HSHüseyin Rahmi Seren

Hüseyin Rahmi Seren

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Hüseyin Rahmi Seren has a total of 70 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Miniaturized Casing Collar Locator for Small Downhole Robots

    by Huseyin R. Seren, Max Deffenbaugh

    Despite advances in robotics for many harsh environments, the downhole environment is rarely accessed by robots. Small, autonomous robots for logging oil and gas wells potentially offer significant cost savings over conventional wireline logging tools, but there are some major technical challenges to overcome. Among these is navigation or how the robot can know its own position along the well. Oil and gas wells are lined with steel casing, made up of 40-ft-long pipe joints held together by threaded collars. The collar locations could potentially be used as features for navigation, but conventional magnetic casing collar locator (CCL) sensors are large and must be mechanically stabilized within the casing. This letter investigates the design of CCLs for small, untethered robots with limited energy resources.


  • Electromechanically tunable metasurface transmission waveplate at terahertz frequencies

    by Xiaoguang Zhao, Jacob Schalch, Jingdi Zhang, Huseyin R. Seren, Guangwu Duan, Richard D. Averitt, Xin Zhang

    Dynamic polarization control of light is essential for numerous applications ranging from enhanced imaging to material characterization and identification. We present a reconfigurable terahertz metasurface quarter-wave plate consisting of electromechanically actuated microcantilever arrays. Our anisotropic metasurface enables tunable polarization conversion through cantilever actuation. Specifically, voltage-based actuation provides mode-selective control of the resonance frequency, enabling real-time tuning of the polarization state of the transmitted light. The polarization tunable metasurface has been fabricated using surface micromachining and characterized using terahertz time domain spectroscopy. We observe a ∼230  GHz cantilever actuated frequency shift of the resonance mode, sufficient to modulate the transmitted wave from pure circular polarization to linear polarization. Our CMOS-compatible tunable quarter-wave plate enriches the library of terahertz optical components, thereby facilitating practical applications of terahertz technologies.


  • An Untethered Sensor Platform for Logging Vertical Wells

    by Huseyin R. Seren, Erjola Buzi, Latifah Al-Maghrabi, Gregory Ham, Greg Bernero, Max Deffenbaugh

    The measurement of fluid and rock properties within oil and gas wells is critical to efficient hydrocarbon production. These data are generally acquired by wireline logging, where sensors are lowered into the well at the end of a long cable. The handling of this cable adds significant cost to downhole data acquisition. In this paper, a proof of concept demonstration of an untethered sensor platform for logging vertical wells is presented. The platform is the size of a golf ball and works based on buoyancy change. The buoyant sensor housing and electronics initially holds a weight such that it sinks in the well. It releases the weight when it reaches a programmed depth and floats back up to the surface, logging data during the whole operation. The data are downloaded after retrieving the sensor. This miniaturized, tetherless platform can reduce the cost of logging operations and pave the way for semipermanent downhole sensors.


  • A tunable terahertz metamaterial based on a micro-cantilever array

    by Xiaoguang Zhao, Jacob Schalch, Jingdi Zhang, Huseyin R. Seren, Guangwu Duan, Richard D. Averitt, Xin Zhang

    This paper reports a mechanically tunable terahertz metamaterial based on microscale electrostatic actuators. The device consists of an array of suspended cantilevers, forming LC resonators with underlying capacitive pads. The applied voltage can pull the cantilever downwards to increase the capacitance value in the resonator, and thus, redshift the resonant frequency. In our preliminary experiments, the resonant frequency can be tuned from 1.105 THz to 1.06 THz under a 40 V voltage; at the same time, the transmission amplitude can be modulated by approximately 15 dB at the resonant frequencies. The results enables the implementation of tunable terahertz devices, including modulators, polarizers and waveplates, employing conventional micro-electromechanical structures.

  • Microfluidic channel-based wireless charging and communication platform for microsensors with miniaturized onboard antenna

    by G Duan, X Zhao, H R Seren, C Chen, A Li, X Zhang

    A double layer spiral antenna with side length of 380 μm was fabricated by a multi-step electroplating process, and integrated with a commercialized passive RFID chip to realize the RF power harvesting and communication functions of a microsensor. To power up and communicate with the microchips, a single layer spiral reader antenna was fabricated on top of a glass substrate with side length of 1 mm. The microchips and the reader antenna were both optimized at the frequency of 915 MHz. Due to the small size of the reader antenna, the strength of the magnetic field decreased dramatically along the axial direction of the reader antenna, which limited the working distance to within 1 mm. To enclose the microchips within the reading range, a three-layer microfluidic channel was designed and fabricated. The channel and cover layers were fabricated by laser cutting of acrylic sheets, and bonded with the glass substrate to form the channel. To operate multiple microchips simultaneously, separation and focusing function units were also designed. Low loss pump oil was used to transport the microchips flowing inside the channel. Within the reading area, the microchips were powered up, and their ID information was retrieved and displayed on the computer interface successfully.


