Canser Bilir
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Canser Bilir has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Cengiz Güngör
Istanbul Sabahattin Zaim University
1 shared publication - Elif Yafez
Istanbul Sabahattin Zaim Üniversitesi
1 shared publication - Füsun Ülengin
Sabanci Universitesi
1 shared publication - Laurence Douglas Smith
University of Missouri-St. Louis
1 shared publication - Musa Alptekin Erbaş
YL Öğrencisi, İ. Sabahattin Zaim Üniversitesi
1 shared publication Yasin İnce
1 shared publication
Latest Publications
- 14 July 2023
- Published by Bilgi Ekonomisi ve Yonetimi Dergisi in Bilgi Ekonomisi ve Yönetimi Dergisi
- Vol. 18 (1) , 51-69
Proje Yönetimi: Bilim mi yoksa sanat mı?
Proje yönetimi dünyasında önemli tartışmalardan birisi de “Proje Yönetimi”nin bir bilim mi yoksa sanat mı olduğu tartışmasıdır. Proje yönetiminde kullanılan bilimsel araç ve teknikleri daha çok vurgulayan bir grup bilim adamı veya proje yönetimi uygulayıcısı proje yönetiminin daha çok bir bilim olduğunu iddia ederken, diğer bir grup ise proje yönetiminin daha çok yönetsel bilgi ve beceri ile iletişim teknikleri gerektiğini ve dolayısıyla bir sanat olarak ele alınması gerektiğini belirtirler. Kanaatimizce projeden projeye, projeyi uygulayan ekip ve yöneticilerin özelliklerine ve hatta projenin uygulandığı kurum, ortam ve ülkeye bağlı olarak bu sorunun cevabı değişkenlik göstermektedir. Aslında tüm projelerde oranı değişmekle birlikte hem proje yönetiminin bilimsel yönünü hem de sanatsal yönünü aynı anda görmek mümkündür. Bu yazı ile de amacımız bu tartışmaya dahil olup tarafımızı belli etmek, kendi görüşümüzü ortaya koymak değildir. Bu yazının amacı, proje yönetim bilgi alanlarını inceleyerek her bir bilgi alanında kullanılan hem bilimsel araç ve teknikleri gözden geçirmek, bunun yanında da daha çok iletişim becerileri ve liderlik becerileri gerektiren sanatsal yönlerini işin içine katarak proje yönetiminin bir özetini okuyuculara sunmaktır. Böylece bu yazı ile proje yönetimi bilgi alanları sırası ile her bir bilgi alanında dikkat edilebilecek işin yönetim becerilerini de içerecek ve proje başarı şansını artıracak hususlarını hızlıca ele almak hedeflenmiştir.
- 14 July 2023
- Published by Bilgi Ekonomisi ve Yonetimi Dergisi in Bilgi Ekonomisi ve Yönetimi Dergisi
- Vol. 18 (1) , 51-69
Proje Yönetimi: Bilim mi yoksa sanat mı?
Proje yönetimi dünyasında önemli tartışmalardan birisi de “Proje Yönetimi”nin bir bilim mi yoksa sanat mı olduğu tartışmasıdır. Proje yönetiminde kullanılan bilimsel araç ve teknikleri daha çok vurgulayan bir grup bilim adamı veya proje yönetimi uygulayıcısı proje yönetiminin daha çok bir bilim olduğunu iddia ederken, diğer bir grup ise proje yönetiminin daha çok yönetsel bilgi ve beceri ile iletişim teknikleri gerektiğini ve dolayısıyla bir sanat olarak ele alınması gerektiğini belirtirler. Kanaatimizce projeden projeye, projeyi uygulayan ekip ve yöneticilerin özelliklerine ve hatta projenin uygulandığı kurum, ortam ve ülkeye bağlı olarak bu sorunun cevabı değişkenlik göstermektedir. Aslında tüm projelerde oranı değişmekle birlikte hem proje yönetiminin bilimsel yönünü hem de sanatsal yönünü aynı anda görmek mümkündür. Bu yazı ile de amacımız bu tartışmaya dahil olup tarafımızı belli etmek, kendi görüşümüzü ortaya koymak değildir. Bu yazının amacı, proje yönetim bilgi alanlarını inceleyerek her bir bilgi alanında kullanılan hem bilimsel araç ve teknikleri gözden geçirmek, bunun yanında da daha çok iletişim becerileri ve liderlik becerileri gerektiren sanatsal yönlerini işin içine katarak proje yönetiminin bir özetini okuyuculara sunmaktır. Böylece bu yazı ile proje yönetimi bilgi alanları sırası ile her bir bilgi alanında dikkat edilebilecek işin yönetim becerilerini de içerecek ve proje başarı şansını artıracak hususlarını hızlıca ele almak hedeflenmiştir.
