Pol Ribes-Pleguezuelo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Pol Ribes-Pleguezuelo has a total of 63 co-authors. Here are the top co-authors by number of shared publications:
- Andreas Tünnermann
Institute of Applied Physics, Abbe Center of Photonics, Friedrich Schiller University Jena, Albert-Einstein-Str. 15, 07745 Jena, Germany
5 shared publications Ramona Eberhardt
Fraunhofer Institute for Applied Optics and Precision Engineering IOF, Jena
5 shared publications- Erik Beckert
Fraunhofer Institute for Applied Optics and Precision Engineering IOF, Albert-Einstein-Str. 7, 07745 Jena, Germany
4 shared publications Marcel Hornaff
Fraunhofer Institute for Applied Optics and Precision Engineering IOF, Albert-Einstein-Str. 7, 07745 Jena and Germany, --- Select a Country --
3 shared publicationsA. Tünnermann
Fraunhofer Institute for Applied Optics and Precision Engineering IOF
2 shared publications- Denis Guilhot
WorldSensing, Barcelona, Spain
2 shared publications
Latest Publications
- Open Access
- 9 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1) , 3401
Author Correction: Requirements for next-generation integrated photonic FMCW LiDAR sources
- 9 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1) , 3401
Open AccessAuthor Correction: Requirements for next-generation integrated photonic FMCW LiDAR sources
- Top Cited PapersOpen Access
- 22 July 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-6
Requirements for next-generation integrated photonic FMCW LiDAR sources
We introduce a framework for the design of photonic integrated laser sources for FMCW LiDAR, evaluating trade-offs in key laser metrics such as linewidth, chirp linearity and rate, based on laser-system co-design metrics. We review the main performance requirements for mid-range applications, with the goal of guiding ongoing research and commercial development.
- 22 July 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-6
Top Cited PapersOpen AccessRequirements for next-generation integrated photonic FMCW LiDAR sources
We introduce a framework for the design of photonic integrated laser sources for FMCW LiDAR, evaluating trade-offs in key laser metrics such as linewidth, chirp linearity and rate, based on laser-system co-design metrics. We review the main performance requirements for mid-range applications, with the goal of guiding ongoing research and commercial development.
- 28 April 2024
- Published by Springer Nature
- p. 131-138
The ESA HERA Mission and Its Planetary Altimeter—Learning to Deflect Asteroids
- 28 April 2024
- Published by Springer Nature
- p. 131-138
The ESA HERA Mission and Its Planetary Altimeter—Learning to Deflect Asteroids
- 1 March 2022
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Spacecraft and Rockets
- Vol. 59 (2) , 375-388
Toward the Autonomous Assembly of Large Telescopes Using CubeSat Rendezvous and Docking
This paper describes the results of a system study for the in-space assembly of large optical telescopes using a building block approach involving multiple mirror segments. Such an approach is enab...
- 1 March 2022
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Spacecraft and Rockets
- Vol. 59 (2) , 375-388
Toward the Autonomous Assembly of Large Telescopes Using CubeSat Rendezvous and Docking
This paper describes the results of a system study for the in-space assembly of large optical telescopes using a building block approach involving multiple mirror segments. Such an approach is enab...
- Open Access
Exploring the Habitability of Venus: Conceptual Design of a Small Atmospheric Probe
The possible presence of life in the atmosphere of Venus has been debated frequently over the last 60 years. The discussion was recently reignited by the possible detection of phosphine (PH), but several other chemicals potentially relevant for life processes are also found in the middle atmosphere. Moreover, the reasons for the heterogeneous ultraviolet (UV) absorption between 320 and 400 nm in the altitude range ∼40–70 km are still not well understood. These aspects could be further studied in-situ by UV Raman and fluorescence instruments. Here, the conceptual design of a small balloon probe (<20 kg) is presented, including a science payload comprising a UV laser, spectrometer, and a telescope. The goal of the proposed mission is to analyse the absorption of UV light in Venus’ atmosphere, to study the atmospheric composition, and to verify the possible presence of biomarkers. Current state-of-the-art technologies would allow a more cost-efficient and easy to develop mission, as compared to previous Venus probes. This article is focused on the scientific instrumentation, as well as on the mass and power budgets required to realise the proposed mission.Open AccessExploring the Habitability of Venus: Conceptual Design of a Small Atmospheric Probe
The possible presence of life in the atmosphere of Venus has been debated frequently over the last 60 years. The discussion was recently reignited by the possible detection of phosphine (PH), but several other chemicals potentially relevant for life processes are also found in the middle atmosphere. Moreover, the reasons for the heterogeneous ultraviolet (UV) absorption between 320 and 400 nm in the altitude range ∼40–70 km are still not well understood. These aspects could be further studied in-situ by UV Raman and fluorescence instruments. Here, the conceptual design of a small balloon probe (<20 kg) is presented, including a science payload comprising a UV laser, spectrometer, and a telescope. The goal of the proposed mission is to analyse the absorption of UV light in Venus’ atmosphere, to study the atmospheric composition, and to verify the possible presence of biomarkers. Current state-of-the-art technologies would allow a more cost-efficient and easy to develop mission, as compared to previous Venus probes. This article is focused on the scientific instrumentation, as well as on the mass and power budgets required to realise the proposed mission. - Open Access
- 11 September 2019
- Published by MDPI AG in Instruments
- Vol. 3 (3) , 50
Laser Technology in Photonic Applications for Space
The registered history of laser technologies for space application starts with the first laser echoes reflected off the Moon in 1962. Since then, photonic technologies have become very prominent in most technical development. Their presence has also dramatically increased in space applications thanks to the many advantages they present over traditional equivalent devices, such as the immunity against electromagnetic interference, as well as their efficiency and low power consumption. Lasers are one of the key components in most of those applications. In this review, we present an overview of the main technologies involving lasers that are currently deployed in space, before reviewing the requirements for lasers to be reliable in that environment before discussing the advantages and drawbacks of replacing standard technologies by newly developed photonic laser-based devices.
