Toni Dobsak
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Toni Dobsak has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Reinhard Gruber
Department of Oral Biology, University Clinic of Dentistry, Medical University of Vienna, 1090 Vienna, Austria
5 shared publications - Stefan Tangl
Karl Donath Laboratory for Hard Tissue and Biomaterial Research, University Clinic of Dentistry, Medical University of Vienna, 1090 Vienna, Austria
4 shared publications Patrick Heimel
Medical University of Vienna
3 shared publications- Ulrike Kuchler
Department of Oral Surgery, University Clinic of Dentistry, Medical University of Vienna, Sensengasse 2a, 1090 Vienna, Austria
3 shared publications - Uwe Yacine Schwarze
Department of Orthopedics and Traumatology, Medical University of Graz, 8036 Graz, Austria
3 shared publications - Lena Hirtler
Center for Anatomy and Cell Biology, Division of Anatomy, Medical University of Vienna, Vienna, Austria
2 shared publications
Latest Publications
- Open Access
Sexual Dimorphism of the Lateral Angle of the Petrous Bone in Children: Growth Patterns and the Influence of Cranial Width
Background: The lateral angle of the internal acoustic meatus of the petrous bone is a sexually dimorphic feature used for sex determination, particularly in fragmented or cremated remains. However, studies show conflicting results regarding its accuracy, and the reasons for its dimorphism remain unclear. The aim of this study is to analyze sexual dimorphism in subadult individuals and to examine the association of the lateral angle with cranial breadth as an explanation for its sexual dimorphism, as well as interpopulation differences. Methods: We measured the lateral angle and biauricular breadth in 204 individuals (birth to 30 years) using CT scans from Austrian 19th-century anatomical collections and data from the New Mexico Decedent Image Database. Results: This study revealed that the sexual dimorphism of the lateral angle and cranial dimensions manifests during puberty, along with a strong association between the lateral angle and the biauricular breadth. Additionally, this study noted interpopulation variability in cranial breadth, with different levels of sexual dimorphism observed across diverse populations. Conclusions: The findings offer a potential explanation for the observed variability in lateral angle measurements across studies and the limitations of universal cut-off points as a sex-determination method in osteology.
Open AccessSexual Dimorphism of the Lateral Angle of the Petrous Bone in Children: Growth Patterns and the Influence of Cranial Width
Background: The lateral angle of the internal acoustic meatus of the petrous bone is a sexually dimorphic feature used for sex determination, particularly in fragmented or cremated remains. However, studies show conflicting results regarding its accuracy, and the reasons for its dimorphism remain unclear. The aim of this study is to analyze sexual dimorphism in subadult individuals and to examine the association of the lateral angle with cranial breadth as an explanation for its sexual dimorphism, as well as interpopulation differences. Methods: We measured the lateral angle and biauricular breadth in 204 individuals (birth to 30 years) using CT scans from Austrian 19th-century anatomical collections and data from the New Mexico Decedent Image Database. Results: This study revealed that the sexual dimorphism of the lateral angle and cranial dimensions manifests during puberty, along with a strong association between the lateral angle and the biauricular breadth. Additionally, this study noted interpopulation variability in cranial breadth, with different levels of sexual dimorphism observed across diverse populations. Conclusions: The findings offer a potential explanation for the observed variability in lateral angle measurements across studies and the limitations of universal cut-off points as a sex-determination method in osteology.
