RMRyan R. McShane

Ryan R. McShane

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Ryan R. McShane has a total of 87 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Spatial and temporal drivers of variability in abundance of two stream fishes

    by Richard H. Walker, Robert Mollenhauer, Ryan R. McShane, Cheryl Eddy-Miller, Annika Walters

    An understanding of how and why animal populations vary in space and time informs effective conservation and management. We used spatial and temporal flow metrics to explore flow-ecology relationships for two fish species, Mountain Sucker Pantosteus platyrhynchus (Cope, 1874) and Mottled Sculpin Cottus bairdii Girard, 1850, across 64 sites and 8 years in Wyoming, U.S.A. We found variation in Mottled Sculpin and Mountain Sucker abundance was driven to a greater extent by spatial flow metrics (e.g., drainage area, median summer flow) with differing direction of response between species. The opposing responses to spatial variation in median summer flow could reflect the ability of Mountain Sucker to persist in non-perennial habitats, likely due to their relatively high mobility and recolonization capacity. Responses to temporal flow metrics (e.g., previous year spring flow, previous year autumn flow) were weaker but consistent across species likely due to similar reproductive strategies and timing. The lack of stronger flow effects on population variability in both species likely corresponds to high variability in local habitat characteristics that are mediating population response. These findings underscore how considering spatial context informs conservation planning and suggest that flow-ecology relationships may be mediated by species-specific traits and local habitat conditions.

  • Open Access

    Machine Learning Generated Streamflow Drought Forecasts for the Conterminous United States (CONUS): Developing and Evaluating an Operational Tool to Enhance Sub-seasonal to Seasonal Streamflow Drought Early Warning for Gaged Locations

    by John C Hammond, Phillip Goodling, Jeremy Diaz, Hayley Rikert Corson-Dosch, Aaron Heldmyer, Scott Hamshaw, Ryan McShane, Jesse C Ross, Roy Sando, Caelan Simeone, et al.

    Forecasts of streamflow drought, when streamflow declines below typical levels, are notably less available than for floods or meteorological drought, despite widespread impacts. To address this gap, we apply machine learning (ML) models to forecast streamflow drought 1-13 weeks into the future at > 3,000 streamgage locations across the conterminous United States (CONUS). We applied two ML methods (Long short-term memory (LSTM) neural networks; Light Gradient-Boosting Machine - LightGBM) and two benchmark model approaches (persistence; Autoregressive Integrated Moving Average - ARIMA) to predict weekly streamflow percentiles with independent models for each forecast horizon. To explore whether a training focus on dry weeks improved performance, both ML models were trained using all percentiles (LSTM-all, LightGBM-all) and only percentiles below 30% (LSTM<30, LightGBM<30). We evaluated model performance regionally and nationally for drought occurrence (the classification performance for a future date) and for drought onset/termination (performance identifying drought starts and ends). ML models generally performed worse than the persistence model for discrete classification (moderate, severe, extreme drought) of drought occurrence but exceeded the benchmark models for onset/termination. ML models outperformed benchmarks in predicting continuous streamflow percentiles below 30%. Occurrence performance was better for less intense droughts and shorter forecast horizons, with the ML models having predictive power at 1-4 week horizons for severe droughts (10th percentile threshold). All models struggled to forecast onset, though the best ML model was the LSTM<30 (sensitivity of 22%). Termination performance was greater, with the drought termination performance greatest for the LightGBM-all model. When estimating model uncertainty, the LSTM<30 model had the narrowest 90% percentile interval with closest to optimal capture. This work highlights the challenges and opportunities to further advance hydrological drought forecasting and supports an experimental operational streamflow drought assessment and forecast tool.


  • Open Access

    Beyond Streamflow: Call for a National Data Repository of Streamflow Presence for Streams and Rivers in the United States

    by Kristin L. Jaeger, Konrad C. Hafen, Jason B. Dunham, Ken M. Fritz, Stephanie K. Kampf, Theodore B. Barnhart, Kendra E. Kaiser, Roy Sando, Sherri L. Johnson, Ryan R. McShane, et al.

