Stylianos D. Assimonis
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Stylianos D. Assimonis has a total of 87 co-authors. Here are the top co-authors by number of shared publications:
Vincent Fusco
Queens University Belfast,School of Electron., Electr. Eng. and Comput. Sci.,Belfast,UK
8 shared publications- Vincent Fusco
Centre for Wireless Innovation (CWI), School of Electronics, Electrical Engineering and Computer Science (EEECS), Queens University Belfast, Belfast, U.K.
8 shared publications - Christos S. Antonopoulos
Aristotle University of Thessaloniki
7 shared publications - George K. Karagiannidis
Aristotle University of Thessaloniki
7 shared publications - Manos M. Tentzeris
Georgia Institute of Technology
7 shared publications - Michail Matthaiou
Queen's University Belfast
7 shared publications
Latest Publications
- 26 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 13 (10) , 21994-22006
How Many Pinching Antennas Are Enough?
Programmable wireless environments (PWEs) have emerged as a key paradigm for next-generation communication networks, aiming to transform wireless propagation from an uncontrollable phenomenon into a reconfigurable process that can adapt to diverse service requirements. In this framework, pinching-antenna systems (PASs) have recently been proposed as a promising enabling technology, as they allow the radiation location and effective propagation distance to be adjusted by selectively exciting radiating points along a dielectric waveguide. However, most existing studies on PASs rely on the idealized assumption that pinching-antenna (PA) positions can be continuously adjusted along the waveguide, while realistically, only a finite set of pinching locations is available. Motivated by this, this paper analyzes the performance of two-state PASs, where the PA positions are fixed, and only their activation state can be controlled. By explicitly accounting for the spatial discreteness of the available pinching points, closed-form analytical expressions for the outage probability and the ergodic achievable data rate are derived. In addition, we introduce the pinching discretization efficiency (PDE) to quantify the performance gap between discrete and continuous pinching configurations, enabling a direct assessment of the number of PAs required to approximate the ideal continuous case. Finally, numerical results validate the analytical framework and show that near-continuous performance can be achieved with a limited number of PAs, offering useful insights for the design and deployment of PASs in PWEs.
- 26 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 13 (10) , 21994-22006
How Many Pinching Antennas Are Enough?
Programmable wireless environments (PWEs) have emerged as a key paradigm for next-generation communication networks, aiming to transform wireless propagation from an uncontrollable phenomenon into a reconfigurable process that can adapt to diverse service requirements. In this framework, pinching-antenna systems (PASs) have recently been proposed as a promising enabling technology, as they allow the radiation location and effective propagation distance to be adjusted by selectively exciting radiating points along a dielectric waveguide. However, most existing studies on PASs rely on the idealized assumption that pinching-antenna (PA) positions can be continuously adjusted along the waveguide, while realistically, only a finite set of pinching locations is available. Motivated by this, this paper analyzes the performance of two-state PASs, where the PA positions are fixed, and only their activation state can be controlled. By explicitly accounting for the spatial discreteness of the available pinching points, closed-form analytical expressions for the outage probability and the ergodic achievable data rate are derived. In addition, we introduce the pinching discretization efficiency (PDE) to quantify the performance gap between discrete and continuous pinching configurations, enabling a direct assessment of the number of PAs required to approximate the ideal continuous case. Finally, numerical results validate the analytical framework and show that near-continuous performance can be achieved with a limited number of PAs, offering useful insights for the design and deployment of PASs in PWEs.