- Open Access
- 14 November 2021
- Published by Springer Nature in Stem Cell Research & Therapy
- Vol. 12 (1) , 1-17
Bone regeneration in rat calvarial defects using dissociated or spheroid mesenchymal stromal cells in scaffold-hydrogel constructs
Background: Three-dimensional (3D) spheroid culture can promote the osteogenic differentiation of bone marrow mesenchymal stromal cells (BMSC). 3D printing offers the possibility to produce customized scaffolds for complex bone defects. The aim of this study was to compare the potential of human BMSC cultured as 2D monolayers or 3D spheroids encapsulated in constructs of 3D-printed poly-L-lactide-co-trimethylene carbonate scaffolds and modified human platelet lysate hydrogels (PLATMC-HPLG) for bone regeneration. Methods: PLATMC-HPLG constructs with 2D or 3D BMSC were assessed for osteogenic differentiation based on gene expression and in vitro mineralization. Subsequently, PLATMC-HPLG constructs with 2D or 3D BMSC were implanted in rat calvarial defects for 12 weeks; cell-free constructs served as controls. Bone regeneration was assessed via in vivo computed tomography (CT), ex vivo micro-CT and histology. Results: Osteogenic gene expression was significantly enhanced in 3D versus 2D BMSC prior to, but not after, encapsulation in PLATMC-HPLG constructs. A trend for greater in vitro mineralization was observed in constructs with 3D versus 2D BMSC (p > 0.05). In vivo CT revealed comparable bone formation after 4, 8 and 12 weeks in all groups. After 12 weeks, micro-CT revealed substantial regeneration in 2D BMSC (62.47 ± 19.46%), 3D BMSC (51.01 ± 24.43%) and cell-free PLATMC-HPLG constructs (43.20 ± 30.09%) (p > 0.05). A similar trend was observed in the histological analysis. Conclusion: Despite a trend for superior in vitro mineralization, constructs with 3D and 2D BMSC performed similarly in vivo. Regardless of monolayer or spheroid cell culture, PLATMC-HPLG constructs represent promising scaffolds for bone tissue engineering applications.
- 14 November 2021
- Published by Springer Nature in Stem Cell Research & Therapy
- Vol. 12 (1) , 1-17
Open AccessBone regeneration in rat calvarial defects using dissociated or spheroid mesenchymal stromal cells in scaffold-hydrogel constructs
Background: Three-dimensional (3D) spheroid culture can promote the osteogenic differentiation of bone marrow mesenchymal stromal cells (BMSC). 3D printing offers the possibility to produce customized scaffolds for complex bone defects. The aim of this study was to compare the potential of human BMSC cultured as 2D monolayers or 3D spheroids encapsulated in constructs of 3D-printed poly-L-lactide-co-trimethylene carbonate scaffolds and modified human platelet lysate hydrogels (PLATMC-HPLG) for bone regeneration. Methods: PLATMC-HPLG constructs with 2D or 3D BMSC were assessed for osteogenic differentiation based on gene expression and in vitro mineralization. Subsequently, PLATMC-HPLG constructs with 2D or 3D BMSC were implanted in rat calvarial defects for 12 weeks; cell-free constructs served as controls. Bone regeneration was assessed via in vivo computed tomography (CT), ex vivo micro-CT and histology. Results: Osteogenic gene expression was significantly enhanced in 3D versus 2D BMSC prior to, but not after, encapsulation in PLATMC-HPLG constructs. A trend for greater in vitro mineralization was observed in constructs with 3D versus 2D BMSC (p > 0.05). In vivo CT revealed comparable bone formation after 4, 8 and 12 weeks in all groups. After 12 weeks, micro-CT revealed substantial regeneration in 2D BMSC (62.47 ± 19.46%), 3D BMSC (51.01 ± 24.43%) and cell-free PLATMC-HPLG constructs (43.20 ± 30.09%) (p > 0.05). A similar trend was observed in the histological analysis. Conclusion: Despite a trend for superior in vitro mineralization, constructs with 3D and 2D BMSC performed similarly in vivo. Regardless of monolayer or spheroid cell culture, PLATMC-HPLG constructs represent promising scaffolds for bone tissue engineering applications.
- 17 November 2017
- Published by Wiley in Journal of Clinical Periodontology
- Vol. 44 (12) , 1226-1235
Impaired periodontium and temporomandibular joints in tumour necrosis factor‐α transgenic mice
Aim: Tumour necrosis factor (TNF)‐α is a pathological factor causing the characteristic symptoms of periodontal disease and rheumatoid arthritis. In this study, we describe the phenotypes of human TNF‐α transgenic mice (hTNFtg) with respect to their periodontium and the temporomandibular joint (TMJ).Material and methods: Periodontal structures, TMJ and skull shape of hTNFtg mice and wild‐type (WT) littermates were assessed by microcomputed tomography, automated segmentation, geometric morphometrics and histologic ground sections.Results: We show that hTNFtg mice have an eroded lamina dura and reduced periodontal ligament space compared to (WT) littermates. Transgenic mice further exhibit severe destruction of the TMJ. Geometric morphometrics revealed that hTNFtg mice have a more laterally positioned TMJ with a concomitantly enlarged zygomatic process. Mandibular and maxillary teeth occluded properly.Conclusions: Our findings suggest that chronic inflammation in hTNFtg mice causes destructive changes of the periodontium and the TMJ.
