GOGeorgii G. Omel’yAnyuk

Georgii G. Omel’yAnyuk

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Georgii G. Omel’yAnyuk has a total of 52 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Features of Forensic Examination Activities in Cases Involving Violations of Land and Environmental Legislation

    by I. V. Kobrin, M. V. Nikulina, G. G. Omel’Yanyuk, И. В. Кобрин, М. В. Никулина, Г. Г. Омельянюк

    The article considers forensic expert support of legal proceedings in cases involving violations of land and environmental legislation. It is proved that the appointment of complex land surveying and ecological forensic examinations is most effective in this category of cases where the experts of certain specialties conduct their studies in a coordinated manner and strictly within their competence. The interrelation of forensic land surveying and forensic ecological examinations and methodological features of forensic expert proceedings is revealed in cases involving violations of land and environmental legislation.

  • Actual Problems of Rationing Soil Quality: Legal and Methodological Aspects

    by M. A. Vakula, G. G. Omelyanyuk

    Rationing soil quality is an important mechanism for the rational use and protection of soils and lands. The article provides an analysis of the definitions of the terms “soils” and “soil quality” in regulatory legal and regulatory technical acts. The applied significance of using hygienic standards (maximum permissible concentration (MPC) and approximate (tentative) permissible concentration (APC)) as tools for assessing the state of soil and land resources is discussed. Various aspects of soil and land quality standardization are analyzed in detail, including their role in solving the problem of achieving a neutral balance of land degradation. Particular attention is paid to the methodological issues of establishing quality standards using the example of cadmium pollution, the use of MPC/APC indicators in calculating environmental damage, and the use of established quality requirements as target guidelines for the reclamation of disturbed lands. The important role of soil and land quality rationing in environmental monitoring, soil surveys, identifying soil and land pollution, preventing their degradation, and determining the extent of damage caused and the cost of reclamation of disturbed lands is substantiated. Proposals for the development of soil quality standards are advanced. An organization has the right to develop soil quality standards, with subsequent approval by a specially authorized body. It is advisable to prepare regulations for developing the corresponding quality standards with the participation of employees from leading scientific, educational, and industrial institutions with experience in soil and land research and conservation.

  • Practice of Determining the State of Soils and Lands in Court Proceedings

    by G. G. Omelyanyuk, M. A. Vakula

    The results of a study of judicial practices in determining the state of soils and lands are analyzed. In the decision-making process, courts identify and record specific circumstances of non-compliance with environmental requirements by the defendant, as well as the negative consequences of such actions on the state of the soil cover. The analysis shows that, in most cases, courts uphold claims for compensation for damage caused to soils. Compensation for damage caused to soils as a protected object is currently becoming a significant economic tool for addressing environmental issues, both for the prevention of environmental violations and within the framework of environmental and economic regulation. A forensic environmental assessment may be initiated as part of legal proceedings. During the assessment, the environmental status of soils in the disputed area is compared with current standards for soils and lands and/or with environmental indicators in the adjacent territory. This article argues the advantages of using the forensic expert method in court proceedings involving the determination of the condition of soils and lands.

  • Open Access

    Modern System of Scientific and Methodological Materials on Forensic Examination in Forensic Institutions of Russian Ministry of Justice

    by A. I. Usov, G. G. Omel’yAnyuk, E. V. Chesnokova

    The article considers the main problems of scientific and methodological support of forensic activities and suggests ways to solve them using the example of forensic institutions of the Ministry of Justice of Russia. It presents an overview of the definitions of scientific and methodological materials proposed by A.R. Shlyakhov. The need to develop and further improve the system of scientific and methodological materials (SMM) on forensic examination is substantiated with regard to modern conditions. The hierarchy and definitions of the SMM main types are given. It is shown that the processes of the SMM system are based on their preparation and use life cycle which represents itself the interrelated and (or) interacting types of activities, including: development (planning, coordination of scientific and methodological work (SMW), scientific guidance of SMW topics and their implementation control, SMM validation (suitability assessment) and introduction of new SMM into expert practice. Under that the SMM life cycle is five years as a rule. The need for conducting research during 2026–2027 is substantiated with the aim to develop a set of general (specific) expert methods in the following areas: criminalistic expertise, forensic engineering and technical examination; examination of materials, substances and products; socio-humanitarian examination; economic examination; biological examination. This complex will be integrated into the electronic SMM Registry which is being created to support the activities of forensic institutions of the Russian Ministry of Justice. The unified methodological platform built up for all expert specialties in the field of forensic activities will serve as a basis for bringing in progressive mechanisms for active monitoring of the scientific and methodological support level. It will also provide practical prerequisites for the artificial intelligence technologies use in forensic examination.