- Open Access
Single-Feed Circularly Polarized Super Realized Gain Antenna
This paper presents a super realized gain, circularly polarized strip-crossed dipole antenna operating at 3.5 GHz. Superdirective behavior is achieved by leveraging strong inter-element mutual coupling through careful adjustment of the strip dimensions. The antenna features a single driven element, with the other element passively loaded with a reactive impedance. The structure is optimized to maximize left-hand circularly polarized (LHCP) realized gain, ensuring high polarization purity and good impedance matching. The optimized design exhibits a 50 $Ω$ impedance bandwidth of 3.29 - 4.17 GHz (23.75%) and an axial-ratio bandwidth of 3.43 - 3.57 GHz (4%). At 3.5 GHz, the antenna achieves a peak realized gain of 6.1 dB ($ka \approx 1.65$), with an axial ratio of 1.4 dB. These results demonstrate that circular polarization and superdirectivity can be simultaneously realized in a geometrically simple, low-profile ($0.15λ$) antenna, rendering it suitable for integration into compact sub-6~GHz wireless and sensing platforms.Open AccessSingle-Feed Circularly Polarized Super Realized Gain Antenna
This paper presents a super realized gain, circularly polarized strip-crossed dipole antenna operating at 3.5 GHz. Superdirective behavior is achieved by leveraging strong inter-element mutual coupling through careful adjustment of the strip dimensions. The antenna features a single driven element, with the other element passively loaded with a reactive impedance. The structure is optimized to maximize left-hand circularly polarized (LHCP) realized gain, ensuring high polarization purity and good impedance matching. The optimized design exhibits a 50 $Ω$ impedance bandwidth of 3.29 - 4.17 GHz (23.75%) and an axial-ratio bandwidth of 3.43 - 3.57 GHz (4%). At 3.5 GHz, the antenna achieves a peak realized gain of 6.1 dB ($ka \approx 1.65$), with an axial ratio of 1.4 dB. These results demonstrate that circular polarization and superdirectivity can be simultaneously realized in a geometrically simple, low-profile ($0.15λ$) antenna, rendering it suitable for integration into compact sub-6~GHz wireless and sensing platforms. - Open Access
How Many Pinching Antennas Are Enough?
Programmable wireless environments (PWEs) have emerged as a key paradigm for next-generation communication networks, aiming to transform wireless propagation from an uncontrollable phenomenon into a reconfigurable process that can adapt to diverse service requirements. In this framework, pinching-antenna systems (PASs) have recently been proposed as a promising enabling technology, as they allow the radiation location and effective propagation distance to be adjusted by selectively exciting radiating points along a dielectric waveguide. However, most existing studies on PASs rely on the idealized assumption that pinching-antenna (PA) positions can be continuously adjusted along the waveguide, while realistically only a finite set of pinching locations is available. Motivated by this, this paper analyzes the performance of two-state PASs, where the PA positions are fixed and only their activation state can be controlled. By explicitly accounting for the spatial discreteness of the available pinching points, closed-form analytical expressions for the outage probability and the ergodic achievable data rate are derived. In addition, we introduce the pinching discretization efficiency to quantify the performance gap between discrete and continuous pinching configurations, enabling a direct assessment of the number of PAs required to approximate the ideal continuous case. Finally, numerical results validate the analytical framework and show that near-continuous performance can be achieved with a limited number of PAs, offering useful insights for the design and deployment of PASs in PWEs.
Open AccessHow Many Pinching Antennas Are Enough?
Programmable wireless environments (PWEs) have emerged as a key paradigm for next-generation communication networks, aiming to transform wireless propagation from an uncontrollable phenomenon into a reconfigurable process that can adapt to diverse service requirements. In this framework, pinching-antenna systems (PASs) have recently been proposed as a promising enabling technology, as they allow the radiation location and effective propagation distance to be adjusted by selectively exciting radiating points along a dielectric waveguide. However, most existing studies on PASs rely on the idealized assumption that pinching-antenna (PA) positions can be continuously adjusted along the waveguide, while realistically only a finite set of pinching locations is available. Motivated by this, this paper analyzes the performance of two-state PASs, where the PA positions are fixed and only their activation state can be controlled. By explicitly accounting for the spatial discreteness of the available pinching points, closed-form analytical expressions for the outage probability and the ergodic achievable data rate are derived. In addition, we introduce the pinching discretization efficiency to quantify the performance gap between discrete and continuous pinching configurations, enabling a direct assessment of the number of PAs required to approximate the ideal continuous case. Finally, numerical results validate the analytical framework and show that near-continuous performance can be achieved with a limited number of PAs, offering useful insights for the design and deployment of PASs in PWEs.
- 14 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (9) , 6787-6798
A Highly Efficient, Scalable, Tetra-Band Metamaterial-Based Ambient RF Energy Harvester
This article presents an innovative metamaterial-based radio frequency (RF) energy harvesting system designed to efficiently capture ambient RF energy across multiple frequency bands, including Wi-Fi (2.45 GHz) and 5G (0.9, 1.8, 2.1 GHz). Utilizing electric inductive-capacitive resonators and a rectification circuit, the system converts ambient RF energy into direct current (dc) power with high efficiency. Specifically, a single unit cell of the proposed $8 \times 8$ harvester is capable of generating up to $562~\mu $ W under an RF ambient power density of $40~\mu $ W/cm2. This high efficiency and scalability make it ideal for powering low-power Internet-of-Things (IoT) devices and sensors. The design emphasizes optimizing the unit cell to minimize computational complexity, enabling a more straightforward and scalable implementation. Experimental results demonstrate the system’s ability to efficiently harvest RF power across the specified bands, validating its potential as a sustainable solution for the growing power demands of IoT networks.