- 17 November 2017
- Published by Wiley in Journal of Clinical Periodontology
- Vol. 44 (12) , 1226-1235
Impaired periodontium and temporomandibular joints in tumour necrosis factor‐α transgenic mice
Aim: Tumour necrosis factor (TNF)‐α is a pathological factor causing the characteristic symptoms of periodontal disease and rheumatoid arthritis. In this study, we describe the phenotypes of human TNF‐α transgenic mice (hTNFtg) with respect to their periodontium and the temporomandibular joint (TMJ).Material and methods: Periodontal structures, TMJ and skull shape of hTNFtg mice and wild‐type (WT) littermates were assessed by microcomputed tomography, automated segmentation, geometric morphometrics and histologic ground sections.Results: We show that hTNFtg mice have an eroded lamina dura and reduced periodontal ligament space compared to (WT) littermates. Transgenic mice further exhibit severe destruction of the TMJ. Geometric morphometrics revealed that hTNFtg mice have a more laterally positioned TMJ with a concomitantly enlarged zygomatic process. Mandibular and maxillary teeth occluded properly.Conclusions: Our findings suggest that chronic inflammation in hTNFtg mice causes destructive changes of the periodontium and the TMJ.
- 21 April 2016
- Published by Bioscientifica in Bone Abstracts
Geometric morphometrics: a mathematical tool to compare morphological traits based onSOSTdysfunction in mice
Introduction: Genetic disorders are usually characterised by subjective morphological traits. Mouse models should represent the human situation but it is difficult to translate morphology traits from one species to another. Thus, there is a demand to objectively assess morphological traits. Geometric morphometrics is a mathematical tool to evaluate morphology based on normalised three-dimensional coordinates. Here we use geometric morphometrics to compare the morphology of SOST knockout (SOST KO) mice with respective wild type (WT) mice and relate the symptoms to human sclerosteosis. Materials and Methods: We analysed the morphological differences between six mice skulls lacking sclerostin and six respective wild type controls (ethically approved). A total of 27 landmark coordinates per skull were obtained based on microcomputed tomography surfaces. Generalized Procrustes analysis superimposes the skull shapes, allowing computing and visualizing morphological dissimilarities and size. Statistical evaluation of morphological differences was done by principal component analysis. We further computed the asymmetry by reflected relabelling and calculated the mandibular prognathism by comparison of distances. Results: Generalized Procrustes analysis revealed that SOST KO mice have a larger centroid size (WT: mean 1587±11; SOST KO: 1654±15), and are more asymmetric (SOST KO: 0.000669; WT: 0.000429 [Procrustes sum of squares]) than WT mice. Principal component analysis showed that SOST KO caused curved skulls and a smaller diameter of the foramen magnum in relation to WT mice. Moreover, SOST KO mice have dental and skeletal mandibular prognathism in relation to their WT littermates. Conclusion: Geometric morphometrics is a mathematical tool to discover morphological dissimilarities in the skull of genetically manipulated mice. This method allows visualizing morphological differences in mice that represent human genetic disorders.
