Axel Hoffmann
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Axel Hoffmann has a total of 548 co-authors. Here are the top co-authors by number of shared publications:
- Markus Raphael Wagner
Technische Universität Berlin, Institute of Solid State Physics 1 , Hardenbergstr. 36, 10623 Berlin, Germany
26 shared publications - Gordon Callsen
Institute of Physics, École Polytechnique Fédérale de Lausanne (EPFL), CH-1015 Lausanne, Switzerland
18 shared publications - Juan Sebastian Reparaz
Institut de Ciència de Materials de Barcelona, ICMAB-CSIC, Campus UAB, 08193 Bellaterra, Spain
11 shared publications Ronny Kirste
Adroit Materials, Inc. 3 , 991 Aviation Pkwy, Suite 800, Morrisville, North Carolina 27560, USA
10 shared publications- Andre Strittmatter
Otto-von-Guericke-Universität Magdeburg, Institut für Physik 1 , Universitätsplatz 2, 39106 Magdeburg
9 shared publications - Matthew R. Phillips
School of Mathematical and Physical Sciences, University of Technology Sydney, Ultimo, NSW 2007, Australia
8 shared publications
Latest Publications
- Open Access
- 1 December 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (23) , 4269
A Comparative Study of the Band-Edge Exciton Fine Structure in Zinc Blende and Wurtzite CdSe Nanocrystals
In this paper, we studied the role of the crystal structure in spheroidal CdSe nanocrystals on the band-edge exciton fine structure. Ensembles of zinc blende and wurtzite CdSe nanocrystals are investigated experimentally by two optical techniques: fluorescence line narrowing (FLN) and time-resolved photoluminescence. We argue that the zero-phonon line evaluated by the FLN technique gives the ensemble-averaged energy splitting between the lowest bright and dark exciton states, while the activation energy from the temperature-dependent photoluminescence decay is smaller and corresponds to the energy of an acoustic phonon. The energy splittings between the bright and dark exciton states determined using the FLN technique are found to be the same for zinc blende and wurtzite CdSe nanocrystals. Within the effective mass approximation, we develop a theoretical model considering the following factors: (i) influence of the nanocrystal shape on the bright–dark exciton splitting and the oscillator strength of the bright exciton, and (ii) shape dispersion in the ensemble of the nanocrystals. We show that these two factors result in similar calculated zero-phonon lines in zinc blende and wurtzite CdSe nanocrystals. The account of the nanocrystals shape dispersion allows us to evaluate the linewidth of the zero-phonon line.
- 1 December 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (23) , 4269
Open AccessA Comparative Study of the Band-Edge Exciton Fine Structure in Zinc Blende and Wurtzite CdSe Nanocrystals
In this paper, we studied the role of the crystal structure in spheroidal CdSe nanocrystals on the band-edge exciton fine structure. Ensembles of zinc blende and wurtzite CdSe nanocrystals are investigated experimentally by two optical techniques: fluorescence line narrowing (FLN) and time-resolved photoluminescence. We argue that the zero-phonon line evaluated by the FLN technique gives the ensemble-averaged energy splitting between the lowest bright and dark exciton states, while the activation energy from the temperature-dependent photoluminescence decay is smaller and corresponds to the energy of an acoustic phonon. The energy splittings between the bright and dark exciton states determined using the FLN technique are found to be the same for zinc blende and wurtzite CdSe nanocrystals. Within the effective mass approximation, we develop a theoretical model considering the following factors: (i) influence of the nanocrystal shape on the bright–dark exciton splitting and the oscillator strength of the bright exciton, and (ii) shape dispersion in the ensemble of the nanocrystals. We show that these two factors result in similar calculated zero-phonon lines in zinc blende and wurtzite CdSe nanocrystals. The account of the nanocrystals shape dispersion allows us to evaluate the linewidth of the zero-phonon line.
- Open Access
- 12 February 2018
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 10 (12) , 5591-5598
Optical emission of GaN/AlN quantum-wires – the role of charge transfer from a nanowire template
One-dimensional GaN quantum-wires grown on nanowire templates exhibit bright and sharp luminescence due to carrier transfer from the nanowire cores.
- 12 February 2018
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 10 (12) , 5591-5598
Open AccessOptical emission of GaN/AlN quantum-wires – the role of charge transfer from a nanowire template
One-dimensional GaN quantum-wires grown on nanowire templates exhibit bright and sharp luminescence due to carrier transfer from the nanowire cores.
