RDRajnarayan De

Rajnarayan De

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Rajnarayan De has a total of 93 co-authors. Here are the top co-authors by number of shared publications:

  • K. Divakar Rao

    Photonics and Quantum Optics Section, Atomic and Molecular Physics Division, Bhabha Atomic Research Centre Facility, Visakhapatnam, India

    16 shared publications
  • S. Maidul Haque

    Photonics and Quantum Optics Section, Atomic and Molecular Physics Division, Bhabha Atomic Research Centre Facility, Visakhapatnam, India

    12 shared publications
  • S. Maidul Haque

    Tokyo Polytechnic University, Optical Design Laboratory, Atsugi, Japan

    9 shared publications
  • C. Prathap

    Photonics and Quantum Optics Section, Atomic and Molecular Physics Division, Bhabha Atomic Research Centre Facility, Visakhapatnam, India

    8 shared publications
  • S. Tripathi

    Atomic & Molecular Physics Division, Bhabha Atomic Research Centre, VIZAG Centre, Visakhapatnam 530 012, India

    8 shared publications
  • N. K. Sahoo

    Atomic and Molecular Physics Division, Bhabha Atomic Research Centre 3 , Mumbai 400085, India

    7 shared publications

Latest Publications

  • Low-temperature growth of environmentally stable epitaxial VO2 thin films

    by Rajnarayan De, C. Kar, Kiran Baraik, B. R. Kumar, S. Pradhan

    The requirement of substantially higher growth temperature and post-deposition annealing for epitaxial growth of vanadium oxide (VO2) films has always remained a bottleneck for their practical applicability in various thermochromic smart devices. Here, we report epitaxial growth of vanadium oxide (VO2) thin films on sapphire substrates using the reactive gas pulsing technique (RGPT) in conjunction with intense plasma activation facilitated by asymmetric bipolar pulse DC (ABPDC) sputtering. The deposition methodology followed in this work utilizes growth temperature as low as 275 °C as opposed to the substantially higher temperatures (>500 °C) reported in previous works. The process also avoids any post-processing of the films including annealing. The films deposited in RGPT mode show good environmental stability over a long time range using a simple deposition methodology without placing any top barrier layers to stop ageing. Investigation of the semiconductor-to-metal transition (SMT) behavior reveals a very sharp reversible first-order phase transition with sharpness ∼2 °C (very close to bulk single crystals) and switching ratio of ∼1 × 104 achieved with the RGPT mode. The epitaxial relationship of [010]VO2 ǁ [0001]Al2O3 (out-of-plane) and [001]VO2 ǁ [11-20]Al2O3 (in-plane) is established through the measurement of in-plane and out-of-plane microstructural characterization. Overall, this work presents a reliable method for the low temperature growth of epitaxial VO2 thin films with good environmental stability and excellent semiconductor–metal switching performance.


  • Open Access

    Ab Initio Electronic and Thermoelectric Calculations of Atomically Thick Nanofilms

    by Rajnarayan De, Swarupananda Pradhan

    A comparative investigation on electronic and thermoelectric (TE) properties of Sb2Te3, Bi2Se3, BiSbSe3, and BiSbTe3 monolayers is carried out using first principle calculation and Boltzmann transport theory. The density functional theory calculations are performed by adopting Perdew–Burke–Ernzerhof (for solids) generalized gradient approximation (GGA‐PBEsol) as exchange‐correlation functional. The calculation of electronic properties of the atomically thick materials reveals all to be of indirect bandgap type with BiSbSe3 and BiSbTe3 having narrowest and widest bandgaps, respectively. All the monolayers show Mexican hat dispersion in the valence bands. The phonon dispersion confirms the dynamic stability of the monolayers. Further examination of electronic properties is carried out by calculating total and partial density of states. The TE properties of these 1‐quintuple (QL) layer materials are calculated using semi‐classical Boltzmann transport theory and rigid band approximation together with the electronic properties derived from first principles. The Sb2Te3 QL shows highest power factor (relative to relaxation time) of 3.1 × 1011 WK−2 m−1 s−1 among others. The figure of merit (ZT) of these TE materials is also calculated with a highest value of 0.99 obtained for Sb2Te3 monolayer. The BiSbSe3 monolayer lacks behind in giving good TE performance due to dominating bipolar conduction effect.

