RCRihong Cong

Rihong Cong

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Rihong Cong has a total of 156 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Cation-Size-Controlled Structural and Magnetic Ground State Transitions in Co2+-Based Honeycomb-Derived Oxides Na0.5 RE 0.5Co2TeO6 ( RE = La, Nd, Sm, Eu, Tb, Dy, Yb, and Y)

    by Siqi Ma, Haoyu Wu, Zien Cheng, Dexiang Gao, Le Kang, Rihong Cong, Tao Yang, Pengfei Jiang

    Honeycomb lattices containing spin–orbit-entangled Co2+ ions with effective Jeff = 1/2 moments provide promising platforms for enhancing strong quantum fluctuations and thus realizing potential quantum spin-liquid states. Here, we report a series of honeycomb-derived tellurates, “Na0.5RE0.5Co2TeO6” (NRECTO, RE = La, Nd, Sm, Eu, Tb, Dy, Yb, and Y). The increased size mismatch between Na+ and RE3+ drives an orthorhombic-to-hexagonal structural transition for NRECTO, accompanied by reconstruction in the connectivity of the [Co2TeO6]2– double-rutile chains and transformation in hexagonal channel topologies. High-resolution synchrotron X-ray diffraction and neutron powder diffraction reveal that both structures retain similar three-dimensional Co2+ topologies derived from AAA-stacked buckled honeycomb layers. Magnetic measurements revealed that orthorhombic NLaCTO exhibits a long-range antiferromagnetic order below 13 K, as confirmed by DC and AC susceptibility and a λ-type heat-capacity anomaly, whereas hexagonal NYCTO exhibits glassy magnetic freezing below 11 K, characterized by frequency-dependent AC susceptibility and slow spin dynamics. Despite comparable Co2+–O–Co2+ exchange pathways and Co-topologies are retained in both structures, their contrasting magnetic behavior demonstrates that subtle structural differences can strongly reshape the magnetic energy landscape. These results establish chemical-unit substitution as an effective strategy for controlling magnetism in Co2+-based honeycomb oxides.

  • Frontier Orbital Engineering of the Oxide Photocatalyst K2Zn2Nb4O13 by Coupling Crystal Structure, Electronic Structure, and Chemical Bonding

    by Qubin Shi, Yongfeng Zhou, Zhiyuan Lei, Guangxiang Lu, Zien Cheng, Can Yang, Le Kang, Dexiang Gao, Pengfei Jiang, Rihong Cong, et al.

    Rational design of oxide photocatalysts with intrinsically efficient bulk carrier transport remains a major challenge because carrier migration is strongly governed by the complex interplay among crystal structure, electronic structure, and chemical bonding. Here, we propose a Frontier orbital engineering strategy to regulate intrinsic carrier transport by reconstructing the Frontier orbital composition within a structurally robust oxide framework. Based on the tunnel-type Na2Ti6O13 structure, the oxide semiconductor K2Zn2Nb4O13 was designed and synthesized through the cooperative substitution of Ti4+ by Zn2+/Nb5+. Combined high-resolution PXRD and NPD refinements confirm the successful realization of the designed tunnel framework with complete Zn/Nb ordering. Orbital-resolved electronic structure and chemical bonding analyses demonstrate that the valence band maximum (VBM) and conduction band minimum (CBM) are mainly derived from Zn 3d−O 2p and Nb1 4d−O 2p antibonding orbitals, respectively. Such orbital decoupling of Frontier orbital contributing units and the continuous covalent networks along the b-axis provide favorable pathways for bulk carrier migration and establish the structural and electronic basis for the proposed Frontier orbital engineering strategy. Experimentally, Pd-loaded K2Zn2Nb4O13 exhibits enhanced photocatalytic H2 generation activity, achieving a rate of 119(3) μmol/h. This work provides Frontier orbital engineering as a design paradigm for functional materials, enabling the rational manipulation of intrinsic charge transport properties through the synergistic regulation of crystal structure, electronic structure, and chemical bonding.

  • Unveiling Bulk Carrier Transport in LiTaGeO5 and NaTaGeO5 Photocatalysts through Integrated Crystal and Electronic Structure Analyses

    by Zhiyuan Lei, Guangxiang Lu, Siqi Ma, Zien Cheng, Pengfei Jiang, Rihong Cong, Tao Yang

    The rational design of semiconductor photocatalysts with efficient bulk charge separation remains a major challenge for solar energy conversion. Herein, titanite-type LiTaGeO5 (LTGO) and NaTaGeO5 (NTGO) are investigated as model systems to elucidate how crystal structures and electronic structures govern carrier transport behavior in oxide semiconductors. Structural analyses reveal that both compounds contain quasi-one-dimensional [TaO6] octahedral chains separated by [GeO4] tetrahedra and alkali-metal cations. The substitution of local structural adjustments induces distinct local structural rearrangements within the framework while preserving the overall chain-like connectivity. Electronic structure and chemical bonding analyses demonstrate that the valence band maximum (VBM) is dominated by nonbonding O 2p orbitals, whereas the conduction band minimum (CBM) is contributed by Ta 5d–O 2p and Ge 4s–O 2s antibonding orbitals, revealing that the frontier electronic states involve multiple structural units rather than solely the [TaO6] chains. Nevertheless, both compounds exhibit preferential carrier transport along the [TaO6] chain direction due to the anisotropic connectivity of frontier-orbital-contributing structural units. Under UV irradiation, Pd-loaded LTGO and NTGO achieve hydrogen evolution rates of 36.7(4) and 59.6(3) μmol/h, respectively, with NTGO exhibiting superior photocatalytic performance. This work demonstrates that the spatial connectivity of frontier-orbital-contributing structural units, together with local structural modulation and chemical bonding characteristics, is crucial for understanding bulk carrier transport and photocatalytic behavior in oxide semiconductors.