- 26 January 2017
- Published by SPIE-Intl Soc Optical Eng in SPIE Newsroom
Room-temperature blue-emitting high-beta gallium nitride nanobeam cavity lasers
- 26 January 2017
- Published by SPIE-Intl Soc Optical Eng in SPIE Newsroom
Room-temperature blue-emitting high-beta gallium nitride nanobeam cavity lasers
- 8 September 2016
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 120 (10) , 105701
Correlation between mobility collapse and carbon impurities in Si-doped GaN grown by low pressure metalorganic chemical vapor deposition
In the low doping range below 1 × 1017 cm−3, carbon was identified as the main defect attributing to the sudden reduction of the electron mobility, the electron mobility collapse, in n-type GaN grown by low pressure metalorganic chemical vapor deposition. Secondary ion mass spectroscopy has been performed in conjunction with C concentration and the thermodynamic Ga supersaturation model. By controlling the ammonia flow rate, the input partial pressure of Ga precursor, and the diluent gas within the Ga supersaturation model, the C concentration in Si-doped GaN was controllable from 6 × 1019 cm−3 to values as low as 2 × 1015 cm−3. It was found that the electron mobility collapsed as a function of free carrier concentration, once the Si concentration closely approached the C concentration. Lowering the C concentration to the order of 1015 cm−3 by optimizing Ga supersaturation achieved controllable free carrier concentrations down to 5 × 1015 cm−3 with a peak electron mobility of 820 cm2/V s without observing the mobility collapse. The highest electron mobility of 1170 cm2/V s was obtained even in metalorganic vapor deposition-grown GaN on sapphire substrates by optimizing growth parameters in terms of Ga supersaturation to reduce the C concentration.
- 8 September 2016
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 120 (10) , 105701
Correlation between mobility collapse and carbon impurities in Si-doped GaN grown by low pressure metalorganic chemical vapor deposition
In the low doping range below 1 × 1017 cm−3, carbon was identified as the main defect attributing to the sudden reduction of the electron mobility, the electron mobility collapse, in n-type GaN grown by low pressure metalorganic chemical vapor deposition. Secondary ion mass spectroscopy has been performed in conjunction with C concentration and the thermodynamic Ga supersaturation model. By controlling the ammonia flow rate, the input partial pressure of Ga precursor, and the diluent gas within the Ga supersaturation model, the C concentration in Si-doped GaN was controllable from 6 × 1019 cm−3 to values as low as 2 × 1015 cm−3. It was found that the electron mobility collapsed as a function of free carrier concentration, once the Si concentration closely approached the C concentration. Lowering the C concentration to the order of 1015 cm−3 by optimizing Ga supersaturation achieved controllable free carrier concentrations down to 5 × 1015 cm−3 with a peak electron mobility of 820 cm2/V s without observing the mobility collapse. The highest electron mobility of 1170 cm2/V s was obtained even in metalorganic vapor deposition-grown GaN on sapphire substrates by optimizing growth parameters in terms of Ga supersaturation to reduce the C concentration.
- 7 July 2016
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 120 (1) , 015703
Unintentional indium incorporation into barriers of InGaN/GaN multiple quantum wells studied by photoreflectance and photoluminescence excitation spectroscopy
InxGa1–xN/GaN single and multi quantum well (MQW) structures with x ≈ 0.13 were investigated optically by photoreflectance, photoluminescence excitation spectroscopy, and luminescence. Clear evidence of unintentional indium incorporation into the nominal GaN barrier layers is found. The unintentional In content is found to be around 3%. Inhomogeneous distribution of In atoms occurs within the distinct quantum well (QW) layers, which is commonly described as statistical alloy fluctuation and leads to the characteristic S-shape temperature shift of emission energy. Furthermore, differences in emission energy between the first and the other QWs of a MQW stack are found experimentally. This effect is discussed with the help of model calculations and is assigned to differences in the confining potential due to unwanted indium incorporation for the upper QWs.
- 7 July 2016
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 120 (1) , 015703
Unintentional indium incorporation into barriers of InGaN/GaN multiple quantum wells studied by photoreflectance and photoluminescence excitation spectroscopy
InxGa1–xN/GaN single and multi quantum well (MQW) structures with x ≈ 0.13 were investigated optically by photoreflectance, photoluminescence excitation spectroscopy, and luminescence. Clear evidence of unintentional indium incorporation into the nominal GaN barrier layers is found. The unintentional In content is found to be around 3%. Inhomogeneous distribution of In atoms occurs within the distinct quantum well (QW) layers, which is commonly described as statistical alloy fluctuation and leads to the characteristic S-shape temperature shift of emission energy. Furthermore, differences in emission energy between the first and the other QWs of a MQW stack are found experimentally. This effect is discussed with the help of model calculations and is assigned to differences in the confining potential due to unwanted indium incorporation for the upper QWs.
