Francesco Gallerano
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Francesco Gallerano has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Giovanni Cannata
Department of Civil, Building and Environmental Engineering, Sapienza University of Rome, 00184 Rome, Italy
14 shared publications - Federica Palleschi
Department of Civil, Constructional and Environmental Engineering, Sapienza University of Rome, 00184 Rome, Italy
5 shared publications - Benedetta Iele
Department of Civil, Constructional and Environmental Engineering, Sapienza University of Rome, 00184 Rome, Italy
4 shared publications - C. Petrelli
Sapienza University of Rome
2 shared publications F. Lasaponara
Department of Civil, Construction and Environmental Engineering, Sapienza University of Rome, Italy
2 shared publicationsE. Pasero
Dipartimento di Ingegneria Idraulica, Trasporti e Strade, Universitá di Roma “La Sapienza”, Roma, Italy
1 shared publication
Latest Publications
- Open Access
- 28 March 2023
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 11 (4) , 735
Numerical Investigation into the Performance of an OWC Device under Regular and Irregular Waves
A numerical investigation into the hydrodynamic efficiency of an oscillating water column (OWC) device for the production of energy from sea waves under the conditions of regular and irregular waves is proposed. The numerical simulations were carried out using a two-dimensional version of a recently published three-dimensional free-surface nonhydrostatic numerical model, which is based on a conservative form of the contravariant Navier–Stokes equations written for a moving co-ordinate system. The governing equations are spatially discretized by a finite volume shock-capturing scheme based on high-order wave-targeted essentially nonoscillatory reconstructions and an exact Riemann solver. Time discretization was performed by a predictor-corrector method that took into account the nonhydrostatic pressure component. The proposed numerical model allowed us to highlight the significant differences between the hydrodynamic efficiency obtained under irregular waves and those obtained under regular monochromatic waves and provides more realistic evaluations of the OWC device performances. The results of the above comparison showed a reduction in the hydrodynamic efficiency of the OWC from 0.78 to about 0.54 when passing from regular waves to the corresponding irregular ones. The model was applied to assess the potential energy production obtainable by a set of OWCs at the Cetraro harbor (southern Italy). The numerical results show that, by adopting the optimal dimensions of the OWC, the estimated mean annual energy production obtainable at the Cetraro harbor is equal to 1540.52 MWh, which corresponds to the energy production of about 10 wind turbines with a nominal power of 60 KW.
- 28 March 2023
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 11 (4) , 735
Open AccessNumerical Investigation into the Performance of an OWC Device under Regular and Irregular Waves
A numerical investigation into the hydrodynamic efficiency of an oscillating water column (OWC) device for the production of energy from sea waves under the conditions of regular and irregular waves is proposed. The numerical simulations were carried out using a two-dimensional version of a recently published three-dimensional free-surface nonhydrostatic numerical model, which is based on a conservative form of the contravariant Navier–Stokes equations written for a moving co-ordinate system. The governing equations are spatially discretized by a finite volume shock-capturing scheme based on high-order wave-targeted essentially nonoscillatory reconstructions and an exact Riemann solver. Time discretization was performed by a predictor-corrector method that took into account the nonhydrostatic pressure component. The proposed numerical model allowed us to highlight the significant differences between the hydrodynamic efficiency obtained under irregular waves and those obtained under regular monochromatic waves and provides more realistic evaluations of the OWC device performances. The results of the above comparison showed a reduction in the hydrodynamic efficiency of the OWC from 0.78 to about 0.54 when passing from regular waves to the corresponding irregular ones. The model was applied to assess the potential energy production obtainable by a set of OWCs at the Cetraro harbor (southern Italy). The numerical results show that, by adopting the optimal dimensions of the OWC, the estimated mean annual energy production obtainable at the Cetraro harbor is equal to 1540.52 MWh, which corresponds to the energy production of about 10 wind turbines with a nominal power of 60 KW.
