Oleksandr Hryhorovych Leiko
Oleksandr Hryhorovych Leiko has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Oleksandr Drozdenko
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute
6 shared publications - Kateryna Drozdenko
National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute», Ukraine
3 shared publications - Liudmyla Perchevska
Національний технічний університет України «Київський політехнічний інститут імені Ігоря Сікорського
3 shared publications - Анатолій Войткович Дерепа
Центральний науково-дослідний інститут озброєння та військової техніки Збройних Сил України
3 shared publications - Yaroslav Ivanovych Starovoit
Державне підприємство "Київський науково-дослідний інститут гідроприладів
2 shared publications - Ivan Lastivka
National University "Kyiv Aviation Institute
1 shared publication
Latest Publications
- 28 June 2024
- Published by State University of Infrastructure and Technology in Vodnij Transport
- No. 2(40),p. 111-118
АКУСТИЧНІ ПОЛЯ НИЗЬКОЧАСТОТНИХ ЕЛІПТИЧНИХ ВИПРОМІНЮВАЧІВ ПОЗДОВЖНЬО-ЗГИННОГО ТИПУ В ГІДРОАКУСТИЧНИХ НАВІГАЦІЙНИХ СИСТЕМАХ
Пріоритетним напрямком розвитку гідроакустичних навігаційних систем і засобів підводного спостереження є низькочастотна активна гідролокація. Практична реалізація тенденції зниження робочих частот гідроакустичних станцій потребує пошуку нових електромеханічних коливальних систем, які мали б низькі частоти механічного резонансу і одночасно малі розміри та масу. В якості однієї з таких систем запропоновано еліптичний перетворювач поздовжньо-згинного типу. Він поєднує в собі поздовжні коливання п’єзокерамічного стрижня та згинні коливання металевої еліптичної оболонки, жорстко з’єднаної з торцями стрижня. Встановлено, що поздовжньо-згинний випромінювач має дві особливості. Перша полягає в тому, що в поперечному перерізі поздовжньо-згинний випромінювач має відносно малі розміри, завдяки чому вони є малими порівняно з довжиною робочої хвилі випромінювача. Друга особливість пов’язана з тим, що коливання випромінюючої поверхні випромінювача є неоднорідними. Оскільки коливання еліптичної оболонки є згинними, це обумовлює появу на окремих її ділянках, які прилягають до великої осі еліпсу, протифазних коливань порівняно з іншими ділянками оболонки. Запропонована схема побудови еліптичного поздовжньо-згинного перетворювача. Наведена його фізична модель, яка складається із активного п’єзокерамічного елементу стрижньового типу, що здійснює поздовжні коливання, та металевої еліптичної оболонки, яка перетворює ці поздовжні коливання в згинні коливання оболонки. Розроблена розрахункова модель поздовжньо-згинного випромінювача і на її основі в еліптичній системі координат з використанням кутових і радіальних функцій Матьє розв’язане рівняння Гельмгольца відносно потенціалу швидкості акустичного поля. На основі отриманих співвідношень для акустичного поля визначені направлені властивості поздовжньо-згинного випромінювача. Ключові слова: поздовжньо-згинний перетворювач, п’єзокерамічний елемент стрижньового типу, направлені властивості.