  • Highly thermally stable Ce 3+ /Tb 3+ -activated Ba 2 MgY 2 (BO 3 ) 4 phosphors prepared by a one-step reductive solid-state reaction

    by Yan Gao, Rihong Cong, Tao Yang

    One-step reductive synthesis enables remarkably enhanced thermal stability of Ce 3+ - and Ce 3+ /Tb 3+ -activated Ba 2 MgY 2 (BO 3 ) 4 phosphors under near-UV excitation.

  • Doubly Ordered Stuffed Tridymite CaBaZn2Ge2O8: Structural Dimensionality Reduction via A-Site-Layered Ordering

    by Guangxiang Lu, Liyang Zhang, Zien Cheng, Joerg C. Neuefeind, Rihong Cong, Tao Yang, Pengfei Jiang

    Cationic ordering is a powerful strategy for tuning crystal structure and physical properties in complex oxides, yet its pivotal role in stuffed tridymites remains unexplored, particularly concurrent A- and B-site ordering. Here, we report the rational design of CaBaZn2Ge2O8, a doubly ordered A’A″B′2B″2O8-type-stuffed tridymite, stabilized by introducing large size mismatches at both A- and B-sites. High-resolution neutron powder diffraction (NPD), three-dimensional electron diffraction, and neutron pair distribution function (nPDF) analyses reveal a centrosymmetric P̅3-structure with layered A-site Ca2+/Ba2+ ordering and B-site alternatively ordered Zn2+/Ge4+ arrangements along the six-membered rings (SMRs). Remarkably, this structure possesses a distinctive UUUUUU/DDDDDD SMR topology, where the cooperative A- and B-site ordering transforms the conventional three-dimensional-stuffed tridymite framework into two-dimensional [Zn2Ge2O8]4– layers, confirmed at the atomic scale by aberration-corrected scanning transmission electron microscopy. Theoretical calculations reveal that CaBaZn2Ge2O8 has a direct band gap value of ∼4.5 eV; however, the reduced structural dimensionality enables efficient separation of photogenerated charge carriers, thereby yielding an enhanced photocatalytic H2 evolution rate compared to the three-dimensional tetrahedral framework-stuffed tridymite BaZnGeO4. These findings demonstrate that double cation ordering can fundamentally tailor the framework topology and dimensionality, providing a viable strategy for accessing tetrahedral framework-derived oxides with intriguing functionalities.

  • Accommodation of Oversized In3+ in an Octahedra-Based Aluminoborate Framework Enables Enhanced Lewis Acidity and Epoxide Ring-Opening Catalysis

    by Yurong Sun, Lijuan Tan, Wenliang Gao, Rihong Cong, Tao Yang

    The stabilization of oversized heteroatoms within microporous frameworks remains a longstanding challenge because of the geometric and thermodynamic limitations associated with framework substitution. Indium is a particularly intriguing case, as its large ionic radius and coordination preference generally prevent its incorporation into conventional tetrahedral microporous frameworks, where it typically exists as extra-framework species. Herein, In3+ can be successfully accommodated within the octahedra-based aluminoborate framework PKU-1 through isomorphous substitution of framework Al3+ sites, which is proved by comprehensive structural and compositional characterizations. More importantly, 27Al, 11B, and 1H MAS NMR results reveal that the incorporation of oversized In3+ induces pronounced local structural distortion and significant reorganization of the framework microenvironment. These structural changes lead to a nearly one-order-of-magnitude increase in acid-site density and the generation of abundant Lewis acid centers. Consequently, it exhibits outstanding catalytic performance in the ring-opening ammonolysis of epoxides with amines, affording β-amino alcohols in 99.8% yield with excellent selectivity. Correlation of structural, spectroscopic, and catalytic results establishes a clear framework distortion–Lewis acidity–catalytic activity relationship. This work provides a rare example of stabilizing oversized In3+ species within a microporous framework and demonstrates how framework distortion can be exploited to create highly active Lewis acid catalysts.

