Ana Isabel Palmero Marrero

This study investigates the implementation of passive design strategies to improve the thermal environment in the extremely hot climates of Brazil, Portugal, and Turkey. Given the rising cooling demands due to climate change, optimizing energy efficiency in buildings is essential. Using the Trace 3D Plus v6.00.106 software, typical residential buildings for each country were simulated to assess various passive solutions, such as building orientation, wall and roof modifications, glazing optimization options, window-to-wall ratio (WTWR) reduction, shading, and natural ventilation. The findings highlight that Brazil experienced the higher discomfort temperatures compared to Mediterranean climates, with indoor air temperatures exceeding 28 °C all year round and remaining between 34 °C and 37 °C for nearly 40% of the time. Building orientation had a minimal impact near the equator, while Mediterranean climates benefited from an up to 10% variation in energy demand. Thermal insulation combined with white exterior paint resulted in Şanlıurfa experiencing annual energy savings of up to 26%. Optimal roof solutions yielded a 19% demand reduction in Évora, while WTWR reduction and double-colored glazing achieved up to a 35% reduction in Évora and 19% in other regions. Combined strategies achieved energy demand reductions of 44% for Évora, 40% for Şanlıurfa, and 32% for Teresina. The study emphasizes the need for integrated, climate-specific passive solutions, showing their potential to enhance both energy efficiency and the thermal environment in residential buildings across diverse hot climates.

Building integrated photovoltaics (BIPVs) consist of PV panels that are integrated into a building as part of its construction. This technology has advantages such as the production of electricity without necessitating additional land area. This paper provides a literature review on recent developments in urban building energy modelling, including tools and methods as well as how they can be used to predict the effect of PV systems on building outdoor and indoor environments. It is also intended to provide a critical analysis on how PV systems affect the urban environment, both from an energy and a comfort point of view. The microclimate, namely the urban heat island concept, is introduced and related to the existence of PV systems. It is concluded that urban building energy models (UBEMs) can be effective in studying the performance of PV systems in the urban environment. It allows one to simultaneously predict building energy performance and microclimate effects. However, there is a need to develop new methodologies to overcome the challenges associated with UBEMs, especially those concerning non-geometric data, which lead to a major source of errors, and to find an effective method to predict the effect of PV systems in the urban environment.

In this paper, the experimental results of the thermal sub-system of a reliable and cost-effective polygeneration solar system are presented. This polygeneration system produces heating, cooling, and electricity from solar energy, which is used in an existing test building. Heat is generated in four evacuated tube solar collectors (ETCs). The heat may be used for space cooling through a variable geometry ejector (VGE) heat pump. In order to reduce the mismatches between generation and consumption, two thermal storage tanks were added. The performance of a new thermal storage, with 400 L, able to store both sensible and latent heat, was tested. The heating performances of the test building were assessed. Ejector cycle tests were also performed, and the variation of the cooling coefficient of performance (COP) was calculated for different flow rates. For heating, the results showed that the heat storage was capable of heating the test building for 8 h, with temperatures between 22 °C and 26 °C. All results showed that this polygeneration prototype could be capable of meeting the heating and cooling needs when applied to a real building.

This research aims to optimize and compare the annual costs of energy services in buildings with critical loads and analyze case studies for hospitals and higher education institutions in the United States. Besides electricity and natural gas costs, the study considers all the infrastructure costs of capital amortization and maintenance. In addition, it studies energy resilience improvement due to distributed generation, including solar photovoltaic, solar thermal, internal combustion engine, and fuel cell sources. The optimization considers the electrical consumption, the heating and cooling demands, and the operational strategy of the energy storage systems. To simulate real scenarios, energy tariffs were modeled and considered, and final optimization results were produced. Some of the microgrid load was considered critical to model resilience benefits. The results show that if favorable energy tariffs are applied, the benefits of increasing energy resilience represent a novel market with high potential in facilities with significant critical loads. This methodology can be used in similar scenarios, adapting each particular load profile and critical load to provide a combined optimal solution regarding resilience and economic benefits.

In this paper, the experimental results of the thermal sub-system of a reliable and cost-effective polygeneration solar system are presented. This polygeneration system produces heating, cooling and electricity from solar energy, which are used in an existing test-building. Heat is generated in four evacuated tube solar collectors (ETC). The heat may be used for space cooling, through a variable geometry ejector (VGE) heat pump. In order to reduce the mismatches between generation and consumption, two thermal storage tanks were added. The performance of a new thermal storage, with 400 l, able to storage both sensible and latent heat, was tested. Heating performances of the test-building were assessed. Ejector cycle tests were also performed.