- 28 June 2024
- Published by State University of Infrastructure and Technology in Vodnij Transport
- No. 2(40),p. 111-118
АКУСТИЧНІ ПОЛЯ НИЗЬКОЧАСТОТНИХ ЕЛІПТИЧНИХ ВИПРОМІНЮВАЧІВ ПОЗДОВЖНЬО-ЗГИННОГО ТИПУ В ГІДРОАКУСТИЧНИХ НАВІГАЦІЙНИХ СИСТЕМАХ
Пріоритетним напрямком розвитку гідроакустичних навігаційних систем і засобів підводного спостереження є низькочастотна активна гідролокація. Практична реалізація тенденції зниження робочих частот гідроакустичних станцій потребує пошуку нових електромеханічних коливальних систем, які мали б низькі частоти механічного резонансу і одночасно малі розміри та масу. В якості однієї з таких систем запропоновано еліптичний перетворювач поздовжньо-згинного типу. Він поєднує в собі поздовжні коливання п’єзокерамічного стрижня та згинні коливання металевої еліптичної оболонки, жорстко з’єднаної з торцями стрижня. Встановлено, що поздовжньо-згинний випромінювач має дві особливості. Перша полягає в тому, що в поперечному перерізі поздовжньо-згинний випромінювач має відносно малі розміри, завдяки чому вони є малими порівняно з довжиною робочої хвилі випромінювача. Друга особливість пов’язана з тим, що коливання випромінюючої поверхні випромінювача є неоднорідними. Оскільки коливання еліптичної оболонки є згинними, це обумовлює появу на окремих її ділянках, які прилягають до великої осі еліпсу, протифазних коливань порівняно з іншими ділянками оболонки. Запропонована схема побудови еліптичного поздовжньо-згинного перетворювача. Наведена його фізична модель, яка складається із активного п’єзокерамічного елементу стрижньового типу, що здійснює поздовжні коливання, та металевої еліптичної оболонки, яка перетворює ці поздовжні коливання в згинні коливання оболонки. Розроблена розрахункова модель поздовжньо-згинного випромінювача і на її основі в еліптичній системі координат з використанням кутових і радіальних функцій Матьє розв’язане рівняння Гельмгольца відносно потенціалу швидкості акустичного поля. На основі отриманих співвідношень для акустичного поля визначені направлені властивості поздовжньо-згинного випромінювача. Ключові слова: поздовжньо-згинний перетворювач, п’єзокерамічний елемент стрижньового типу, направлені властивості.
- Open Access
- 25 September 2021
- Published by Central Scientific Research Institute of Armaments and Military Equipment of Armed Forces of Ukraine in Озброєння та військова техніка
- Vol. 31 (3) , 95-99
Зв’язок між тактико-технічними характеристиками сучасних гідроакустичних станцій активної гідролокації та їх гідроакустичними антенами і перетворювачами
Обґрунтування тактико-технічних вимог до створюваних гідроакустичних станцій надводних кораблів або модернізації існуючих потребує встановлення залежностей між основними характеристиками ефективності гідроакустичних станцій та параметрами гідроакустичних антен і перетворювачів, які входять до їх складу. В якості характеристик ефективності гідроакустичних станцій прийняті їх енергетична дальність дії та роздільна здатність. В якості параметрів гідроакустичних антен і перетворювачів визначені частоти механічних резонансів перетворювачів, їх коефіцієнти корисної дії, питома потужність випромінювання, характеристики направленості та коефіцієнти концентрації гідроакустичних антен. Наведені аналітичні співвідношення, що пов’язують характеристики ефективності гідроакустичних станцій та параметри утворюючих їх гідроакустичних антен і перетворювачів. Визначені фізичні особливості встановлених залежностей.
- 25 September 2021
- Published by Central Scientific Research Institute of Armaments and Military Equipment of Armed Forces of Ukraine in Озброєння та військова техніка
- Vol. 31 (3) , 95-99
Open AccessЗв’язок між тактико-технічними характеристиками сучасних гідроакустичних станцій активної гідролокації та їх гідроакустичними антенами і перетворювачами
Обґрунтування тактико-технічних вимог до створюваних гідроакустичних станцій надводних кораблів або модернізації існуючих потребує встановлення залежностей між основними характеристиками ефективності гідроакустичних станцій та параметрами гідроакустичних антен і перетворювачів, які входять до їх складу. В якості характеристик ефективності гідроакустичних станцій прийняті їх енергетична дальність дії та роздільна здатність. В якості параметрів гідроакустичних антен і перетворювачів визначені частоти механічних резонансів перетворювачів, їх коефіцієнти корисної дії, питома потужність випромінювання, характеристики направленості та коефіцієнти концентрації гідроакустичних антен. Наведені аналітичні співвідношення, що пов’язують характеристики ефективності гідроакустичних станцій та параметри утворюючих їх гідроакустичних антен і перетворювачів. Визначені фізичні особливості встановлених залежностей.
