Se Heang Oh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Se Heang Oh has a total of 145 co-authors. Here are the top co-authors by number of shared publications:
Min Ji Kim
Department of Nanobiomedical Science, Dankook University, Cheonan, 31116, Republic of Korea
15 shared publications- Jin Ho Lee
Department of Advanced Materials, Hannam University, Daejeon 34054, Republic of Korea
11 shared publications Jin Ho Lee
Department of Advanced Materials, Hannam University, Daejeon, Republic of Korea
10 shared publications- Ho Yong Kim
Department of Nanobiomedical Science , Dankook University , Cheonan 31116 , Republic of Korea
8 shared publications June-Ho Byun
Gyeongsang National University Hospital, 79 Gangnam-ro, Jinju, 52727, Korea (the Republic of)
8 shared publicationsHo Yong Kim
Department of Nanobiomedical Science, Dankook University, Cheonan, Republic of Korea
7 shared publications
Latest Publications
- Open Access
- 13 January 2026
- Published by Springer Nature in Tissue Engineering and Regenerative Medicine
- Vol. 23 (2) , 199-208
Neutral Buoyancy as a Simple Approach to Simulated Microgravity
Background: It is well recognized that interesting biological phenomena occur in various organisms in microgravity. However, real microgravity research is limited by cost and accessibility. Furthermore, current ground-based microgravity simulators often cause shear stress and vibration, which restrict the accurate reproduction of a real microgravity environment. This study aimed to develop a simple, low-cost, and reproducible simulated microgravity system based on neutral buoyancy to reproduce an environment similar to that of real space. Methods: A neutral buoyancy medium (NBM) was created by adjusting the density of conventional cell culture medium through mixing with density gradient medium (Ficoll-Paque™, Percoll™, and Optiprep™). The buoyancy stability of human bone marrow-derived mesenchymal stem cell ( h BMSC) spheroids was examined experimentally and by computational fluid dynamics (CFD). The effects of neutral buoyancy-based simulated microgravity (3D-sim-μg) on h BMSC stemness and trilineage differentiation (osteogenic, adipogenic, and chondrogenic) were compared with normal gravity. Results: Optiprep-based NBM (Optiprep™/cell culture medium, 20/80 v/v) maintained a stable suspension of h BMSC spheroids for 14 days. CFD analysis confirmed near-zero static pressure under neutral buoyancy, reproducing a microgravity-like environment. h BMSC spheroids in 3D-sim-μg showed enhanced expression of pluripotency markers and suppressed osteogenic differentiation, with increased adipogenic and chondrogenic expression compared to normal gravity. Conclusion: The neutral buoyancy-based system effectively simulates key microgravity-associated cellular behaviors, including maintenance of stemness and lineage-specific differentiation. This approach provides a simple and accessible platform for various microgravity research endeavors.
- 13 January 2026
- Published by Springer Nature in Tissue Engineering and Regenerative Medicine
- Vol. 23 (2) , 199-208
Open AccessNeutral Buoyancy as a Simple Approach to Simulated Microgravity
Background: It is well recognized that interesting biological phenomena occur in various organisms in microgravity. However, real microgravity research is limited by cost and accessibility. Furthermore, current ground-based microgravity simulators often cause shear stress and vibration, which restrict the accurate reproduction of a real microgravity environment. This study aimed to develop a simple, low-cost, and reproducible simulated microgravity system based on neutral buoyancy to reproduce an environment similar to that of real space. Methods: A neutral buoyancy medium (NBM) was created by adjusting the density of conventional cell culture medium through mixing with density gradient medium (Ficoll-Paque™, Percoll™, and Optiprep™). The buoyancy stability of human bone marrow-derived mesenchymal stem cell ( h BMSC) spheroids was examined experimentally and by computational fluid dynamics (CFD). The effects of neutral buoyancy-based simulated microgravity (3D-sim-μg) on h BMSC stemness and trilineage differentiation (osteogenic, adipogenic, and chondrogenic) were compared with normal gravity. Results: Optiprep-based NBM (Optiprep™/cell culture medium, 20/80 v/v) maintained a stable suspension of h BMSC spheroids for 14 days. CFD analysis confirmed near-zero static pressure under neutral buoyancy, reproducing a microgravity-like environment. h BMSC spheroids in 3D-sim-μg showed enhanced expression of pluripotency markers and suppressed osteogenic differentiation, with increased adipogenic and chondrogenic expression compared to normal gravity. Conclusion: The neutral buoyancy-based system effectively simulates key microgravity-associated cellular behaviors, including maintenance of stemness and lineage-specific differentiation. This approach provides a simple and accessible platform for various microgravity research endeavors.