- 14 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (9) , 6787-6798
A Highly Efficient, Scalable, Tetra-Band Metamaterial-Based Ambient RF Energy Harvester
This article presents an innovative metamaterial-based radio frequency (RF) energy harvesting system designed to efficiently capture ambient RF energy across multiple frequency bands, including Wi-Fi (2.45 GHz) and 5G (0.9, 1.8, 2.1 GHz). Utilizing electric inductive-capacitive resonators and a rectification circuit, the system converts ambient RF energy into direct current (dc) power with high efficiency. Specifically, a single unit cell of the proposed $8 \times 8$ harvester is capable of generating up to $562~\mu $ W under an RF ambient power density of $40~\mu $ W/cm2. This high efficiency and scalability make it ideal for powering low-power Internet-of-Things (IoT) devices and sensors. The design emphasizes optimizing the unit cell to minimize computational complexity, enabling a more straightforward and scalable implementation. Experimental results demonstrate the system’s ability to efficiently harvest RF power across the specified bands, validating its potential as a sustainable solution for the growing power demands of IoT networks.
- Open Access
Compact Meandered Dipole Array Presenting Super-Realized Gain
This paper presents a comprehensive study of a compact two-element meandered dipole array aimed at achieving super-realized gain. An optimization was performed using a Genetic Algorithm (GA) implemented in MATLAB, targeting the maximization of the realized gain in the end-fire direction. Three primary excitation schemes were evaluated: the conventional optimization to achieve superdirectivity (signal magnitude and phase angle), phase-only optimization, and uniform excitation (characterized by equal amplitude and no phase shift). The results show that by carefully optimizing both the signal magnitudes and phase angles, the array could achieve a substantial improvement in realized gain. Phase-only optimization provided a competitive realized gain with only minor reductions compared to conventional optimization, suggesting that optimizing the signal phase alone can be an effective strategy in practical implementations.
Open AccessCompact Meandered Dipole Array Presenting Super-Realized Gain
This paper presents a comprehensive study of a compact two-element meandered dipole array aimed at achieving super-realized gain. An optimization was performed using a Genetic Algorithm (GA) implemented in MATLAB, targeting the maximization of the realized gain in the end-fire direction. Three primary excitation schemes were evaluated: the conventional optimization to achieve superdirectivity (signal magnitude and phase angle), phase-only optimization, and uniform excitation (characterized by equal amplitude and no phase shift). The results show that by carefully optimizing both the signal magnitudes and phase angles, the array could achieve a substantial improvement in realized gain. Phase-only optimization provided a competitive realized gain with only minor reductions compared to conventional optimization, suggesting that optimizing the signal phase alone can be an effective strategy in practical implementations.
- 7 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (9) , 7030-7040
Super Realized Gain Antenna Array
In this study, we introduce a novel antenna design method for superdirective antennas that combines low-complexity with high radiation efficiency, while being impedance-matched to 50 Ω. We applied this approach to design, fabricate, and measure a superdirective antenna array with a high realized antenna gain (i.e. 6.3 dBi) and radiation efficiency (i.e. 99.3%), consisting of two strip dipole elements operating at a frequency of 3.5 GHz. The fabricated antenna has an electrical size of 1.55, underscoring its compactness in addition to its high gain. Our approach is distinguished by its ability to achieve high directivity and radiation efficiency, along with impedance matching to 50 Ω, through meticulous adjustments of the strip dimensions (i.e., length and width) and the phase difference between elements. This method eliminates the need for external impedance matching networks, amplifiers, attenuators, parasitic elements, or loads, marking a significant advancement in the development of practical superdirective antenna designs.