  • In-situ optimization of lateral film uniformity in PVD system by using Fiber Bragg grating temperature sensors

    by S Maidul Haque, S D V S Jagannadha Raju, Avijit Kumar, B Karthik Goud, Sanjay Rai, Rajnarayan De, C Prathap, K Divakar Rao

    Fiber Bragg grating (FBG) based temperature sensing method has been employed in this work for measuring the lateral temperature distribution on substrate plane during pulse DC magnetron sputtering deposition for optimization of lateral film uniformity. The evolution of temperature distribution with the variation of important process parameters like pulse width (496–1616 ns), deposition pressure (3.1 × 10−3–1.9 × 10–2 mbar) and sputtering power (25–250 W) have been measured over 40 mm radial distance on glass substrate horizon. To investigate the effect of substrate height on the temperature distribution, the later has been measured at two different substrate heights (60 mm and 90 mm) for varying sputtering power. Finally, the effect of variation in temperature distribution on uniformity of thickness and optical, morphological and structural properties have been investigated by separately depositing two HfO2 thin films at two representative extreme deposition powers (75 W and 200 W). The correlation of film non-uniformity of the above properties with the temperature distribution suggests that FBG based multipoint temperature sensing can be possibly used as an indicative tool for in situ optimization of the lateral film uniformity. In addition, the fast response and workability in plasma environment of FBG sensors enables precise in situ mapping of temperature distribution in sputtering process.

  • Spatially selective narrow band and broadband absorption in Ag/SiO2/Ag based trilayer thin films by oblique angle deposition of SiO2 layer

    by Chinmaya Kar, Rajnarayan De, Shuvendu Jena, S Bhakta, P K Sahoo, S Pradhan, K Divakar Rao, Dinesh V Udupa

    We have experimentally demonstrated spatially selective absorption in Ag-SiO2-Ag based trilayer thin films by tuning the deposition angle of SiO2 layer. These structures generate cavity resonance which can be tuned across the substrate locations due to spatially selective thickness and refractive index of silicon oxide (SiO2) film sandwiched between metallic silver (Ag) mirrors. Spatially selective property of SiO2 film is obtained by oblique angle deposition technique using an electron beam evaporation system. The resonance wavelength of absorption in this trilayer structure shifts across the substrate locations along the direction of oblique deposition. The extent of shift in resonance increases with increase in angle of deposition of SiO2 layer. 4.14 nm mm−1 average shift of resonance wavelength is observed when SiO2 is deposited at 40° whereas 4.76 nm mm−1 average shift is observed when SiO2 is deposited at 60°. We observed that the width of resonance increases with angle of deposition of the cavity layer and ultimately the resonant absorption disappears and becomes broadband when SiO2 is deposited at glancing angle deposition (GLAD) configuration. Our study reveals that there is a suitable range of oblique angle of deposition from 40° to 60° for higher spatial tunability and resonant absorption whereas the absorption becomes broadband for glancing angle deposition.

  • Influence of in-situ substrate temperature on anisotropic behaviour of glancing angle grown nickel nanocolumns

    by Rajnarayan De, S. Augustine, B. Das, M. K. Sikdar, M. Ranjan, P. K. Sahoo, S. Maidul Haque, C. Prathap, K. Divakar Rao


  • Effect of Postdeposition Heat Treatment on the Nanoplasmonic Behavior of Glancing Angle‐Deposited Silver Nanostructures

    by Rajnarayan De, Bujagouni Karthik Goud, Chinmaya Kar, Sk Maidul Haque, Anil Krishna Debnath, Mrinal Kanti Sikdar, Pratap Kumar Sahoo, Kompalli Divakar Rao

