ADAndrew Doran

Andrew Doran

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Andrew Doran has a total of 309 co-authors. Here are the top co-authors by number of shared publications:

  • Andreas Scholl

    Advanced Light Source, Lawrence Berkeley National Laboratory, Berkeley, California 94720, USA

    27 shared publications
  • Simon Penner

    Department of Physical Chemistry, University of Innsbruck, Innsbruck, Austria

    11 shared publications
  • Aleksander Gurlo

    Technische Universität Berlin, Chair of Advanced Ceramic Materials, Straße des 17. Juni 135, 10623 Berlin, Germany

    10 shared publications
  • Lukas Schlicker

    Technische Universität Berlin Faculty III Process Sciences, Institute of Materials Science and Technology, Chair of Advanced Ceramic Materials Berlin Germany

    10 shared publications
  • A. Scholl

    Advanced Light Source, Lawrence Berkeley National Laboratory, One Cyclotron Road, Berkeley, California 94720, USA

    9 shared publications
  • Maged F. Bekheet

    Technische Universität Berlin, Faculty III Process Sciences, Institute of Materials Science and Technology, Chair of Advanced Ceramic Materials, Straße des 17. Juni 135, 10623 Berlin, Germany

    9 shared publications

Latest Publications

  • Open Access

    Elucidating the role of earth alkaline doping in perovskite-based methane dry reforming catalysts

    by Parastoo Delir Kheyrollahi Nezhad, Maged F. Bekheet, Nicolas Bonmassar, Albert Gili, Franz Kamutzki, Aleksander Gurlo, Andrew Doran, Sabine Schwarz, Johannes Bernardi, Sebastian Praetz, et al.

    To elucidate the role of earth alkaline doping in perovskite-based dry reforming of methane (DRM) catalysts, we embarked on a comparative and exemplary study of a Ni-based Sm perovskite with and without Sr doping. While the Sr-doped material appears as a structure-pure Sm1.5Sr0.5NiO4 Ruddlesden Popper structure, the undoped material is a NiO/monoclinic Sm2O3 composite. Hydrogen pre-reduction or direct activation in the DRM mixture in all cases yields either active Ni/Sm2O3 or Ni/Sm2O3/SrCO3 materials, with albeit different short-term stability and deactivation behavior. The much smaller Ni particle size after hydrogen reduction of Sm1.5Sr0.5NiO4, and of generally all undoped materials stabilizes the short and long-term DRM activity. Carbon dioxide reactivity manifests itself in the direct formation of SrCO3 in the case of Sm1.5Sr0.5NiO4, which is dominant at high temperatures. For Sm1.5Sr0.5NiO4, the CO : H2 ratio exceeds 1 at these temperatures, which is attributed to faster direct carbon dioxide conversion to SrCO3 without catalytic DRM reactivity. As no Sm2O2CO3 surface or bulk phase as a result of carbon dioxide activation was observed for any material – in contrast to La2O2CO3 – we suggest that oxy-carbonate formation plays only a minor role for DRM reactivity. Rather, we identify surface graphitic carbon as the potentially reactive intermediate. Graphitic carbon has already been shown as a crucial reaction intermediate in metal-oxide DRM catalysts and appears both for Sm1.5Sr0.5NiO4 and NiO/monoclinic Sm2O3 after reaction as crystalline structure. It is significantly more pronounced for the latter due to the higher amount of oxygen-deficient monoclinic Sm2O3 facilitating carbon dioxide activation. Despite the often reported beneficial role of earth alkaline dopants in DRM catalysis, we show that the situation is more complex. In our studies, the detrimental role of earth alkaline doping manifests itself in the exclusive formation of the sole stable carbonated species and a general destabilization of the Ni/monoclinic Sm2O3 interface by favoring Ni particle sintering.


  • Open Access

    Steering the methanol steam reforming performance of Cu/ZrO2 catalysts by modification of the Cu-ZrO2 interface dimensions resulting from Cu loading variation

    by Kevin Ploner, Parastoo Delir Kheyrollahi Nezhad, Maximilian Watschinger, Lukas Schlicker, Maged F. Bekheet, Aleksander Gurlo, Albert Gili, Andrew Doran, Sabine Schwarz, Michael Stöger-Pollach, et al.


