Brad M. Angel
Brad M. Angel has a total of 52 co-authors. Here are the top co-authors by number of shared publications:
- Stuart L. Simpson
CSIRO Land and Water, Lucas Heights, NSW 2234, Australia
10 shared publications - Dianne F. Jolley
School of Chemistry, University of Wollongong, NSW, 2522, Australia
9 shared publications Graeme E. Batley
ACSIRO Land and Water, Locked Bag 2007, Kirrawee, NSW 2232, Australia
6 shared publicationsSimon C. Apte
ACSIRO Land and Water, Locked Bag 2007, Kirrawee, NSW 2232, Australia
6 shared publications- Anthony A. Chariton
School of Natural Sciences, Macquarie University, Sydney, Australia
2 shared publications Chad V. Jarolimek
2 shared publications
Latest Publications
- Open Access
- 27 November 2020
- Published by CSIRO Publishing in Environmental Chemistry
- Vol. 18 (1) , 1-11
Geochemical factors affecting the solubility of copper in seawater
Environmental context: Many trace metals, including copper, are only sparingly soluble in seawater and may exist in both dissolved and particulate forms (e.g. as precipitates). Aquatic organisms may experience different toxic effects from exposure to dissolved and particulate trace metals. This study investigates how concentration, reaction time and changes to precipitate composition/mineral formation affect copper solubility in seawater, thus influencing metal bioavailability and toxicity in the field and laboratory. A lack of knowledge on the solubility of metals such as copper affects the ability to predict the forms (dissolved and particulate) that organisms are exposed to in field and laboratory waters. Laboratory tests were conducted where copper (total concentrations of 0.5 to 20 mg L−1) was added to natural and artificial seawater (pH 8.15, 22 °C), equilibrated for 28 days and dissolved copper monitored at periodic intervals. At 0.5 mg L−1, dissolved copper concentrations remained stable over 28 days and no precipitates were detected. However, at higher total copper concentrations, an initial rapid precipitation phase was followed by the establishment of a metastable equilibrium that persisted for periods of days to weeks, and whose solubility concentrations and duration were influenced by the total copper concentration and typically in the range 0.6 to 0.9 mg L−1. After 5 to 15 days, a step change decrease in dissolved copper concentration followed by a slow decline was observed in the >2 mg L−1 total copper treatments. The minimum solubility measured after 28 days was 0.053 mg L−1. Elemental and X-ray diffraction analyses indicated that the copper precipitates comprised similar proportions of amorphous copper hydroxycarbonate and amorphous dicopper trihydroxide chloride after 1 day and transformed to predominantly mineralised dicopper trihydroxide chloride in the clinoatacamite polymorph form after 28 days. These observations have particular relevance for toxicity tests of less sensitive organisms and highlight the need to consider metal solubility, exposure to precipitates and changes in precipitate mineral phases.
- 27 November 2020
- Published by CSIRO Publishing in Environmental Chemistry
- Vol. 18 (1) , 1-11
Open AccessGeochemical factors affecting the solubility of copper in seawater
Environmental context: Many trace metals, including copper, are only sparingly soluble in seawater and may exist in both dissolved and particulate forms (e.g. as precipitates). Aquatic organisms may experience different toxic effects from exposure to dissolved and particulate trace metals. This study investigates how concentration, reaction time and changes to precipitate composition/mineral formation affect copper solubility in seawater, thus influencing metal bioavailability and toxicity in the field and laboratory. A lack of knowledge on the solubility of metals such as copper affects the ability to predict the forms (dissolved and particulate) that organisms are exposed to in field and laboratory waters. Laboratory tests were conducted where copper (total concentrations of 0.5 to 20 mg L−1) was added to natural and artificial seawater (pH 8.15, 22 °C), equilibrated for 28 days and dissolved copper monitored at periodic intervals. At 0.5 mg L−1, dissolved copper concentrations remained stable over 28 days and no precipitates were detected. However, at higher total copper concentrations, an initial rapid precipitation phase was followed by the establishment of a metastable equilibrium that persisted for periods of days to weeks, and whose solubility concentrations and duration were influenced by the total copper concentration and typically in the range 0.6 to 0.9 mg L−1. After 5 to 15 days, a step change decrease in dissolved copper concentration followed by a slow decline was observed in the >2 mg L−1 total copper treatments. The minimum solubility measured after 28 days was 0.053 mg L−1. Elemental and X-ray diffraction analyses indicated that the copper precipitates comprised similar proportions of amorphous copper hydroxycarbonate and amorphous dicopper trihydroxide chloride after 1 day and transformed to predominantly mineralised dicopper trihydroxide chloride in the clinoatacamite polymorph form after 28 days. These observations have particular relevance for toxicity tests of less sensitive organisms and highlight the need to consider metal solubility, exposure to precipitates and changes in precipitate mineral phases.