- 27 June 2016
- Published by AIP Publishing in Applied Physics Letters
- Vol. 108 (26) , 261106
Fabrication and structural properties of AlN submicron periodic lateral polar structures and waveguides for UV-C applications
Periodically poled AlN thin films with submicron domain widths were fabricated for nonlinear applications in the UV-VIS region. A procedure utilizing metalorganic chemical vapor deposition growth of AlN in combination with laser interference lithography was developed for making a nanoscale lateral polarity structure (LPS) with domain size down to 600 nm. The Al-polar and N-polar domains were identified by wet etching the periodic LPS in a potassium hydroxide solution and subsequent scanning electron microscopy (SEM) characterization. Fully coalesced and well-defined vertical interfaces between the adjacent domains were established by cross-sectional SEM. AlN LPSs were mechanically polished and surface roughness with a root mean square value of ∼10 nm over a 90 μm × 90 μm area was achieved. 3.8 μm wide and 650 nm thick AlN LPS waveguides were fabricated. The achieved domain sizes, surface roughness, and waveguides are suitable for second harmonic generation in the UVC spectrum.
- 27 June 2016
- Published by AIP Publishing in Applied Physics Letters
- Vol. 108 (26) , 261106
Fabrication and structural properties of AlN submicron periodic lateral polar structures and waveguides for UV-C applications
Periodically poled AlN thin films with submicron domain widths were fabricated for nonlinear applications in the UV-VIS region. A procedure utilizing metalorganic chemical vapor deposition growth of AlN in combination with laser interference lithography was developed for making a nanoscale lateral polarity structure (LPS) with domain size down to 600 nm. The Al-polar and N-polar domains were identified by wet etching the periodic LPS in a potassium hydroxide solution and subsequent scanning electron microscopy (SEM) characterization. Fully coalesced and well-defined vertical interfaces between the adjacent domains were established by cross-sectional SEM. AlN LPSs were mechanically polished and surface roughness with a root mean square value of ∼10 nm over a 90 μm × 90 μm area was achieved. 3.8 μm wide and 650 nm thick AlN LPS waveguides were fabricated. The achieved domain sizes, surface roughness, and waveguides are suitable for second harmonic generation in the UVC spectrum.
- 7 June 2016
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 119 (21) , 215707
Polarization-induced confinement of continuous hole-states in highly pumped, industrial-grade, green InGaN quantum wells
We investigate industrial-grade InGaN/GaN quantum wells (QWs) emitting in the green spectral region under high, resonant pumping conditions. Consequently, an ubiquitous high energy luminescence is observed that we assign to a polarization field Confined Hole Continuum (CHC). Our finding is supported by a unique combination of experimental techniques, including transmission electron microscopy, (time-resolved) photoluminescence under various excitation conditions, and electroluminescence, which confirm an extended out-of-plane localization of the CHC-states. The larger width of this localization volume surpasses the QW thickness, yielding enhanced non-radiative losses due to point defects and interfaces, whereas the energetic proximity to the bulk valence band states promotes carrier leakage.
- 7 June 2016
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 119 (21) , 215707
Polarization-induced confinement of continuous hole-states in highly pumped, industrial-grade, green InGaN quantum wells
We investigate industrial-grade InGaN/GaN quantum wells (QWs) emitting in the green spectral region under high, resonant pumping conditions. Consequently, an ubiquitous high energy luminescence is observed that we assign to a polarization field Confined Hole Continuum (CHC). Our finding is supported by a unique combination of experimental techniques, including transmission electron microscopy, (time-resolved) photoluminescence under various excitation conditions, and electroluminescence, which confirm an extended out-of-plane localization of the CHC-states. The larger width of this localization volume surpasses the QW thickness, yielding enhanced non-radiative losses due to point defects and interfaces, whereas the energetic proximity to the bulk valence band states promotes carrier leakage.
- 2 March 2016
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 55 (5S) , 05FG01
Photoluminescence excitation spectroscopy of excited states of an asymmetric cubic GaN/Al0.25Ga0.75N double quantum well grown by molecular beam epitaxy
Optical transitions involving higher energy levels of cubic AlGaN quantum wells are investigated by means of photoluminescence excitation spectroscopy. An asymmetric cubic GaN/Al x Ga1− x N double quantum well (QW) structure with an Al content of x = 0.25 ± 0.03 was grown on a 3C-SiC(001) substrate exploiting radio-frequency plasma-assisted molecular beam epitaxy. The photoluminescence excitation data reveals two emission bands, which are assigned to the first electron and the third heavy hole (e1–hh3) and the second electron and the second heavy hole (e2–hh2) energy level of the wide QW. Besides in the narrow QW no higher energy levels can be observed. The experimental data is in good agreement with theoretical calculations using a Schrödinger–Poisson solver based on an effective mass model (nextnano3). The exciton binding energy was calculated considering the confinement of the QWs and also the energy dependency of the effective mass for excited energy levels.