  • Open Access

    Steering the methanol steam reforming reactivity of intermetallic Cu–In compounds by redox activation: stability vs. formation of an intermetallic compound–oxide interface

    by Kevin Ploner, Andrew Doran, Martin Kunz, Albert Gili, Aleksander Gurlo, Nicolas Köwitsch, Marc Armbrüster, Johannes Bernardi, Maximilian Watschinger, Simon Penner

    To compare the inherent methanol steam reforming properties of intermetallic compounds and a corresponding intermetallic compound–oxide interface, we selected the Cu–In system as a model to correlate the stability limits, self-activation and redox activation properties with the catalytic performance. Three distinct intermetallic Cu–In compounds – Cu7In3, Cu2In and Cu11In9 – were studied both in an untreated and redox-activated state resulting from alternating oxidation–reduction cycles. The stability of all studied intermetallic compounds during methanol steam reforming (MSR) operation is essentially independent of the initial stoichiometry and all accordingly resist substantial structural changes. The inherent activity under batch MSR conditions is highest for Cu2In, corroborating the results of a Cu2In/In2O3 sample accessed through reactive metal–support interaction. Under flow MSR operation, Cu7In3 displays considerable deactivation, while Cu2In and Cu11In9 feature stable performance at simultaneously high CO2 selectivity. The missing significant self-activation is most evident in the operando thermogravimetric experiments, where no oxidation is detected for any of the intermetallic compounds. In situ X-ray diffraction allowed us to monitor the partial decomposition and redox activation of the Cu–In intermetallic compounds into Cu0.9In0.1/In2O3 (from Cu7In3), Cu7In3/In2O3 (from Cu2In) and Cu7In3/Cu0.9In0.1/In2O3 (from Cu11In9) interfaces with superior MSR performance compared to the untreated samples. Although the catalytic profiles appear surprisingly similar, the latter interface with the highest indium content exhibits the least deactivation, which we explain by formation of stabilizing In2O3 patches under MSR conditions.


  • Open Access

    The sol–gel autocombustion as a route towards highly CO2-selective, active and long-term stable Cu/ZrO2 methanol steam reforming catalysts

    by Kevin Ploner, Parastoo Delir Kheyrollahi Nezhad, Albert Gili, Franz Kamutzki, Aleksander Gurlo, Andrew Doran, Pengfei Cao, Marc Heggen, Nicolas Köwitsch, Marc Armbrüster, et al.

    The adaption of the sol–gel autocombustion method to the Cu/ZrO2 system opens new pathways for the specific optimisation of the activity, long-term stability and CO2 selectivity of methanol steam reforming (MSR) catalysts.


  • A tungsten external heater for BX90 diamond anvil cells with a range up to 1700 K

    by J. Yan, A. Doran, A. A. MacDowell, B. Kalkan

    Resistive heating of a sample in a diamond anvil cell (DAC) can generate a homogeneous temperature field across the sample chamber with reliable temperatures measured by a thermocouple. It is of importance in experiments aiming at exploring phase diagrams and quantifying thermoelastic properties of materials. Here, we present a ring-heater design developed for BX90 diamond anvil cells (DACs). It is made of a ring-shaped aluminum oxide holder hosting a tungsten wire coil inside and coupled with Ar + 2% H2 gas to prevent oxidation during experiment. This modular plug-and-play design enables in situ studies of samples via x-ray diffraction up to a temperature of 1700 K. Temperature in the BX90 sample volume as measured through a thermocouple was calibrated using the melting point of gold. As an application of this design, we report the thermal expansion coefficient of MgO at 9.5(1) GPa.


  • Open Access

    Carbide-Modified Pd on ZrO2 as Active Phase for CO2-Reforming of Methane—A Model Phase Boundary Approach

    by Norbert Köpfle, Kevin Ploner, Peter Lackner, Thomas Götsch, Christoph Thurner, Emilia Carbonio, Michael Hävecker, Axel Knop-Gericke, Lukas Schlicker, Andrew Doran, et al.

