Ivan Gladich
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ivan Gladich has a total of 186 co-authors. Here are the top co-authors by number of shared publications:
- Markus Ammann
PSI Center for Energy and Environmental Sciences, Paul Scherrer Institute PSI, Villigen, Switzerland
11 shared publications - Joseph S. Francisco
Department of Earth and Environmental Science, University of Pennsylvania, Philadelphia, USA
9 shared publications - Luca Artiglia
Paul Scherrer Institute
8 shared publications - Alessandro Sinopoli
Department of Chemical, Biological, Pharmaceutical and Environmental Sciences University of Messina Messina Italy
7 shared publications - Marcelo Andrés Carignano
Northwestern University
7 shared publications - Erik Schurch Thomson
Department of Chemistry and Molecular Biology, University of Gothenburg, Gothenburg, Sweden
6 shared publications
Latest Publications
- 14 November 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 129 (47) , 10962-10971
Before We Inject: Assessing the Impact of Silica-Based Aerosols on Stratospheric Chemistry via a Kinetic Model Informed by Molecular Dynamics
Stratospheric aerosol injection (SAI) has been proposed as a geoengineering strategy to mitigate global warming by increasing Earth's albedo. Silica-based materials, such as diamond-doped silica aerogels, have shown promising optical properties, but their impact on stratospheric chemistry, ozone one in particular, remains largely unknown. Here, we present first-principles molecular dynamics (MD) simulations of the heterogeneous reaction between hydrogen chloride (HCl) and chlorine nitrate (ClONO2), two main reservoirs of stratospheric chlorine and nitrogen species, on a dry and hydroxylated α-quartz silica interface, a surface that serves as a proxy for silica-based aerosols under low relative humidity and stratospheric conditions. Our results reveal a barrierless reaction pathway toward the formation of chlorine gas (Cl2), a major contributor to stratospheric ozone loss. We design a heterogeneous kinetic model informed by our MD simulation and available experimental data: despite the barrierless formation of Cl2, the higher surface affinities and partial pressures of HNO3 and HCl compared to those of ClONO2 result in a negligible reaction probability, , upon chlorine nitrate collision with the silica surface. Since enters as a proportionality constant in the definition of the heterogeneous reaction rate, our kinetic model indicates that the injection of silica-based aerosols may have only a limited impact on stratospheric ozone depletion driven by HCl and ClONO2 chemistry. At the same time, our findings also underscore the scarcity of experimental data, the need of better theoretical frameworks for the inclusion of MD results into kinetic models, and the urgency for further experimental validations of silica-based SAI technologies before their deployment in climate intervention strategies.- 14 November 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 129 (47) , 10962-10971
Before We Inject: Assessing the Impact of Silica-Based Aerosols on Stratospheric Chemistry via a Kinetic Model Informed by Molecular Dynamics
Stratospheric aerosol injection (SAI) has been proposed as a geoengineering strategy to mitigate global warming by increasing Earth's albedo. Silica-based materials, such as diamond-doped silica aerogels, have shown promising optical properties, but their impact on stratospheric chemistry, ozone one in particular, remains largely unknown. Here, we present first-principles molecular dynamics (MD) simulations of the heterogeneous reaction between hydrogen chloride (HCl) and chlorine nitrate (ClONO2), two main reservoirs of stratospheric chlorine and nitrogen species, on a dry and hydroxylated α-quartz silica interface, a surface that serves as a proxy for silica-based aerosols under low relative humidity and stratospheric conditions. Our results reveal a barrierless reaction pathway toward the formation of chlorine gas (Cl2), a major contributor to stratospheric ozone loss. We design a heterogeneous kinetic model informed by our MD simulation and available experimental data: despite the barrierless formation of Cl2, the higher surface affinities and partial pressures of HNO3 and HCl compared to those of ClONO2 result in a negligible reaction probability, , upon chlorine nitrate collision with the silica surface. Since enters as a proportionality constant in the definition of the heterogeneous reaction rate, our kinetic model indicates that the injection of silica-based aerosols may have only a limited impact on stratospheric ozone depletion driven by HCl and ClONO2 chemistry. At the same time, our findings also underscore the scarcity of experimental data, the need of better theoretical frameworks for the inclusion of MD results into kinetic models, and the urgency for further experimental validations of silica-based SAI technologies before their deployment in climate intervention strategies.- Open Access
