František Šimko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
František Šimko has a total of 123 co-authors. Here are the top co-authors by number of shared publications:
- Aydar Rakhmatullin
Conditions Extrêmes et Matériaux: Haute Température et Irradiation, CEMHTI, UPR 3079-CNRS Univ. Orléans, 45071 Orléans, France
15 shared publications Michal Korenko
Centre of Excellence for Advanced Materials Application ‐ CEMEA Slovak Academy of Sciences 845 11 Bratislava Slovakia
9 shared publications- Miroslav Boča
Institute of Inorganic Chemistry, Slovak Academy of Sciences, Dúbravská cesta 9, SK-845 36 Bratislava, Slovakia
8 shared publications Catherine Bessada
Conditions Extrêmes et Matériaux: Haute Température et Irradiation, CEMHTI, UPR 3079─CNRS Univ. Orléans
7 shared publications- Catherine Bessada
CNRS, CEMHTI UPR3079, Univ. Orléans, F-45071 Orléans, France
6 shared publications - Zuzana Netriová
Institute of Inorganic Chemistry, Slovak Academy of Sciences, Dúbravská cesta 9, 845 36 Bratislava, Slovakia
5 shared publications
Latest Publications
- 6 February 2026
- Published by American Chemical Society (ACS) in Journal of Chemical & Engineering Data
- Vol. 71 (3) , 1139-1149
NdF 3 and Nd 2 O 3 Effect on the Physicochemical and Volume Properties of Cryolite-Based Melts and the NaF + NdF 3 Systems
- 6 February 2026
- Published by American Chemical Society (ACS) in Journal of Chemical & Engineering Data
- Vol. 71 (3) , 1139-1149
NdF 3 and Nd 2 O 3 Effect on the Physicochemical and Volume Properties of Cryolite-Based Melts and the NaF + NdF 3 Systems
- 4 February 2025
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 25 (4) , 1217-1223
Crystal Structures of Three Polymorphs of Cs3ScF6 by Means of Solid-State NMR, X-Ray, and Neutron Diffraction
- 4 February 2025
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 25 (4) , 1217-1223
Crystal Structures of Three Polymorphs of Cs3ScF6 by Means of Solid-State NMR, X-Ray, and Neutron Diffraction
- 9 September 2024
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 24 (18) , 7494-7503
Determination of the Na3AlF6–Y2O3 Phase Diagram and Its Implications for Low-Temperature YAG/Nd:YAG Synthesis
- 9 September 2024
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 24 (18) , 7494-7503
Determination of the Na3AlF6–Y2O3 Phase Diagram and Its Implications for Low-Temperature YAG/Nd:YAG Synthesis
- Open Access
- 25 April 2024
- Published by Wiley in Rare Metals
- Vol. 43 (7) , 3356-3369
Structural correlation and chemistry of molten NaF–ScF 3 with dissolved metal aluminium: TG/DTA, XRD, NMR and molecular dynamics simulations
For the first time, the mechanism of metal aluminum dissolution in NaF–ScF 3 eutectic melts and the chemical interaction between the constituents of this mixture have been thoroughly studied by a combination of differential thermal analysis (DTA), high temperature and solid‐state nuclear magnetic resonance (NMR), and X‐ray diffraction (XRD) coupled with the molecular dynamic simulations. The formation of an insoluble Al 3 Sc alloy in molten (NaF–ScF 3 ) eut system was proven, and the chemical mechanism of this aluminothermic Al 3 Sc alloy production was elucidated. Corresponding ex situ examinations bring to light the formation of NaScF 4 and solid solution of Na 3 (Al,Sc)F 6 in cooled bath. The molecular dynamics calculations of the bath allow us to construct the structural model and to predict viscosity, density and electrical conductivity of the reagent melt to help to optimize the conditions of the alloy synthesis.
