VFVolodymyr Falshtynskyi

Volodymyr Falshtynskyi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Volodymyr Falshtynskyi has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Analytical justification of the thermochemical interaction between blast reagents and carbon-containing products under the influence of magnetic fields

    by V. H Lozynskyi, V. S Falshtynskyi

    Purpose. To justify and develop a model that describes the effect of magnetic treatment of blast reagents and carbon-containing products on the gasification process for predicting the intensification of gas formation. Methodology. The study involves theoretical modeling based on experimental data to investigate the influence of magnetic fields on the underground coal gasification process and co-gasification of coal and carbon-containing products. The Arrhenius equation was used to estimate the rate constants of gasification reactions in the temperature range of 800–1,000 °C. The effect of the magnetic field was incorporated by adjusting the activation energy (Ea). The results of analytical and experimental studies were processed using methods of computer and mathematical modeling. Findings. The results show that the application of magnetic fields significantly intensifies the gasification process of carbon containing products. Increasing the reactivity of the blast reagents, particularly water and oxygen, leads to a higher overall yield of combustible gases. The use of magnetic fields in the gasification process substantially increases the reaction rate (k) due to the reduction in activation energy (Ea), improving the overall efficiency of gasification. Originality. For the first time, an analytical model has been developed to describe the effect of magnetic treatment of blast reagents and carbon-containing products on the gasification process in the temperature range of 800–1,000 °C. The obtained reaction rates follow an exponential trend. The established and correlation-validated pattern shows the relationship between changes in the approximation coefficient (F ) and the change in the carbon fraction (C, %) during the magnetic treatment of blast components within the specified temperature range. Practical value. The results of this study can be applied to enhance the efficiency of industrial gasification processes, particularly underground coal gasification and co-gasification of coal and carbon-containing productss.


  • Technological parameters of coal extraction concentration processes for thin seams

    by Roman Dychkovskyi, Iaroslav Shavarskyi, Pavlo Saik, Volodymyr Falshtynskyi, Vasyl Lozynskyi, Andrii Pererva

    The issue of intensifying coal mining processes, while justifying appropriate technological support and integrating all aspects of the accompanying mining activities at mines with opportunities for future development, is addressed. The parameters for concentrating mining operations in the pillar system for developing coal seams with paired lavas are substantiated by assessing stress within the mine field section. The regularities of force and deformation parameters on mechanized supports during the operation of paired benches have been established. Recommendations have been developed regarding optimal parameters for conducting mining operations and methods for managing the roof during the concentration of mining operations in the pillar system for developing a coal seam with paired lavas. The technical and economic efficiency of the proposed solutions is demonstrated using examples from mines in the Lviv-Volyn coal basin. This publication targets a wide audience, including employees of research institutes and project organizations, engineering and technical staff at mining enterprises. It also provides valuable insights for educators, graduate students, masters, and undergraduates specializing in mining at higher education institutions.

  • Determining the parameters of stratification cavity in rock mass to extract mine methane

    by V Falshtynskyi, P Saik, V Lozynskyi, B Toleuov, V Sulaiev, V Buketov

    Purpose. Substantiation of the stress-strain parameters of a rock mass state to identify potential mine methane accumulation in the roof rocks of the extraction pillar. Methodology. Characterization of stratification cavity in rock mass for mine methane extraction relied upon analytical studies. The research is based on a method by Professor O.V. Savostyanov to calculate a stress-strain state of rocks. The method has been implemented in GeoDenamics Lite software. The use of the method helps obtain both geometrical and physical parameters of load characteristics for typical rock layers from the coal seam up to the surface. The abovementioned makes it possible to identify areas of rock stratification, coal bench being flaked away, and the number of rock layers after stratification. Mining and geological conditions of the coal seam occurrence and mining technology are the output data for the research. Findings. Analysis of geometrical and physical parameters of load characteristics on the roof rocks of a coal seam has supported the fact that abnormal pressure areas propagate within the rock mass. The listed parameters vary from a seam up to the surface normally both towards the rock mass and towards the mined-out area along with the stope advance. The abovementioned helps define parameters of stratification cavity formation within the roof rocks of an extraction pillar since the cavities may accumulate mine methane. Originality. Dependencies of the changes in rock layer subsidence height have been derived based upon formation dynamics of the mined-out longwall volume. Regularities of changes in volumes of rock formation stratification cavities have been identified depending upon the strength and thickness of the rock layers; closeness to mining area; and stope advance velocity as well as its length. Practical value. Based upon the method by Professor O.V.Savostyanov, an algorithm has been proposed to define possible mine methane accumulations after mining operations within the extraction pillar are completed. Hence, the areas of methane accumulation will be considered in future as extra sources of fuel material. At the same time, it has been proposed to complement operation mode of a mining enterprise with biogas plants if the produced mine mixture is poor. A technological scheme for the combined mine methane-biogas extraction has been provided.