- Open Access
- 12 May 2023
- Published by Wiley in International Transactions in Operational Research
- Vol. 32 (1) , 438-477
Effect of demand uncertainty on omnichannel distribution network design strategies
To investigate the effect of uncertain demand on various omnichannel distribution network strategies and analyze the impacts of various online order fulfillment policies, a two‐staged network optimization model is built. The two stages are a deterministic model to define the optimal distribution network and a simulation model to determine the optimal network flow to maximize the total profit for a given distribution network and online order fulfillment policy. This study shows the importance of taking demand uncertainty, requested delivery time, and customer service level (CSL) into account in designing an omnichannel distribution network. The results of the simulation model indicate that shipments from warehouse (SFW) and hybrid strategies more successfully cope with variation because there is a greater profit decline in shipments from store (SFS) strategies. The results also show that applying a dynamic assignment policy plays an important role in handling variation in demand. The study shows that, as demand uncertainty and CSL increase, having products available in central repositories becomes even more important to cope with demand variation. The study also indicates SFS strategies that seem more profitable in the assumed‐to‐be deterministic model might be misleading because SFS strategies become less profitable (compared to SFW strategies) when demand uncertainty is taken into account.
- 12 May 2023
- Published by Wiley in International Transactions in Operational Research
- Vol. 32 (1) , 438-477
Open AccessEffect of demand uncertainty on omnichannel distribution network design strategies
To investigate the effect of uncertain demand on various omnichannel distribution network strategies and analyze the impacts of various online order fulfillment policies, a two‐staged network optimization model is built. The two stages are a deterministic model to define the optimal distribution network and a simulation model to determine the optimal network flow to maximize the total profit for a given distribution network and online order fulfillment policy. This study shows the importance of taking demand uncertainty, requested delivery time, and customer service level (CSL) into account in designing an omnichannel distribution network. The results of the simulation model indicate that shipments from warehouse (SFW) and hybrid strategies more successfully cope with variation because there is a greater profit decline in shipments from store (SFS) strategies. The results also show that applying a dynamic assignment policy plays an important role in handling variation in demand. The study shows that, as demand uncertainty and CSL increase, having products available in central repositories becomes even more important to cope with demand variation. The study also indicates SFS strategies that seem more profitable in the assumed‐to‐be deterministic model might be misleading because SFS strategies become less profitable (compared to SFW strategies) when demand uncertainty is taken into account.
- 13 April 2022
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2676 (6) , 640-658
Study of the Potential Effects of Gate-Hold Strategies on Arrival and Departure Operations at Charlotte Douglas International Airport
We employed discrete-event simulation with embedded multivariate statistical models for time and situation-dependent parameters to study the potential impact of regulating the release of planes from their terminal gates in peak periods to reduce congestion on ramps and taxiways at Charlotte Douglas International Airport, a major U.S. hub for of the world’s largest airline, American Airlines. Gate-holding strategies are one of several operational strategies to reduce aviation’s carbon footprint. They have been shown to reduce fuel consumption, air pollution, and greenhouse gas emissions, but past studies have concentrated on taxi times and fuel consumption of outbound aircraft without considering the potential disruptions on inbound traffic, which may be blocked from reaching their intended gates. We verified that reductions in outbound taxi times could be achieved without delaying the times when planes lifted off for departure but, depending on the gate-hold rules employed and the intensity of flight operations, more delays and gate changes occurred for arriving aircraft. Our models allow intensive examination of the tradeoffs involved in improving system performance with various strategies.
- 13 April 2022
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2676 (6) , 640-658
Study of the Potential Effects of Gate-Hold Strategies on Arrival and Departure Operations at Charlotte Douglas International Airport
We employed discrete-event simulation with embedded multivariate statistical models for time and situation-dependent parameters to study the potential impact of regulating the release of planes from their terminal gates in peak periods to reduce congestion on ramps and taxiways at Charlotte Douglas International Airport, a major U.S. hub for of the world’s largest airline, American Airlines. Gate-holding strategies are one of several operational strategies to reduce aviation’s carbon footprint. They have been shown to reduce fuel consumption, air pollution, and greenhouse gas emissions, but past studies have concentrated on taxi times and fuel consumption of outbound aircraft without considering the potential disruptions on inbound traffic, which may be blocked from reaching their intended gates. We verified that reductions in outbound taxi times could be achieved without delaying the times when planes lifted off for departure but, depending on the gate-hold rules employed and the intensity of flight operations, more delays and gate changes occurred for arriving aircraft. Our models allow intensive examination of the tradeoffs involved in improving system performance with various strategies.
