V. I. Bobrovskii
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
V. I. Bobrovskii has a total of 107 co-authors. Here are the top co-authors by number of shared publications:
- Andrey Podlesnyak
Oak Ridge National Laboratory
19 shared publications - Alexei Mirmelstein
Institute for Metal Physics RAS, 620219 Ekaterinburg GSP-170, Russia
16 shared publications - Eduard B. Mitberg
NRC “Kurchatov Institute”, TISNCM, Moscow, Russia
11 shared publications A. Furrer
ETH Zürich & PSI
8 shared publications- Vladimir I. Voronin
Joint Institute for Nuclear Research 141980 Dubna Moscow region Russia
8 shared publications E. Khlybov
5 shared publications
Latest Publications
- Open Access
- 1 June 2025
- Published by Institute of Engineering Science, Ural Branch RAS in Diagnostics, Resource and Mechanics of materials and structures
- Vol. 2025 (3) , 6-15
On the abnormal behavior of compressibility in the Fe72Pt28 invar alloy
Bobrovskii E. Z. Valiev and V. I. On the Abnormal Behavior of Compressibility in the Fe72pt28 Invar Alloy // Diagnostics, Resource and Mechanics of materials and structures.- 2025 - Iss. 3.
- 1 June 2025
- Published by Institute of Engineering Science, Ural Branch RAS in Diagnostics, Resource and Mechanics of materials and structures
- Vol. 2025 (3) , 6-15
Open AccessOn the abnormal behavior of compressibility in the Fe72Pt28 invar alloy
Bobrovskii E. Z. Valiev and V. I. On the Abnormal Behavior of Compressibility in the Fe72pt28 Invar Alloy // Diagnostics, Resource and Mechanics of materials and structures.- 2025 - Iss. 3.
- 1 December 2024
- Published by Institute of Engineering Science, Ural Branch RAS in Diagnostics, Resource and Mechanics of materials and structures
- No. 6,p. 18-34
Neutron diffraction studies of carbide precipitate forming in the 0.04C–4Cr–18Mn–2V steel under thermal aging and fast-neutron irradiation
Aging austenitic steels are characterized by a complex microstructure and various defects and precipitates, which largely determine the properties of steels. The formation and evolution of a system of defects in these materials are accompanied by changes in the Bragg and diffuse neutron scattering spectra. This makes neutron diffraction methods an effective means of studying them. This paper analyzes the results of our neutron diffraction experiments studying the changes in the crystal structure and a system of carbide precipitates in the 0.4C-4Cr-18Mn-2V austenitic manganese steel, which develop in the material under thermal aging and irradiation by fast neutron fluxes. Differences occurring under these effects are revealed. The results of the analysis are in good agreement with the electron microscopic data and supplement them in terms of studying irradiated samples.
- 1 December 2024
- Published by Institute of Engineering Science, Ural Branch RAS in Diagnostics, Resource and Mechanics of materials and structures
- No. 6,p. 18-34
Neutron diffraction studies of carbide precipitate forming in the 0.04C–4Cr–18Mn–2V steel under thermal aging and fast-neutron irradiation
Aging austenitic steels are characterized by a complex microstructure and various defects and precipitates, which largely determine the properties of steels. The formation and evolution of a system of defects in these materials are accompanied by changes in the Bragg and diffuse neutron scattering spectra. This makes neutron diffraction methods an effective means of studying them. This paper analyzes the results of our neutron diffraction experiments studying the changes in the crystal structure and a system of carbide precipitates in the 0.4C-4Cr-18Mn-2V austenitic manganese steel, which develop in the material under thermal aging and irradiation by fast neutron fluxes. Differences occurring under these effects are revealed. The results of the analysis are in good agreement with the electron microscopic data and supplement them in terms of studying irradiated samples.
- Open Access
- 1 December 2024
- Published by Pleiades Publishing Ltd in Physics of Metals and Metallography
- Vol. 125 (12) , 1495
Erratum to: Initiation of the Shape Memory Effect by Fast Neutron Irradiation
An Erratum to this paper has been published: https://doi.org/10.1134/S0031918X24120019
- 1 December 2024
- Published by Pleiades Publishing Ltd in Physics of Metals and Metallography
- Vol. 125 (12) , 1495
Open AccessErratum to: Initiation of the Shape Memory Effect by Fast Neutron Irradiation
An Erratum to this paper has been published: https://doi.org/10.1134/S0031918X24120019
- Open Access
- 1 October 2024
- Published by Institute of Engineering Science, Ural Branch RAS in Diagnostics, Resource and Mechanics of materials and structures
- Vol. 2024 (5) , 170-180
Spontaneous volume magnetostriction in antiferromagnets and its manifestation in an Fe–Rh alloy
A formula for spontaneous volume magnetostriction of a two-sublattice antiferromagnet is obtained and discussed in detail in terms of an exchange striction model. The main feature of the formula is taking into account the dependence of volumetric strains on the directions of sublattice magnetization vectors. The calculation shows that this way it is possible to explain giant forced volume magnetostriction previously observed in the antiferromagnetic state of the Fe50Rh50 alloy. Besides, the temperature dependences of the specific volume and critical magnetic field of this alloy are calculated, and they are in a satisfactory agreement with the experiment.