- 21 April 2016
- Published by Bioscientifica in Bone Abstracts
Geometric morphometrics: a mathematical tool to compare morphological traits based onSOSTdysfunction in mice
Introduction: Genetic disorders are usually characterised by subjective morphological traits. Mouse models should represent the human situation but it is difficult to translate morphology traits from one species to another. Thus, there is a demand to objectively assess morphological traits. Geometric morphometrics is a mathematical tool to evaluate morphology based on normalised three-dimensional coordinates. Here we use geometric morphometrics to compare the morphology of SOST knockout (SOST KO) mice with respective wild type (WT) mice and relate the symptoms to human sclerosteosis. Materials and Methods: We analysed the morphological differences between six mice skulls lacking sclerostin and six respective wild type controls (ethically approved). A total of 27 landmark coordinates per skull were obtained based on microcomputed tomography surfaces. Generalized Procrustes analysis superimposes the skull shapes, allowing computing and visualizing morphological dissimilarities and size. Statistical evaluation of morphological differences was done by principal component analysis. We further computed the asymmetry by reflected relabelling and calculated the mandibular prognathism by comparison of distances. Results: Generalized Procrustes analysis revealed that SOST KO mice have a larger centroid size (WT: mean 1587±11; SOST KO: 1654±15), and are more asymmetric (SOST KO: 0.000669; WT: 0.000429 [Procrustes sum of squares]) than WT mice. Principal component analysis showed that SOST KO caused curved skulls and a smaller diameter of the foramen magnum in relation to WT mice. Moreover, SOST KO mice have dental and skeletal mandibular prognathism in relation to their WT littermates. Conclusion: Geometric morphometrics is a mathematical tool to discover morphological dissimilarities in the skull of genetically manipulated mice. This method allows visualizing morphological differences in mice that represent human genetic disorders.
- 1 July 2015
- Published by Quintessence Publishing in The International Journal of Prosthodontics
- Vol. 28 (4) , 383-385
Assessment of Artificial Teeth Setup Device: A Three-Dimensional Model Analysis
Noppavan Nagaviroj, DDS, MSc/Michael Figl, MSc, PhD/Rudolf Seemann, DDS, MD, PhD/ Toni Dobsak, BSc/Kurt Alexander Schicho, MD, PhD: This study assessed the use of the commercial artificial teeth setup device Staub Cranial System (Neu-Ulm) in Asian subjects. Fourteen completely dentate Thai volunteers were randomly recruited. Study casts (control group) and duplicated casts (experimental group) of all subjects were prepared. Artificial teeth were replaced on duplicated casts according to the manual. Computed tomography scans of all casts were performed. Intercanine width, intermolar width, incisocervical length, and occlusal plane were investigated. The length of the natural mandibular left central incisor was smaller than the reconstructed one. The reconstructed occlusal plane was more parallel to the hamular-incisive papilla plane than that of the control group.
- 1 July 2015
- Published by Quintessence Publishing in The International Journal of Prosthodontics
- Vol. 28 (4) , 383-385
Assessment of Artificial Teeth Setup Device: A Three-Dimensional Model Analysis
Noppavan Nagaviroj, DDS, MSc/Michael Figl, MSc, PhD/Rudolf Seemann, DDS, MD, PhD/ Toni Dobsak, BSc/Kurt Alexander Schicho, MD, PhD: This study assessed the use of the commercial artificial teeth setup device Staub Cranial System (Neu-Ulm) in Asian subjects. Fourteen completely dentate Thai volunteers were randomly recruited. Study casts (control group) and duplicated casts (experimental group) of all subjects were prepared. Artificial teeth were replaced on duplicated casts according to the manual. Computed tomography scans of all casts were performed. Intercanine width, intermolar width, incisocervical length, and occlusal plane were investigated. The length of the natural mandibular left central incisor was smaller than the reconstructed one. The reconstructed occlusal plane was more parallel to the hamular-incisive papilla plane than that of the control group.
- 29 June 2015
- Published by Wolters Kluwer Health in Implant Dentistry
- Vol. Publish Ah (4) , 392-396
The Effect of Parathyroid Hormone on Osseointegration in Insulin-Treated Diabetic Rats
Uncontrolled diabetes mellitus is associated with impaired osseointegration. Diabetic individuals might benefit from bone anabolic therapies. Intermittent administration of 1-34 parathyroid hormone (PTH) stimulates bone formation in rodent models. However, this anabolic effect fails in diabetic rats. Whether the anabolic effect of PTH can be achieved in insulin-controlled diabetic rats has not been investigated yet. After diabetes induction with streptozotocin in 40 female Wistar rats, the animals were randomly divided into 4 groups: diabetes, diabetes plus PTH, insulin-treated diabetes, and insulin-treated diabetes plus PTH. After 1 week, miniscrews were inserted in the tibiae. Osmotic pumps with insulin or saline solution were implanted. Animals received 60 mg/kg PTH or saline solution. Histomorphometric analysis was performed. In diabetic rats, no changes of medullary periimplant bone area or bone-to-implant contacts (BICs) were achieved with or without treatment with PTH. However, also animals treated with insulin failed to response significantly to PTH regarding bone area (7.4 ± 4.1% and 8.1 ± 4.1%) and BICs (33.7 ± 16.9% and 49.9 ± 11.9%). These results demonstrate that the metabolic characteristics of the diabetic rats produced a condition unable to respond to PTH treatment, even when hyperglycemia was controlled with insulin.