- Open Access
- 30 June 2021
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 3 (1(59)) , 50-55
Study of the influence of the housing on the cooling efficiency of the piezoceramic electroacoustic Langevin-type transducer
The object of research is thermal processes in Langevin-type piezoceramic electroacoustic transducers (PET), taking into account the housing. The piezoceramic electroacoustic transducers heat up during operation. Overheating of the converter leads to negative consequences, accompanied by a change in the parameters, characteristics of the device, as well as the failure of the converter. Or limitation on the duration and mode of operation, output power, current, amplitude and speed of oscillation of the converter. The paper investigates the effect of the housing on the temperature field of a Langevin-type PET by the finite element method, using modeling in SolidWorks. The results of temperature reduction of such cooling methods are shown: – filling the housing cavity with electrical insulating liquid, gas, a mixture of thermal paste; – use of holes in the housing; – changing the shape of the rear cover to have radiator side fins, vertical radiator fins, cylindrical radiator fins; – heat-resistant layer; – use of active air cooling at three different speeds. The most efficient 53 % and a uniform temperature field were found when filling with a mixture of thermal paste, but this solution is accompanied by additional experiments and a preparatory stage with the mixture. The cooling efficiency of 47 % was provided by active cooling – blowing with air, and this method requires additional equipment. Filling with insulating liquid gave a cooling efficiency of 27 % – an optimal result that does not require expensive investments. Slow blowing of the housing or adding only holes resulted in a decrease in the maximum heating temperature from 10 to 20 %, therefore, if the PET design allows the presence of holes, then it is necessary to rationally place them. Changing the shape of the back plate, heat-absorbing element, filling the housing with gas gave an efficiency decrease in the maximum temperature by 6–8 % compared to a closed housing with air. The research results make it possible to choose the optimal option for reducing the heating temperature of the Langevin-type PET to increase its efficiency and long-term trouble-free operation.
- 30 June 2021
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 3 (1(59)) , 50-55
Open AccessStudy of the influence of the housing on the cooling efficiency of the piezoceramic electroacoustic Langevin-type transducer
The object of research is thermal processes in Langevin-type piezoceramic electroacoustic transducers (PET), taking into account the housing. The piezoceramic electroacoustic transducers heat up during operation. Overheating of the converter leads to negative consequences, accompanied by a change in the parameters, characteristics of the device, as well as the failure of the converter. Or limitation on the duration and mode of operation, output power, current, amplitude and speed of oscillation of the converter. The paper investigates the effect of the housing on the temperature field of a Langevin-type PET by the finite element method, using modeling in SolidWorks. The results of temperature reduction of such cooling methods are shown: – filling the housing cavity with electrical insulating liquid, gas, a mixture of thermal paste; – use of holes in the housing; – changing the shape of the rear cover to have radiator side fins, vertical radiator fins, cylindrical radiator fins; – heat-resistant layer; – use of active air cooling at three different speeds. The most efficient 53 % and a uniform temperature field were found when filling with a mixture of thermal paste, but this solution is accompanied by additional experiments and a preparatory stage with the mixture. The cooling efficiency of 47 % was provided by active cooling – blowing with air, and this method requires additional equipment. Filling with insulating liquid gave a cooling efficiency of 27 % – an optimal result that does not require expensive investments. Slow blowing of the housing or adding only holes resulted in a decrease in the maximum heating temperature from 10 to 20 %, therefore, if the PET design allows the presence of holes, then it is necessary to rationally place them. Changing the shape of the back plate, heat-absorbing element, filling the housing with gas gave an efficiency decrease in the maximum temperature by 6–8 % compared to a closed housing with air. The research results make it possible to choose the optimal option for reducing the heating temperature of the Langevin-type PET to increase its efficiency and long-term trouble-free operation.