- 3 January 2026
- Published by Elsevier in Biomaterials
- Vol. 329, 123982
Enhanced MSC spheroid adhesion on 3D-printed leaf-stacked scaffolds for functional tracheal regeneration
- 3 January 2026
- Published by Elsevier in Biomaterials
- Vol. 329, 123982
Enhanced MSC spheroid adhesion on 3D-printed leaf-stacked scaffolds for functional tracheal regeneration
- 19 December 2025
- Published by Royal Society of Chemistry (RSC) in Biomaterials Science
- Vol. 14 (3) , 894-906
Simultaneous regeneration of epithelial and bone tissue using a multifunctional film with leaf-stacked structures and growth factors
Although guided bone regeneration (GBR) membranes are frequently utilized in oral–maxillofacial surgery, there continues to be a demand for membranes that can concurrently facilitate epithelial sealing and bone regeneration. In this work, a multilayered polycaprolactone (PCL) film, incorporating a central dense barrier layer and leaf-stacked structure layers on both surfaces for cell/tissue adhesion and bioactive molecule loading (MFLSS), was produced via a heating–cooling method using tetraglycol. Platelet-derived growth factor-BB (PDGF-BB) and bone morphogenetic protein-2 (BMP-2) were incorporated into the porous leaf-stacked layers on each side to promote epithelial and bone tissue regeneration, respectively. The PDGF-BB and BMP-2 embedded in the leaf-stacked layers were released in a sustained manner at therapeutic concentrations for 15 and 17 days, respectively. In vitro and in vivo assays indicated that the PDGF-BB-loaded layer significantly improves cell/tissue adhesion as well as cell migration, while the BMP-2-immobilized layer effectively induces osteogenic differentiation and bone formation. Collectively, these findings indicate that the multifunctional film serves as a promising GBR membrane by consistently sealing the defect site and accelerating bone healing.
- 19 December 2025
- Published by Royal Society of Chemistry (RSC) in Biomaterials Science
- Vol. 14 (3) , 894-906
Simultaneous regeneration of epithelial and bone tissue using a multifunctional film with leaf-stacked structures and growth factors
Although guided bone regeneration (GBR) membranes are frequently utilized in oral–maxillofacial surgery, there continues to be a demand for membranes that can concurrently facilitate epithelial sealing and bone regeneration. In this work, a multilayered polycaprolactone (PCL) film, incorporating a central dense barrier layer and leaf-stacked structure layers on both surfaces for cell/tissue adhesion and bioactive molecule loading (MFLSS), was produced via a heating–cooling method using tetraglycol. Platelet-derived growth factor-BB (PDGF-BB) and bone morphogenetic protein-2 (BMP-2) were incorporated into the porous leaf-stacked layers on each side to promote epithelial and bone tissue regeneration, respectively. The PDGF-BB and BMP-2 embedded in the leaf-stacked layers were released in a sustained manner at therapeutic concentrations for 15 and 17 days, respectively. In vitro and in vivo assays indicated that the PDGF-BB-loaded layer significantly improves cell/tissue adhesion as well as cell migration, while the BMP-2-immobilized layer effectively induces osteogenic differentiation and bone formation. Collectively, these findings indicate that the multifunctional film serves as a promising GBR membrane by consistently sealing the defect site and accelerating bone healing.