- 7 February 2020
- Published by Elsevier in Ecotoxicology and Environmental Safety
- Vol. 192, 110263
Predicting chronic algal toxicity from 1- to 48-h pulsed exposures to mine site waters using time-averaged concentrations
- 7 February 2020
- Published by Elsevier in Ecotoxicology and Environmental Safety
- Vol. 192, 110263
Predicting chronic algal toxicity from 1- to 48-h pulsed exposures to mine site waters using time-averaged concentrations
- 1 July 2018
- Published by Elsevier in Environmental Pollution
- Vol. 238, 607-616
The use of time-averaged concentrations of metals to predict the toxicity of pulsed complex effluent exposures to a freshwater alga
- 1 July 2018
- Published by Elsevier in Environmental Pollution
- Vol. 238, 607-616
The use of time-averaged concentrations of metals to predict the toxicity of pulsed complex effluent exposures to a freshwater alga
- 1 November 2017
- Published by Elsevier in Environmental Pollution
- Vol. 230, 787-797
Time-averaged concentrations are effective for predicting chronic toxicity of varying copper pulse exposures for two freshwater green algae species
- 1 November 2017
- Published by Elsevier in Environmental Pollution
- Vol. 230, 787-797
Time-averaged concentrations are effective for predicting chronic toxicity of varying copper pulse exposures for two freshwater green algae species
- 1 May 2016
- Published by Elsevier in Aquatic Toxicology
- Vol. 174, 82-91
Toxicity of dissolved and precipitated aluminium to marine diatoms
- 1 May 2016
- Published by Elsevier in Aquatic Toxicology
- Vol. 174, 82-91
Toxicity of dissolved and precipitated aluminium to marine diatoms
- Open Access
- 30 November 2015
- Published by CSIRO Publishing in Environmental Chemistry
- Vol. 13 (3) , 489-495
Lead solubility in seawater: an experimental study
Environmental context: Many trace metals including lead are only sparingly soluble in seawater and may exist in both dissolved and particulate forms (e.g. as precipitates). Aquatic organisms may experience different toxic effects from exposure to dissolved and particulate trace metals. This study reports the limits to lead solubility in seawater that influence the exposure to these forms of lead in the field and the laboratory. A combination of laboratory investigations and thermodynamic modelling were conducted in order to gain an understanding of the factors controlling lead solubility in seawater. In experiments where increasing amounts of lead were added to seawater (in order to avoid supersaturation) and equilibrated for up to 28 days, the maximum solubility was ~2 mg L–1 (pH 8.15, 22 °C). However, at higher added lead concentrations, which caused the rapid formation of lead precipitates, the solution chemistry became dynamic and the observed solubility was markedly lower, varying with both reaction time and precipitate concentration. For instance, when seawater solutions were spiked with 10 mg L–1 of total lead, precipitation occurred immediately and only 1.6 mg L–1 of dissolved lead was measured after 1 h, with this concentration decreasing to 1.3 mg L–1 after 28 days. The solubility of lead in artificial seawater (0.68 mg L–1) was much lower than in natural seawater. This difference was attributed to the significant role played by natural organic matter in complexing dissolved lead. X-Ray diffraction and elemental analysis data suggest that the phase controlling lead solubility is a previously unidentified lead chlorocarbonate, which rapidly transforms to hydrocerussite on washing with deionised water. These observations are of particular relevance to toxicity tests where organisms are exposed to wide ranges of metal concentrations in order to obtain dose–response curves.
- 30 November 2015
- Published by CSIRO Publishing in Environmental Chemistry
- Vol. 13 (3) , 489-495
Open AccessLead solubility in seawater: an experimental study
Environmental context: Many trace metals including lead are only sparingly soluble in seawater and may exist in both dissolved and particulate forms (e.g. as precipitates). Aquatic organisms may experience different toxic effects from exposure to dissolved and particulate trace metals. This study reports the limits to lead solubility in seawater that influence the exposure to these forms of lead in the field and the laboratory. A combination of laboratory investigations and thermodynamic modelling were conducted in order to gain an understanding of the factors controlling lead solubility in seawater. In experiments where increasing amounts of lead were added to seawater (in order to avoid supersaturation) and equilibrated for up to 28 days, the maximum solubility was ~2 mg L–1 (pH 8.15, 22 °C). However, at higher added lead concentrations, which caused the rapid formation of lead precipitates, the solution chemistry became dynamic and the observed solubility was markedly lower, varying with both reaction time and precipitate concentration. For instance, when seawater solutions were spiked with 10 mg L–1 of total lead, precipitation occurred immediately and only 1.6 mg L–1 of dissolved lead was measured after 1 h, with this concentration decreasing to 1.3 mg L–1 after 28 days. The solubility of lead in artificial seawater (0.68 mg L–1) was much lower than in natural seawater. This difference was attributed to the significant role played by natural organic matter in complexing dissolved lead. X-Ray diffraction and elemental analysis data suggest that the phase controlling lead solubility is a previously unidentified lead chlorocarbonate, which rapidly transforms to hydrocerussite on washing with deionised water. These observations are of particular relevance to toxicity tests where organisms are exposed to wide ranges of metal concentrations in order to obtain dose–response curves.