  • Management of the longwall face advance on the stress-strain state of rock mass

    by Iaroslav Shavarskyi, Volodymyr Falshtynskyi, Roman Dychkovskyi, Oleksandr Akimov, Dariusz Sala, Valentyn Buketov

    Purpose is to study influence of a longwall face advance on the geomechanical situation in the neighbourhood of a mining site based upon determination of changes in standard and critical subsidence of the immediate roof rocks. Methods. To study a geomechanical situation in the neighbourhood of a mining site the authors have applied software product GeoDenamics Lite developed at Dnipro University of Technology. The software product relies upon a calculation procedure of stress-strain state of rocks by Professor O.V. Savostianov. Expediency of the software selection is based upon the supported control and adaptation of a coal mining technique to changes in geodynamic stress fields in the anisotropic rock-coal medium impacting temporal and spatial changes in the technological parameters. Findings. The basic problems have been singled out connected with certain changes in a longwall face advance. For the first time, an analytical scheme of tangential stresses within the immediate roof rocks has been developed for Lisova mine of SE Lvivvuhillia under the conditions of coal seam mining by means of the paired longwalls which makes it possible to determine both physical and geometrical parameters of standard loads within the formation. Originality. Dependencies of temporal and spatial changes in subsidences and horizontal displacements of rock layers of the immediate roof have been defined being 5.2 m for the upper rock pack and 3.9 m for the lower pack if the longwall longwall face advance is 1.9 up to 4.8 m/day. Both physical and geometrical parameters of the reference pressure have been defined as well as the parameters of lower sandstone pack in the process of the main roof subsidence. Impact of the extra pressure forces on the immediate roof rocks has been analyzed at the moment of critical lowerings of the immediate roof rocks. In this context, standard loading from the overlying formation in addition to tangential stresses in the roof result in rock failure due to vertical cracks above a longwall face. Practical implications. The engineering methods have been developed making it possible to identify impact parameters of a longwall face advance on the geomechanical situation in the neighbourhood of a mining site. In future, it will help forecast changes in the reference pressure around a longwall face while preventing emergency settlement of the powered support.


  • Aspects for implementing the cumulative energy systems during underground coal gasification

    by V Falshtynskyi, P Saik, R Dychkovskyi, V Lozynskyi, M Demydov

    Purpose. An innovative approach formulation to the rational development of the potential of coal mines to expand the economic activity of mining enterprises based on the implementation of underground heat generators during coal gasification. Methods. Based on the conducted analytical and laboratory research, to study the possibility of introducing underground heat generators and cogeneration systems during gasification of coal at the site of its occurrence. The basis for conducting analytical studies is the experience of implementing the specified modules and cogeneration plants. The basis for laboratory research is a laboratory setup that allows modeling the behavior of thermochemical and geomechanical processes in the resulting gas generator, depending on the mining-geological conditions of the coal seam occurrence, methods and ways of supplying injected blast mixtures to the fire face mirror. Findings. Current issues of implementing the cumulative energy systemsbased on mining enterprises are highlighted. It has been determined that a possible basis for expanding the range of economic activity at a coal-mining enterprise is the implementation of underground gasification technology. The main products of the latter are producer gas, thermal energy and chemical raw materials. The parameters of changing the temperature field in the immediate bottom of the underground gas generator and the producer gas temperature at the outlet from the gas production borehole have been studied. On the basis of their changes, the technological schemes of the underground heat generator are proposed. This makes it possible to use technogenic thermal energy both in the process of coal gasification and at the stage of attenuation of an underground gas generator, as well as a scheme of a cogeneration system with heat accumulation from products of borehole underground coal gasification (BUCG). Originality. An innovative approach has been developed to the rational technogenic thermal energy development during coal gasification at the site of its occurrence. Practical implications. The implementation of cumulative energy systems based on underground heat generators during coal gasification at the site of its occurrence and the subsequent use of thermal technogenic environment allow creating compact energy modules that can satisfy the energy needs of a mining enterprise.


  • Efficiency of underground gas generator in consideration of the reverse mode

    by P. B Saik, V. S Falshtynskyi, V. H Lozynskyi, E.C Cabana, M.S Demydov, R.O Dychkovskyi

    Efficiency of underground gas generator in consideration of the reverse mode

  • Research into stress-strain state of the rock mass condition in the process of the operation of double-unit longwalls

    by Roman Dychkovskyi, Iaroslav Shavarskyi, Pavlo Saik, Vasyl Lozynskyi, Volodymyr Falshtynskyi, Edgar Cabana


  • Substantiation into “rock massive – underground gasifier” system adaptability of Solenovskyi site in the Donetsk coal basin

    by V.S. Falshtynskyi, R.O. Dychkovskyi, P.B. Saik, V.H. Lozynskyi, E.C. Cabana

    Substantiation into “rock massive – underground gasifier” system adaptability of Solenovskyi site in the Donetsk coal basin


  • Open Access

    Innovative aspects of underground coal gasification technology in mine conditions

    by National Mining University, V Falshtynskyi, P Saik, V Lozynskyi, R Dychkovskyi, M Petlovanyi


  • Development the concept of borehole underground coal gasification technology in Ukraine

    by R Dychkovskyi, V Falshtynskyi, V Lozynskyi, P Saik

    In the article results of analytical, laboratory and bench test researches presented. The present paper deals with the creation of generator gas from coal seams in-situ. It is proposed to use received results to intensify underground coal gasification process. The results of laboratory and bench test experimental researches are presented in the form of graphs and tables. The conclusions are drawn at the end of the paper with perspective trends for future studies.