- Open Access
A New Turbulence Model for Breaking Wave Simulations
In this paper, the hydrodynamic and free surface elevation fields in breaking waves are simulated by solving the integral and contravariant forms of the three-dimensional Navier–Stokes equations that are expressed in a generalized time-dependent curvilinear coordinate system, in which the vertical coordinate moves by following the free surface. A new turbulence model in contravariant form is proposed; in this model, the mixing length, , is defined as a function of the maximum water surface elevation variation. A new original numerical scheme is proposed. The main element of originality of the numerical scheme consists of the proposal of a new fifth-order reconstruction technique for the point values of the conserved variables on the cell face. This technique, named in the paper as WTENO, allows the choice procedure of the reconstruction polynomials for the point values to be modified in a dynamic way.Open AccessA New Turbulence Model for Breaking Wave Simulations
In this paper, the hydrodynamic and free surface elevation fields in breaking waves are simulated by solving the integral and contravariant forms of the three-dimensional Navier–Stokes equations that are expressed in a generalized time-dependent curvilinear coordinate system, in which the vertical coordinate moves by following the free surface. A new turbulence model in contravariant form is proposed; in this model, the mixing length, , is defined as a function of the maximum water surface elevation variation. A new original numerical scheme is proposed. The main element of originality of the numerical scheme consists of the proposal of a new fifth-order reconstruction technique for the point values of the conserved variables on the cell face. This technique, named in the paper as WTENO, allows the choice procedure of the reconstruction polynomials for the point values to be modified in a dynamic way. - Open Access
- 13 June 2022
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 10 (6) , 810
A Wave-Targeted Essentially Non-Oscillatory 3D Shock-Capturing Scheme for Breaking Wave Simulation
A new three-dimensional high-order shock-capturing model for the numerical simulation of breaking waves is proposed. The proposed model is based on an integral contravariant form of the Navier–Stokes equations in a time-dependent generalized curvilinear coordinate system. Such an integral contravariant form of the equations of motion is numerically integrated by a new conservative numerical scheme that is based on three elements of originality: the time evolution of the state of the system is carried out using a predictor–corrector method in which exclusively the conserved variables are used; the point values of the conserved variables on the cell face of the computational grid are obtained using an original high-order reconstruction procedure called a wave-targeted essentially non-oscillatory scheme; the time evolution of the discontinuity on the cell faces is calculated using an exact Riemann solver. The proposed model is validated by numerically reproducing several experimental tests of breaking waves on computational grids that are significantly coarser than those used in the literature to validate the existing 3D shock-capturing models. The results obtained with the proposed model are also compared with those obtained with a previously published model, which is based on second-order total variation diminishing reconstructions and an approximate Riemann solver usually adopted in the existing 3D shock-capturing models. Through the above comparison, the main drawbacks of the existing 3D shock-capturing models and the ability of the proposed model to simulate breaking waves and wave-induced currents are shown. The proposed 3D model is able to correctly simulate the wave height increase in the shoaling zone and to effectively predict the location of the wave breaking point, the maximum wave height, and the wave height decay in the surf zone. The validated model is applied to the simulation of the interaction between breaking waves and an emerged breakwater. The numerical results show that the proposed model is able to simulate both the large-scale circulation patterns downstream of the barrier and the onset of quasi-periodic vortex structures close to the edge of the barrier.
- 13 June 2022
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 10 (6) , 810
Open AccessA Wave-Targeted Essentially Non-Oscillatory 3D Shock-Capturing Scheme for Breaking Wave Simulation
A new three-dimensional high-order shock-capturing model for the numerical simulation of breaking waves is proposed. The proposed model is based on an integral contravariant form of the Navier–Stokes equations in a time-dependent generalized curvilinear coordinate system. Such an integral contravariant form of the equations of motion is numerically integrated by a new conservative numerical scheme that is based on three elements of originality: the time evolution of the state of the system is carried out using a predictor–corrector method in which exclusively the conserved variables are used; the point values of the conserved variables on the cell face of the computational grid are obtained using an original high-order reconstruction procedure called a wave-targeted essentially non-oscillatory scheme; the time evolution of the discontinuity on the cell faces is calculated using an exact Riemann solver. The proposed model is validated by numerically reproducing several experimental tests of breaking waves on computational grids that are significantly coarser than those used in the literature to validate the existing 3D shock-capturing models. The results obtained with the proposed model are also compared with those obtained with a previously published model, which is based on second-order total variation diminishing reconstructions and an approximate Riemann solver usually adopted in the existing 3D shock-capturing models. Through the above comparison, the main drawbacks of the existing 3D shock-capturing models and the ability of the proposed model to simulate breaking waves and wave-induced currents are shown. The proposed 3D model is able to correctly simulate the wave height increase in the shoaling zone and to effectively predict the location of the wave breaking point, the maximum wave height, and the wave height decay in the surf zone. The validated model is applied to the simulation of the interaction between breaking waves and an emerged breakwater. The numerical results show that the proposed model is able to simulate both the large-scale circulation patterns downstream of the barrier and the onset of quasi-periodic vortex structures close to the edge of the barrier.