- Open Access
Application of Novel Biomaterials to Enhance Bone Regeneration in a Canine Non-Union Olecranon Fracture
A six-year-old, neutered male Pomeranian weighing 4.25 kg was presented with a two-year history of non-weight-bearing lameness of the left thoracic limb following an untreated traumatic olecranon fracture. Orthopedic examination revealed markedly reduced elbow joint range of motion and muscle atrophy. Radiographs demonstrated a distinct fracture line with proximolateral displacement of the olecranon fragment. Preoperative computed tomography (CT) and three-dimensional (3D) reconstruction were used to establish the surgical plan and to pre-contour a locking plate. Surgical treatment was performed in sequential steps, including removal of scar tissue, reopening of the bone marrow channel, and internal fixation. Considering the compromised biological environment of a chronic non-union, a bioactive graft composed of porous leaf-stacked structure (LSS) polycaprolactone particles incorporating recombinant human bone morphogenetic protein-2 (rhBMP-2) and mesenchymal stem cells (MSCs) was applied in combination with plate-screw fixation. The patient showed progressive improvement after surgery, achieving full weight-bearing and restoration of elbow joint motion comparable to the contralateral side. Follow-up radiographs and CT confirmed fracture union, and the radiolucency of the LSS scaffold enabled precise monitoring of bone healing. This case highlights the potential utility of combining patient-specific surgical planning with sustained delivery of rhBMP-2 and MSCs using LSS particles for the management of chronic non-union fractures in small animals.
Open AccessApplication of Novel Biomaterials to Enhance Bone Regeneration in a Canine Non-Union Olecranon Fracture
A six-year-old, neutered male Pomeranian weighing 4.25 kg was presented with a two-year history of non-weight-bearing lameness of the left thoracic limb following an untreated traumatic olecranon fracture. Orthopedic examination revealed markedly reduced elbow joint range of motion and muscle atrophy. Radiographs demonstrated a distinct fracture line with proximolateral displacement of the olecranon fragment. Preoperative computed tomography (CT) and three-dimensional (3D) reconstruction were used to establish the surgical plan and to pre-contour a locking plate. Surgical treatment was performed in sequential steps, including removal of scar tissue, reopening of the bone marrow channel, and internal fixation. Considering the compromised biological environment of a chronic non-union, a bioactive graft composed of porous leaf-stacked structure (LSS) polycaprolactone particles incorporating recombinant human bone morphogenetic protein-2 (rhBMP-2) and mesenchymal stem cells (MSCs) was applied in combination with plate-screw fixation. The patient showed progressive improvement after surgery, achieving full weight-bearing and restoration of elbow joint motion comparable to the contralateral side. Follow-up radiographs and CT confirmed fracture union, and the radiolucency of the LSS scaffold enabled precise monitoring of bone healing. This case highlights the potential utility of combining patient-specific surgical planning with sustained delivery of rhBMP-2 and MSCs using LSS particles for the management of chronic non-union fractures in small animals.
- 24 July 2025
- Published by Elsevier in Acta Biomaterialia
- Vol. 203, 399-411
Low modulus PMMA-based bone cement for the reduction of adjacent vertebral fractures after vertebroplasty
- 24 July 2025
- Published by Elsevier in Acta Biomaterialia
- Vol. 203, 399-411
Low modulus PMMA-based bone cement for the reduction of adjacent vertebral fractures after vertebroplasty
- 8 April 2025
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 8 (4) , 3375-3388
Multilayer Film with Bioactive and Antiadhesive Layers for Accelerated Tendon Regeneration
Despite advances in surgical techniques for tendon injuries and improvements in rehabilitation, the challenge of achieving sufficient tendon regeneration and preventing postoperative tissue adhesions persists for orthopedic surgeons. In this study, we developed a multilayer film with a platelet-derived growth factor-BB (PDGF-BB)-immobilized leaf-stacked structure (LSS) layer (bioactive layer) and an alginate layer (antiadhesive layer) on both sides of a PCL film (PDGF/FLSS-Alg). The porous LSS layer on the PCL film was fabricated using a heating-cooling method with tetraglycol, where PDGF-BB was adsorbed onto the LSS layer. An alginate coating was applied on the opposite side to form the antiadhesion layer. The PDGF-BB loaded on the LSS layer provided a sustained release at effective concentrations for over 29 days. From in vitro cell culture and in vivo animal studies, the alginate layer proved effective in preventing cell/tissue adhesion; meanwhile, the bioactive layer facilitated tenogenic differentiation in hBMSCs and supported tendon regeneration. Accordingly, we propose that PDGF/FLSS-Alg offers a viable strategy for effective tendon regeneration in clinical practice.