- 25 April 2024
- Published by Wiley in Rare Metals
- Vol. 43 (7) , 3356-3369
Open AccessStructural correlation and chemistry of molten NaF–ScF 3 with dissolved metal aluminium: TG/DTA, XRD, NMR and molecular dynamics simulations
For the first time, the mechanism of metal aluminum dissolution in NaF–ScF 3 eutectic melts and the chemical interaction between the constituents of this mixture have been thoroughly studied by a combination of differential thermal analysis (DTA), high temperature and solid‐state nuclear magnetic resonance (NMR), and X‐ray diffraction (XRD) coupled with the molecular dynamic simulations. The formation of an insoluble Al 3 Sc alloy in molten (NaF–ScF 3 ) eut system was proven, and the chemical mechanism of this aluminothermic Al 3 Sc alloy production was elucidated. Corresponding ex situ examinations bring to light the formation of NaScF 4 and solid solution of Na 3 (Al,Sc)F 6 in cooled bath. The molecular dynamics calculations of the bath allow us to construct the structural model and to predict viscosity, density and electrical conductivity of the reagent melt to help to optimize the conditions of the alloy synthesis.
- Open Access
- 11 October 2023
- Published by Springer Nature in Ionics
- Vol. 29 (12) , 5139-5146
Ionic conductivity of the molten systems (LiF–CaF2)eut–NdF3, (LiF–NaF)eut–NdF3, (NaF–CaF2)eut–NdF3 and (LiF–MgF2)eut–NdF3
Experimental measurements were made to assess the electrical conductivity as a function of temperature and NdF3 concentration (0–20 mol %) of molten systems of (LiF–CaF2)eut–NdF3, (LiF–NaF)eut–NdF3, (NaF–CaF2)eut–NdF3 and (LiF–MgF2)eut–NdF3. The experiment used an altering current impedance spectroscopy technique with a platinum–rhodium electrode positioned in a pyrolytic BN tube and graphite a crucible/counter electrode. The conductivity of all systems under study increased with rising temperatures and decreasing NdF3 concentrations. The Arrhenius equation and linear regression have both been used to describe the experimental data. The results of the ionic conductivity for the temperature 850 °C and NdF3 concentrations 0, 10 and 15 mol %, respectively, can be compared as follows: the conductivity of the molten system of (LiF–CaF2)eut–NdF3 was determined to be 6.10, 5.95 and 5.10 S.cm−1, the results for the system (LiF–NaF)eut–NdF3 were 6.16, 5.56 and 4.13 S.cm−1, the results for the system (NaF–CaF2)eut–NdF3 were 3.78, 3.56 and 2.32 S.cm−1, and finally, the results for the system (LiF–MgF2)eut–NdF3 were determined to be for the same temperature as 5.35, 4.79 and 4.14 S.cm−1, respectively.
- 11 October 2023
- Published by Springer Nature in Ionics
- Vol. 29 (12) , 5139-5146
Open AccessIonic conductivity of the molten systems (LiF–CaF2)eut–NdF3, (LiF–NaF)eut–NdF3, (NaF–CaF2)eut–NdF3 and (LiF–MgF2)eut–NdF3
Experimental measurements were made to assess the electrical conductivity as a function of temperature and NdF3 concentration (0–20 mol %) of molten systems of (LiF–CaF2)eut–NdF3, (LiF–NaF)eut–NdF3, (NaF–CaF2)eut–NdF3 and (LiF–MgF2)eut–NdF3. The experiment used an altering current impedance spectroscopy technique with a platinum–rhodium electrode positioned in a pyrolytic BN tube and graphite a crucible/counter electrode. The conductivity of all systems under study increased with rising temperatures and decreasing NdF3 concentrations. The Arrhenius equation and linear regression have both been used to describe the experimental data. The results of the ionic conductivity for the temperature 850 °C and NdF3 concentrations 0, 10 and 15 mol %, respectively, can be compared as follows: the conductivity of the molten system of (LiF–CaF2)eut–NdF3 was determined to be 6.10, 5.95 and 5.10 S.cm−1, the results for the system (LiF–NaF)eut–NdF3 were 6.16, 5.56 and 4.13 S.cm−1, the results for the system (NaF–CaF2)eut–NdF3 were 3.78, 3.56 and 2.32 S.cm−1, and finally, the results for the system (LiF–MgF2)eut–NdF3 were determined to be for the same temperature as 5.35, 4.79 and 4.14 S.cm−1, respectively.