- Open Access
- 1 July 2020
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 8 (7) , 487
Numerical Study over the Effects of a Designed Submerged Breakwater on the Coastal Sediment Transport in the Pescara Harbour (Italy)
In 1997, in front of the Pescara Harbour (Italy), a detached breakwater was constructed. In the successive years, the sediment transport due to the combined action of waves and coastal currents, in the area between the detached breakwater and the entrance of the Pescara Harbour, produced an accumulation of about of sediment per year. In this paper, the causes of the accretion of the bottom elevation in front of the Pescara Harbour entrance and the effects produced by the existing detached breakwater are investigated. The effects on the sediment transport of the introduction of a new submerged breakwater designed to protect the entrance of the harbour from sediment siltation are investigated. In particular, the ability of the designed submerged breakwater, located orthogonally to the longshore current, to intercept the aforementioned solid material and to significantly reduce the accretion of the bottom in the area in front of the harbour entrance, was numerically verified. Numerical simulations were carried out by means of a model of the bottom-change composed of two sub-models: a two-dimensional phase resolving model that is used to calculate the fluid dynamic variables changing inside the wave period and a second sediment transport sub-model to simulate the bottom changes, in which the suspended sediment concentration is calculated by the wave-averaged advection–diffusion equation. The equations of motion, in which the vector and tensor quantities are expressed in Cartesian components, are written in a generalised curvilinear coordinate system. The fully nonlinear Boussinesq equations are written in an integral form and used to simulate the velocity fields.- 1 July 2020
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 8 (7) , 487
Open AccessNumerical Study over the Effects of a Designed Submerged Breakwater on the Coastal Sediment Transport in the Pescara Harbour (Italy)
In 1997, in front of the Pescara Harbour (Italy), a detached breakwater was constructed. In the successive years, the sediment transport due to the combined action of waves and coastal currents, in the area between the detached breakwater and the entrance of the Pescara Harbour, produced an accumulation of about of sediment per year. In this paper, the causes of the accretion of the bottom elevation in front of the Pescara Harbour entrance and the effects produced by the existing detached breakwater are investigated. The effects on the sediment transport of the introduction of a new submerged breakwater designed to protect the entrance of the harbour from sediment siltation are investigated. In particular, the ability of the designed submerged breakwater, located orthogonally to the longshore current, to intercept the aforementioned solid material and to significantly reduce the accretion of the bottom in the area in front of the harbour entrance, was numerically verified. Numerical simulations were carried out by means of a model of the bottom-change composed of two sub-models: a two-dimensional phase resolving model that is used to calculate the fluid dynamic variables changing inside the wave period and a second sediment transport sub-model to simulate the bottom changes, in which the suspended sediment concentration is calculated by the wave-averaged advection–diffusion equation. The equations of motion, in which the vector and tensor quantities are expressed in Cartesian components, are written in a generalised curvilinear coordinate system. The fully nonlinear Boussinesq equations are written in an integral form and used to simulate the velocity fields. - Open Access
Numerical Modelling of Wave Fields and Currents in Coastal Area
The design and management of coastal engineering, like harbors and coastal defense structures, requires the simulation of hydrodynamic phenomena. This special issue collects five original papers that address state of the art numerical simulations of wave fields and wave-induced velocity fields in coastal areas. The first paper proposes a turbulence model for wave breaking simulation, which is expressed in terms of turbulent kinetic energy and dissipation rate of turbulent kinetic energy (k − ε); the proposed turbulence model is a modification of the standard k − ε turbulence models. The second paper investigates modalities by which wind interacts with wave motion, modifying the wave propagation dynamic. The third paper proposes a study on waves overtopping over coastal barriers. The fourth paper details the numerical simulation of a tsunami wave that propagates over an artificial reservoir, caused by a landslide that creates a solid mass to detach from the slopes and to slide into the reservoir. The fifth paper examines an application case concerning Cetraro harbor (Italy), which is carried out using three-dimensional numerical simulations of wave motion.