- 11 September 2019
- Published by MDPI AG in Instruments
- Vol. 3 (3) , 50
Open AccessLaser Technology in Photonic Applications for Space
The registered history of laser technologies for space application starts with the first laser echoes reflected off the Moon in 1962. Since then, photonic technologies have become very prominent in most technical development. Their presence has also dramatically increased in space applications thanks to the many advantages they present over traditional equivalent devices, such as the immunity against electromagnetic interference, as well as their efficiency and low power consumption. Lasers are one of the key components in most of those applications. In this review, we present an overview of the main technologies involving lasers that are currently deployed in space, before reviewing the requirements for lasers to be reliable in that environment before discussing the advantages and drawbacks of replacing standard technologies by newly developed photonic laser-based devices.
- Open Access
- 13 June 2019
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 58 (06) , 065101-7
Assembly process and optical performances for a golden laser spark-plug device
Concern about the environment, which is degraded by hydrocarbon pollution and greenhouse gas emissions resulting from the ongoing use of internal combustion engines, requires the development of alternative techniques to power engines, or the investigation of methods that can improve the performances of current engines. It is obvious that the proven advantages of vehicles powered by electrical engines will trigger further developments in this field. On the other hand, it is also largely accepted that combustion will, for many years, remain the dominant conversion process providing energy for society. Therefore, improved ignition methods, such as high energy spark-plug ignition (capacitive discharge, continuous discharge, or high-frequency multicharge ignition), pulse-power ignition (repetitive pulse spark or transient plasma ignition), radio-frequency ignition (spark, corona or microwave plasma ignition), or laser ignition (LI) are being investigated in order to initiate faster, more robust, and more efficient combustion.
- 13 June 2019
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 58 (06) , 065101-7
Open AccessAssembly process and optical performances for a golden laser spark-plug device
Concern about the environment, which is degraded by hydrocarbon pollution and greenhouse gas emissions resulting from the ongoing use of internal combustion engines, requires the development of alternative techniques to power engines, or the investigation of methods that can improve the performances of current engines. It is obvious that the proven advantages of vehicles powered by electrical engines will trigger further developments in this field. On the other hand, it is also largely accepted that combustion will, for many years, remain the dominant conversion process providing energy for society. Therefore, improved ignition methods, such as high energy spark-plug ignition (capacitive discharge, continuous discharge, or high-frequency multicharge ignition), pulse-power ignition (repetitive pulse spark or transient plasma ignition), radio-frequency ignition (spark, corona or microwave plasma ignition), or laser ignition (LI) are being investigated in order to initiate faster, more robust, and more efficient combustion.
- Open Access
- 19 April 2019
- Published by MDPI AG in Instruments
- Vol. 3 (2) , 25
Insights of the Qualified ExoMars Laser and Mechanical Considerations of Its Assembly Process
1960 is the birth year of both the laser and the Mars exploration missions. Eleven years passed before the first successful landing on Mars, and another six before the first rover could explore the planet’s surface. In 2011, both technologies were reunited with the first laser landing on Mars as part of the ChemCam instrument, integrated inside the Curiosity Rover. In 2020, two more rovers with integrated lasers are expected to land on Mars: one through the National Aeronautics and Space Administration (NASA) Mars 2020 mission and another through the European Space Agency (ESA) ExoMars mission. The ExoMars mission laser is one of the components of the Raman Spectrometer instrument, which the Aerospace Technology National Institute of Spain (INTA) is responsible for. It uses as its excitation source a laser designed by Monocrom and manufactured in collaboration with the Fraunhofer Institute for Applied Optics and Precision Engineering (IOF). In this paper, we present for the first time the final flight module laser that has been installed in the rover’s onboard laboratory and validated to be shipped to Mars in 2020. Particular emphasis is given to mechanical considerations and assembly procedures, as the ExoMars laser assembly has required soldering techniques in contrast to the standard adhesive technologies used for most laser assembly processes in order to fulfill the environmental and optical requirements of the mission.
