Descriptions of the morphology, mineralogy, and chemistry of the Pb particulate matter in the air filters has also been reported (Foley et al., this abstract volume). The air filter Pb isotopic compositions (206Pb/207Pb~1.1640-1.2078, 208Pb/207Pb~2.4585-2.4718) yield a spread from radiogenic values typical of rock-derived Pb (natural) to lower Pb isotopic values that likely indicate sourcing from anthropogenic Pb, and other metals generated by smelting processes. The overall isotopic range shown by the air filter data closely parallels that of the soils. The soils include a group adjacent to the Exide smelter that has the lowest Pb isotopic values and that overlaps with the isotopic compositions of nearby residential sites (206Pb/207Pb ~1.1671–1.1755, 208Pb/207Pb ~ 2.4319–2.4375). Air filters with the lowest isotopic values overlap this group. Another group of soils collected farther away from the smelter has more radiogenic values (206Pb/207Pb >~1.190, 208Pb/207Pb >~2.443) that more closely resemble rock (natural) Pb. Residential soils containing Pb that is isotopically indistinguishable from soils near the Exide smelter are interpreted as contaminated by human activities. Because air filters 1) represent emanations coming from the smelter, and 2) comprise Pb that isotopically overlaps with that of residential soils adjacent to the smelter, we conclude that a strong link exists between the smelter emanations and residential soils. Despite this conclusion, much remains unknown, including the temporal evolution of Pb isotopic compositions during nearly 100 years of smelter operation, the duration that the smelter has been a regional metal contaminating source, and whether the site contains unknown external contributions of Pb with distinct isotopic compositions. It is advantageous to establish baseline concentrations of metals such as Pb, As, Cd, Zn, Sb, and Cu, and Pb isotopic compositions of soils, waters, and air-borne particulate matter before industrial facilities such as smelters are put in operation and during property transitions. Such baseline and background information can help identify potential contaminant pathways and assist both industry and governmental agencies in monitoring smelter operations.

  • Open Access

    Morphology and Chemistry of Lead Particulate Matter in Air-Filters from a Lead-acid Battery Smelter: Mapping the Transfer to Residential Soils, East Los Angeles, California, U.S.A. 

    by Nora Foley, Robert Ayuso, Rani Indela

    Primary smelting associated with processing of ore can generate substantial quantities of dust containing metallic particles. Secondary smelting of lead batteries at recycling facilities employs many of the same processing steps as primary smelters, and also generates significant metallic dust. The objectives of this study were to document the morphology, mineralogy, and chemistry of smelter emissions as represented by dust particles emitted from a former lead battery recycling facility in East Los Angeles, CA, during operation, closure, and dismantling of the site. Together with Pb isotopic compositions of the particulate matter (Ayuso et al., this abstract volume), we seek to evaluate contributions of smelter-derived particulate matter to soils in residential neighborhoods surrounding the facility.Air filter (HEPA) media were collected from monitors installed around the periphery of the recycling facility. Filter paper samples (~1x2cm) were mounted on stubs and studied by back-scatter-electron-field emission-scanning electron microscopy (20 kV, WD=10mm) and qualitative energy dispersive spectroscopy at µm to nm scales. Particulate matter trapped in-situ in the air filter media show a wide range in size, shape, and composition. The particles include (A) distinctive, metallic (Cu, Fe, Pb, Si) micro-to-nanospheres (50 µm-wide), and (D) pollen grains (~10-50 µm).Four main categories of metallic spheres were identified based on dominant composition and size range: Si (

  • Open Access

    Volcanic-hosted Be-(Li-F-REEs-U) mineralization at the world-class Spor Mountain deposit, Utah, USA: Insights into source rocks, geochemical signatures, and macro-to-microscale concentration processes

    by Nora K. Foley, Robert A. Ayuso, John C. Jackson, Rani Indela, Damon P. Bickerstaff