- 1 October 2024
- Published by Institute of Engineering Science, Ural Branch RAS in Diagnostics, Resource and Mechanics of materials and structures
- Vol. 2024 (5) , 170-180
Open AccessSpontaneous volume magnetostriction in antiferromagnets and its manifestation in an Fe–Rh alloy
A formula for spontaneous volume magnetostriction of a two-sublattice antiferromagnet is obtained and discussed in detail in terms of an exchange striction model. The main feature of the formula is taking into account the dependence of volumetric strains on the directions of sublattice magnetization vectors. The calculation shows that this way it is possible to explain giant forced volume magnetostriction previously observed in the antiferromagnetic state of the Fe50Rh50 alloy. Besides, the temperature dependences of the specific volume and critical magnetic field of this alloy are calculated, and they are in a satisfactory agreement with the experiment.
- 22 September 2024
- Published by The Russian Academy of Sciences in Физика металлов и металловедение
- Vol. 125 (2) , 229-235
Initiation of the Shape Memory Effect by Fast Neutron Irradiation
The band sample of austenitic steel 0.3C–13Cr–10Mn–3Si–1V was cold deformed to a shape of circular arc with a deflection of 3 mm and then irradiated by fast neutrons with a fluence of 6×1019 cm–2 in the vertical wet channel of the IVV-2M reactor at a temperature of 80 °C. This material belongs to the class of the stainless manganese austenitic steels with the shape memory effect (SME). The neutron irradiation was initially supposed to lower the SME upon the further heating in comparison with the reference sample. But instead, the SME appeared immediately under irradiation showing a decrease in the deflection of about 21 %. Check experiments confirmed that the lower limit of the SME in this material is 120 °C with its absence at 80 °C. This allows us to assert that the observed effect is the result of the neutron irradiation.
- 22 September 2024
- Published by The Russian Academy of Sciences in Физика металлов и металловедение
- Vol. 125 (2) , 229-235
Initiation of the Shape Memory Effect by Fast Neutron Irradiation
The band sample of austenitic steel 0.3C–13Cr–10Mn–3Si–1V was cold deformed to a shape of circular arc with a deflection of 3 mm and then irradiated by fast neutrons with a fluence of 6×1019 cm–2 in the vertical wet channel of the IVV-2M reactor at a temperature of 80 °C. This material belongs to the class of the stainless manganese austenitic steels with the shape memory effect (SME). The neutron irradiation was initially supposed to lower the SME upon the further heating in comparison with the reference sample. But instead, the SME appeared immediately under irradiation showing a decrease in the deflection of about 21 %. Check experiments confirmed that the lower limit of the SME in this material is 120 °C with its absence at 80 °C. This allows us to assert that the observed effect is the result of the neutron irradiation.
- Open Access
- 1 February 2024
- Published by Pleiades Publishing Ltd in Physics of Metals and Metallography
- Vol. 125 (2) , 211-216
Initiation of the Shape Memory Effect by Fast Neutron Irradiation
A sample made from a ribbon of austenitic-martensitic steel 0.3C–13Cr–10Mn–3Si–1V, pre-deformed in the shape of a circular arc with a deflection of 3 mm, was subjected to fast neutron irradiation with a fluence of 6 × 10 19 cm –2 in the vertical wet channel of the IVV-2M reactor at a temperature of 80°C. This material belongs to the class of stainless manganese austenitic steels with the shape memory effect (SME). Initially, it was expected that irradiation would reduce the SME magnitude after subsequent heating of the studied sample in comparison with the reference one. But instead, the manifestation of SME was revealed already after irradiation, with a decrease in the deflection by approximately 21%. Control experiments confirmed that the lower temperature limit for the manifestation of the SME in this material lies at 120ºC and is absent at 80°C. This allows us to conclude that the effect observed is the result of neutron irradiation.
- 1 February 2024
- Published by Pleiades Publishing Ltd in Physics of Metals and Metallography
- Vol. 125 (2) , 211-216
Open AccessInitiation of the Shape Memory Effect by Fast Neutron Irradiation
A sample made from a ribbon of austenitic-martensitic steel 0.3C–13Cr–10Mn–3Si–1V, pre-deformed in the shape of a circular arc with a deflection of 3 mm, was subjected to fast neutron irradiation with a fluence of 6 × 10 19 cm –2 in the vertical wet channel of the IVV-2M reactor at a temperature of 80°C. This material belongs to the class of stainless manganese austenitic steels with the shape memory effect (SME). Initially, it was expected that irradiation would reduce the SME magnitude after subsequent heating of the studied sample in comparison with the reference one. But instead, the manifestation of SME was revealed already after irradiation, with a decrease in the deflection by approximately 21%. Control experiments confirmed that the lower temperature limit for the manifestation of the SME in this material lies at 120ºC and is absent at 80°C. This allows us to conclude that the effect observed is the result of neutron irradiation.