- 8 April 2025
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 8 (4) , 3375-3388
Multilayer Film with Bioactive and Antiadhesive Layers for Accelerated Tendon Regeneration
Despite advances in surgical techniques for tendon injuries and improvements in rehabilitation, the challenge of achieving sufficient tendon regeneration and preventing postoperative tissue adhesions persists for orthopedic surgeons. In this study, we developed a multilayer film with a platelet-derived growth factor-BB (PDGF-BB)-immobilized leaf-stacked structure (LSS) layer (bioactive layer) and an alginate layer (antiadhesive layer) on both sides of a PCL film (PDGF/FLSS-Alg). The porous LSS layer on the PCL film was fabricated using a heating-cooling method with tetraglycol, where PDGF-BB was adsorbed onto the LSS layer. An alginate coating was applied on the opposite side to form the antiadhesion layer. The PDGF-BB loaded on the LSS layer provided a sustained release at effective concentrations for over 29 days. From in vitro cell culture and in vivo animal studies, the alginate layer proved effective in preventing cell/tissue adhesion; meanwhile, the bioactive layer facilitated tenogenic differentiation in hBMSCs and supported tendon regeneration. Accordingly, we propose that PDGF/FLSS-Alg offers a viable strategy for effective tendon regeneration in clinical practice.
- 4 April 2025
- Published by American Chemical Society (ACS) in ACS Biomaterials Science & Engineering
- Vol. 11 (4) , 2274-2289
Esophageal Reconstruction with Myogenesis-Inducing Gene Transfected Mesenchymal Stem Cell-Seeded Film with Leaf-Stacked Structure
In the domain of tissue engineering and regenerative medicine, artificial replacements have been developed as viable options for esophageal reconstruction and serve as alternatives to traditional surgical procedures. Restoration of smooth muscle functionality is crucial in esophageal regeneration. We evaluated the efficacy of esophageal reconstructions in an animal model, using tissue-engineered films with a leaf-stacked structure (FLSS), seeded with mesenchymal stem cells (MSCs), which were genetically modified with myogenic genes. Esophageal partial defects were variously reconstructed in animals (n = 8 per group, except the no-implantation group), categorized as (1) normal rats; (2) rats implanted with naked FLSS; (3) rats implanted with FLSS with MSCs; (4) rats implanted using FLSS with myogenesis-inducing gene transfected MSCs; and (5) rats without implantation at the defect site (n = 3). The FLSS exhibited appropriate mechanical characteristics for transplantation. Successful repair of esophageal defects was observed with significantly enhanced epithelial regeneration in the MSC-seeded FLSS group compared to that in the naked FLSS group. Moreover, smooth muscle regeneration was notably higher in the FLSS with myogenesis-inducing gene transfected MSCs than in the group without myogenic gene transfection. The myogenesis-inducing gene-transfected MSC-seeded FLSS group showed a tendency toward increased smooth muscle regeneration, this indicates that FLSS with myogenesis-inducing genes transfected MSC may contribute positively to the maintenance of function in the reconstructed esophagus.