- 7 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (9) , 7030-7040
Super Realized Gain Antenna Array
In this study, we introduce a novel antenna design method for superdirective antennas that combines low-complexity with high radiation efficiency, while being impedance-matched to 50 Ω. We applied this approach to design, fabricate, and measure a superdirective antenna array with a high realized antenna gain (i.e. 6.3 dBi) and radiation efficiency (i.e. 99.3%), consisting of two strip dipole elements operating at a frequency of 3.5 GHz. The fabricated antenna has an electrical size of 1.55, underscoring its compactness in addition to its high gain. Our approach is distinguished by its ability to achieve high directivity and radiation efficiency, along with impedance matching to 50 Ω, through meticulous adjustments of the strip dimensions (i.e., length and width) and the phase difference between elements. This method eliminates the need for external impedance matching networks, amplifiers, attenuators, parasitic elements, or loads, marking a significant advancement in the development of practical superdirective antenna designs.
- Open Access
Practical Superdirective and Efficient Rectenna for Low-Power RF Energy Harvesting
This paper presents the design and analysis of a superdirective rectenna optimized for enhanced RF-to-DC efficiency and realised gain, featuring direct impedance matching between the antenna and the rectifier. Employing passively loaded, low profile strip dipoles on a low-loss substrate, the rectenna achieves a realised gain of 6.9 dBi and an RF-to-DC efficiency of 22.1% at -20 dBm.
Open AccessPractical Superdirective and Efficient Rectenna for Low-Power RF Energy Harvesting
This paper presents the design and analysis of a superdirective rectenna optimized for enhanced RF-to-DC efficiency and realised gain, featuring direct impedance matching between the antenna and the rectifier. Employing passively loaded, low profile strip dipoles on a low-loss substrate, the rectenna achieves a realised gain of 6.9 dBi and an RF-to-DC efficiency of 22.1% at -20 dBm.
- Open Access
Low-profile Super-Realised Gain Antennas
This study introduces an novel approach to the design of low-profile superdirective antenna arrays, employing parasitic elements. The proposed design concept was verified through the analysis of a two-element antenna array consisting of strip dipoles, operating at a frequency of $3.5$ GHz within the sub-6 5G frequency band. The antenna array was optimized for realized gain, a key antenna parameter considering both ohmic and return losses. The design parameters included the lengths and widths of the strip dipoles, along with a reactance load connected to the parasitic element. The driven element was excited by a sinusoidal voltage signal with a magnitude of $1$ V, eliminating the need for amplifiers, attenuators, phase shifters, or impedance matching networks. Results demonstrated that this design concept enables the achievement of superdirectivity, with inter-element distances as small as $0.1λ$, resulting in low-profile, compact, high directional antenna systems.Open AccessLow-profile Super-Realised Gain Antennas
This study introduces an novel approach to the design of low-profile superdirective antenna arrays, employing parasitic elements. The proposed design concept was verified through the analysis of a two-element antenna array consisting of strip dipoles, operating at a frequency of $3.5$ GHz within the sub-6 5G frequency band. The antenna array was optimized for realized gain, a key antenna parameter considering both ohmic and return losses. The design parameters included the lengths and widths of the strip dipoles, along with a reactance load connected to the parasitic element. The driven element was excited by a sinusoidal voltage signal with a magnitude of $1$ V, eliminating the need for amplifiers, attenuators, phase shifters, or impedance matching networks. Results demonstrated that this design concept enables the achievement of superdirectivity, with inter-element distances as small as $0.1λ$, resulting in low-profile, compact, high directional antenna systems. - Open Access
Super-Realized Gain Huygens Antennas
This study presents a superdirective antenna array specifically designed for the sub-6 5G generation frequency range, incorporating pioneering Huygens antenna elements. The optimized structure achieves a realized gain that surpasses Harrington's well-known maximum theoretical limit for antenna directivity, effectively addressing practical concerns related to ohmic and return losses. Additionally, the compact size of the proposed antenna array, as opposed to a uniform linear array, offers the potential to fabricate highly radiation-efficient, high-directivity antennas in a compact form.
Open AccessSuper-Realized Gain Huygens Antennas
This study presents a superdirective antenna array specifically designed for the sub-6 5G generation frequency range, incorporating pioneering Huygens antenna elements. The optimized structure achieves a realized gain that surpasses Harrington's well-known maximum theoretical limit for antenna directivity, effectively addressing practical concerns related to ohmic and return losses. Additionally, the compact size of the proposed antenna array, as opposed to a uniform linear array, offers the potential to fabricate highly radiation-efficient, high-directivity antennas in a compact form.