- Open Access
- 25 December 2020
- Published by Central Scientific Research Institute of Armaments and Military Equipment of Armed Forces of Ukraine in Озброєння та військова техніка
- Vol. 28 (4) , 83-88
Sound radiation by cylindrical hydroacoustic transducer in the presence of a screen with electrically controlled acoustic power
The problem of increasing the effi ciency of the sonar station by using a sonar antenna with an active acoustic screen is stated. Electrical control of the acoustic properties of such baffl e can provide a wide range of dynamic capabilities of the acoustic antennaand technical implementation due to this in one sonar station of several modes of its operation. Analitical expressions for quantifying the electrical, mechanical and acoustic fi elds of an antenna with a dynamic change in the parameters of the active screen using the method of coupled fi elds in multiconnected domains are obtained. A qualitative analysis of the infl uenceof individual physical factors and their mathematical analogues in the obtained analytical relations on the dynamic properties of fields are carried out.
- 25 December 2020
- Published by Central Scientific Research Institute of Armaments and Military Equipment of Armed Forces of Ukraine in Озброєння та військова техніка
- Vol. 28 (4) , 83-88
Open AccessSound radiation by cylindrical hydroacoustic transducer in the presence of a screen with electrically controlled acoustic power
The problem of increasing the effi ciency of the sonar station by using a sonar antenna with an active acoustic screen is stated. Electrical control of the acoustic properties of such baffl e can provide a wide range of dynamic capabilities of the acoustic antennaand technical implementation due to this in one sonar station of several modes of its operation. Analitical expressions for quantifying the electrical, mechanical and acoustic fi elds of an antenna with a dynamic change in the parameters of the active screen using the method of coupled fi elds in multiconnected domains are obtained. A qualitative analysis of the infl uenceof individual physical factors and their mathematical analogues in the obtained analytical relations on the dynamic properties of fields are carried out.
- 1 April 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 815-819
The Thermal Fields Analysis of Sealed Cylindrical Piezoceramic Electroacoustic Transducers Compensated Construction
The thermal fields of cylindrical piezoceramic electroacoustic transducers compensated designs sealed with metal-polymer layers are considered. The analysis on a basis of analytical calculations method and the finite element method was performed. The method of cylindrical piezoceramic electroacoustic transducers compensated construction thermal fields calculation based on the solution of the Fourier thermal conductivity differential equation is developed. The technique takes into account the features of the design implementation of transducers sealing by metal-polymer layers. A system of five infinite layers, each of which models a specific structural element of the transducer was taken as a calculation model. The solution of thermal conductivity equation which allows determine the temperatures at different points of the transducer layers is found. The investigation of cylindrical type transducer models with additional structural elements and without them using the finite element method in the SolidWorks program is carried out. Numerical calculations and comparison of thermal fields obtained by these two methods are performed. As a result of the analysis it is established that there is a significant temperature difference in the polymer membranes of the transducer construction which can lead to their destruction. The obtained results can be used during the cylindrical piezoceramic electroacoustic transducers designing.
- 1 April 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 815-819
The Thermal Fields Analysis of Sealed Cylindrical Piezoceramic Electroacoustic Transducers Compensated Construction
The thermal fields of cylindrical piezoceramic electroacoustic transducers compensated designs sealed with metal-polymer layers are considered. The analysis on a basis of analytical calculations method and the finite element method was performed. The method of cylindrical piezoceramic electroacoustic transducers compensated construction thermal fields calculation based on the solution of the Fourier thermal conductivity differential equation is developed. The technique takes into account the features of the design implementation of transducers sealing by metal-polymer layers. A system of five infinite layers, each of which models a specific structural element of the transducer was taken as a calculation model. The solution of thermal conductivity equation which allows determine the temperatures at different points of the transducer layers is found. The investigation of cylindrical type transducer models with additional structural elements and without them using the finite element method in the SolidWorks program is carried out. Numerical calculations and comparison of thermal fields obtained by these two methods are performed. As a result of the analysis it is established that there is a significant temperature difference in the polymer membranes of the transducer construction which can lead to their destruction. The obtained results can be used during the cylindrical piezoceramic electroacoustic transducers designing.