- 4 April 2025
- Published by American Chemical Society (ACS) in ACS Biomaterials Science & Engineering
- Vol. 11 (4) , 2274-2289
Esophageal Reconstruction with Myogenesis-Inducing Gene Transfected Mesenchymal Stem Cell-Seeded Film with Leaf-Stacked Structure
In the domain of tissue engineering and regenerative medicine, artificial replacements have been developed as viable options for esophageal reconstruction and serve as alternatives to traditional surgical procedures. Restoration of smooth muscle functionality is crucial in esophageal regeneration. We evaluated the efficacy of esophageal reconstructions in an animal model, using tissue-engineered films with a leaf-stacked structure (FLSS), seeded with mesenchymal stem cells (MSCs), which were genetically modified with myogenic genes. Esophageal partial defects were variously reconstructed in animals (n = 8 per group, except the no-implantation group), categorized as (1) normal rats; (2) rats implanted with naked FLSS; (3) rats implanted with FLSS with MSCs; (4) rats implanted using FLSS with myogenesis-inducing gene transfected MSCs; and (5) rats without implantation at the defect site (n = 3). The FLSS exhibited appropriate mechanical characteristics for transplantation. Successful repair of esophageal defects was observed with significantly enhanced epithelial regeneration in the MSC-seeded FLSS group compared to that in the naked FLSS group. Moreover, smooth muscle regeneration was notably higher in the FLSS with myogenesis-inducing gene transfected MSCs than in the group without myogenic gene transfection. The myogenesis-inducing gene-transfected MSC-seeded FLSS group showed a tendency toward increased smooth muscle regeneration, this indicates that FLSS with myogenesis-inducing genes transfected MSC may contribute positively to the maintenance of function in the reconstructed esophagus.
- 19 June 2024
- Published by Springer Nature in Tissue Engineering and Regenerative Medicine
- Vol. 21 (7) , 995-1005
Platelet-Rich Plasma-Embedded Porous Polycaprolactone Film with a Large Surface Area for Effective Hemostasis
Background: Uncontrollable and widespread bleeding caused by surgery or sudden accidents can lead to death if not treated with appropriate hemostasis. To prevent excessive life-threatening bleeding, various hemostatic agents based on polymeric biomaterials with various additives for accelerated blood coagulation have been adopted in clinical fields. In particular, platelet-rich plasma (PRP), which contains many blood coagulation factors that can accelerate blood clot formation, is considered as one of the most effective hemostatic additives. Methods: We investigated a PRP-embedded porous film using discarded (expired) PRP and a film with a leaf-stacked structure (FLSS), as a hemostatic agent to induce rapid hemostasis. The film, which contained an LSS on one side (PCL-FLSS), was fabricated by a simple heating–cooling technique using tetraglycol and polycaprolactone (PCL) film. Activated PRP was obtained by the thawing of frozen PRP at the end of its expiration date (the platelet cell membrane is disrupted during the freezing and thawing of PRP, thus releasing various coagulation factors) and embedded in the PCL-FLSS (PRP-FLSS). Results: From in vitro and in vivo experiments using a rat hepatic bleeding model, it was recognized that PRP-FLSS is not only biocompatible but also significantly accelerates blood clotting and thus prevents rapid bleeding, probably due to a synergistic effect of the sufficient supply of various blood coagulants from activated PRP embedded in the LSS layer and the large surface area of the LSS itself. Conclusion: The study suggests that PRP-FLSS, a combination of a porous polymer matrix with a unique morphology and discarded biofunctional resources, can be an advanced hemostatic agent as well as an upcycling platform to avoid the waste of biofunctional resources.
- 19 June 2024
- Published by Springer Nature in Tissue Engineering and Regenerative Medicine
- Vol. 21 (7) , 995-1005
Platelet-Rich Plasma-Embedded Porous Polycaprolactone Film with a Large Surface Area for Effective Hemostasis
Background: Uncontrollable and widespread bleeding caused by surgery or sudden accidents can lead to death if not treated with appropriate hemostasis. To prevent excessive life-threatening bleeding, various hemostatic agents based on polymeric biomaterials with various additives for accelerated blood coagulation have been adopted in clinical fields. In particular, platelet-rich plasma (PRP), which contains many blood coagulation factors that can accelerate blood clot formation, is considered as one of the most effective hemostatic additives. Methods: We investigated a PRP-embedded porous film using discarded (expired) PRP and a film with a leaf-stacked structure (FLSS), as a hemostatic agent to induce rapid hemostasis. The film, which contained an LSS on one side (PCL-FLSS), was fabricated by a simple heating–cooling technique using tetraglycol and polycaprolactone (PCL) film. Activated PRP was obtained by the thawing of frozen PRP at the end of its expiration date (the platelet cell membrane is disrupted during the freezing and thawing of PRP, thus releasing various coagulation factors) and embedded in the PCL-FLSS (PRP-FLSS). Results: From in vitro and in vivo experiments using a rat hepatic bleeding model, it was recognized that PRP-FLSS is not only biocompatible but also significantly accelerates blood clotting and thus prevents rapid bleeding, probably due to a synergistic effect of the sufficient supply of various blood coagulants from activated PRP embedded in the LSS layer and the large surface area of the LSS itself. Conclusion: The study suggests that PRP-FLSS, a combination of a porous polymer matrix with a unique morphology and discarded biofunctional resources, can be an advanced hemostatic agent as well as an upcycling platform to avoid the waste of biofunctional resources.
