SKSantosh Kapuria

Santosh Kapuria

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Santosh Kapuria has a total of 68 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Effect of Material Anisotropy on Time Reversibility of Lamb Waves

    by Bhabagrahi Natha Sharma, Santosh Kapuria, TESTIA GmbH, Aswin Haridas, Anikedh Suresh

    Composite structures are widely used in the aerospace industry as important load-carrying components due to their excellent performance. However, composite structures are susceptible to impact damage and manufacturing flaws, compelling the designers and airline operators to ensure continuous safety. Lamb wave-based techniques are gaining immense popularity for structural health monitoring (SHM) applications to detect internal and surface damage in thin-walled structures, such as aerospace structures, using embedded and surface-bonded transducers. The damage detection using Lamb waves conventionally relies on a comparison of the damage features of the current response with the baseline response previously obtained from the same structure in its pristine condition. However, the same Lamb wave features vary by a change in the operating temperature of the structure, leading to possible false alarms for damage. To overcome this problem, baseline-free damage detection methods have been pursued in the recent past. Among various techniques, the one based on the time-reversal process (TRP) of Lamb waves has emerged as the most promising candidate for damage detection in thin-walled structures. For a system of sensor arrays to be used for SHM following TRP of Lamb waves, it is essential that a single frequency should be used to probe the structure along all the paths of the sensor array and the time reversibility in an undamaged structure should be the same for all the paths. However, to the best of the author's knowledge, no study has reported how the layup configuration of a composite structure affects the time reversibility of Lamb waves in different paths of a sensor array. The present work aims to numerically study the effect of the layup configuration of the composite structure on the time reversibility of the Lamb waves. The numerical study is conducted using three-dimensional (3D) finite element (FE) simulation in CIVA, which uses a transient spectral finite element. The simulation is conducted on two configurations of composites, namely, quasi-isotropic and cross-ply. A composite plate of 2 mm thickness with 16 laminae of 0.125 mm thickness each is considered. Five transducer locations are considered on each plate in such a way that one transducer (T1) is located at the center and others (T2, T3, T4, and T5) are located on a quarter circle of radius 200 mm. The transducer system constitutes four paths T1-T2, T1-T3, T1-T4, T1-T5 which makes 0°, 22.5°, 45°, and 90° to the global x-axis of the system. The simulation is conducted by first actuating the transducer T1 with a 5-cycle tone burst signal and emitting back the time-reversed version of the response obtained at T2. Then, the normalized version of the reconstructed signal obtained at T1 is compared with the normalized version of the input signal to quantify the degree of the Lamb wave reconstruction. The simulation is being repeated for all the paths and for both plate configurations. The result shows that while in the case of a quasi-isotropic configuration, the variation of the quality of time reversibility obtained for different paths is minimal. Its variation in the case of cross-ply laminate is significant.

  • Numerical Dispersion of Local‐Domain Trigonometric Function‐Enriched Finite Elements for Wave Propagation Analysis

    by Amit Kumar, Prashant Gaurav, Santosh Kapuria

    This paper presents the numerical dispersion analysis of a recently developed local‐domain‐enriched finite element (LEFE) for wave propagation problems. LEFE enriches standard finite element interpolations with trigonometric functions defined in the element domain, which satisfy the partition of unity and vanish at the nodes. A formulation is developed to determine numerical dispersion errors from spatial and temporal discretizations, with explicit expressions derived for the characteristic equation linking numerical phase velocity to the non‐dimensional wavenumber and Courant‐Friedrichs‐Lewy (CFL) number. Based on this, a sampling theorem is established to estimate optimal element size and time step for accurate analysis. Results show that LEFE with one and two enrichment terms requires 9‐ and 18‐times fewer elements per wavelength than the conventional finite element method (FEM) and significantly outperforms the other existing enriched elements. Unlike the latter elements, LEFE exhibits a monotonic reduction in combined dispersion error with decreasing CFL number. Further, it produces a unique relation between the total‐to‐spatial dispersion ratio and the product of element size, wavenumber, and CFL number, enabling a generalized time‐step criterion. LEFE achieves 7‐18‐fold reductions in degrees of freedom (DOFs) and 24350‐fold reductions in computational time compared to standard FEM, demonstrating its high accuracy and efficiency in simulating high‐frequency narrowband and broadband wave propagation.