- Open Access
- 31 October 2021
- Published by University of Minho in International Journal of Information Systems and Project Management
- Vol. 9 (4) , 24.40
Project success/failure rates in Turkey
In this study, the success rate of projects in Turkey is measured, and the significant factors behind the successes and the failures of those projects are ranked. To the best of our knowledge, this is the first study widely measuring the success rate of projects in Turkey. The applied methodology is adapted from the Chaos Report by Standish Group. The data for 320 projects with a total budget of approximately $640 million (around 3.6 billion Turkish lira) is collected for the analysis. The results showed that 48% of projects are completed successfully while 45% are eventually completed but either over budget, not on time, or not fully completed. The success rate of the reviewed projects is higher than the rate reported in the Chaos Report. However, the success rate of projects drops to 44% when only technology-driven projects are considered. As the project size increases, the success rate diminishes, as demonstrated in the Chaos Report. The study on the significant factors influencing the success or failure of the projects revealed that the most critical factors are the “requirement definitions”, “requirement planning” and “top management support”.
- 31 October 2021
- Published by University of Minho in International Journal of Information Systems and Project Management
- Vol. 9 (4) , 24.40
Open AccessProject success/failure rates in Turkey
In this study, the success rate of projects in Turkey is measured, and the significant factors behind the successes and the failures of those projects are ranked. To the best of our knowledge, this is the first study widely measuring the success rate of projects in Turkey. The applied methodology is adapted from the Chaos Report by Standish Group. The data for 320 projects with a total budget of approximately $640 million (around 3.6 billion Turkish lira) is collected for the analysis. The results showed that 48% of projects are completed successfully while 45% are eventually completed but either over budget, not on time, or not fully completed. The success rate of the reviewed projects is higher than the rate reported in the Chaos Report. However, the success rate of projects drops to 44% when only technology-driven projects are considered. As the project size increases, the success rate diminishes, as demonstrated in the Chaos Report. The study on the significant factors influencing the success or failure of the projects revealed that the most critical factors are the “requirement definitions”, “requirement planning” and “top management support”.
- Open Access
- 24 October 2020
- Published by Hindawi Limited in Advances in Operations Research
- Vol. 2020, 1-14
Operations Research/Management Science Research in Europe: A Bibliometric Overview
This paper provides a bibliometric analysis of the articles in the field of operations research or management science (OR/MS) published in the years 19802018 by European researchers. The analysiss objective is to identify and examine the current state of OR/MS studies in Europe, which publishes about 38 of the papers published worldwide. The analysis was based on the data from the Web of Science (WoS) databases. We found a total of 65,352 papers in 148 different journals in the OR/MS field. The results provide a general picture of the studies, which are classified according to the most influential authors, institutions, papers, and journals. The study revealed that the ratio of OR/MS studies having at least one European author has steadily increased over the decades from 28.27 in the 1980s to 41.29 in the 2010s. The analysis also provides citation statistics of the European OR/MS articles. The study concluded that the impact of European publications is less than the impact of U.S. publications. The bibliometric analysis of the studies showed that only a small portion of the countries/regions, institutions, and even authors published a substantial portion of the papers, as indicated by the Pareto rule. The research trends have been identified through an analysis of keyword usage over the years. In keyword analysis, which subcategories are studied together is also identified. In the paper, collaboration among countries and institutions is also identified and depicted by using VOS viewer.