    Observations of the presence or absence of surface water in streams are useful for characterizing streamflow permanence, which includes the frequency, duration, and spatial extent of surface flow in streams and rivers. Such data are particularly valuable for headwater streams, which comprise the vast majority of channel length in stream networks, are often non-perennial, and are frequently the most data deficient. Datasets of surface water presence exist across multiple data collection groups in the United States but are not well aligned for easy integration. Given the value of these data, a unified approach for organizing information on surface water presence and absence collected by diverse surveys would facilitate more effective and broad application of these data and address the gap in streamflow data in headwaters. In this paper, we highlight the numerous existing datasets on surface water presence in headwater streams, including recently developed crowdsourcing approaches. We identify the challenges of integrating multiple surface water presence/absence datasets that include differences in the definitions and categories of streamflow status, data collection method, spatial and temporal resolution, and accuracy of geographic location. Finally, we provide a list of critical and useful components that could be used to integrate different streamflow permanence datasets.


  • Estimates of water use associated with continuous oil and gas development in the Permian Basin, Texas and New Mexico, 2010–19, with comparisons to the Williston Basin, North Dakota and Montana

    by Natalie A. Houston, Grady P. Ball, Amy E. Galanter, Joshua F. Valder, Ryan R. McShane, Joanna N. Thamke, Jeremy S. McDowell

    First posted October 27, 2021 Director, Oklahoma-Texas Water Science Center U.S. Geological Survey 1505 Ferguson Lane Austin, TX 78754–4501 Contact Pubs Warehouse The Permian Basin, in west Texas and southeastern New Mexico is one of the largest conventional oil and gas reservoirs in the United States and is becoming one of the world’s largest continuous oil and gas (COG) reservoirs. Advances in technology have enabled oil and gas to be extracted from reservoirs that historically were developed using conventional, or vertical, well drilling techniques. Conventional oil and gas reservoirs have discrete deposits that are well defined and are typically trapped by an overlying geologic formation or caprock, whereas COG reservoirs contain deposits that are distributed evenly throughout the geologic formation, typically have much lower permeability (the capacity of a porous rock to transmit a fluid) than the con­ventional deposits, and require specialized horizontal extraction techniques. The methods to extract the oil from the two different reservoirs require differing amounts of water, and the horizontal extraction methods typically require substantially more water. In 2015, the U.S. Geological Survey started a topical study to quantify water used during COG development. The Permian Basin, which contains both types of reservoirs (continuous and conventional), was the second basin in the United States in the U.S. Geological Survey’s topical study to quantify water used during COG development.


  • A machine learning approach to modeling streamflow with sparse data in ungaged watersheds on the Wyoming Range, Wyoming, 2012–17

    by Ryan R. McShane, Cheryl A. Eddy-Miller

    Scant availability of streamflow data can impede the utility of streamflow as a variable in ecological models of aquatic and terrestrial species, especially when studying small streams in watersheds that lack streamgages. Streamflow data at fine resolution and broad extent were needed by collaborators for ecological research on small streams in several ungaged watersheds of southwestern Wyoming, where streamflow data are sparse.To improve the utility of sparse streamflow data to ecological research in ungaged watersheds, we developed a machine learning approach in R for modeling spatially and temporally continuous monthly streamflow from 2012 through 2017 in three semiarid montane-steppe watersheds (with drainage areas of 26–55 square miles and mean elevations of 8,031–8,455 feet) on the Wyoming Range in the upper Green River Basin. A machine learning streamflow (MLFLOW) model was calibrated and validated with 971 discrete streamflow observations and 24 static and dynamic predictor variables derived from geospatial and time series data on climatic, physiographic, and anthropogenic characteristics affecting streamflow. The predictor variables were temporally and spatially conditioned to amplify the relation of predictor variables to monthly streamflow.The MLFLOW model had satisfactory agreement between observed and predicted streamflow (coefficient of determination [R2]=0.80, Nash-Sutcliffe efficiency [NSE]=0.79, NSE with log-transformed data [logNSE]=0.82, and percent bias [PBIAS]=0.7 percent). NSE and logNSE indicated the MLFLOW model performed equally well for high and low flows, and PBIAS indicated the MLFLOW model did not overpredict or underpredict monthly streamflow. Streamflow predictions seemed to well represent the annual hydrograph within the study area during the study period.The most important variables (statistically important in the MLFLOW model) for explaining monthly streamflow were temporally and spatially conditioned dynamic climatic variables, mostly precipitation and snow water equivalent. Importance of the static and dynamic variables did not differ substantially among the three watersheds but differed considerably among the 6 years. Monthly streamflow increased with increasing precipitation, snow water equivalent, and drainage area but decreased with increasing forest cover, elevation, evapotranspiration, and temperature.The MLFLOW model was most sensitive to selection of dynamic climatic variables. Unconditioned dynamic climatic variables alone explained 54 percent of the variance (R2=0.54) in monthly streamflow, whereas adding static physiographic and anthropogenic variables only explained 12 percent more of the variance (R2=0.66). Also, spatial conditioning of all variables together with temporal conditioning of dynamic variables increased the variance explained in the MLFLOW model by another 14 percent (R2=0.80). The MLFLOW model also had greater sensitivity to temporal than to spatial differences in the data. For the MLFLOW model trained with observations from all watersheds and years or for models trained with observations from all except one watershed or 1 year left out sequentially, performance was better in testing on observations from each watershed than from each year separately. Also, performance was better for models fitted to fewer sites than to fewer months of observations.The greatest utility of the modeling approach is the ease of use and the speed of processing input data, running the model, and interpreting the model output, whereas the greatest limitation is the need for spatially and temporally representative streamflow observations to drive the model. Although familiarity with R is necessary, only a working knowledge of hydrology (for selecting appropriate predictor variables and evaluating the quality of streamflow observations) and a rudimentary understanding of machine learning models are needed. Therefore, this modeling approach is practicable for other scientists who work with water but who are not hydrologists.