  • Open Access

    Experimentally Derived Weight Distribution Function for Probabilistic Damage Imaging Using Guided Waves

    by Souvik Jana, Santosh Kapuria

    The reconstruction algorithm for probabilistic inspection of defects (RAPID) is widely employed to localize damage in thin-walled structures using guided waves. This method constructs probabilistic damage maps using damage indices (DIs) of the sensing paths in a sensor network and associated weight distribution functions (WDFs). Accurate weight distribution function (WDF) estimation is crucial for determining the probability of dam- age at a given point. Several WDFs have been proposed, including linear, Gaussian, and inverse power law functions, but they rely on assumptions without any experimental validation. We experimentally determine the WDF as the ratio of the DIs of a sensing path due to damage at a given point to its value when the damage is situated on the sensing path orthogonal to that point. Results reveal that the experimentally obtained variation of the damage index ratio does not conform to any of the existing WDF models for either baseline-based or baseline-free methods. Based on experimental data, we propose a simple exponential decay-type WDF, which is shown to be applicable for baseline-based methods and baseline-free refined time reversal method (RTRM) (developed by the second authors group). Thus, the newly proposed WDF provides an accurate estimate of damage probability for both baseline-based methods and the baseline-free RTRM.

  • Open Access

    Actuation Model for Lamb Wave Excitation in Composite Plates Using Piezoelectric- Flexoelectric Actuators

    by Suraj Kumar Rout, Santosh Kapuria

    Among various SHM techniques, guide-wave-based methods are mostly explored for their effectiveness in damage detection. However, despite the growing interest in this area, no analytical models have been developed to date for the actuation of Lamb waves in composite structures using piezoelectric and flexoelectric transducers. This article develops a theoretical model for actuation of composite plates using physically modeled adhesively bonded piezoelectric-flexoelectric transducers. The model incorporates both interfacial shear and peel stresses at the interface of the actuator and host composite laminate. The tractions induced by the actuator onto the plate surface are determined by modeling the actuator and the laminated plate as Mindlin plates. The formulation results in a seventh-order differential equation for the interfacial shear stress, which is solved in closed form by satisfying stress-free boundary conditions at the actuator and plate edges. The peel stress is subsequently determined from the differential relation in terms of the interfacial shear stress. For validation, the longitudinal distributions of interfacial shear and peel stresses are compared with the ABAQUS’ continuum-based finite element results. A comprehensive numerical study has been performed to demonstrate the effect of adhesive and host laminate thickness on the distributions of interfacial shear stress and its peak amplitude.10.12783/shm2025/37295

  • Lamb wave-based baseline-free damage localization in pipes with surface-mounted piezo patches

    by M Kannusamy, Santosh Kapuria, Saptarshi Sasmal

    This study presents a baseline-free damage localization technique for pipelines by extending a recently developed virtual refined time-reversal method (VRTRM) based on Lamb waves while employing the reconstruction algorithm for probabilistic inspection of defects (RAPID) for damage imaging. A network of piezoelectric patch transducers surface-bonded to the pipe is deployed for detecting damage without requiring prior baseline data. The proposed approach is first established through finite element simulations of guided wave propagation in a metallic pipe and then experimentally demonstrated on a pipeline under various damage scenarios: single, dual, and multiple defects. Results indicate that applying VRTRM at the best reconstruction frequency–specific to the sensor network-adhesive-pipe system– yields highly accurate damage localization. In contrast, the conventional time-reversal method using arbitrarily selected frequencies results in poor or inaccurate predictions. The proposed method offers a highly promising baseline-free solution for damage localization in pipeline structures with built-in transducers.