- 29 June 2015
- Published by Wolters Kluwer Health in Implant Dentistry
- Vol. Publish Ah (4) , 392-396
The Effect of Parathyroid Hormone on Osseointegration in Insulin-Treated Diabetic Rats
Uncontrolled diabetes mellitus is associated with impaired osseointegration. Diabetic individuals might benefit from bone anabolic therapies. Intermittent administration of 1-34 parathyroid hormone (PTH) stimulates bone formation in rodent models. However, this anabolic effect fails in diabetic rats. Whether the anabolic effect of PTH can be achieved in insulin-controlled diabetic rats has not been investigated yet. After diabetes induction with streptozotocin in 40 female Wistar rats, the animals were randomly divided into 4 groups: diabetes, diabetes plus PTH, insulin-treated diabetes, and insulin-treated diabetes plus PTH. After 1 week, miniscrews were inserted in the tibiae. Osmotic pumps with insulin or saline solution were implanted. Animals received 60 mg/kg PTH or saline solution. Histomorphometric analysis was performed. In diabetic rats, no changes of medullary periimplant bone area or bone-to-implant contacts (BICs) were achieved with or without treatment with PTH. However, also animals treated with insulin failed to response significantly to PTH regarding bone area (7.4 ± 4.1% and 8.1 ± 4.1%) and BICs (33.7 ± 16.9% and 49.9 ± 11.9%). These results demonstrate that the metabolic characteristics of the diabetic rats produced a condition unable to respond to PTH treatment, even when hyperglycemia was controlled with insulin.
- 21 November 2014
- Published by Springer Nature in European Radiology
- Vol. 25 (4) , 1148-1153
Radiological assessment of the inferior alveolar artery course in human corpse mandibles
CT assessment of the entire course of the inferior alveolar artery (IAA) within the mandibular canal.
- 21 November 2014
- Published by Springer Nature in European Radiology
- Vol. 25 (4) , 1148-1153
Radiological assessment of the inferior alveolar artery course in human corpse mandibles
CT assessment of the entire course of the inferior alveolar artery (IAA) within the mandibular canal.
- Open Access
- 4 April 2014
- Published by Springer Nature in International Journal of Oral Science
- Vol. 6 (2) , 70-76
Dental and periodontal phenotype in sclerostin knockout mice
Sclerostin is a Wnt signalling antagonist that controls bone metabolism. Sclerostin is expressed by osteocytes and cementocytes; however, its role in the formation of dental structures remains unclear. Here, we analysed the mandibles of sclerostin knockout mice to determine the influence of sclerostin on dental structures and dimensions using histomorphometry and micro-computed tomography (μCT) imaging. μCT and histomorphometric analyses were performed on the first lower molar and its surrounding structures in mice lacking a functional sclerostin gene and in wild-type controls. μCT on six animals in each group revealed that the dimension of the basal bone as well as the coronal and apical part of alveolar part increased in the sclerostin knockout mice. No significant differences were observed for the tooth and pulp chamber volume. Descriptive histomorphometric analyses of four wild-type and three sclerostin knockout mice demonstrated an increased width of the cementum and a concomitant moderate decrease in the periodontal space width. Taken together, these results suggest that the lack of sclerostin mainly alters the bone and cementum phenotypes rather than producing abnormalities in tooth structures such as dentin.