  • Open Access

    Modern Possibilities of Appointing and Conducting Forensic Religious Examination

    by I. A. Bakushkin, I. A. Lapina, G. G. Omel’yAnyuk

    The article discusses the possibilities of appointing and conducting a forensic religious examination using the example of detection and investigation of crimes under Article 148 of the Criminal Code of the Russian Federation. It gives the analysis of judicial practice of charging with a criminal offense for such wrongdoing. The expediency of appointing and conducting a forensic religious examination or a complex psychological, linguistic and religious expert examination under investigation of crimes related to insulting the believers’ feelings is substantiated. The authors consider it advisable to contact representatives of confessions (clergymen who have completed an additional professional retraining program in this expert specialty) when appointing a forensic religious examination. In this case, the expert’s belonging to a certain religious group will indicate a high level of his special knowledge both theoretical and practical one. It is shown that the development of forensic religious examination on the basis of state forensic institutions, including involvement of representatives of religious denominations, can become a starting point for the development of scientific and methodological support for forensic religious examination.


  • Open Access

    The Role of Digital Transformation in the Development of Forensic Science

    by A. I. Usov, G. G. Omel’yAnyuk, I. A. Lapina, E. S. Karpukhina, V. O. Kuznetsov

    Digital transformation plays a significant role in the implementation of forensic activities due to significant current expansion of the body of evidence based on study of combined computer information received in the course of legal proceedings. The key areas of forensic activity digital transformation are considered. It is shown that the sizes of special knowledge must obligatory cover a competent understanding of modern information technologies, their functionality and development dynamics as well as their effective use feasibility in forensic activities. The combination of systematic and integrated approaches representing various aspects of expert examination makes it possible to fully implement the principles of its objectivity, comprehensiveness and completeness as key principles of forensic activities. The need in setting up and implementation of strategic projects on improving forensic activities in the context of digital transformation determines the evolvement of digital transformation doctrine of forensic science as one of the theories of forensic expertology.


  • Open Access

    Legal Status and Assessment of the Competence of a Forensic Expert and Specialist: Conceptual Framework and Practical Implementation

    by M. V. Zhizhina, G. G. Omel’yAnyuk, I. A. Lapina

    Правовой статус и оценка компетентности судебного эксперта и специалиста: концептуальные основы и практическая реализация

  • Open Access

    On the Essence of Forensic Expert’s Specialized Knowledge and Feasibility of Its Differentiation

    by B. M. Bishmanov, G. G. Omel’yAnyuk

    The article presents an analysis of the terms «knowledgeable persons» and «forensic expert». Based on the historical analysis of the activities of the «knowledgeable persons» figure and the «expert» figure, a logical sequence of concepts has been established: knowledge – science – knowledgeable persons – knowledgeable persons’ specialized knowledge – expert knowledge – forensic expert’s specialized knowledge – specialized knowledge in an expert specialty – a forensic expert. The authors consider the criteria for differentiating forensic expert’s specialized knowledge into: «expert knowledge», «forensic expert knowledge», «specialized knowledge in an expert specialty». They also propose to distinguish «specialized knowledge» as a legal category. In this case, «forensic expert’s specialized knowledge» is seen as expert knowledge as a result of obtaining forensic expert education and experience in conducting forensic examinations within the framework of its specific type, as well as specialized knowledge in an expert specialty (a specific expert specialty is indicated), which should be understood as expert knowledge, skills and abilities acquired during the development of a specific expert specialty and the subsequent acquisition of professional experience in the production of forensic examinations of a specific type. The feasibility of differentiating forensic expert’s specialized knowledge is analyzed, considering the type of forensic examination in which he specializes. A classification of the names of forensic experts is proposed based on differences in the expertise required to produce a certain kind of forensic examinations.