- 6 October 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (41) , 49168-49182
Synergistic Effect of Group 9 Metals on the Performance of Hydrotalcite-Derived Ni Catalysts for Methane Dry Reforming
Dry reforming of methane (DRM) offers an efficient pathway for the simultaneous utilization of CO2 and CH4, two of the most impactful greenhouse gases, through their conversion into valuable synthesis gas. Nevertheless, the practical deployment of DRM remains challenged by catalyst deactivation, predominantly caused by carbon accumulation and metal sintering. In this work, we explore the impact of group 9 metal promoters, specifically iridium (Ir), cobalt (Co), and rhodium (Rh), on the catalytic behavior and stability of nickel-based materials derived from hydrotalcite precursors. The catalysts were synthesized via a coprecipitation method and thoroughly characterized using a combination of structural, morphological, and surface analytical techniques, alongside hydrogen temperature-programmed reduction (H2-TPR) and temperature-programmed desorption analyses for CO2 (CO2-TPD) and NH3 (NH3-TPD). Catalytic testing was conducted at 750 °C over a 20-h period. The addition of Ir and Rh was found to markedly enhance Ni dispersion, strengthen metal-support interactions, and increase the abundance of strong basic sites, all contributing to reduced carbon formation. Among the catalysts, NiHT-Ir demonstrated the highest stability and activity, maintaining CH4 and CO2 conversions above 80% with minimal deactivation. NiHT-Rh similarly exhibited excellent catalytic performance and coke resistance. By contrast, NiHT-Co showed a decline in performance associated with severe Ni sintering, while the monometallic NiHT catalyst suffered rapid deactivation. Post-reaction analyses confirmed that Ir and Rh effectively limited coke deposition and metal aggregation, whereas Co promoted Ni particle growth. Density functional theory (DFT) calculations were carried out to elucidate the variations in adsorption behavior of CH4 and CO2 across the different catalyst surfaces. This study underscores the beneficial role of group 9 metals, particularly Ir and Rh, in enhancing the catalytic efficiency, stability, and resistance to the deactivation of hydrotalcite-derived Ni-based catalysts for DRM.
- 6 October 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (41) , 49168-49182
Open AccessSynergistic Effect of Group 9 Metals on the Performance of Hydrotalcite-Derived Ni Catalysts for Methane Dry Reforming
Dry reforming of methane (DRM) offers an efficient pathway for the simultaneous utilization of CO2 and CH4, two of the most impactful greenhouse gases, through their conversion into valuable synthesis gas. Nevertheless, the practical deployment of DRM remains challenged by catalyst deactivation, predominantly caused by carbon accumulation and metal sintering. In this work, we explore the impact of group 9 metal promoters, specifically iridium (Ir), cobalt (Co), and rhodium (Rh), on the catalytic behavior and stability of nickel-based materials derived from hydrotalcite precursors. The catalysts were synthesized via a coprecipitation method and thoroughly characterized using a combination of structural, morphological, and surface analytical techniques, alongside hydrogen temperature-programmed reduction (H2-TPR) and temperature-programmed desorption analyses for CO2 (CO2-TPD) and NH3 (NH3-TPD). Catalytic testing was conducted at 750 °C over a 20-h period. The addition of Ir and Rh was found to markedly enhance Ni dispersion, strengthen metal-support interactions, and increase the abundance of strong basic sites, all contributing to reduced carbon formation. Among the catalysts, NiHT-Ir demonstrated the highest stability and activity, maintaining CH4 and CO2 conversions above 80% with minimal deactivation. NiHT-Rh similarly exhibited excellent catalytic performance and coke resistance. By contrast, NiHT-Co showed a decline in performance associated with severe Ni sintering, while the monometallic NiHT catalyst suffered rapid deactivation. Post-reaction analyses confirmed that Ir and Rh effectively limited coke deposition and metal aggregation, whereas Co promoted Ni particle growth. Density functional theory (DFT) calculations were carried out to elucidate the variations in adsorption behavior of CH4 and CO2 across the different catalyst surfaces. This study underscores the beneficial role of group 9 metals, particularly Ir and Rh, in enhancing the catalytic efficiency, stability, and resistance to the deactivation of hydrotalcite-derived Ni-based catalysts for DRM.