- 19 April 2019
- Published by MDPI AG in Instruments
- Vol. 3 (2) , 25
Open AccessInsights of the Qualified ExoMars Laser and Mechanical Considerations of Its Assembly Process
1960 is the birth year of both the laser and the Mars exploration missions. Eleven years passed before the first successful landing on Mars, and another six before the first rover could explore the planet’s surface. In 2011, both technologies were reunited with the first laser landing on Mars as part of the ChemCam instrument, integrated inside the Curiosity Rover. In 2020, two more rovers with integrated lasers are expected to land on Mars: one through the National Aeronautics and Space Administration (NASA) Mars 2020 mission and another through the European Space Agency (ESA) ExoMars mission. The ExoMars mission laser is one of the components of the Raman Spectrometer instrument, which the Aerospace Technology National Institute of Spain (INTA) is responsible for. It uses as its excitation source a laser designed by Monocrom and manufactured in collaboration with the Fraunhofer Institute for Applied Optics and Precision Engineering (IOF). In this paper, we present for the first time the final flight module laser that has been installed in the rover’s onboard laboratory and validated to be shipped to Mars in 2020. Particular emphasis is given to mechanical considerations and assembly procedures, as the ExoMars laser assembly has required soldering techniques in contrast to the standard adhesive technologies used for most laser assembly processes in order to fulfill the environmental and optical requirements of the mission.
- Open Access
- 1 January 2019
- Published by INSTICC
- p. 85-93
Soldering and Packaging Study for an Optical Filter Required for High Resolution Earth Observation Space Missions
- 1 January 2019
- Published by INSTICC
- p. 85-93
Open AccessSoldering and Packaging Study for an Optical Filter Required for High Resolution Earth Observation Space Missions
- Open Access
- 6 November 2017
- Published by EDP Sciences in Journal of the European Optical Society-Rapid Publications
- Vol. 13 (1) , 34
Solderjet bumping packaging technique optimization for the miniaturization of laser devices
Background Low-stress soldering techniques can guarantee a minimized input of thermal energy allowing for the design and later assembly of more robust and miniaturized optical devices. However, in order to build miniaturized optical devices, these small-induced stresses produced by soldering techniques have to be investigated to guarantee that the stress-induced birefringence effects do not alter the device optical properties and requirements. Methods An analytical method that relates the stress-induced birefringence of laser components with their corresponding lasing capabilities has been compared to the real induced-stress results created in components packaged using solderjet technology. The main goal was to optimize the optical component packaging by using this low induced-stress soldering technique. The optimization was carried out by assessing components miniaturization while still assuring high robustness of the bond strength without creating a beam depolarization ratio of more than 1%. Results The outcome of the study showed the possibility of assembling laser optical components down to sizes of around 300 μm, creating a bond strength of 5 N and higher, and a depolarization ratio much lower than the proposed target of 1%. Conclusions Our results in terms of induced stress agreed with the finite element method result, which would imply correct post-processing laser simulations. This suggested that the solderjet bumping technique could robustly join components down to the laser emission beam size without strongly affecting the optical properties.
- 6 November 2017
- Published by EDP Sciences in Journal of the European Optical Society-Rapid Publications
- Vol. 13 (1) , 34
Open AccessSolderjet bumping packaging technique optimization for the miniaturization of laser devices
Background Low-stress soldering techniques can guarantee a minimized input of thermal energy allowing for the design and later assembly of more robust and miniaturized optical devices. However, in order to build miniaturized optical devices, these small-induced stresses produced by soldering techniques have to be investigated to guarantee that the stress-induced birefringence effects do not alter the device optical properties and requirements. Methods An analytical method that relates the stress-induced birefringence of laser components with their corresponding lasing capabilities has been compared to the real induced-stress results created in components packaged using solderjet technology. The main goal was to optimize the optical component packaging by using this low induced-stress soldering technique. The optimization was carried out by assessing components miniaturization while still assuring high robustness of the bond strength without creating a beam depolarization ratio of more than 1%. Results The outcome of the study showed the possibility of assembling laser optical components down to sizes of around 300 μm, creating a bond strength of 5 N and higher, and a depolarization ratio much lower than the proposed target of 1%. Conclusions Our results in terms of induced stress agreed with the finite element method result, which would imply correct post-processing laser simulations. This suggested that the solderjet bumping technique could robustly join components down to the laser emission beam size without strongly affecting the optical properties.