    Postdeposition heat treatment‐induced modifications of nanoplasmonic response in glancing angle‐deposited (GLAD) Ag nanostructures are systematically investigated. The as‐deposited GLAD Ag thin films are annealed at various temperatures namely 200, 250, 300, and 350 °C in air atmosphere. The reduction in localized surface plasmon resonance (LSPR) absorption peak width is detected with annealing. Morphological characterization of the as‐deposited and annealed films reveals reduction in grain size and shape distributions responsible for narrowing of the LSPR peak width. The refractive index sensitivities of the as‐deposited and annealed films are measured using an in‐house‐developed optical setup and figure of merit (FOM) of the sensors is also estimated. An increase in FOM of the sensors is observed upon annealing while sensitivity is found to be reduced. E‐field profile surrounding the Ag nanoparticles is also simulated to explain the experimental observations on refractive index sensitivity of the films.

  • Open Access

    Effect of Post Deposition Heat Treatment on the Nanoplasmonic Behaviour of Glancing Angle Deposited Silver Nanostructures

    by Rajnarayan De, B. Karthik Goud, C. Kar, S. Maidul Haque, A Debnath, Mrinal K. Sikdar, Pratap Kumar Sahoo, K. Divakar Rao

    Post deposition heat treatment induced modifications in nanoplasmonic response in glancing angle deposited (GLAD) Ag nanostructures were systematically investigated. The as deposited GLAD Ag thin films were annealed at various temperatures viz. 200°C, 250°C, 300°C, 350°C and 400°C in air atmosphere. The reduction in localized surface plasmon resonance (LSPR) absorption peak width was detected with annealing. Morphological characterization of the as deposited and annealed films revealed reduction in grain size and shape distributions responsible for narrowing of the LSPR peak width. The refractive index sensitivities of the as deposited and annealed films were measured using an in-house developed optical setup and figure of merit (FOM) of the sensors were also estimated. An increase in FOM of the sensors was observed upon annealing while sensitivity was found to be reduced. E-field profile surrounding the Ag nanoparticles was also simulated to explain the experimental observations on refractive index sensitivity of the films.

  • Spatially selective nanoplasmonic response in Ag embedded GLAD TiO2 nanocomposite thin films

    by Rajnarayan De, S. Maidul Haque, M.K. Sikdar, P.K. Sahoo, S. Kesari, Ch Kishan Singh, S. Augustine, M. Ranjan, R. Rao, K. Divakar Rao


  • E‐Beam Evaporation of Silicon: Native Oxidation and Quasicontinuous Tailoring of Optical Properties

    by S. Maidul Haque, Rajnarayan De, C. Prathap, S. K. Srivastava, K. Divakar Rao

    An experimental study of native oxidation of silicon during electron beam evaporation is carried out. A set of SiOx thin films is prepared at varying e‐beam current (50–300 mA) without inflow of oxygen gas from external supply. The O:Si stoichiometry ratio of grown SiOx films, as estimated through X‐ray photoelectron spectroscopy (XPS) measurement, is found to be mainly governed by the deposition rate. Optical analysis using transmission spectrophotometry and spectroscopic ellipsometry measurements reveal gradual variation of refractive index (1.58–4.09@650 nm) and bandgap (3.65–1.90 eV) of grown films with the increase in e‐beam current. Such high contrast changes in Si‐based optical materials just by variations of e‐beam current are not reported previously. Deposition rate‐dependent oxidation and optical constants are confirmed by investigating two separate films at lower substrate heights. Finally, utilizing the quasicontinuous variation of optical constants of SiOx films, antireflection (AR) coating is designed and experimentally demonstrated on Si wafer and achieved reflectance loss of ≈2.7% in wavelength range of 400–900 nm. The native oxidation under varying e‐beam current is envisaged to be an effective and a facile method for preparing quasicontinuously tunable silicon‐based optical materials.


  • CW laser damage study in Ag/TiO2 bilayer thin films: Role of interfacially diffused plasmonic silver nanoparticles

    by S. Maidul Haque, Rajnarayan De, C. Prathap, Sanjiv Kumar, G.L.N. Reddy, Shobhna Mishra, K. Divakar Rao