  • Estimates of water use associated with continuous oil and gas development in the Permian Basin, Texas and New Mexico, 2010–19

    by Joshua F. Valder, Ryan R. McShane, Joanna N. Thamke, Jeremy S. McDowell, Grady P. Ball, Natalie A. Houston, Amy E. Galanter

    In 2015, the U.S. Geological Survey started a topical study to quantify water use in areas of continuous oil and gas (COG) development. The first phase of the study was completed in 2019 and analyzed the Williston Basin. The second phase of the study analyzed the Permian Basin using the same techniques and approaches used for the Williston Basin analysis. The Permian Basin was selected for the second phase of water-use analysis for the following reasons: (1) the basin has the largest undiscovered technically recoverable oil and gas resource in the United States, (2) the basin has a continuous resource in tight shale that primarily produces oil, and (3) the basin is within the contiguous United States. This study used data from 60 counties in Texas and New Mexico with spatial coverage based on the Permian Basin extent defined by the U.S. Energy Information Administration, a representation of the geologically defined Permian Basin.Data from several sources were used in the analysis of direct, indirect, and ancillary water use associated with COG development in the Permian Basin and are available in an associated data release. Hydraulic fracturing water-use data were used to determine the start of the recent (before 2019) COG development boom in oil production in the Permian Basin in the same way that the data were used for the Williston Basin study. Water-use data were aggregated by county and year, which were the sampling units used in the analysis.The water-use analysis of the Permian Basin contained three elements: (1) estimates of water use, in million gallons, by county and year; (2) coefficients of water use from regression models, in million gallons per developed oil and gas well; and (3) performance (based on goodness-of-fit metrics) of the regression models in estimating the observed water use.Coefficients from the linear and quantile regression models of direct, indirect, and ancillary water use in the Permian Basin were produced as aggregate values for the counties and years. The mean estimate of direct water use had a 95-percent confidence interval of 4.13–5.45 million gallons (Mgal) per developed oil and gas well. The coefficient from the linear regression model of indirect water use was 0.111 Mgal per well, with a 95-percent confidence interval of 0.104–0.117 Mgal per well. The mean estimate of ancillary water use in the Permian Basin was 1.09 Mgal per well, with a 95-percent confidence interval of 1.05–1.13 Mgal per well. Model performance was evaluated with goodness-of-fit metrics including coefficient of determination (R2), root mean square error, and the ratio of root mean square error to standard deviation of observations computed from leave-one-out cross validation of the linear and quantile regression models of direct, indirect, and ancillary water use. Model performance for direct water use was acceptable, with an R2 value of 0.91. The model performance of indirect water use was acceptable, with an R2 value of 0.89. Values of R2 for the ancillary water-use categories were at least 0.89.Annual mean estimates for hydraulic fracturing, cementing, drilling, indirect, and ancillary water use per well for the years 2010–17 were comparable between the Permian and Williston Basins. Hydraulic fracturing water use increased similarly from 2010 to 2015 in the Permian Basin and the Williston Basin, increasing from 0.6 Mgal per well in 2010 to 5.4 Mgal per well in 2015 in the Permian Basin and from 1.4 Mgal per well in 2010 to 4.7 Mgal per well in 2015 in the Williston Basin.By design, the Permian water-use assessment is a simplification of a complex and continually developing system and therefore has uncertainty and limitations in the interpretation of results. Despite the modeling limitations, the results summarized in the report, when compared to other studies, compare well with water-use estimations. The favorable comparison highlights the transferability of the water-use methodology to other areas of COG development.