    Starting from subsurface Zr0-doped “inverse” Pd and bulk-intermetallic Pd0Zr0 model catalyst precursors, we investigated the dry reforming reaction of methane (DRM) using synchrotron-based near ambient pressure in-situ X-ray photoelectron spectroscopy (NAP-XPS), in-situ X-ray diffraction and catalytic testing in an ultrahigh-vacuum-compatible recirculating batch reactor cell. Both intermetallic precursors develop a Pd0–ZrO2 phase boundary under realistic DRM conditions, whereby the oxidative segregation of ZrO2 from bulk intermetallic PdxZry leads to a highly active composite layer of carbide-modified Pd0 metal nanoparticles in contact with tetragonal ZrO2. This active state exhibits reaction rates exceeding those of a conventional supported Pd–ZrO2 reference catalyst and its high activity is unambiguously linked to the fast conversion of the highly reactive carbidic/dissolved C-species inside Pd0 toward CO at the Pd/ZrO2 phase boundary, which serves the role of providing efficient CO2 activation sites. In contrast, the near-surface intermetallic precursor decomposes toward ZrO2 islands at the surface of a quasi-infinite Pd0 metal bulk. Strongly delayed Pd carbide accumulation and thus carbon resegregation under reaction conditions leads to a much less active interfacial ZrO2–Pd0 state.


  • Open Access

    Nucleation of Dislocations in 3.9 nm Nanocrystals at High Pressure

    by Abhinav Parakh, Sangryun Lee, K. Anika Harkins, Mehrdad T. Kiani, David Doan, Martin Kunz, Andrew Doran, Lindsey A. Hanson, Seunghwa Ryu, X. Wendy Gu

    As circuitry approaches single nanometer length scales, it has become important to predict the stability of single nanometer-sized metals. The behavior of metals at larger scales can be predicted based on the behavior of dislocations, but it is unclear if dislocations can form and be sustained at single nanometer dimensions. Here, we report the formation of dislocations within individual 3.9 nm Au nanocrystals under nonhydrostatic pressure in a diamond anvil cell. We used a combination of x-ray diffraction, optical absorbance spectroscopy, and molecular dynamics simulation to characterize the defects that are formed, which were found to be surface-nucleated partial dislocations. These results indicate that dislocations are still active at single nanometer length scales and can lead to permanent plasticity.


  • Open Access

    Real-time direct transmission electron microscopy imaging of phase and morphology transformation from solid indium oxide hydroxide to hollow corundum-type indium oxide nanocrystallites

    by Lukas Schlicker, Radian Popescu, Maged F. Bekheet, Andrew Doran, Dagmar Gerthsen, Aleksander Gurlo

    This work clarifies the mechanism of the formation of hollow nanostructures (nanotubes and nanospheres) during the InOOH to rh-In 2 O 3 transformation.


  • Crystallographic and electronic evolution of lanthanum strontium ferrite (La0.6Sr0.4FeO3−δ) thin film and bulk model systems during iron exsolution

    by Thomas Götsch, Norbert Köpfle, Matthias Grünbacher, Johannes Bernardi, Emilia A. Carbonio, Michael Hävecker, Axel Knop-Gericke, Maged F. Bekheet, Lukas Schlicker, Andrew Doran, et al.

    We study the changes in the crystallographic phases and in the chemical states during the iron exsolution process of lanthanum strontium ferrite (LSF, La0.6Sr0.4FeO3−δ).


  • Open Access

    On the structural stability of crystalline ceria phases in undoped and acceptor-doped ceria materials under in situ reduction conditions

    by Maged F. Bekheet, Matthias Grünbacher, Lukas Schlicker, Albert Gili, Andrew Doran, Jan Dirk Epping, Aleksander Gurlo, Bernhard Klötzer, Simon Penner

    Pure and acceptor-doped CeO2 materials undergo different sequences of structural transformations during hydrogen treatment without crystalline hydride formation.