- 2 March 2016
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 55 (5S) , 05FG01
Photoluminescence excitation spectroscopy of excited states of an asymmetric cubic GaN/Al0.25Ga0.75N double quantum well grown by molecular beam epitaxy
Optical transitions involving higher energy levels of cubic AlGaN quantum wells are investigated by means of photoluminescence excitation spectroscopy. An asymmetric cubic GaN/Al x Ga1− x N double quantum well (QW) structure with an Al content of x = 0.25 ± 0.03 was grown on a 3C-SiC(001) substrate exploiting radio-frequency plasma-assisted molecular beam epitaxy. The photoluminescence excitation data reveals two emission bands, which are assigned to the first electron and the third heavy hole (e1–hh3) and the second electron and the second heavy hole (e2–hh2) energy level of the wide QW. Besides in the narrow QW no higher energy levels can be observed. The experimental data is in good agreement with theoretical calculations using a Schrödinger–Poisson solver based on an effective mass model (nextnano3). The exciton binding energy was calculated considering the confinement of the QWs and also the energy dependency of the effective mass for excited energy levels.
- 26 February 2016
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 55 (5S) , 05FJ01
Determination of recombination coefficients in InGaN quantum-well light-emitting diodes by small-signal time-resolved photoluminescence
We suggest a novel technique for the evaluation of the recombination coefficients corresponding to Shockley–Read–Hall, radiative, and Auger recombination that occur in InGaN/GaN-based light-emitting diodes (LEDs). This technique combines the measurement of the LED efficiency as a function of LED drive current with a small-signal time-resolved photoluminescence measurement of the differential carrier life time (DLT). Using the relationships between the efficiency and DLT following from the empirical ABC-model, one can evaluate all three recombination coefficients. The suggested technique is applied to a number of single- and multiple-quantum well LEDs to gain a deeper insight into the mechanisms ultimately limiting their efficiency.
- 26 February 2016
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 55 (5S) , 05FJ01
Determination of recombination coefficients in InGaN quantum-well light-emitting diodes by small-signal time-resolved photoluminescence
We suggest a novel technique for the evaluation of the recombination coefficients corresponding to Shockley–Read–Hall, radiative, and Auger recombination that occur in InGaN/GaN-based light-emitting diodes (LEDs). This technique combines the measurement of the LED efficiency as a function of LED drive current with a small-signal time-resolved photoluminescence measurement of the differential carrier life time (DLT). Using the relationships between the efficiency and DLT following from the empirical ABC-model, one can evaluate all three recombination coefficients. The suggested technique is applied to a number of single- and multiple-quantum well LEDs to gain a deeper insight into the mechanisms ultimately limiting their efficiency.
- 1 February 2016
- Published by IOP Publishing in Materials Research Express
- Vol. 3 (2) , 025010
Spatially controlled growth of highly crystalline ZnO nanowires by an inkjet-printing catalyst-free method
High-density arrays of uniform ZnO nanowires with a high-crystal quality have been synthesized by a catalyst-free vapor-transport method. First, a thin ZnO film was deposited on a Si substrate as nucleation layer for the ZnO nanowires. Second, spatially selective and mask-less growth of ZnO nanowires was achieved using inkjet-printed patterned islands as the nucleation sites on a SiO2/Si substrate. Raman scattering and low temperature photoluminescence measurements were applied to characterize the structural and optical properties of the ZnO nanowires. The results reveal negligible amounts of strain and defects in the mask-less ZnO nanowires as compared to the ones grown on the ZnO thin film, which underlines the potential of the inkjet-printing approach for the growth of high-crystal quality ZnO nanowires.
- 1 February 2016
- Published by IOP Publishing in Materials Research Express
- Vol. 3 (2) , 025010
Spatially controlled growth of highly crystalline ZnO nanowires by an inkjet-printing catalyst-free method
High-density arrays of uniform ZnO nanowires with a high-crystal quality have been synthesized by a catalyst-free vapor-transport method. First, a thin ZnO film was deposited on a Si substrate as nucleation layer for the ZnO nanowires. Second, spatially selective and mask-less growth of ZnO nanowires was achieved using inkjet-printed patterned islands as the nucleation sites on a SiO2/Si substrate. Raman scattering and low temperature photoluminescence measurements were applied to characterize the structural and optical properties of the ZnO nanowires. The results reveal negligible amounts of strain and defects in the mask-less ZnO nanowires as compared to the ones grown on the ZnO thin film, which underlines the potential of the inkjet-printing approach for the growth of high-crystal quality ZnO nanowires.