- 1 May 2022
- Published by Springer Nature in Russian Physics Journal
- Vol. 65 (1) , 123-130
The Effect of Ion Irradiation (Аr+, E = 15−20 keV) on the Microstructure of the Deformed Ni – 13.9 wt.% W Alloy
- 1 May 2022
- Published by Springer Nature in Russian Physics Journal
- Vol. 65 (1) , 123-130
The Effect of Ion Irradiation (Аr+, E = 15−20 keV) on the Microstructure of the Deformed Ni – 13.9 wt.% W Alloy
- 1 June 2021
- Published by Institute of Engineering Science, Ural Branch RAS in Diagnostics, Resource and Mechanics of materials and structures
- Vol. 2021 (3) , 31-44
Neutron studies of the V-4Ti-4Cr alloy
Competitive economic indicators for fast-neuron power reactors can be achieved with high coefficients of fuel burnout, which requires remarkable enhancement of radiation resistance of fuel pin claddings. Nowadays, low-activation vanadium alloys are projected as promising fuel cladding materials in view of their high radiation and thermal resistance in wide temperature and damage dose ranges. Neutron diffraction and small-angle neutron scattering are employed to study the microstructure of the V-4Ti-4Cr alloy subjected to irradiation with fast neutrons in the fluence range up to 1·1020 cm−2. Minor phases precipitated in the system are structurally characterized. The applicability and prospects of neutron diffraction methods in terms of studying the radiation behavior of this kind of alloys are shown.
- 1 June 2021
- Published by Institute of Engineering Science, Ural Branch RAS in Diagnostics, Resource and Mechanics of materials and structures
- Vol. 2021 (3) , 31-44
Neutron studies of the V-4Ti-4Cr alloy
Competitive economic indicators for fast-neuron power reactors can be achieved with high coefficients of fuel burnout, which requires remarkable enhancement of radiation resistance of fuel pin claddings. Nowadays, low-activation vanadium alloys are projected as promising fuel cladding materials in view of their high radiation and thermal resistance in wide temperature and damage dose ranges. Neutron diffraction and small-angle neutron scattering are employed to study the microstructure of the V-4Ti-4Cr alloy subjected to irradiation with fast neutrons in the fluence range up to 1·1020 cm−2. Minor phases precipitated in the system are structurally characterized. The applicability and prospects of neutron diffraction methods in terms of studying the radiation behavior of this kind of alloys are shown.
- Open Access
- 1 May 2020
- Published by Institute of Engineering Science, Ural Branch RAS in Diagnostics, Resource and Mechanics of materials and structures
- No. 3,p. 47-60
On models for estimating the post-radiation defect state of the -phase
Processes that take place in the precipitates of -phase under irradiation with fast neutrons are topical and draw attention when one searches for ways of improving radiation resistance of structural reactor steels. A special feature of these processes is that the formation of vacancies and interstices proceeds at the background of a disordering of the initial crystal lattice, which mani-fests itself in the formation of antisite defects. X-ray and neutron diffraction techniques are efficient tools of studying changes that occur in the post-radiation structural state of such systems. However, interpretation of the experimental results calls for more complicated models for the description of structural effects exerted by accumulation of radiation defects in the material than those developed before for elementary metals. Several models are proposed in this paper.
- 1 May 2020
- Published by Institute of Engineering Science, Ural Branch RAS in Diagnostics, Resource and Mechanics of materials and structures
- No. 3,p. 47-60
Open AccessOn models for estimating the post-radiation defect state of the -phase
Processes that take place in the precipitates of -phase under irradiation with fast neutrons are topical and draw attention when one searches for ways of improving radiation resistance of structural reactor steels. A special feature of these processes is that the formation of vacancies and interstices proceeds at the background of a disordering of the initial crystal lattice, which mani-fests itself in the formation of antisite defects. X-ray and neutron diffraction techniques are efficient tools of studying changes that occur in the post-radiation structural state of such systems. However, interpretation of the experimental results calls for more complicated models for the description of structural effects exerted by accumulation of radiation defects in the material than those developed before for elementary metals. Several models are proposed in this paper.
- 1 August 2019
- Published by Institute of Engineering Science, Ural Branch RAS in Diagnostics, Resource and Mechanics of materials and structures
- No. 4,p. 6-15
ON THE SEARCH OF NEW MAGNETIC MATERIALS FOR CRYOGENICS
- 1 August 2019
- Published by Institute of Engineering Science, Ural Branch RAS in Diagnostics, Resource and Mechanics of materials and structures
- No. 4,p. 6-15
ON THE SEARCH OF NEW MAGNETIC MATERIALS FOR CRYOGENICS