- Open Access
- 25 November 2019
- Published by Central Scientific Research Institute of Armaments and Military Equipment of Armed Forces of Ukraine in Озброєння та військова техніка
- Vol. 24 (4)
Властивості електричних полів гідроакустичних випромінювачів з внутрішніми екранами
Досліджено властивості електричних полів гідроакустичних п'єзокерамічних випромінювачів з внутрішніми акустично м'якими перегородками в широкому діапазоні частот залежно від розміру перегородок. Дослідження проводились з урахуванням взаємодії фізичних полів у процесі перетворення енергії та взаємодії п'єзокерамічної оболонки та перегородки на акустичному полі під час формування енергії в навколишньому просторі. Аналітичні співвідношення, що описують ці фізичні поля, пов'язані із загальним рішенням трьох диференціальних рівнянь - хвильового рівняння, рівняння електромеханічних коливань електропружної п'єзоелектричної оболонки та рівняння стану цієї п'єзоелектричної оболонки. Вирішення проблеми полягає у вирішенні задачі за допомогою відомих методів нескінченної системи лінійних алгебраїчних рівнянь щодо невідомих коефіцієнтів розкладання механічних та акустичних полів випромінювання в ряді Фур'є. Встановлено закономірності частотної поведінки загальних ємнісних та динамічних струмів електричного збудження випромінювачів гідроакустичних станцій та загального, активного та реактивного вхідного електричного опору цих випромінювачів. Показано складність побудови узгоджувальних пристроїв для генераторів та радіаторів в радіаційних приладах гідроакустичних станцій. Встановлено, що шляхом вибору розміру внутрішніх перегородок можна ефективно контролювати параметри електричних полів екранованих радіаторів у різних діапазонах частот роботи гідроакустичних станцій. При невеликих розмірах внутрішніх перегородок і збереженні розмірів гідроакустичних випромінювачів у полі низьких частот з'являються нові резонансні частоти, які в два рази менше за розміром, ніж основна резонансна частота екранованого випромінювача. Біля в той же час нові резонансні частоти мають більшу ефективність при перетворенні електричної енергії в акустичну. Використання цих частот збільшує дальність дії гідроакустичної станції
- 25 November 2019
- Published by Central Scientific Research Institute of Armaments and Military Equipment of Armed Forces of Ukraine in Озброєння та військова техніка
- Vol. 24 (4)
Open AccessВластивості електричних полів гідроакустичних випромінювачів з внутрішніми екранами
Досліджено властивості електричних полів гідроакустичних п'єзокерамічних випромінювачів з внутрішніми акустично м'якими перегородками в широкому діапазоні частот залежно від розміру перегородок. Дослідження проводились з урахуванням взаємодії фізичних полів у процесі перетворення енергії та взаємодії п'єзокерамічної оболонки та перегородки на акустичному полі під час формування енергії в навколишньому просторі. Аналітичні співвідношення, що описують ці фізичні поля, пов'язані із загальним рішенням трьох диференціальних рівнянь - хвильового рівняння, рівняння електромеханічних коливань електропружної п'єзоелектричної оболонки та рівняння стану цієї п'єзоелектричної оболонки. Вирішення проблеми полягає у вирішенні задачі за допомогою відомих методів нескінченної системи лінійних алгебраїчних рівнянь щодо невідомих коефіцієнтів розкладання механічних та акустичних полів випромінювання в ряді Фур'є. Встановлено закономірності частотної поведінки загальних ємнісних та динамічних струмів електричного збудження випромінювачів гідроакустичних станцій та загального, активного та реактивного вхідного електричного опору цих випромінювачів. Показано складність побудови узгоджувальних пристроїв для генераторів та радіаторів