- Open Access
- 16 July 2025
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (32) , 17008-17018
Surface migration of chloride ions on natural salts by ammonia and water vapor under low RH conditions
Exposure of natural salt particles to ammonia under low relative humidity drives chloride ion migration to the surface, outcompeting sulfate and indicating potential dechlorination.
- 16 July 2025
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (32) , 17008-17018
Open AccessSurface migration of chloride ions on natural salts by ammonia and water vapor under low RH conditions
Exposure of natural salt particles to ammonia under low relative humidity drives chloride ion migration to the surface, outcompeting sulfate and indicating potential dechlorination.
- Open Access
Impact of thermal treatment on halloysite nanotubes: A combined experimental-computational approach
- Open Access
- 18 October 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-8
Direct observation of the complex S(IV) equilibria at the liquid-vapor interface
The multi-phase oxidation of S(IV) plays a crucial role in the atmosphere, leading to the formation of haze and severe pollution episodes. We here contribute to its understanding on a molecular level by reporting experimentally determined pKa values of the various S(IV) tautomers and reaction barriers for SO2 formation pathways. Complementary state-of-the-art molecular-dynamics simulations reveal a depletion of bisulfite at low pH at the liquid-vapor interface, resulting in a different tautomer ratio at the interface compared to the bulk. On a molecular-scale level, we explain this with the formation of a stable contact ion pair between sulfonate and hydronium ions, and with the higher energetic barrier for the dehydration of sulfonic acid at the liquid-vapor interface. Our findings highlight the contrasting physicochemical behavior of interfacial versus bulk environments, where the pH dependence of the tautomer ratio reported here has a significant impact on both SO2 uptake kinetics and reactions involving NOx and H2O2 at aqueous aerosol interfaces.
- 18 October 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-8
Open AccessDirect observation of the complex S(IV) equilibria at the liquid-vapor interface
The multi-phase oxidation of S(IV) plays a crucial role in the atmosphere, leading to the formation of haze and severe pollution episodes. We here contribute to its understanding on a molecular level by reporting experimentally determined pKa values of the various S(IV) tautomers and reaction barriers for SO2 formation pathways. Complementary state-of-the-art molecular-dynamics simulations reveal a depletion of bisulfite at low pH at the liquid-vapor interface, resulting in a different tautomer ratio at the interface compared to the bulk. On a molecular-scale level, we explain this with the formation of a stable contact ion pair between sulfonate and hydronium ions, and with the higher energetic barrier for the dehydration of sulfonic acid at the liquid-vapor interface. Our findings highlight the contrasting physicochemical behavior of interfacial versus bulk environments, where the pH dependence of the tautomer ratio reported here has a significant impact on both SO2 uptake kinetics and reactions involving NOx and H2O2 at aqueous aerosol interfaces.