  • Assessing the Reliability of the Forensic Technique for the Identification Study of Motor Gasoline Using Gas-Liquid Chromatography

    by G. I. Bebeshko, G. G. Omel’YAnyuk, O. V. Samoilova, A. I. Usov

    A new approach to solving the problems of forensic examination of petroleum products, fuels, and lubricants associated with establishing whether motor gasoline belongs to a common/different identification variety is proposed. A technique for the identification of gasoline using quantitative results of chromatographic determination of controlled parameters and subsequent evaluation of the results in pairwise compared samples according to the established criteria is developed. The following parameters were selected as controlled parameters: values of research octane number (RON), concentrations of hydrocarbon groups (paraffins, isoparaffins, arenes, naphthenes, olefins) and oxygenates. Their determination was carried out using standardized methods. We used the hardware and software complex of the Chromatec-Crystal 5000 series, including the Chromatec-DHA data processing program. Estimated criteria or decision-making rules regarding the issues posed to an expert were determined to classify gasoline under one product name (generic variety), one production technology (group variety), or a common source of origin (one production batch, storage tank, etc.). The reliability of the method was assessed using a validation procedure consisting of three stages. We used a collection of AI-92 motor gasoline, selected at gas stations of four oil companies during six months of 2022 in various districts of Moscow. At the first stage, the performer analyzed 12 aliquots of each of four gasoline samples (samples that previously belonged to the common volume) at different times. It was established that the quality indicators of the proposed technique (standard deviation of the repeatability and reproducibility, expanded uncertainty, limits of the repeatability and reproducibility) for each of the determined controlled indicators did not exceed the permissible errors established by standardized methods. At the second stage of the experiment, the performer combined 12 test samples into four groups from each manufacturer (one production technology) with three samples of different production times (different batches). By comparing the discrepancies in the measured values of the same controlled indicators between pairs of samples within groups and the discrepancy in average indicators between pairs of groups, the performer establish gasolines manufactured using the same technology; gasolines produced by the same technology, but at different times (different batches); and with a probability of 95%, gasolines having a common source of origin (previously belonging to a common volume). The conclusions of the validation study matched the original data on the samples, which confirmed the correctness of the developed comparison criteria. At the third stage (blind test), the performer examined seven gasoline samples information about the composition and properties of which was not provided to him. The results of the blind test were considered satisfactory. Thus, the results of validation indicate the suitability of the methodology for solving forensic identification problems in relation to motor gasoline and the competence of the performer technique for implementation of the technique.


  • Evaluation of the Reliability of the Qualitative Forensic Technique Microscopic Examination of Textile Fibers

    by G. I. Bebeshko, A. I. Usov, G. G. Omel’YAnyuk, I. P. Lyubetskaya

    Methods of qualitative analysis are widely used in various spheres of public activity, including forensic examination. Making the right decisions based on the results of qualitative analysis necessitates confirmation of the reliability (uncertainty) of the methods which can be provided by the validation procedure. However, the issues related to the validation of qualitative forensic methods are debatable in the absence general regulatory requirements for qualitative analysis methods. We consider a validation procedure of the qualitative forensic technique called microscopic examination of textile fibers, which consists in determining a complex of characteristic external features of natural and chemical textile fibers (color, color features, morphological features) using a microscope, as well as thickness and presence/absence of a matting agent for chemical fibers. These generic characteristics are used to differentiate the fibers under study in the forensic examination of fibrous materials. The reliability of the methodology and the competence of the performers were selected as validation parameters. The parameters were determined numerically by the likelihood ratio and by the values of the rate of false and true results in the total number of tests. Ten samples of natural and chemical textile fibers from the comparative collection of the Laboratory of Forensic Examination of Fibrous Materials of the RFCSE were used for validation. Three experts participating in the experiment independently identified the presence/absence of ten external signs in each of ten samples in the period of a week. Each expert tested a set of one hundred different external features, 39 of which were present in the samples and 61 were absent. When comparing the test results obtained by the expert with the corresponding regulated (known) external features, a conclusion was made about the level of true or false result for each sample. A low (1.7%) level of false results was revealed in relation to the total number of tests, and a low (2.6%) level of false results for each of the experts indicated the reliability of the technique and competence of the experts. The calculation of the likelihood ratio (LR) showed that the probability of true results in the assessment of a set of features is about 60 times (significantly more than one) higher than the probability of false results, which also indicates the reliability of the technique. The results of the validation experiment allowed us to conclude that the method is suitable for use in solving expert problems in the forensic examination of fibrous materials.