- 12 September 2023
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 62 (38) , 15651-15663
Cesium Oxo-fluoro-aluminates in the CsF–Al2O3 System: Synthesis and Structural Characterization
In an experiment combining various approaches, a precise examination of a portion of the phase diagram of a CsF-Al2O3 system was carried out up to 40 mol% Al2O3. CsF-Al2O3 solidified mixtures have been investigated using high-field solid-state NMR (Cs-133, Al-27, and F-19) spectroscopy and X-ray powder diffraction over a broad range of compositions with synchrotron powder diffraction and Rietveld analysis. A new cesium oxo-fluoro-aluminate, Cs(2)Al(2)O(3)F2, was discovered, prepared, and structurally analyzed by synchrotron diffraction analysis. In addition to Cs2Al2O3F2, we have synthesized the following pure compounds in order to aid in the interpretation of NMR spectra of the solidified samples: CsAlF4, Cs3AlF6, and CsAlO2.
- 12 September 2023
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 62 (38) , 15651-15663
Cesium Oxo-fluoro-aluminates in the CsF–Al2O3 System: Synthesis and Structural Characterization
In an experiment combining various approaches, a precise examination of a portion of the phase diagram of a CsF-Al2O3 system was carried out up to 40 mol% Al2O3. CsF-Al2O3 solidified mixtures have been investigated using high-field solid-state NMR (Cs-133, Al-27, and F-19) spectroscopy and X-ray powder diffraction over a broad range of compositions with synchrotron powder diffraction and Rietveld analysis. A new cesium oxo-fluoro-aluminate, Cs(2)Al(2)O(3)F2, was discovered, prepared, and structurally analyzed by synchrotron diffraction analysis. In addition to Cs2Al2O3F2, we have synthesized the following pure compounds in order to aid in the interpretation of NMR spectra of the solidified samples: CsAlF4, Cs3AlF6, and CsAlO2.
- 2 March 2023
- Published by Elsevier in Journal of the European Ceramic Society
- Vol. 43 (9) , 3931-3940
High temperature corrosion resistance of electrically conductive nitrogen doped silicon carbide ceramics in molten fluorides
- 2 March 2023
- Published by Elsevier in Journal of the European Ceramic Society
- Vol. 43 (9) , 3931-3940
High temperature corrosion resistance of electrically conductive nitrogen doped silicon carbide ceramics in molten fluorides
- 7 April 2021
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 60 (8) , 6016-6026
Polymorphs of Rb3ScF6: X-ray and Neutron Diffraction, Solid-State NMR, and Density Functional Theory Calculations Study
The crystal structures of three polymorphs of Rb3ScF6 have been determined through a combination of synchrotron, laboratory X-ray, and neutron powder diffraction, electron diffraction, and multinuclear high-field solid-state NMR studies. The room temperature (RT; α) and medium-temperature (β) structures are tetragonal, with space groups I41/a (Z = 80) and I4/m (Z = 10) and lattice parameters a = 20.2561(4) Å, c = 36.5160(0) Å and a = 14.4093(2) Å, c = 9.2015(1) Å at RT and 187 °C, respectively. The high-temperature (γ) structure is cubic space group Fm3̅m (Z = 4) with a = 9.1944(1) Å at 250 °C. The temperatures of the phase transitions were measured at 141 and 201 °C. The three α, β, and γ Rb3ScF6 phases are isostructural with the α, β, and δ forms of the potassium cryolite. Detailed structural characterizations were performed by density functional theory as well as NMR. In the case of the β polymorph, the dynamic rotations of the ScF6 octahedra of both Sc crystallographic sites have been detailed.
