Mohd Hatta Jopri
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Mohd Hatta Jopri has a total of 63 co-authors. Here are the top co-authors by number of shared publications:
- Tole Sutikno
Universitas Ahmad Dahlan
13 shared publications Auzani Jidin
Faculty of Electrical Engineering, Universiti Teknikal Malaysia Melaka (UTeM), 76100 Durian Tunggal, Malacca, Malaysia
8 shared publicationsA. R. Abdullah
Faculty of Electrical Engineering, Universiti Teknikal Malaysia Melaka (UTeM), Melaka, Malaysia
4 shared publications- Aleksandr N. Skamyin
Saint Petersburg Mining University
4 shared publications Kasrul Abdul Karim
4 shared publicationsNazri Othman
Faculty of Electrical Engineering, Universiti Teknikal Malaysia Melaka, 76100 Durian Tunggal, Malaysia
4 shared publications
Latest Publications
- Open Access
- 1 September 2026
- Published by Institute of Advanced Engineering and Science in International Journal of Applied Power Engineering (IJAPE)
- Vol. 15 (3) , 1484-1498
Explainable AI for harmonic fingerprinting and voltage sag diagnosis in decentralized power grids: trends, challenges and future directions
The evolution of decentralized power grids has increased the complexity of power-quality monitoring, particularly harmonic fingerprinting and voltage sag diagnosis. Artificial intelligence improves disturbance detection and classification, yet black-box models limit transparency, engineering validation, and operator trust. This review synthesizes 108 selected studies on explainable artificial intelligence (XAI) for power-system diagnostics, focusing on SHapley Additive exPlanations (SHAP), local interpretable model-agnostic explanations (LIME), attention-based interpretability, visual analytics, and physics-informed learning. The review integrates harmonic fingerprinting with voltage sag diagnosis through their shared requirements for source attribution, temporal interpretation, physical consistency, and operator-oriented explanation. Four major deployment gaps are identified: data quality, computational latency, physical grounding, and trustworthiness. Future priorities include real-time embedded XAI, physics-informed neural networks, federated learning, standardized trustworthiness metrics, and adaptive model lifecycle management. The findings indicate that reliable autonomous diagnosis requires explainability to be integrated with predictive performance, electrical-system physics, computational efficiency, and field validation. This integration provides a stronger foundation for transparent, resilient, and trustworthy diagnostic systems in decentralized power grids.
- 1 September 2026
- Published by Institute of Advanced Engineering and Science in International Journal of Applied Power Engineering (IJAPE)
- Vol. 15 (3) , 1484-1498
Open AccessExplainable AI for harmonic fingerprinting and voltage sag diagnosis in decentralized power grids: trends, challenges and future directions
The evolution of decentralized power grids has increased the complexity of power-quality monitoring, particularly harmonic fingerprinting and voltage sag diagnosis. Artificial intelligence improves disturbance detection and classification, yet black-box models limit transparency, engineering validation, and operator trust. This review synthesizes 108 selected studies on explainable artificial intelligence (XAI) for power-system diagnostics, focusing on SHapley Additive exPlanations (SHAP), local interpretable model-agnostic explanations (LIME), attention-based interpretability, visual analytics, and physics-informed learning. The review integrates harmonic fingerprinting with voltage sag diagnosis through their shared requirements for source attribution, temporal interpretation, physical consistency, and operator-oriented explanation. Four major deployment gaps are identified: data quality, computational latency, physical grounding, and trustworthiness. Future priorities include real-time embedded XAI, physics-informed neural networks, federated learning, standardized trustworthiness metrics, and adaptive model lifecycle management. The findings indicate that reliable autonomous diagnosis requires explainability to be integrated with predictive performance, electrical-system physics, computational efficiency, and field validation. This integration provides a stronger foundation for transparent, resilient, and trustworthy diagnostic systems in decentralized power grids.