- 24 October 2020
- Published by Hindawi Limited in Advances in Operations Research
- Vol. 2020, 1-14
Open AccessOperations Research/Management Science Research in Europe: A Bibliometric Overview
This paper provides a bibliometric analysis of the articles in the field of operations research or management science (OR/MS) published in the years 19802018 by European researchers. The analysiss objective is to identify and examine the current state of OR/MS studies in Europe, which publishes about 38 of the papers published worldwide. The analysis was based on the data from the Web of Science (WoS) databases. We found a total of 65,352 papers in 148 different journals in the OR/MS field. The results provide a general picture of the studies, which are classified according to the most influential authors, institutions, papers, and journals. The study revealed that the ratio of OR/MS studies having at least one European author has steadily increased over the decades from 28.27 in the 1980s to 41.29 in the 2010s. The analysis also provides citation statistics of the European OR/MS articles. The study concluded that the impact of European publications is less than the impact of U.S. publications. The bibliometric analysis of the studies showed that only a small portion of the countries/regions, institutions, and even authors published a substantial portion of the papers, as indicated by the Pareto rule. The research trends have been identified through an analysis of keyword usage over the years. In keyword analysis, which subcategories are studied together is also identified. In the paper, collaboration among countries and institutions is also identified and depicted by using VOS viewer.
- Open Access
- 26 September 2019
- Published by Hacettepe University in Hacettepe Üniversitesi İktisadi ve İdari Bilimler Fakültesi Dergisi
- Vol. 37 (3) , 391-422
KURUMSAL PROJE YÖNETİMİ OLGUNLUK MODELİ VE YEREL YÖNETİMLER UYGULAMASI
Yine elde edilen önemli sonuçlardan bir tanesi de, yerel yönetimlerin proje yönetim olgunluk seviyelerinin birbirleri arasında çok fazla değişmediği gerçeğidir. Bu anlamda, büyükşehir belediyesi olgunluk seviyesi ilçe belediyelerine göre olumlu olarak ayrışmaktadır. Yine bazı yerel belediyelerimizin diğerlerine oranla bazı bilgi alanlarına kısmen daha yüksek skorlar elde ettikleri de görülmüştür. Burada da temel sebeplerin, bu ilçe yönetimlerinde stratejik planlama ve yönetim fonksiyonlarının daha olgun bir şekilde gerçekleştiriliyor olması ve kalite güvence ile iç kontrol süreçlerinin diğerlerine oranla daha etkili işletiliyor olması olduğu tespit edilmiştir. Proje yönetimi, bir ürün veya sonucu ortaya çıkarmak adına insan kaynakları, zaman ve maliyet gibi etkenlerin birbiriyle uyumlu ve aynı zamanda verimli olarak kullanılmasını sağlamayı hedeflemektedir. Özellikle ellerindeki sınırlı kaynaklarla üst düzeyde hizmet vermeye çalışan yerel yönetimler proje yönetimi kavramının önemini gün geçtikçe daha iyi kavramaya başlamışlardır. Bu doğrultuda PMI gibi kaynaklarca tanımlanmış olan Proje Yönetimi Olgunluk Modellerinden faydalanmaları, yerel yönetimlerin, proje yönetiminde bulundukları yeri tespit etmeleri ve kendilerini bu konuda nasıl geliştirmeleri gerektiğini göstermesi açısından özel bir öneme sahiptir. Yapılan çalışmada elde edilen sonuçlar göstermiştir ki, yerel yönetimlerimiz proje yönetiminin kapsam yönetimi ve tedarik yönetimi bilgi alanlarında kamu ihale kanununa uygunluk esas alındığı için diğer bilgi alanlarına göre daha yüksek olgunluk seviyesine sahiptir. Bunu takip eden maliyet, zaman, kalite, iletişim yönetimi ikinci seviye civarında seyretmektedir. Bir diğer yandan, risk yönetimi ve insan kaynakları yönetimi de diğer bilgi alanlarına kıyasla daha düşük seviyede, yani henüz birinci seviyede çıkmıştır.