  • U.S. Geological Survey science for the Wyoming Landscape Conservation Initiative—2018 annual report

    by Patrick J. Anderson, Cameron L. Aldridge, Jason S. Alexander, Timothy J. Assal, Steven Aulenbach, Zachary H. Bowen, Anna D. Chalfoun, Geneva W. Chong, Holly Copeland, David R. Edmunds, et al.

    The Wyoming Landscape Conservation Initiative (WLCI) was established in 2007 as a collaborative interagency partnership to develop and implement science-based conservation actions. During the past 11 years, partners from U.S. Geological Survey (USGS), State and Federal land management agencies, universities, and the public have collaborated to implement a long-term (more than 10 years) science-based program that assesses and enhances the quality and quantity of wildlife habitats in the southwest Wyoming region while facilitating responsible development. The USGS WLCI Science Team completes scientific research and develops tools that inform and support WLCI partner planning, decision making, and on-the-ground management actions.In fiscal year 2018, the USGS initiated 3 new projects and continued efforts on 21 ongoing science and web-development projects. The first new project was initiated to support Secretarial Order 3362 which calls on the USGS to assist Western States in mapping big-game migration corridors and developing new mapping tools. During 2018, the USGS hosted a workshop in Laramie, Wyoming, which included more than 70 State and Federal wildlife experts from Colorado, New Mexico, Texas, and Wyoming. Most of the mapping and migration tool curricula used in the workshop were derived from prior WLCI studies and mapping efforts of big-game migration movement in habitats undergoing large-scale energy development.The second new project was in response for WLCI partners to better understand sedimentation and hydrogeomorphic processes in a cold-desert headwater and the third new project was designed to improve our approach for people to access, manage, and analyze WLCI data and WLCI resource information. The USGS published 18 products (including peer-reviewed journal articles, USGS series publications, and data releases) and provided more than a dozen professional oral and poster presentations at scientific meetings and numerous informal presentations to WLCI partners at meetings and workshops. This report summarizes the objectives and status of each project and highlights the USGS 2018 accomplishments and products.


  • Open Access

    Estimates of water use associated with continuous oil and gas development in the Williston Basin, North Dakota and Montana, 2007–17

    by Ryan R. McShane, Theodore B. Barnhart, Joshua F. Valder, Seth S. Haines, Kathleen M. Macek-Rowland, Janet M. Carter, Gregory C. Delzer, Joanna N. Thamke

    This study of water use associated with development of continuous oil and gas resources in the Williston Basin is intended to provide a preliminary model-based analysis of water use in major regions of production of continuous oil and gas resources in the United States. Direct, indirect, and ancillary water use associated with development of continuous oil and gas resources in the Williston Basin was estimated in North Dakota and Montana from 2007 to 2017. Water-use data were aggregated by county and year, which were the sampling units used in this analysis. Linear and quantile regression models of water use in relation to the number of oil and gas wells developed were fit for the direct, indirect, and ancillary water-use categories for each State. A 95-percent confidence interval for each parameter estimate from the linear regression models was computed as a measure of uncertainty. Additional information on uncertainty can be gained from modeling other distribution parameters, so quantile regression models of the 5th, 50th, and 95th percentiles also were fit. To assess uncertainty in the estimates from the regression models of direct, indirect, and ancillary water use, leave-one-out cross-validation was used. Model performance was evaluated with three goodness-of-fit metrics used to compare the estimates and observations of water use.Mean annual direct and indirect water use for development of continuous oil and gas resources in North Dakota was estimated at 4,512 million gallons (Mgal) per year (Mgal/yr), with a 95-percent confidence interval of 4,021–5,152 Mgal/yr, and in Montana was estimated at 196 Mgal/yr, with a 95-percent confidence interval of 189–203 Mgal/yr. Ancillary water use (for domestic and public supply) had an estimated annual mean of 2,753 Mgal/yr in North Dakota and 396 Mgal/yr in Montana. The coefficient from the linear regression model of direct water use was 3.86 Mgal per well and hydraulic fracturing water use was 3.70 Mgal per well for North Dakota. The mean estimate of direct water use had a 95-percent confidence interval of 3.48–4.23 Mgal per well. For North Dakota, the coefficient from the linear regression model of indirect water use was 0.453 Mgal per well, with a 95-percent confidence interval of 0.415–0.492 Mgal per well. Direct and indirect water use had a mean estimate of about 4.31 Mgal per well in North Dakota. The mean estimate of ancillary water use (for domestic and public supply) in North Dakota was 2.03 Mgal per well, with a 95-percent confidence interval of 1.76–2.31 Mgal per well. For Montana, the linear regression model of hydraulic fracturing water use had a mean estimate of 2.04 Mgal per well. The 95-percent confidence interval for the mean estimate was 1.80–2.28 Mgal per well. Direct and indirect water use in Montana had a mean estimate of 2.49 Mgal per well. The mean estimate of ancillary water use (for domestic and public supply) in Montana was 2.43 Mgal per well, with a 95-percent confidence interval of 1.76–3.11 Mgal per well.