    Beryllium (Be) is among the most important rare metals in the world and is used to produce complex alloys and ceramics critical for the telecommunication, aerospace, medical, and defense industries. Global Be supplies are primarily obtained from bertrandite [Be4Si2O7(OH)2] mined from the Spor Mountain deposit, Utah, U.S.A, in a region dominated by Miocene-Oligocene alkaline rhyolitic tuffs and lavas. Ore occurs primarily in lithic-rich, phreatomagmatic, base-surge deposits containing carbonate debris in a basal tuff. The tuff is part of a package of rare-metal-rich rhyolite lava flows, pyroclastic deposits, and discordant fluorite-bearing pipes. Pb-Nd-Sr isotope and trace element data, together with mineral associations (1) map the flux of Be, Li, F, REEs, and U in the magmatic-to-hydrothermal system, (2) reveal the role of fluid-rock interactions and recrystallization processes in concentrating metals, and (3) place constraints on timescales of bertrandite-fluorite-opal precipitation. Geochemical models indicate that high-grade ore formed under pH-buffered conditions when F-rich fluids leached metals from glassy tuff, reacted with carbonate xenoliths, and deposited Be and other rare metals in complexly layered nodules composed of Mn-oxide, Li-smectite, calcite, fluorite, opal, and bertrandite. U-Pb age dates and coupled 29-element analyses of discrete opal layers by the SHRIMP-RG method show an almost continuous record of opal deposition. The results establish timescales of high-grade opaline ore formation with major influxes of Be, F, REEs, and Li from ~16 Ma to 10 Ma and of Mn and U at

  • Open Access

    Pb Isotopic Compositions of Soils and the Impact of Heavy Metal Smelters in Urbanized Industrial Settings, East Los Angeles, California, U.S.A. 

    by Robert Ayuso, Nora Foley, Jill Johnston, Rani Indela, John Jackson, Damon Bickerstaff

    Lead isotopes of soil profiles were measured to survey possible sources of lead. Thirty-seven soil profiles (n > 150 samples) were obtained near two lead battery recycling smelters: Exide (recently shutdown) and Quemetco/Ecobat (currently in operation) affecting thousands of residential sites. Preliminary soil Pb isotopic compositions plot as a band in Pb isotope space from radiogenic values typical of rock-derived lead to lower values that likely indicate anthropogenic lead. Three overlapping soil groups were established based on Pb isotope analysis by TIMS (Thermal Ionization Mass Spectrometry). Group 1 consists mainly of soils near the Exide smelter and nearby residential sites. Group 1 has low isotopic values with moderate variations in 206Pb/207Pb ~1.167–1.176, 208Pb/207Pb ~ 2.432–2.438, 206Pb/204Pb ~18.24–18.344. Group 2 has more radiogenic values than Group 1: 206Pb/207Pb ~1.178–1.190, 208Pb/207Pb ~2.439–2.443, 206Pb/204Pb ~18.34–18.56 and consists mostly of residential soils surrounding the Exide smelter. Group 3 is more radiogenic than Groups 1 and 2: 206Pb/207Pb >~1.190, 208Pb/207Pb >~2.443, 206Pb/204Pb >~18.56. Soils near the Quemetco facility have similar variations and overlap the three groups. About 80% of the Pb isotopes in leached soils near Exide have Pb compositions that match those of the smelters. Group 2 has up to about 67% Pb resembling the Exide smelter output and Group 3 yields up to about 18% matching Pb. Sites near Quemetco contained up to about 86% Pb isotopically similar to the Exide signature. Sites containing lead that isotopically matches soils near the Exide smelter are interpreted as contaminated by human activities. Smelter isotopic signatures are found as deep as 30 cm in the soil profiles. Our results demonstrate the need for establishing baselines and background concentrations of lead (and other metals such as As, Cd, Zn, Sb, and Cu) and Pb isotopic compositions of soils, waters, and air before smelters and other industrial facilities are in operation (which are commonly located in disadvantaged communities, for example in East Los Angeles), and especially during property transitions. Elemental and isotopic data can be used to assess legal liability and assist local, State, and national agencies for effective cleanup and proper remediation.


  • Open Access

    Pb and Sr Isotopic Compositions of Soils in Urbanized Industrial Settings, East Los Angeles, California, U.S.A: From Geogenic to Anthropogenic Sources

    by Robert Ayuso, Nora Foley, Jill Johnston, Rani Indela, John Jackson, Damon Bickerstaff