- 1 November 2015
- Published by Elsevier in Aquatic Toxicology
- Vol. 168, 90-97
On the mechanism of nanoparticulate CeO2 toxicity to freshwater algae
- 1 November 2015
- Published by Elsevier in Aquatic Toxicology
- Vol. 168, 90-97
On the mechanism of nanoparticulate CeO2 toxicity to freshwater algae
- 15 September 2015
- Published by CSIRO Publishing in Environmental Chemistry
- Vol. 13 (1) , 111-118
Geochemical controls on aluminium concentrations in coastal waters
Environmental context: Aluminium may be released into coastal waters in dissolved and particulate forms from urban runoff, industrial discharges and acid sulfate soils. Aquatic organisms may experience toxic effects from exposure to dissolved and particulate aluminium. Therefore, the current study reports the geochemical controls such as speciation, precipitation and adsorption that influence the exposure to these aluminium forms in the field and the laboratory. A combination of field and laboratory investigations was conducted in order to gain an understanding of aluminium dynamics in coastal seawater environments. Filterable (<0.025 and 0.025 to <0.45 µm) aluminium species were generally minimal, apart from one field sample collected close to a river mouth where aluminium was associated with iron-containing colloids. In seawater (pH 8.15, 22 °C) spiked with small increments of aluminium so as not to attain supersaturation, the solubility limit was ~500 µg L–1. However, at higher total aluminium concentrations the solution chemistry became highly dynamic. In the presence of aluminium precipitate it was not possible to measure a solubility limit over the 28-day duration of the experiment because the dissolved aluminium concentration varied with both reaction time and precipitate concentration. For instance, when seawater solutions were spiked with 10 000 µg L–1 of total aluminium, a pulse of dissolved aluminium up to 1250 µg L–1 was sustained for several days before decreasing to below 100 µg L–1 after 28 days. The initial precipitate appeared to be solely aluminium hydroxide and transformed over time to contain increasing magnesium, consistent with the formation of hydrotalcite (Mg6Al2CO3(OH)16·4H2O), reaching 21 % of the precipitate mass after 28 days. Adsorption studies showed that at anticipated suspended particulate concentrations for coastal waters, natural particulate material has a fairly low affinity for dissolved aluminium. The results of the current study highlight the complex chemistry of aluminium in marine waters and the role of precipitation reactions.
- 15 September 2015
- Published by CSIRO Publishing in Environmental Chemistry
- Vol. 13 (1) , 111-118
Geochemical controls on aluminium concentrations in coastal waters
Environmental context: Aluminium may be released into coastal waters in dissolved and particulate forms from urban runoff, industrial discharges and acid sulfate soils. Aquatic organisms may experience toxic effects from exposure to dissolved and particulate aluminium. Therefore, the current study reports the geochemical controls such as speciation, precipitation and adsorption that influence the exposure to these aluminium forms in the field and the laboratory. A combination of field and laboratory investigations was conducted in order to gain an understanding of aluminium dynamics in coastal seawater environments. Filterable (<0.025 and 0.025 to <0.45 µm) aluminium species were generally minimal, apart from one field sample collected close to a river mouth where aluminium was associated with iron-containing colloids. In seawater (pH 8.15, 22 °C) spiked with small increments of aluminium so as not to attain supersaturation, the solubility limit was ~500 µg L–1. However, at higher total aluminium concentrations the solution chemistry became highly dynamic. In the presence of aluminium precipitate it was not possible to measure a solubility limit over the 28-day duration of the experiment because the dissolved aluminium concentration varied with both reaction time and precipitate concentration. For instance, when seawater solutions were spiked with 10 000 µg L–1 of total aluminium, a pulse of dissolved aluminium up to 1250 µg L–1 was sustained for several days before decreasing to below 100 µg L–1 after 28 days. The initial precipitate appeared to be solely aluminium hydroxide and transformed over time to contain increasing magnesium, consistent with the formation of hydrotalcite (Mg6Al2CO3(OH)16·4H2O), reaching 21 % of the precipitate mass after 28 days. Adsorption studies showed that at anticipated suspended particulate concentrations for coastal waters, natural particulate material has a fairly low affinity for dissolved aluminium. The results of the current study highlight the complex chemistry of aluminium in marine waters and the role of precipitation reactions.
- 17 February 2015
- Published by Springer Nature in Journal of Nanoparticle Research
- Vol. 17 (2) , 1-19
A comparative study of the physical and chemical properties of nano-sized ZnO particles from multiple batches of three commercial products
- 17 February 2015
- Published by Springer Nature in Journal of Nanoparticle Research
- Vol. 17 (2) , 1-19
A comparative study of the physical and chemical properties of nano-sized ZnO particles from multiple batches of three commercial products