  • Open Access

    Nonlinear terahertz devices utilizing semiconducting plasmonic metamaterials

    by Huseyin R Seren, Jingdi Zhang, George R Keiser, Scott J Maddox, Xiaoguang Zhao, Kebin Fan, Seth R Bank, Xin Zhang, Richard D Averitt

    The development of responsive metamaterials has enabled the realization of compact tunable photonic devices capable of manipulating the amplitude, polarization, wave vector and frequency of light. Integration of semiconductors into the active regions of metallic resonators is a proven approach for creating nonlinear metamaterials through optoelectronic control of the semiconductor carrier density. Metal-free subwavelength resonant semiconductor structures offer an alternative approach to create dynamic metamaterials. We present InAs plasmonic disk arrays as a viable resonant metamaterial at terahertz frequencies. Importantly, InAs plasmonic disks exhibit a strong nonlinear response arising from electric field-induced intervalley scattering, resulting in a reduced carrier mobility thereby damping the plasmonic response. We demonstrate nonlinear perfect absorbers configured as either optical limiters or saturable absorbers, including flexible nonlinear absorbers achieved by transferring the disks to polyimide films. Nonlinear plasmonic metamaterials show potential for use in ultrafast terahertz (THz) optics and for passive protection of sensitive electromagnetic devices.


  • Open Access

    Wirelessly powered micro-tracer enabled by miniaturized antenna and microfluidic channel

    by G Duan, X Zhao, H R Seren, C Chen, X Zhang

    A miniaturized antenna, 380μm by 380μm in size, was fabricated and integrated with a commercialized passive RFID chip to form a micro-tracer, whose size was 2mm by 1mm in total. The micro-tracer was wirelessly powered and interrogated by a single layer spiral reader antenna through near field coupling. To maximize the working distance, the resonant frequency of micro-tracer and reader antenna were matched at 840MHz. Due to the ultra small size of the tracer antenna, power transfer efficiency decreased dramatically as the distance between tracer antenna and reader antenna increased, thus the working distance of the microtracer was limited within 1mm. To achieve massive operation of the micro-tracer, a microfluidic platform was fabricated with in channel focusing and separation. Acrylic sheets were laser cut to define the channel and cover structure, then bonded together layer by layer with a glass substrate, on which reader antenna was integrated. Pump oil was used as the fluidic media carrying the micro-tracer flowing inside the microfluidic channel. The wireless power transfer and real-time communication was demonstrated with the micro-tracer flowing above the reader antenna, as the ID of the micro-tracer was retrieved and displayed on a computer screen.


  • THz materials discovery and integration: The search for novel functionality

    by Huseyin R Seren, George R. Keiser, Jingdi Zhang, Scott Maddox, Xiaoguang Zhao, Kebin Fan, Seth Bank, Xin Zhang, Richard D. Averitt

    The functionality of terahertz metamaterials can be dramatically increased through judicious materials integration. In addition to semiconductors, materials ranging from graphene to superconductors can enhance or enable new functionality. Following a brief review, we present recent results creating nonlinear metamaterials using InAs and YBa2Cu3O7, and discuss the broad range of possibilities to explore using transition metal oxides in the design of metamaterials.

  • Optically tunable metamaterial perfect absorber on highly flexible substrate

    by Xiaoguang Zhao, Kebin Fan, Jingdi Zhang, Huseyin R. Seren, Grace D. Metcalfe, Michael Wraback, Richard D. Averitt, Xin Zhang


  • A real-time tunable terahertz metamaterial based on broadside-coupled split ring resonators

    by X. Zhao, K. Fan, J. Zhang, G.R. Keiser, H.R. Seren, R.D. Averitt, X. Zhang

    This paper reports a real-time tunable metamaterial based on broadside-coupled split ring resonators (BC-SRRs). The device is composed of two layers of SRRs stacked together with an air gap spacer, forming the BC-SRR configuration. One of the layers is fixed, while the other can be driven by an electrostatic comb-drive actuator. The lateral displacement between the two layers of SRRs can be changed by the actuator, resulting in the tuning of the resonance frequencies of the BC-SRRs and the transmission spectrum of the device. The preliminary results show that the resonance frequency can be tuned up to 100GHz corresponding to an 18μm lateral displacement. Our tunable metamaterials have promising applications as THz modulators, filters and sensors.