- Open Access
- 1 August 2026
- Published by Institute of Advanced Engineering and Science in Bulletin of Electrical Engineering and Informatics
- Vol. 15 (4) , 3567-3586
Advanced energy storage technologies for renewable power systems: a comprehensive review
The accelerating deployment of renewable energy, particularly solar and wind power, has intensified the need for advanced energy storage systems (ESS) to address intermittency and enhance grid reliability. However, existing reviews often provide fragmented technology comparisons without a unified techno-economic framework for systematic evaluation. This paper presents a comprehensive review of studies published between 2011 and 2025, examining electrochemical, mechanical, thermal, and hydrogen-based energy storage technologies using four standardized metrics: round-trip efficiency (RTE), levelized cost of storage (LCOS), cycle life, and technology readiness level (TRL). Lithium-ion batteries (LIBs) demonstrate the highest maturity and efficiency (RTE: 90–95% and LCOS: 120–200 USD/MWh), whereas sodium-ion batteries offer promising cost reductions of 30–40% through abundant materials and scalable manufacturing. Pumped hydro and compressed air energy storage (CAES) remain suitable for large-scale applications owing to their long service life and scalability, while thermal energy storage (TES) provides cost-effective long-duration storage for concentrated solar power (CSP). Hydrogen-based storage, despite lower RTE (25–45%), offers unique advantages for seasonal energy balancing. Unlike previous reviews, this study integrates techno-economic performance with technology maturity through a TRL-oriented comparative framework, enabling systematic technology assessment based on deployment readiness, economic viability, scalability, and application suitability, thereby supporting informed decision-making and future hybrid energy storage development.
- 1 August 2026
- Published by Institute of Advanced Engineering and Science in Bulletin of Electrical Engineering and Informatics
- Vol. 15 (4) , 3567-3586
Open AccessAdvanced energy storage technologies for renewable power systems: a comprehensive review
The accelerating deployment of renewable energy, particularly solar and wind power, has intensified the need for advanced energy storage systems (ESS) to address intermittency and enhance grid reliability. However, existing reviews often provide fragmented technology comparisons without a unified techno-economic framework for systematic evaluation. This paper presents a comprehensive review of studies published between 2011 and 2025, examining electrochemical, mechanical, thermal, and hydrogen-based energy storage technologies using four standardized metrics: round-trip efficiency (RTE), levelized cost of storage (LCOS), cycle life, and technology readiness level (TRL). Lithium-ion batteries (LIBs) demonstrate the highest maturity and efficiency (RTE: 90–95% and LCOS: 120–200 USD/MWh), whereas sodium-ion batteries offer promising cost reductions of 30–40% through abundant materials and scalable manufacturing. Pumped hydro and compressed air energy storage (CAES) remain suitable for large-scale applications owing to their long service life and scalability, while thermal energy storage (TES) provides cost-effective long-duration storage for concentrated solar power (CSP). Hydrogen-based storage, despite lower RTE (25–45%), offers unique advantages for seasonal energy balancing. Unlike previous reviews, this study integrates techno-economic performance with technology maturity through a TRL-oriented comparative framework, enabling systematic technology assessment based on deployment readiness, economic viability, scalability, and application suitability, thereby supporting informed decision-making and future hybrid energy storage development.
- Open Access
- 31 December 2025
- Published by Institute of Advanced Engineering and Science in Intellectual Journal of Energy Harvesting and Storage
- Vol. 3 (2) , 74-79
Swarm intelligence-based maximum power point tracking algorithms for partial shading in photovoltaic systems
The rapid growth of photovoltaic (PV) technology has intensified the need for efficient energy conversion, particularly under partial shading conditions that frequently occur in real environments. Traditional maximum power point tracking (MPPT) methods, such as perturb and observe (PO), and incremental conductance (INC), often fail to maintain efficiency under rapidly changing shading patterns, leading to power fluctuations, and energy loss. Recent advances have introduced intelligent optimization techniques, including machine learning and simulation-based approaches, to improve MPPT performance. Among these, swarm intelligence (SI)—algorithms inspired by collective behavior in nature—has shown promise in adapting to dynamic operating conditions. However, existing MPPT strategies still struggle to balance fast convergence, global search capability, and stability under severe partial shading. A systematic evaluation of SI algorithms in this context remains limited. This study investigates SI based MPPT algorithms, focusing on particle swarm optimization (PSO), the firefly algorithm (FA), and a hybrid particle swarm–fireworks (PS-FW) method. Comparative analysis demonstrates that SI approaches outperform conventional MPPT techniques in tracking accuracy, convergence speed, and stability under partial shading. By enhancing reliability and efficiency in PV systems, SI based MPPT algorithms contribute to more sustainable energy production. The findings provide design guidelines for robust PV system operation in diverse environmental conditions and support the transition toward smarter renewable energy solutions.