- Open Access
- 17 October 2024
- Published by American Chemical Society (ACS) in ACS ES&T Air
- Vol. 1 (11) , 1373-1382
Formation of Sodium Chloride on the Surface of Sulfate-Rich Gobi Desert Salt in Response to Water Adsorption
Dust storms in arid regions transport desert salts and dust, affecting geochemical processes, atmospheric chemistry, climate, and human health. This study examines how the gas-salt interface composition of desert salt changes with varying relative humidity (RH), using ambient pressure X-ray photoelectron spectroscopy (APXPS), near-edge X-ray absorption fine structure (NEXAFS) spectroscopy, and molecular dynamics (MD) simulations. Ion chromatography analysis of desert salt indicates it is predominantly composed of sulfate, sodium, and magnesium ions, with traces of calcium, chloride, nitrate, and potassium ions. APXPS and NEXAFS surface analyses show that, at 0% RH, the gas-salt interface primarily features Na2SO4, with smaller amounts of MgSO4 and a trace of NaCl on the top layers. As humidity increases, the composition at the gas-salt interface changes, notably with Mg2+ binding to SO4 2- ions and a dominant NaCl formation throughout the studied surface depth. This shift indicates a transition from a sulfate- to a chloride-rich surface as humidity increases, contradicting MD simulations that predicted that on salt crystals covered by a submonolayer of water with electrolytes, chloride ions migrate toward the liquid-solid interface. This discrepancy indicates that other factors, like enhanced ionic mobility at grain boundaries, might drive the accumulation of chloride ions at the gas interface. The study emphasizes the crucial role of adsorbed water in ion migration and surface composition transformation of desert salts, affecting geochemical processes in arid regions.
- 17 October 2024
- Published by American Chemical Society (ACS) in ACS ES&T Air
- Vol. 1 (11) , 1373-1382
Open AccessFormation of Sodium Chloride on the Surface of Sulfate-Rich Gobi Desert Salt in Response to Water Adsorption
Dust storms in arid regions transport desert salts and dust, affecting geochemical processes, atmospheric chemistry, climate, and human health. This study examines how the gas-salt interface composition of desert salt changes with varying relative humidity (RH), using ambient pressure X-ray photoelectron spectroscopy (APXPS), near-edge X-ray absorption fine structure (NEXAFS) spectroscopy, and molecular dynamics (MD) simulations. Ion chromatography analysis of desert salt indicates it is predominantly composed of sulfate, sodium, and magnesium ions, with traces of calcium, chloride, nitrate, and potassium ions. APXPS and NEXAFS surface analyses show that, at 0% RH, the gas-salt interface primarily features Na2SO4, with smaller amounts of MgSO4 and a trace of NaCl on the top layers. As humidity increases, the composition at the gas-salt interface changes, notably with Mg2+ binding to SO4 2- ions and a dominant NaCl formation throughout the studied surface depth. This shift indicates a transition from a sulfate- to a chloride-rich surface as humidity increases, contradicting MD simulations that predicted that on salt crystals covered by a submonolayer of water with electrolytes, chloride ions migrate toward the liquid-solid interface. This discrepancy indicates that other factors, like enhanced ionic mobility at grain boundaries, might drive the accumulation of chloride ions at the gas interface. The study emphasizes the crucial role of adsorbed water in ion migration and surface composition transformation of desert salts, affecting geochemical processes in arid regions.
- Open Access
- 7 October 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (44) , 30729-30742
Understanding the swelling behavior of Ti 3 C 2 T x MXene membranes in aqueous media
Two-dimensional (2D) lamellar MXene membranes have demonstrated ultrafast water permeance and outstanding ion rejection performance, thus showing great potential for water purification.
- 7 October 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (44) , 30729-30742
Open AccessUnderstanding the swelling behavior of Ti 3 C 2 T x MXene membranes in aqueous media
Two-dimensional (2D) lamellar MXene membranes have demonstrated ultrafast water permeance and outstanding ion rejection performance, thus showing great potential for water purification.