  • Ba7Zn5Ga6O21: Terminal Oxygens Enable High Oxide-Ion and Proton Conductivity in a Condensed Three-Dimensional Tetrahedral Framework

    by Zien Cheng, Guangxiang Lu, Maxim Avdeev, Ying Wang, Zhengyang Zhou, Rihong Cong, Tao Yang, Pengfei Jiang

    Functional oxides exhibiting high oxide-ion and proton conductivity are crucial for advancing solid oxide fuel cells and related electrochemical technologies. Here, we demonstrate that terminal oxygens can endow the condensed three-dimensional (3D) tetrahedral framework with additional local structural flexibility and thus enable significant dual oxide-ion and proton conduction in Ba7Zn5Ga6O21. The polar P31c-structure of Ba7Zn5Ga6O21 was solved by combined powder X-ray diffraction (PXRD), 3D electron diffraction (ED), and neutron powder diffraction (NPD), and its noncentrosymmetry was confirmed by second-harmonic generation (SHG). The framework structure comprises highly strained tridymite-type layers linked by (Zn/Ga)3O10 units and contains ∼9.5% terminal oxygens. Interestingly, NPD and theoretical calculations further revealed that, in Zn-doped Ba7Zn5+xGa6–xO21–0.5x, oxygen vacancies preferentially occupy terminal oxygen sites, enabling moderate oxide-ion conduction at elevated temperatures and substantial proton conductivity (∼0.1 mS/cm) under humidified air below 400 °C. Ab initio molecular dynamics (AIMD) simulations deciphered a predominantly 2D vacancy-mediated oxide-ion conduction mechanism within the tridymite layers, where migration is enabled by cooperative opening of six-membered rings and concurrent formation of ten-membered rings. These findings establish Ba7Zn5+xGa6–xO21–0.5x as a vacancy-mediated 3D tetrahedral framework dual-ion conductor.

  • Cationic Size Mismatch Dictates Structural Topology and Magnetic Properties of Honeycomb-Derived Na0.5 RE 0.5Ni2TeO6 ( RE = La–Lu and Y)

    by Siqi Ma, Shunjie Tang, Zien Cheng, Keyu Chen, Qiang Zhang, Wenhai Ji, Ping Miao, Rihong Cong, Tao Yang, Pengfei Jiang

    Pursuit of quantum spin liquid (QSL) states in the two-dimensional (2D) honeycomb lattice is particularly appealing and challenging. Here, we report the hereovalent substitution strategy to tune the crystal structure and magnetism of the honeycomb-derived oxide family ANi2TeO6. Substituting A2+ with the charge-balanced chemical unit [0.5Na+ + 0.5RE3+] yields a new family of oxides Na0.5RE0.5Ni2TeO6 (NRENTO, RE = La–Lu and Y), where the size mismatch between Na+ and RE3+ drives an orthorhombic-to-hexagonal reconstructive structural transition. These two structures differ remarkably in connectivity geometry among [Ni2TeO6]2– double-rutile chains, resulting in different hexagonal channels topologies stuffed by Na+/RE3+ cations. Nevertheless, both structures retain a similar buckled Ni2+ honeycomb lattice, the different degrees of distortion, however, give rise to distinct magnetic ground states. Specifically, the orthorhombic NLaNTO shows long-range canted antiferromagnetic ordering below 26 K, whereas the hexagonal NLuNTO exhibits typical low-dimensional and strongly frustrated magnetic behavior with no signature of long-range magnetic ordering down to 10 K. These results demonstrate that subtle structural changes significantly modify magnetic exchange pathways in this honeycomb-derived framework. Na0.5RE0.5Ni2TeO6 provides a chemically tunable platform that couples composition, lattice distortion, and magnetic dimensionality, offering a route to approaching novel magnetic ground states, including QSL-like behavior.


  • Unlocking a Chemically Fertile Moderate-Pressure Regime in High-Pressure Borate Synthesis Using Soft-Chemistry Precursors

    by Yunwei Zhao, Zien Cheng, Pengfei Jiang, Ting Wen, Yonggang Wang, Zhengyang Zhou, Rihong Cong, Tao Yang

    Borates exhibit exceptional structural diversity, yet high-pressure/high-temperature (HP/HT) synthesis has predominantly focused on increasingly extreme conditions, leaving moderate pressure-temperature regimes largely unexplored. Here, we demonstrate that this limitation is primarily kinetic rather than thermodynamic. By integrating sol-gel-derived, chemically homogeneous precursors with HP/HT treatment, we establish a precursor-controlled strategy that enables systematic access to a chemically fertile moderate-pressure regime (≤3 GPa, ≤ 800 °C). This approach allows the synthesis of known high-pressure borates (β-SmB3O6, β-SnB4O7, δ-BiB3O6) under substantially milder conditions and extends the β-REB5O9 (RE = Pr, Nd) series. Moreover, it leads to the discovery of two new families of hydrated borates, β-REB6O9(OH)3 (RE = La-Nd) and RE6B36O59(OH)8 (RE = Nd, Sm, Eu), whose structures are resolved by 3D electron diffraction and powder XRD. Both families adopt polar P63 symmetry and feature large 12- and 16-membered ring channel topologies within fully tetrahedral borate frameworks, an outcome that contrasts with the expected densification under compression. Temperature-dependent phase evolution further reveals that moderate HP/HT conditions can stabilize partially dehydrated, metastable frameworks inaccessible at ambient pressure. These results demonstrate that precursor-controlled kinetics can redefine accessible phase space in HP/HT synthesis, establishing moderate-pressure regimes as productive platforms for discovering structurally complex borates and beyond.