- 26 September 2019
- Published by Hacettepe University in Hacettepe Üniversitesi İktisadi ve İdari Bilimler Fakültesi Dergisi
- Vol. 37 (3) , 391-422
Open AccessKURUMSAL PROJE YÖNETİMİ OLGUNLUK MODELİ VE YEREL YÖNETİMLER UYGULAMASI
Yine elde edilen önemli sonuçlardan bir tanesi de, yerel yönetimlerin proje yönetim olgunluk seviyelerinin birbirleri arasında çok fazla değişmediği gerçeğidir. Bu anlamda, büyükşehir belediyesi olgunluk seviyesi ilçe belediyelerine göre olumlu olarak ayrışmaktadır. Yine bazı yerel belediyelerimizin diğerlerine oranla bazı bilgi alanlarına kısmen daha yüksek skorlar elde ettikleri de görülmüştür. Burada da temel sebeplerin, bu ilçe yönetimlerinde stratejik planlama ve yönetim fonksiyonlarının daha olgun bir şekilde gerçekleştiriliyor olması ve kalite güvence ile iç kontrol süreçlerinin diğerlerine oranla daha etkili işletiliyor olması olduğu tespit edilmiştir. Proje yönetimi, bir ürün veya sonucu ortaya çıkarmak adına insan kaynakları, zaman ve maliyet gibi etkenlerin birbiriyle uyumlu ve aynı zamanda verimli olarak kullanılmasını sağlamayı hedeflemektedir. Özellikle ellerindeki sınırlı kaynaklarla üst düzeyde hizmet vermeye çalışan yerel yönetimler proje yönetimi kavramının önemini gün geçtikçe daha iyi kavramaya başlamışlardır. Bu doğrultuda PMI gibi kaynaklarca tanımlanmış olan Proje Yönetimi Olgunluk Modellerinden faydalanmaları, yerel yönetimlerin, proje yönetiminde bulundukları yeri tespit etmeleri ve kendilerini bu konuda nasıl geliştirmeleri gerektiğini göstermesi açısından özel bir öneme sahiptir. Yapılan çalışmada elde edilen sonuçlar göstermiştir ki, yerel yönetimlerimiz proje yönetiminin kapsam yönetimi ve tedarik yönetimi bilgi alanlarında kamu ihale kanununa uygunluk esas alındığı için diğer bilgi alanlarına göre daha yüksek olgunluk seviyesine sahiptir. Bunu takip eden maliyet, zaman, kalite, iletişim yönetimi ikinci seviye civarında seyretmektedir. Bir diğer yandan, risk yönetimi ve insan kaynakları yönetimi de diğer bilgi alanlarına kıyasla daha düşük seviyede, yani henüz birinci seviyede çıkmıştır.
- Open Access
- 26 June 2019
- Published by ACC Publishing in Business & Management Studies: An International Journal
- Vol. 7 (2) , 814-836
BİR BAKIM ONARIM ORGANİZASYONUNDA ENTEGRE STOK YÖNETİMİ VE BAKIM PLANLAMASI – HAVAYOLU FİRMASI UYGULAMASI
Sağlıklı yürüyen bir bakım organizasyonunda parçaların ihtiyaç halinde elde bulundurulma oranının yüksek olması beklenir. Bununla birlikte malzeme stok seviyelerinin de gereksiz maliyetlere sebep olacak seviyede yüksek olmaması gerekir. Tüm malzemeleri yakından takip etmeye çalışmak karmaşıklık ve zorluklara yol açabilir. Bu yüzden önemli ve görece önemsiz kalemler ABC analizi yardımı sınıflandırılarak yönetilmelidir. Bu çalışmada bir havayolu firmasının bakım organizasyonu ele alınmıştır. Firmanın son iki yılına ait verilerden yararlanılarak bakım operasyonunda kullanılan malzemelere ABC ve XYZ sınıflandırması yapılmıştır. A sınıfına giren malzemeler daha detaylı incelenerek sonraki yıllardaki bakım planları ile entegre edilmiştir. Bu şekilde yeniden sipariş miktarları ve dolayısıyla envanter düzeyleri optimize edilmiştir. Sonuçlar göstermiştir ki, firmanın zaten yıllık olarak planlanan bakım çalışmalarını ve bu çalışmalarda var olan parça değişim oranlarını baz alarak envanter yeniden sipariş miktarlarının belirlenmesi, firmanın acil sipariş verme gereksinimini azaltırken envanter düzeylerinde de ciddi azalmalar sağlayabilmektedir. Yapılan çalışma, bildiğimiz kadarı ile entegre bakım organizasyonu ve stok yönetiminin ABC analizi yardımı ile havayolu firmasına uygulandığı ilk çalışma olma özelliğini de taşımaktadır.