- 24 June 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (26) , 17898-17907
Water-Catalyzed Formation of Reactive Oxygen Species from NO2 on a Weakly Hydrated Calcite Surface
The interfaces of weakly hydrated mineral substrates have been shown to serve as catalytic sites for chemical reactions that may not be accessible in the gas phase or under bulk conditions. Currently known mechanisms for the formation of reactive oxygen species (ROS) from nitrogen dioxide (NO2) involve NO2 dimerization. Here, we report the formation of the ROS HONO via a mechanism involving simple adsorption of a single NO2 molecule on a weakly hydrated calcite substrate. First-principles molecular dynamics simulations coupled with enhanced sampling techniques show how an adsorbed water sublayer can enhance NO2 adsorption on calcite compared to adsorption on a bare dry substrate. On the weakly hydrated calcite surface, an interfacial electric field facilitates proton extraction from water, thus allowing HONO formation from a single adsorbed NO2, i.e., without the need for the formation of a NO2 dimer precomplex. HONO formation on calcite is kinetically more favorable than that in the gas phase, with a reaction barrier of 14 kcal/mol on the weakly hydrated calcite surface compared to 27 kcal/mol in the gas phase. Further photocatalysed HONO production by visible light and HONO dissociation are hampered on calcite, unlike the process on silica. NO2 is a significant anthropogenic pollutant, and understanding its chemistry is crucial for explaining the high ROS levels and haze formation in polluted areas or prebiotic ROS generation. These findings emphasize how mineral substrates under water-restricted hydration conditions can trigger chemical pathways that are unexpected in the gas phase or under bulk conditions.
- 24 June 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (26) , 17898-17907
Water-Catalyzed Formation of Reactive Oxygen Species from NO2 on a Weakly Hydrated Calcite Surface
The interfaces of weakly hydrated mineral substrates have been shown to serve as catalytic sites for chemical reactions that may not be accessible in the gas phase or under bulk conditions. Currently known mechanisms for the formation of reactive oxygen species (ROS) from nitrogen dioxide (NO2) involve NO2 dimerization. Here, we report the formation of the ROS HONO via a mechanism involving simple adsorption of a single NO2 molecule on a weakly hydrated calcite substrate. First-principles molecular dynamics simulations coupled with enhanced sampling techniques show how an adsorbed water sublayer can enhance NO2 adsorption on calcite compared to adsorption on a bare dry substrate. On the weakly hydrated calcite surface, an interfacial electric field facilitates proton extraction from water, thus allowing HONO formation from a single adsorbed NO2, i.e., without the need for the formation of a NO2 dimer precomplex. HONO formation on calcite is kinetically more favorable than that in the gas phase, with a reaction barrier of 14 kcal/mol on the weakly hydrated calcite surface compared to 27 kcal/mol in the gas phase. Further photocatalysed HONO production by visible light and HONO dissociation are hampered on calcite, unlike the process on silica. NO2 is a significant anthropogenic pollutant, and understanding its chemistry is crucial for explaining the high ROS levels and haze formation in polluted areas or prebiotic ROS generation. These findings emphasize how mineral substrates under water-restricted hydration conditions can trigger chemical pathways that are unexpected in the gas phase or under bulk conditions.
- Open Access
- 26 December 2023
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (1) , 771-780
Addressing the Effectiveness and Molecular Mechanism of the Catalytic CO2 Hydration in Aqueous Solutions by Nickel Nanoparticles
Hydration of carbon dioxide in water solution is the rate limiting step for the CO2 mineralization process, a process which is at the base of many carbon capture and utilization (CCU) technologies aiming to convert carbon dioxide to added-value products and mitigate climate change. Here, we present a combined experimental and computational study to clarify the effectiveness and molecular mechanism by which nickel nanoparticles, NiNPs, may enhance CO2 hydration in aqueous solutions. Contrary to previous literature, our kinetic experiments recording changes of pHs, conductivity, and dissolved carbon dioxide in solution reveal a minimal effect of the NiNPs in catalyzing CO2 hydration. Our atomistic simulations indicate that the Ni metal surface can coordinate only a limited number of water molecules, leaving uncoordinated metal sites for the binding of carbon dioxide or other cations in solution. This deactivates the catalyst and limits the continuous re-formation of a hydroxyl-decorated surface, which was a key chemical step in the previously suggested Ni-catalyzed hydration mechanism of carbon dioxide in aqueous solutions. At our experimental conditions, which expand the investigation of NiNP applicability toward a wider range of scenarios for CCU, NiNPs show a limited catalytic effect on the rate of CO2 hydration. Our study also highlights the importance of the solvation regime: while Ni surfaces may accelerate carbon dioxide hydration in water restricted environments, it may not be the case in fully hydrated conditions.