    Preliminary lead and strontium isotopic compositions of soil profiles collected from highly urbanized and industrialized sites were measured to develop a survey of possible sources of lead. Potential lead and strontium sources range from geologic (e.g., bedrock and bedrock-derived soils) to anthropogenic (e.g., vehicular traffic and legacy of burning fossil fuels, heavy metal smelters, manufacturing of paint, plastics, lubricants, residential development, agricultural amendments, atmospheric deposition, etc.). Twenty-one soil profiles were sampled (6 samples/profile site to a depth of 60 cm). Lead concentrations and isotopic compositions (thermal ionization mass spectrometry and inductively coupled mass spectrometry) were measured for bulk soils, acid-leachates, and residues of bulk leaching. The soils include rock-forming silicates (e.g., feldspars, quartz, mafic minerals) and secondary minerals and amorphous materials (e.g., iron-oxyhydroxides, clays, organics). The lead isotopic compositions of acid-leachates of the soils represent lead adsorbed to mineral surfaces or held in soluble minerals (for example, iron- and manganese-hydroxides, and carbonate); soil residues likely reflect feldspar and other rock-forming minerals in bedrock-derived soils. The soils plot as a broad band in 206Pb/207Pb and 208Pb/207Pb space extending from radiogenic values (typical of rock-derived lead (bedrock and bedrock-derived soils) to lower 206Pb/207Pb and 208Pb/207Pb values that likely indicate anthropogenic/industrial types of lead (for example, heavy metal aerosols, leaded paint, agricultural amendments). Lead isotopic values of the Los Angeles soils form a broad band intermediate between values of lead ores from the highly radiogenic U.S. Mississippi Valley type deposits and less radiogenic lead deposits of China. Labile lead (leach fractions from soils) shows a moderate range in values of 206Pb/207Pb ~1.1671 to 1.1928, and 208Pb/207Pb ~2.4319 to 2.4498. Residues overlap the leach compositions and extend to more radiogenic values (rock-derived lead). The lowest values of 206Pb/207Pb (~1.1754) and 208Pb/207Pb (~2.4375) and highest lead contents (~4000 ppm) were measured in soils near where lead was smelted. Higher values of 206Pb/207Pb and 208Pb/207Pb and lower values of lead (~25 ppm) are found in other bulk soils and may represent lead derived from bedrock. The variations in lead isotope values in the soil profiles are consistent with contributions from distinct sources, which include both natural and anthropogenic lead.

  • Open Access

    Surface topography, mineralogical survey, and Pb isotopic compositions of vehicle wheel weights: Major heavy metal contaminants of roadways

    by Nora Foley, Robert Aysuo

    Wheel weights used for balancing tires are among the top five anthropogenic lead (Pb) sources contaminating the surface environment in modern society. In the present study we characterized size, shape, and stages of degradation of wheel weights from the U.S.A. to understand abrasion, dissolution, and transfer of metallic Pb. In a previous study of wheel weights [Ayuso and Foley 2020, Jour. Geochem Explor.], we identified partially abraded and chemically corroded textures with coatings of reconstituted Pb particles, including litharge (PbO) and/or plattnerite (PbO2), in a matrix of clays, feldspars, silica, and iron-oxides. New examples of finely comminuted Pb-rich particles (by Field Emission-Scanning Electron Microscopy) include platy sheaths, rods, and tabular crystals up to about 30 µm in length, slender needles less than ~0.5 µm in width, and submicrometer-sized flakes, chips, and masses of indeterminate form. Abraded Pb oxide particles are mostly <1 µm-size consisting of acicular needles and hair-like crystals; the size and particle shapes can have significant adverse health impacts if ingested, inhaled, or imbedded in the human body. Pb isotope analysis (by Thermal Ionization Mass Spectrometry and High Resolution Inductively Coupled Plasma Mass Spectrometry) provides a way to identify the main lead exposure pathways. Lead isotopic ratios for wheel weights (bulk and acid-leachates) in plots of 206Pb/207Pb (~1.130-1.230) vs. 208Pb/207Pb (~2.410-2.470) are analytically indistinguishable. The 208Pb/207Pb and 206Pb/207Pb data implicate a lead source from Mississippi Valley-type deposits (U.S.A.) and a less radiogenic endmember which may link to an international lead source, such as ore deposits of China. Degradation of wheel weight particles will influence the Pb isotopic composition of local surface and groundwater regardless of whether the contribution is from solid particles derived from grain erosion or from dissolved forms of Pb. Geochemical modelling supports the argument that pH is a primary factor in lead corrosion; however, the range of sizes (<63 µm) and morphologies (needles, hairs) identify an additional health concern associated with intake of weathered products of Pb components found in water and soils. The legacy of past and current uses of Pb metal in manufactured products will continue to be of global concern because these industrial products remain readily available through both primary and secondary global markets.

  • Focus areas for data acquisition for potential domestic resources of 13 critical minerals in the conterminous United States and Puerto Rico — Antimony, barite, beryllium, chromium, fluorspar, hafnium, helium, magnesium, manganese, potash, uranium, vanadium, and zirconium

    by Jane M. Hammarstrom, Connie L. Dicken, Laurel G. Woodruff, Allen K. Andersen, Sean T. Brennan, Warren C. Day, Benjamin J. Drenth, Nora K. Foley, Susan Hall, Albert H. Hofstra, et al.