- 4 April 2014
- Published by Springer Nature in International Journal of Oral Science
- Vol. 6 (2) , 70-76
Open AccessDental and periodontal phenotype in sclerostin knockout mice
Sclerostin is a Wnt signalling antagonist that controls bone metabolism. Sclerostin is expressed by osteocytes and cementocytes; however, its role in the formation of dental structures remains unclear. Here, we analysed the mandibles of sclerostin knockout mice to determine the influence of sclerostin on dental structures and dimensions using histomorphometry and micro-computed tomography (μCT) imaging. μCT and histomorphometric analyses were performed on the first lower molar and its surrounding structures in mice lacking a functional sclerostin gene and in wild-type controls. μCT on six animals in each group revealed that the dimension of the basal bone as well as the coronal and apical part of alveolar part increased in the sclerostin knockout mice. No significant differences were observed for the tooth and pulp chamber volume. Descriptive histomorphometric analyses of four wild-type and three sclerostin knockout mice demonstrated an increased width of the cementum and a concomitant moderate decrease in the periodontal space width. Taken together, these results suggest that the lack of sclerostin mainly alters the bone and cementum phenotypes rather than producing abnormalities in tooth structures such as dentin.
- 12 July 2012
- Published by Wiley in Clinical Oral Implants Research
- Vol. 24 (3) , 285-289
Osteocyte lacunar density and area in newly formed bone of the augmented sinus
Objectives: Osteocytes, the most common cells of the bone, are buried in lacunae. Density and area of the osteocyte lacunae change with increasing maturation of the newly formed bone. Evaluation of osteocyte lacunae can therefore provide insights into the process of graft consolidation.Materials and Methods: Here, we determined the osteocyte lacunar density (number of osteocyte lacunae per bone area; N.Ot/BAr) and the osteocyte lacunar area in μm2 (Lac.Ar) in histological specimens 6 and 12 weeks after the sinuses of 10 minipigs were augmented with Bio‐Oss®, a deproteinized bovine bone mineral, and Ostim®, an aqueous paste of synthetic nanoparticular hydroxyapatite. The region of interest was defined by the following criteria: (i) >1 mm from the host bone, (ii) >0.5 mm from the sinus mucosa, (iii) minimum area of 0.2 mm2, and (iv) bone tissue spanning at least two bone substitute particles.Results: The overall osteocyte lacunar density was significantly higher in the Bio‐Oss® group than in the Ostim® group and decreased during the observation period at a similar range in both groups. The osteocyte lacunar area was smaller in the Bio‐Oss® group than the Ostim® group but there was no significant change within the groups over time.Conclusions: These results suggest that bone substitutes affect the osteocyte lacunar density and the osteocyte lacunar area in the newly formed bone within the augmented sinus in this particular model situation. These measures can provide insights into the maturation of newly formed bone in the augmented sinus.
- 12 July 2012
- Published by Wiley in Clinical Oral Implants Research
- Vol. 24 (3) , 285-289
Osteocyte lacunar density and area in newly formed bone of the augmented sinus
Objectives: Osteocytes, the most common cells of the bone, are buried in lacunae. Density and area of the osteocyte lacunae change with increasing maturation of the newly formed bone. Evaluation of osteocyte lacunae can therefore provide insights into the process of graft consolidation.Materials and Methods: Here, we determined the osteocyte lacunar density (number of osteocyte lacunae per bone area; N.Ot/BAr) and the osteocyte lacunar area in μm2 (Lac.Ar) in histological specimens 6 and 12 weeks after the sinuses of 10 minipigs were augmented with Bio‐Oss®, a deproteinized bovine bone mineral, and Ostim®, an aqueous paste of synthetic nanoparticular hydroxyapatite. The region of interest was defined by the following criteria: (i) >1 mm from the host bone, (ii) >0.5 mm from the sinus mucosa, (iii) minimum area of 0.2 mm2, and (iv) bone tissue spanning at least two bone substitute particles.Results: The overall osteocyte lacunar density was significantly higher in the Bio‐Oss® group than in the Ostim® group and decreased during the observation period at a similar range in both groups. The osteocyte lacunar area was smaller in the Bio‐Oss® group than the Ostim® group but there was no significant change within the groups over time.Conclusions: These results suggest that bone substitutes affect the osteocyte lacunar density and the osteocyte lacunar area in the newly formed bone within the augmented sinus in this particular model situation. These measures can provide insights into the maturation of newly formed bone in the augmented sinus.