- 31 December 2025
- Published by Institute of Advanced Engineering and Science in Intellectual Journal of Energy Harvesting and Storage
- Vol. 3 (2) , 74-79
Open AccessSwarm intelligence-based maximum power point tracking algorithms for partial shading in photovoltaic systems
The rapid growth of photovoltaic (PV) technology has intensified the need for efficient energy conversion, particularly under partial shading conditions that frequently occur in real environments. Traditional maximum power point tracking (MPPT) methods, such as perturb and observe (PO), and incremental conductance (INC), often fail to maintain efficiency under rapidly changing shading patterns, leading to power fluctuations, and energy loss. Recent advances have introduced intelligent optimization techniques, including machine learning and simulation-based approaches, to improve MPPT performance. Among these, swarm intelligence (SI)—algorithms inspired by collective behavior in nature—has shown promise in adapting to dynamic operating conditions. However, existing MPPT strategies still struggle to balance fast convergence, global search capability, and stability under severe partial shading. A systematic evaluation of SI algorithms in this context remains limited. This study investigates SI based MPPT algorithms, focusing on particle swarm optimization (PSO), the firefly algorithm (FA), and a hybrid particle swarm–fireworks (PS-FW) method. Comparative analysis demonstrates that SI approaches outperform conventional MPPT techniques in tracking accuracy, convergence speed, and stability under partial shading. By enhancing reliability and efficiency in PV systems, SI based MPPT algorithms contribute to more sustainable energy production. The findings provide design guidelines for robust PV system operation in diverse environmental conditions and support the transition toward smarter renewable energy solutions.
- Open Access
- 1 June 2024
- Published by Institute of Advanced Engineering and Science in Bulletin of Electrical Engineering and Informatics
- Vol. 13 (3) , 1483-1494
Energy management in hybrid complexes based on wind generation and hydrogen storage
This work is devoted to the analysis of scientific articles in the field of hybrid energy complexes based on hydrogen technologies and renewable energy sources. A special attention is given to wind generation. The review of the topics of scientific publications indexed in the Scopus database in the field of research is carried out, the most frequently encountered topics and the rarest ones are highlighted. Brief statistics about publications selected for detailed analysis are given. The most interesting direction for studying is development of control systems for hybrid energy complexes. Several traditional approaches, which are commonly used in research on this topic and methods are highlighted. The existing shortcomings and inaccuracies in the overviewed works are identified. Conclusions are drawn about the need to transform existing methods and specific proposals are made to improve management systems to increase the efficiency of decision-making and achieve greater economic benefits. Promising areas of research that also require special attention are formulated.
- 1 June 2024
- Published by Institute of Advanced Engineering and Science in Bulletin of Electrical Engineering and Informatics
- Vol. 13 (3) , 1483-1494
Open AccessEnergy management in hybrid complexes based on wind generation and hydrogen storage
This work is devoted to the analysis of scientific articles in the field of hybrid energy complexes based on hydrogen technologies and renewable energy sources. A special attention is given to wind generation. The review of the topics of scientific publications indexed in the Scopus database in the field of research is carried out, the most frequently encountered topics and the rarest ones are highlighted. Brief statistics about publications selected for detailed analysis are given. The most interesting direction for studying is development of control systems for hybrid energy complexes. Several traditional approaches, which are commonly used in research on this topic and methods are highlighted. The existing shortcomings and inaccuracies in the overviewed works are identified. Conclusions are drawn about the need to transform existing methods and specific proposals are made to improve management systems to increase the efficiency of decision-making and achieve greater economic benefits. Promising areas of research that also require special attention are formulated.