- 26 June 2019
- Published by ACC Publishing in Business & Management Studies: An International Journal
- Vol. 7 (2) , 814-836
Open AccessBİR BAKIM ONARIM ORGANİZASYONUNDA ENTEGRE STOK YÖNETİMİ VE BAKIM PLANLAMASI – HAVAYOLU FİRMASI UYGULAMASI
Sağlıklı yürüyen bir bakım organizasyonunda parçaların ihtiyaç halinde elde bulundurulma oranının yüksek olması beklenir. Bununla birlikte malzeme stok seviyelerinin de gereksiz maliyetlere sebep olacak seviyede yüksek olmaması gerekir. Tüm malzemeleri yakından takip etmeye çalışmak karmaşıklık ve zorluklara yol açabilir. Bu yüzden önemli ve görece önemsiz kalemler ABC analizi yardımı sınıflandırılarak yönetilmelidir. Bu çalışmada bir havayolu firmasının bakım organizasyonu ele alınmıştır. Firmanın son iki yılına ait verilerden yararlanılarak bakım operasyonunda kullanılan malzemelere ABC ve XYZ sınıflandırması yapılmıştır. A sınıfına giren malzemeler daha detaylı incelenerek sonraki yıllardaki bakım planları ile entegre edilmiştir. Bu şekilde yeniden sipariş miktarları ve dolayısıyla envanter düzeyleri optimize edilmiştir. Sonuçlar göstermiştir ki, firmanın zaten yıllık olarak planlanan bakım çalışmalarını ve bu çalışmalarda var olan parça değişim oranlarını baz alarak envanter yeniden sipariş miktarlarının belirlenmesi, firmanın acil sipariş verme gereksinimini azaltırken envanter düzeylerinde de ciddi azalmalar sağlayabilmektedir. Yapılan çalışma, bildiğimiz kadarı ile entegre bakım organizasyonu ve stok yönetiminin ABC analizi yardımı ile havayolu firmasına uygulandığı ilk çalışma olma özelliğini de taşımaktadır.
- Open Access
- 25 April 2018
- Published by ACC Publishing in Business & Management Studies: An International Journal
- Vol. 6 (1)
OPTIMIZATION OF ATM AND BRANCH CASH OPERATIONS USING AN INTEGRATED CASH REQUIREMENT FORECASTING AND CASH OPTIMIZATION MODEL
In this study, an integrated cash requirement forecasting and cash inventory optimization model is implemented in both the branch and automated teller machine (ATM) networks of a mid-sized bank in Turkey to optimize the bank’s cash supply chain. The implemented model’s objective is to minimize the idle cash levels at both branches and ATMs without decreasing the customer service level (CSL) by providing the correct amount of cash at the correct location and time. To the best of our knowledge, the model is the first integrated model in the literature to be applied to both ATMs and branches simultaneously. The results demonstrated that the integrated model dramatically decreased the idle cash levels at both branches and ATMs without degrading the availability of cash and hence customer satisfaction. An in-depth analysis of the results also indicated that the results were more remarkable for branches. The results also demonstrated that the utilization of various seasonal indices plays a very critical role in the forecasting of cash requirements for a bank. Another unique feature of the study is that the model is the first to include the recycling feature of ATMs. The results demonstrated that as a result of the inclusion of the deliberate seasonal indices in the forecasting model, the integrated cash optimization models can be used to estimate the cash requirements of recycling ATMs.
- 25 April 2018
- Published by ACC Publishing in Business & Management Studies: An International Journal
- Vol. 6 (1)
Open AccessOPTIMIZATION OF ATM AND BRANCH CASH OPERATIONS USING AN INTEGRATED CASH REQUIREMENT FORECASTING AND CASH OPTIMIZATION MODEL
In this study, an integrated cash requirement forecasting and cash inventory optimization model is implemented in both the branch and automated teller machine (ATM) networks of a mid-sized bank in Turkey to optimize the bank’s cash supply chain. The implemented model’s objective is to minimize the idle cash levels at both branches and ATMs without decreasing the customer service level (CSL) by providing the correct amount of cash at the correct location and time. To the best of our knowledge, the model is the first integrated model in the literature to be applied to both ATMs and branches simultaneously. The results demonstrated that the integrated model dramatically decreased the idle cash levels at both branches and ATMs without degrading the availability of cash and hence customer satisfaction. An in-depth analysis of the results also indicated that the results were more remarkable for branches. The results also demonstrated that the utilization of various seasonal indices plays a very critical role in the forecasting of cash requirements for a bank. Another unique feature of the study is that the model is the first to include the recycling feature of ATMs. The results demonstrated that as a result of the inclusion of the deliberate seasonal indices in the forecasting model, the integrated cash optimization models can be used to estimate the cash requirements of recycling ATMs.
- 1 June 2017
- Published by Elsevier in Computers & Industrial Engineering
- Vol. 108, 136-148
An integrated multi-objective supply chain network and competitive facility location model
- 1 June 2017
- Published by Elsevier in Computers & Industrial Engineering
- Vol. 108, 136-148
An integrated multi-objective supply chain network and competitive facility location model