- 26 December 2023
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (1) , 771-780
Open AccessAddressing the Effectiveness and Molecular Mechanism of the Catalytic CO2 Hydration in Aqueous Solutions by Nickel Nanoparticles
Hydration of carbon dioxide in water solution is the rate limiting step for the CO2 mineralization process, a process which is at the base of many carbon capture and utilization (CCU) technologies aiming to convert carbon dioxide to added-value products and mitigate climate change. Here, we present a combined experimental and computational study to clarify the effectiveness and molecular mechanism by which nickel nanoparticles, NiNPs, may enhance CO2 hydration in aqueous solutions. Contrary to previous literature, our kinetic experiments recording changes of pHs, conductivity, and dissolved carbon dioxide in solution reveal a minimal effect of the NiNPs in catalyzing CO2 hydration. Our atomistic simulations indicate that the Ni metal surface can coordinate only a limited number of water molecules, leaving uncoordinated metal sites for the binding of carbon dioxide or other cations in solution. This deactivates the catalyst and limits the continuous re-formation of a hydroxyl-decorated surface, which was a key chemical step in the previously suggested Ni-catalyzed hydration mechanism of carbon dioxide in aqueous solutions. At our experimental conditions, which expand the investigation of NiNP applicability toward a wider range of scenarios for CCU, NiNPs show a limited catalytic effect on the rate of CO2 hydration. Our study also highlights the importance of the solvation regime: while Ni surfaces may accelerate carbon dioxide hydration in water restricted environments, it may not be the case in fully hydrated conditions.
- Open Access
- 18 December 2023
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 159 (23)
Uptake and reactivity of NO2 on the hydroxylated silica surface: A source of reactive oxygen species
We report state-of-the-art first-principles molecular dynamics results on the heterogeneous chemical uptake of NO2, a major anthropogenic pollutant, on the dry and wet hydroxylated surface of α-quartz, which is a significant component of silica-based catalysts and atmospheric dust aerosols. Our investigation spotlights an unexpected chemical pathway by which NO2 (i) can be adsorbed as HONO by deprotonation of interfacial silanols (i.e., –Si–OH group) on silica, (ii) can be barrierless converted to nitric acid, and (iii) can finally dissociated to surface bounded NO and hydroxyl gas phase radicals. This chemical pathway does not invoke any previously experimentally postulated NO2 dimerization, dimerization that is less likely to occur at low NO2 concentrations. Moreover, water significantly catalyzes the HONO formation and the dissociation of nitric acid into surface-bounded NO and OH radicals, while visible light adsorption can further promote these chemical transformations. This work highlights how water-restricted solvation regimes on common mineral substrates are likely to be a source of reactive oxygen species, and it offers a theoretical framework for further and desirable experimental efforts, aiming to better constrain trace gases/mineral interactions at different relative humidity conditions.
- 18 December 2023
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 159 (23)
Open AccessUptake and reactivity of NO2 on the hydroxylated silica surface: A source of reactive oxygen species
We report state-of-the-art first-principles molecular dynamics results on the heterogeneous chemical uptake of NO2, a major anthropogenic pollutant, on the dry and wet hydroxylated surface of α-quartz, which is a significant component of silica-based catalysts and atmospheric dust aerosols. Our investigation spotlights an unexpected chemical pathway by which NO2 (i) can be adsorbed as HONO by deprotonation of interfacial silanols (i.e., –Si–OH group) on silica, (ii) can be barrierless converted to nitric acid, and (iii) can finally dissociated to surface bounded NO and hydroxyl gas phase radicals. This chemical pathway does not invoke any previously experimentally postulated NO2 dimerization, dimerization that is less likely to occur at low NO2 concentrations. Moreover, water significantly catalyzes the HONO formation and the dissociation of nitric acid into surface-bounded NO and OH radicals, while visible light adsorption can further promote these chemical transformations. This work highlights how water-restricted solvation regimes on common mineral substrates are likely to be a source of reactive oxygen species, and it offers a theoretical framework for further and desirable experimental efforts, aiming to better constrain trace gases/mineral interactions at different relative humidity conditions.