- 9 February 2024
- Published by IOP Publishing in Biofabrication
- Vol. 16 (2) , 025014
BMP-2-immobilized PCL 3D printing scaffold with a leaf-stacked structure as a physically and biologically activated bone graft
Although three-dimensional (3D) printing techniques are used to mimic macro- and micro-structures as well as multi-structural human tissues in tissue engineering, efficient target tissue regeneration requires bioactive 3D printing scaffolds. In this study, we developed a bone morphogenetic protein-2 (BMP-2)-immobilized polycaprolactone (PCL) 3D printing scaffold with leaf-stacked structure (LSS) (3D-PLSS-BMP) as a bioactive patient-tailored bone graft. The unique LSS was introduced on the strand surface of the scaffold via heating/cooling in tetraglycol without significant deterioration in physical properties. The BMP-2 adsorbed on 3D-PLSS-BMP was continuously released from LSS over a period of 32 d. The LSS can be a microtopographical cue for improved focal cell adhesion, proliferation, and osteogenic differentiation. In vitro cell culture and in vivo animal studies demonstrated the biological (bioactive BMP-2) and physical (microrough structure) mechanisms of 3D-PLSS-BMP for accelerated bone regeneration. Thus, bioactive molecule-immobilized 3D printing scaffold with LSS represents a promising physically and biologically activated bone graft as well as an advanced tool for widespread application in clinical and research fields.
- 9 February 2024
- Published by IOP Publishing in Biofabrication
- Vol. 16 (2) , 025014
BMP-2-immobilized PCL 3D printing scaffold with a leaf-stacked structure as a physically and biologically activated bone graft
Although three-dimensional (3D) printing techniques are used to mimic macro- and micro-structures as well as multi-structural human tissues in tissue engineering, efficient target tissue regeneration requires bioactive 3D printing scaffolds. In this study, we developed a bone morphogenetic protein-2 (BMP-2)-immobilized polycaprolactone (PCL) 3D printing scaffold with leaf-stacked structure (LSS) (3D-PLSS-BMP) as a bioactive patient-tailored bone graft. The unique LSS was introduced on the strand surface of the scaffold via heating/cooling in tetraglycol without significant deterioration in physical properties. The BMP-2 adsorbed on 3D-PLSS-BMP was continuously released from LSS over a period of 32 d. The LSS can be a microtopographical cue for improved focal cell adhesion, proliferation, and osteogenic differentiation. In vitro cell culture and in vivo animal studies demonstrated the biological (bioactive BMP-2) and physical (microrough structure) mechanisms of 3D-PLSS-BMP for accelerated bone regeneration. Thus, bioactive molecule-immobilized 3D printing scaffold with LSS represents a promising physically and biologically activated bone graft as well as an advanced tool for widespread application in clinical and research fields.
- Open Access
- 13 June 2023
- Published by Elsevier in Materials Today Bio
- Vol. 21, 100685
A bioactive microparticle-loaded osteogenically enhanced bioprinted scaffold that permits sustained release of BMP-2
- 13 June 2023
- Published by Elsevier in Materials Today Bio
- Vol. 21, 100685
Open AccessA bioactive microparticle-loaded osteogenically enhanced bioprinted scaffold that permits sustained release of BMP-2