    The Earth Mapping Resources Initiative (Earth MRI) is conducted in phases to identify areas for acquiring new geologic framework data to identify potential domestic resources of the 35 mineral materials designated as critical minerals for the United States. This report describes the data sources and summary results for 13 critical minerals evaluated in the conterminous United States and Puerto Rico during phase 3 of the study (antimony, barite, beryllium, chromium, fluorspar, hafnium, helium, magnesium, manganese, potash, uranium, vanadium, and zirconium). Phases 1 and 2 of the Earth MRI addressed aluminum, cobalt, graphite, lithium, niobium, platinum-group elements (PGEs), rare earth elements (REEs), tantalum, tin, titanium, and tungsten. Critical minerals in Alaska are covered in a separate report. No focus areas for phase 3 critical minerals are delineated for Hawaii.The geologic, geochemical, topographic, and geophysical mapping provided by the Earth MRI documents geologic features that reflect the extent of individual mineral systems and provides information about critical mineral deposits that may not have been previously considered. The mineral-systems approach links critical mineral commodities to deposit types that represent the manifestations of large mineral systems.Each of the 13 critical mineral commodities for phase 3 of the Earth MRI is discussed in terms of its importance to the Nation’s economy, modes of occurrence, mineral systems, and deposit types, and is accompanied by maps and tables listing examples of focus areas in the conterminous United States and Puerto Rico. Examples of important mineral systems for this group of 13 critical minerals include basin brine path systems for barite and fluorspar, Carlin-type systems and Coeur d’Alene systems for antimony, chemical weathering and volcanogenic seafloor systems for manganese, Climax-type systems for beryllium, mafic magmatic systems for chromium, marine evaporite systems for potash and magnesium, meteoric recharge systems for uranium, petroleum systems for helium, and placer systems for zirconium and hafnium.


  • Focus areas for data acquisition for potential domestic resources of 11 critical minerals in the conterminous United States, Hawaii, and Puerto Rico—Aluminum, cobalt, graphite, lithium, niobium, platinum-group elements, rare earth elements, tantalum, tin, titanium, and tungsten

    by Jane M. Hammarstrom, Connie L. Dicken, Warren C. Day, Albert H. Hofstra, Benjamin J. Drenth, Anjana K. Shah, Anne E. McCafferty, Laurel G. Woodruff, Nora K. Foley, David A. Ponce, et al.

    In response to a need for information on potential domestic sources of critical minerals, the Earth Mapping Resources Initiative (Earth MRI) was established to identify and prioritize areas for acquisition of new geologic mapping, geophysical data, and elevation data to improve our knowledge of the geologic framework of the United States. Phase 1 of Earth MRI concentrated on those geologic terranes favorable for hosting the rare earth elements (REEs). Phase 2 continued to address the REEs and also identified focus areas for potential domestic sources of 10 more of the 35 critical minerals on the U.S. critical minerals list (aluminum, cobalt, graphite, lithium, niobium, platinum-group elements, tantalum, tin, titanium, tungsten). This report describes the methodology, data sources, and summary results for mineral systems that host these 11 critical minerals in the conterminous United States, Hawaii, and Puerto Rico; Alaska is covered in a separate report. The mineral systems framework adopted for this study links critical mineral commodities to families of genetically related mineral deposit types. The mineral systems approach is an efficient approach, providing a simultaneous evaluation of geologic terranes through aggregation of genetically related mineral deposit types that are much larger than individual ore deposits. Geologic, geochemical, topographic, and geophysical mapping provided by Earth MRI will document geologic features that reflect the extent of individual mineral systems and provide information about critical mineral deposits that may not have been recognized previously.Each critical mineral commodity is discussed in terms of importance to the Nation’s economy, modes of occurrence, mineral systems, and deposit types along with maps and tables listing examples of focus areas for each critical mineral. Important mineral systems for these critical minerals include chemical weathering systems for aluminum (bauxite); placer systems for titanium and REEs; metamorphic systems for graphite; mafic magmatic systems for platinum-group elements and cobalt; lacustrine evaporite and porphyry tin systems for lithium; and copper-molybdenum-gold (Cu-Mo-Au) systems for tungsten. REEs occur in many different mineral systems. Focus areas were developed by scientists from the U.S. Geological Survey in collaboration with scientists from State geological surveys and other institutions. This first national-scale compilation of focus areas represents an initial step in addressing the Nation’s critical mineral needs by screening areas for acquisition of new data to provide the geologic framework necessary for identifying domestic sources of critical minerals.


  • Contributors

    by Paola Adamo, Diana Agrelli, Stefano Albanese, E. Louise Ander, Robert A. Ayuso, Piero Bareschino, Harvey E. Belkin, Neil Breward, Domenico Cicchella, Neil Crout, et al.