в радіаційних приладах гідроакустичних станцій. Встановлено, що шляхом вибору розміру внутрішніх перегородок можна ефективно контролювати параметри електричних полів екранованих радіаторів у різних діапазонах частот роботи гідроакустичних станцій. При невеликих розмірах внутрішніх перегородок і збереженні розмірів гідроакустичних випромінювачів у полі низьких частот з'являються нові резонансні частоти, які в два рази менше за розміром, ніж основна резонансна частота екранованого випромінювача. Біля в той же час нові резонансні частоти мають більшу ефективність при перетворенні електричної енергії в акустичну. Використання цих частот збільшує дальність дії гідроакустичної станції
- Open Access
- 31 October 2019
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Microsystems, Electronics and Acoustics
- Vol. 24 (5) , 56-63
Providing of Rod Piezoceramic Electroacoustic Transducers Thermal Mode Operation
Забезпечення теплового режиму роботи стержневих конструкцій п’єзокерамічних електроакустичних перетворювачів
- 31 October 2019
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Microsystems, Electronics and Acoustics
- Vol. 24 (5) , 56-63
Open AccessProviding of Rod Piezoceramic Electroacoustic Transducers Thermal Mode Operation
Забезпечення теплового режиму роботи стержневих конструкцій п’єзокерамічних електроакустичних перетворювачів
- Open Access
- 30 August 2019
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Microsystems, Electronics and Acoustics
- Vol. 24 (4) , 68-73
Radiation of Sound by a Cylindrical Piezoceramic Converter with Radial Polarization and a Rigid Screen
Випромінювання звуку циліндричним п’єзокерамічним перетворювачем з радіальною поляризацією і жорстким екраном
- 30 August 2019
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Microsystems, Electronics and Acoustics
- Vol. 24 (4) , 68-73
Open AccessRadiation of Sound by a Cylindrical Piezoceramic Converter with Radial Polarization and a Rigid Screen
Випромінювання звуку циліндричним п’єзокерамічним перетворювачем з радіальною поляризацією і жорстким екраном
- Open Access
- 30 April 2018
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Microsystems, Electronics and Acoustics
- Vol. 23 (2) , 58-65
Radiation of maximum acoustic power by systems of hydroacoustic cylindrical piezoceramic transducers with circular polarization
Випромінювання максимальної акустичної потужності системами гідроакустичних циліндричних п'єзокерамічних перетворювачів з окружною поляризацією
- 30 April 2018
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Microsystems, Electronics and Acoustics
- Vol. 23 (2) , 58-65
Open AccessRadiation of maximum acoustic power by systems of hydroacoustic cylindrical piezoceramic transducers with circular polarization
Випромінювання максимальної акустичної потужності системами гідроакустичних циліндричних п'єзокерамічних перетворювачів з окружною поляризацією
- Open Access
- 28 February 2018
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Microsystems, Electronics and Acoustics
- Vol. 23 (1) , 30-36
Physical fields of hydroacoustic sonar arrays with baffle and cylindrical piezoceramic radiators with radial polarization
Фізичні поля циліндричних гідроакустичних антен з екраном і циліндричними п’єзокерамічними випромінювачами з радіальною поляризацією
- 28 February 2018
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Microsystems, Electronics and Acoustics
- Vol. 23 (1) , 30-36
Open AccessPhysical fields of hydroacoustic sonar arrays with baffle and cylindrical piezoceramic radiators with radial polarization
Фізичні поля циліндричних гідроакустичних антен з екраном і циліндричними п’єзокерамічними випромінювачами з радіальною поляризацією