  • Analytical framework to estimate water use associated with continuous oil and gas development

    by Joshua F. Valder, Ryan R. McShane, Theodore B. Barnhart, Spencer L. Wheeling, Janet M. Carter, Kathleen M. Macek-Rowland, Gregory C. Delzer, Joanna N. Thamke

    An analytical framework was designed to estimate water use associated with continuous oil and gas (COG) development in support of the U.S. Geological Survey Water Availability and Use Science Program. This framework was developed to better understand the relation between the production of COG resources for energy and the amount of water needed to sustain this type of energy development in the United States. The total mean undiscovered, technically recoverable volume of COG has increased, highlighting the continued need to develop approaches to better characterize water use associated with COG development.The analytical framework can be used to estimate water use associated with COG development for three water-use components—direct, indirect, and ancillary water use—that are related to the life cycle of COG development. Direct water use is defined as water used in a wellbore to complete a well, including the water used for drilling, cementing, stimulating, and maintaining the well during production. Indirect water use is the water used at or near the well site, including water used for dust abatement, for cleaning equipment, and for crew and staff use. Ancillary water use is all other water used during the life cycle of COG development that is not categorized as direct or indirect, such as additional local or regional water use resulting from a change (for example, population) related to COG development. The analytical framework includes the data inputs, the processes involved in estimating the water-use coefficients and analyzing their uncertainties, and the outputs. The analytical framework was developed as an R script, which contains the statistical models used to estimate water-use components.The availability of data across COG reservoirs in the United States is variable and presents challenges for estimating water use for extracting COG from their reservoirs; thus, the R script can be modified for the types of data available within a COG reservoir, the extent and resolution of data available for each water-use component, and the desired output of the water-use assessment. The script was written so that the units of the data in the script were standardized. Water-use estimates were simulated for the mean and 10th, 50th, and 90th percentiles of the data distributions. Uncertainties were quantified with confidence intervals for the estimated coefficients. Uncertainty for estimated or simulated data can be calculated with the R script by providing a range of representative values that are within the appropriate confidence intervals of the mean of the data.


  • Open Access

    U.S. Geological Survey science for the Wyoming Landscape Conservation Initiative—2017 annual report

    by Linda C. Zeigenfuss, Ellen Aikens, Cameron L. Aldridge, Patrick J. Anderson, Timothy J. Assal, Zachary H. Bowen, Anna D. Chalfoun, Geneva W. Chong, Cheryl A. Eddy-Miller, Stephen S. Germaine, et al.

    The Wyoming Landscape Conservation Initiative (WLCI) was established in 2008 to address the scientific and conservation questions associated with land use changes because of energy development and other factors in southwest Wyoming. Over the past decade, partners from U.S. Geological Survey (USGS), State and Federal land management agencies, universities, and the public have collaborated to implement a long-term (defined here as more than 10 years), science-based program that assesses and enhances the quality and quantity of wildlife habitats in this region while facilitating responsible development. The USGS Science Team completes scientific research and develops tools that inform and support WLCI partner planning, decision making, and on-the-ground management actions. In fiscal year 2017, USGS published 18 products (including peer-reviewed journal articles, USGS series publications, and data releases), prepared an additional 7 products for publication, and presented 14 talks or posters at professional scientific meetings in addition to numerous informal presentations to WLCI partners at meetings and workshops. In this report, we summarize the science themes that describe USGS science for the WLCI and highlight work completed in fiscal year 2017 for each science theme. We also provide information on how USGS science is being used by land managers to better achieve habitat conservation objectives.