- Open Access
- 1 January 2024
- Published by Institute of Advanced Engineering and Science in Indonesian Journal of Electrical Engineering and Computer Science
- Vol. 33 (1) , 31-41
Impedance analysis of squirrel-cage induction motor at high harmonics condition
This study examines different methodologies for representing an asynchronous motor at higher harmonics by utilizing its equivalent circuit. Several approaches were compared based on simulation modeling. An experimental investigation was conducted in a laboratory setting using asynchronous electric motors with power ratings of 1.5 kW and 5.5 kW. The purpose of this investigation was to examine the characteristics of impedance in the presence of high-harmonic conditions. The generation of higher harmonics was achieved through the utilization of a precisely regulated thyristor rectifier in conjunction with a thyristor power controller. The findings indicate that the load on the shaft solely impacts the resistance at the fundamental harmonic, while the resistance at higher harmonics remains unaffected by the operating mode of the asynchronous motor (AM).
- 1 January 2024
- Published by Institute of Advanced Engineering and Science in Indonesian Journal of Electrical Engineering and Computer Science
- Vol. 33 (1) , 31-41
Open AccessImpedance analysis of squirrel-cage induction motor at high harmonics condition
This study examines different methodologies for representing an asynchronous motor at higher harmonics by utilizing its equivalent circuit. Several approaches were compared based on simulation modeling. An experimental investigation was conducted in a laboratory setting using asynchronous electric motors with power ratings of 1.5 kW and 5.5 kW. The purpose of this investigation was to examine the characteristics of impedance in the presence of high-harmonic conditions. The generation of higher harmonics was achieved through the utilization of a precisely regulated thyristor rectifier in conjunction with a thyristor power controller. The findings indicate that the load on the shaft solely impacts the resistance at the fundamental harmonic, while the resistance at higher harmonics remains unaffected by the operating mode of the asynchronous motor (AM).
- Open Access
- 1 December 2023
- Published by Institute of Advanced Engineering and Science in Bulletin of Electrical Engineering and Informatics
- Vol. 12 (6) , 3202-3214
Estimation of hourly solar irradiation on tilted surfaces
Tilted photovoltaic panel (PVP) are extensively utilized in solar power installations. To model and design them, you must understand the solar irradiation on a tilted surface over time scales of an hour, day, week, month, or other period. However, most meteorological stations only record global horizontal irradiance (GHI). In this research, a method is proposed for translating hourly worldwide horizontal irradiation from the NASA POWER database into hourly global sun irradiation on a tilted surface utilizing regression analysis methods and numerical modeling methods based on an isotropic model of solar irradiation. In addition, this work proposes a method for establishing the regression reliance of the diffuse transmittance index on the clearness index for geographic areas where this relationship has not yet been empirically proven. To assess effectiveness, the results of the proposed technique and other authors' methods are compared with monthly average NASA POWER climatological data using evaluation methods such as mean bias error (MBE), mean absolute bias error (MABE), and root-mean-square error (RMSE). The study's findings can be used to construct, optimize, or anticipate the functioning of solar power facilities at any angle of tilt and in any geographic area.