- 7 April 2021
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 60 (8) , 6016-6026
Polymorphs of Rb3ScF6: X-ray and Neutron Diffraction, Solid-State NMR, and Density Functional Theory Calculations Study
The crystal structures of three polymorphs of Rb3ScF6 have been determined through a combination of synchrotron, laboratory X-ray, and neutron powder diffraction, electron diffraction, and multinuclear high-field solid-state NMR studies. The room temperature (RT; α) and medium-temperature (β) structures are tetragonal, with space groups I41/a (Z = 80) and I4/m (Z = 10) and lattice parameters a = 20.2561(4) Å, c = 36.5160(0) Å and a = 14.4093(2) Å, c = 9.2015(1) Å at RT and 187 °C, respectively. The high-temperature (γ) structure is cubic space group Fm3̅m (Z = 4) with a = 9.1944(1) Å at 250 °C. The temperatures of the phase transitions were measured at 141 and 201 °C. The three α, β, and γ Rb3ScF6 phases are isostructural with the α, β, and δ forms of the potassium cryolite. Detailed structural characterizations were performed by density functional theory as well as NMR. In the case of the β polymorph, the dynamic rotations of the ScF6 octahedra of both Sc crystallographic sites have been detailed.
- 14 April 2020
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 59 (9) , 6308-6318
X-ray Diffraction, NMR Studies, and DFT Calculations of the Room and High Temperature Structures of Rubidium Cryolite, Rb3AlF6
A crystallographic approach incorporating multinuclear high field solid state NMR (SSNMR), X-ray structure determinations, TEM observation, and density functional theory (DFT) was used to characterize two polymorphs of rubidium cryolite, Rb3AlF6. The room temperature phase was found to be ordered and crystallizes in the Fddd (no. 70) space group with a = 37.26491(1) Å, b = 12.45405(4) Å, and c = 17.68341(6) Å. Comparison of NMR measurements and computational results revealed the dynamic rotations of the AlF6 octahedra. Using in situ variable temperature MAS NMR measurements, the chemical exchange between rubidium sites was observed. The β-phase, i.e., high temperature polymorph, adopts the ideal cubic double-perovskite structure, space group Fm3m, with a = 8.9930(2) Å at 600 °C. Additionally, a series of polymorphs of K3AlF6 has been further characterized by high field high temperature SSNMR and DFT computation.
- 14 April 2020
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 59 (9) , 6308-6318
X-ray Diffraction, NMR Studies, and DFT Calculations of the Room and High Temperature Structures of Rubidium Cryolite, Rb3AlF6
A crystallographic approach incorporating multinuclear high field solid state NMR (SSNMR), X-ray structure determinations, TEM observation, and density functional theory (DFT) was used to characterize two polymorphs of rubidium cryolite, Rb3AlF6. The room temperature phase was found to be ordered and crystallizes in the Fddd (no. 70) space group with a = 37.26491(1) Å, b = 12.45405(4) Å, and c = 17.68341(6) Å. Comparison of NMR measurements and computational results revealed the dynamic rotations of the AlF6 octahedra. Using in situ variable temperature MAS NMR measurements, the chemical exchange between rubidium sites was observed. The β-phase, i.e., high temperature polymorph, adopts the ideal cubic double-perovskite structure, space group Fm3m, with a = 8.9930(2) Å at 600 °C. Additionally, a series of polymorphs of K3AlF6 has been further characterized by high field high temperature SSNMR and DFT computation.
- 10 April 2020
- Published by American Chemical Society (ACS) in Journal of Chemical & Engineering Data
- Vol. 65 (5) , 2642-2648
Effect of the Alkaline Metal Cations on the Electrical Conductivity of the Molten Cryolites (K3AlF6, Rb3AlF6, and Cs3AlF6)
- 10 April 2020
- Published by American Chemical Society (ACS) in Journal of Chemical & Engineering Data
- Vol. 65 (5) , 2642-2648
Effect of the Alkaline Metal Cations on the Electrical Conductivity of the Molten Cryolites (K3AlF6, Rb3AlF6, and Cs3AlF6)