- 1 December 2023
- Published by Institute of Advanced Engineering and Science in Bulletin of Electrical Engineering and Informatics
- Vol. 12 (6) , 3202-3214
Open AccessEstimation of hourly solar irradiation on tilted surfaces
Tilted photovoltaic panel (PVP) are extensively utilized in solar power installations. To model and design them, you must understand the solar irradiation on a tilted surface over time scales of an hour, day, week, month, or other period. However, most meteorological stations only record global horizontal irradiance (GHI). In this research, a method is proposed for translating hourly worldwide horizontal irradiation from the NASA POWER database into hourly global sun irradiation on a tilted surface utilizing regression analysis methods and numerical modeling methods based on an isotropic model of solar irradiation. In addition, this work proposes a method for establishing the regression reliance of the diffuse transmittance index on the clearness index for geographic areas where this relationship has not yet been empirically proven. To assess effectiveness, the results of the proposed technique and other authors' methods are compared with monthly average NASA POWER climatological data using evaluation methods such as mean bias error (MBE), mean absolute bias error (MABE), and root-mean-square error (RMSE). The study's findings can be used to construct, optimize, or anticipate the functioning of solar power facilities at any angle of tilt and in any geographic area.
- Open Access
- 1 December 2023
- Published by Institute of Advanced Engineering and Science in Bulletin of Electrical Engineering and Informatics
- Vol. 12 (6) , 3271-3278
Evaluation of three consumers' contribution to the current and voltage distortions at the point of common coupling
The article presents the method to evaluate share responsibility for the generation of harmonic currents between utility and consumer that are connected to the same point of common coupling (PCC). For these purposes, an indicator that evaluates the consumer's contribution to the distortion of current and voltage at the PCC is proposed, based on the previously carried out mathematical modeling of the power supply system (PSS) with two consumers. An evaluation of the distortion caused by three different non-linear loads on the consumers’ side is carried out in this study. The approbation of the proposed method was carried out on a laboratory bench, where various operation modes of linear and nonlinear loads were studied. Thus, the results proved that the proposed method could quantify the contribution of voltage and current distortion caused by three and more non-linear loads at the PCC of the consumer’s side. Besides, this proposed method can also be used to draw up recommendations for the mitigation of the harmonic currents compensation.
- 1 December 2023
- Published by Institute of Advanced Engineering and Science in Bulletin of Electrical Engineering and Informatics
- Vol. 12 (6) , 3271-3278
Open AccessEvaluation of three consumers' contribution to the current and voltage distortions at the point of common coupling
The article presents the method to evaluate share responsibility for the generation of harmonic currents between utility and consumer that are connected to the same point of common coupling (PCC). For these purposes, an indicator that evaluates the consumer's contribution to the distortion of current and voltage at the PCC is proposed, based on the previously carried out mathematical modeling of the power supply system (PSS) with two consumers. An evaluation of the distortion caused by three different non-linear loads on the consumers’ side is carried out in this study. The approbation of the proposed method was carried out on a laboratory bench, where various operation modes of linear and nonlinear loads were studied. Thus, the results proved that the proposed method could quantify the contribution of voltage and current distortion caused by three and more non-linear loads at the PCC of the consumer’s side. Besides, this proposed method can also be used to draw up recommendations for the mitigation of the harmonic currents compensation.
- Open Access
- 4 May 2023
- Published by Saint-Petersburg Mining University in Journal of Mining Institute
- Vol. Online fir, 443-454
Determination of the grid impedance in power consumption modes with harmonics
DOI: 10.31897/PMI.2023.25 The paper investigates the harmonic impedance determination of the power supply system of a mining enterprise. This parameter is important when calculating modes with voltage distortions, since the determined parameters of harmonic currents and voltages significantly depend on its value, which allow the most accurate modeling of processes in...
- 4 May 2023
- Published by Saint-Petersburg Mining University in Journal of Mining Institute
- Vol. Online fir, 443-454
Open AccessDetermination of the grid impedance in power consumption modes with harmonics
DOI: 10.31897/PMI.2023.25 The paper investigates the harmonic impedance determination of the power supply system of a mining enterprise. This parameter is important when calculating modes with voltage distortions, since the determined parameters of harmonic currents and voltages significantly depend on its value, which allow the most accurate modeling of processes in...
- Open Access
- 1 September 2022
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 13 (3) , 1277-1284
Milestone of the most used maximum power point tracking in solar harvesting system
Solar harvesting system with photovoltaic (PV) is one of the most desirable renewable energy sources because of its prominent advantages. However, low efficiency due to fluctuating output power is a major problem for PV systems. A technique used to maximize power extraction known as maximum power point tracking (MPPT) has been proposed by various literature to deal with this problem. One of the most widely developed MPPT methods due to its ease of implementation is perturb and observe (P&O). Since the initial discovery of the principle, the P&O method has been extensively modified including the fixed step-size: step-size variables, partial shading, threshold module current, three-point-comparison, maximization of dynamic performance, minimization of dynamic performance, bandwidth of 𝑃 − 𝑉 curve, decoupling, observation of 𝑑𝑉, 𝑑𝐼, and 𝑑𝑃, datasheet parameters, curve fitting, voltage hold P&O, and observation of 𝑑𝑉 and 𝑑𝑃. This paper presents the development of the P&O method from the initial principle to the end as a reference source for readers. The hope is that a new easy and robust P&O method as a complement to the implementation of the MPPT technique is developed in the solar harvesting system.
- 1 September 2022
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 13 (3) , 1277-1284
Open AccessMilestone of the most used maximum power point tracking in solar harvesting system
Solar harvesting system with photovoltaic (PV) is one of the most desirable renewable energy sources because of its prominent advantages. However, low efficiency due to fluctuating output power is a major problem for PV systems. A technique used to maximize power extraction known as maximum power point tracking (MPPT) has been proposed by various literature to deal with this problem. One of the most widely developed MPPT methods due to its ease of implementation is perturb and observe (P&O). Since the initial discovery of the principle, the P&O method has been extensively modified including the fixed step-size: step-size variables, partial shading, threshold module current, three-point-comparison, maximization of dynamic performance, minimization of dynamic performance, bandwidth of 𝑃 − 𝑉 curve, decoupling, observation of 𝑑𝑉, 𝑑𝐼, and 𝑑𝑃, datasheet parameters, curve fitting, voltage hold P&O, and observation of 𝑑𝑉 and 𝑑𝑃. This paper presents the development of the P&O method from the initial principle to the end as a reference source for readers. The hope is that a new easy and robust P&O method as a complement to the implementation of the MPPT technique is developed in the solar harvesting system.
- Open Access
- 1 June 2022
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 13 (2)
An assessment of the share contributions of distortion sources for various load parameters
The method for assessing the contributions of distortion sources based on measuring consumer currents and calculating their projections onto the supply current vector is considered in the paper. Determination of contributions is carried out on the basis of the developed model of an industrial enterprise in the food industry in MATLAB Simulink software. This study presents various cases of simulation, including variable parameters of linear and non-linear consumer load, changes in parameters of external distortion sources and passive harmonic filters. It is shown that the considered method gives correct results in the absence of external distortions in the electrical grid. The considered criteria for the share contributions make it possible to estimate the most efficient place for installing a passive filter in the absence of external distortions. An indicator for evaluating external distortions has also been developed based on calculating the projection of the harmonic system current onto the harmonic current of the shunt filter at the considered frequency.
- 1 June 2022
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 13 (2)
Open AccessAn assessment of the share contributions of distortion sources for various load parameters
The method for assessing the contributions of distortion sources based on measuring consumer currents and calculating their projections onto the supply current vector is considered in the paper. Determination of contributions is carried out on the basis of the developed model of an industrial enterprise in the food industry in MATLAB Simulink software. This study presents various cases of simulation, including variable parameters of linear and non-linear consumer load, changes in parameters of external distortion sources and passive harmonic filters. It is shown that the considered method gives correct results in the absence of external distortions in the electrical grid. The considered criteria for the share contributions make it possible to estimate the most efficient place for installing a passive filter in the absence of external distortions. An indicator for evaluating external distortions has also been developed based on calculating the projection of the harmonic system current onto the harmonic current of the shunt filter at the considered frequency.