Open AccessNumerical Modelling of Wave Fields and Currents in Coastal Area
The design and management of coastal engineering, like harbors and coastal defense structures, requires the simulation of hydrodynamic phenomena. This special issue collects five original papers that address state of the art numerical simulations of wave fields and wave-induced velocity fields in coastal areas. The first paper proposes a turbulence model for wave breaking simulation, which is expressed in terms of turbulent kinetic energy and dissipation rate of turbulent kinetic energy (k − ε); the proposed turbulence model is a modification of the standard k − ε turbulence models. The second paper investigates modalities by which wind interacts with wave motion, modifying the wave propagation dynamic. The third paper proposes a study on waves overtopping over coastal barriers. The fourth paper details the numerical simulation of a tsunami wave that propagates over an artificial reservoir, caused by a landslide that creates a solid mass to detach from the slopes and to slide into the reservoir. The fifth paper examines an application case concerning Cetraro harbor (Italy), which is carried out using three-dimensional numerical simulations of wave motion.
- Open Access
- 24 March 2020
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 8 (3) , 227
3D Numerical Simulation of the Interaction between Waves and a T-Head Groin Structure
The aim of coastal structures for the defense from erosion is to modify the hydrodynamic fields that would naturally occur with the wave motion, to produce zones of sedimentation of solid material, and to combat the recession of the coastline. T-head groin-shaped structures are among the most adopted in coastal engineering. The assessment of the effectiveness of such structures requires hydrodynamic study of the interaction between wave motion and the structure. Hydrodynamic phenomena induced by the interaction between wave motion and T-head groin structures have three-dimensionality features. The aim of the paper is to propose a new three-dimensional numerical model for the simulation of the hydrodynamic fields induced by the interaction between wave fields and coastal structures. The proposed model is designed to represent complex morphologies as well as coastal structures inside the domain. The numerical scheme solves the three-dimensional Navier–Stokes equations in a contravariant formulation, on a time-dependent coordinate system, in which the vertical coordinate varies over time to follow the free-surface elevation. The main innovative element of the paper consists in the proposal of a new numerical scheme that makes it possible to simulate flows around structures with sharp-cornered geometries. The proposed numerical model is validated against a well-known experimental test-case consisting in a wave train approaching a beach (non-parallel with the wave front), with the presence of a T-head groin structure. A detailed comparison between numerical and experimental results is shown.
- 24 March 2020
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 8 (3) , 227
Open Access3D Numerical Simulation of the Interaction between Waves and a T-Head Groin Structure
The aim of coastal structures for the defense from erosion is to modify the hydrodynamic fields that would naturally occur with the wave motion, to produce zones of sedimentation of solid material, and to combat the recession of the coastline. T-head groin-shaped structures are among the most adopted in coastal engineering. The assessment of the effectiveness of such structures requires hydrodynamic study of the interaction between wave motion and the structure. Hydrodynamic phenomena induced by the interaction between wave motion and T-head groin structures have three-dimensionality features. The aim of the paper is to propose a new three-dimensional numerical model for the simulation of the hydrodynamic fields induced by the interaction between wave fields and coastal structures. The proposed model is designed to represent complex morphologies as well as coastal structures inside the domain. The numerical scheme solves the three-dimensional Navier–Stokes equations in a contravariant formulation, on a time-dependent coordinate system, in which the vertical coordinate varies over time to follow the free-surface elevation. The main innovative element of the paper consists in the proposal of a new numerical scheme that makes it possible to simulate flows around structures with sharp-cornered geometries. The proposed numerical model is validated against a well-known experimental test-case consisting in a wave train approaching a beach (non-parallel with the wave front), with the presence of a T-head groin structure. A detailed comparison between numerical and experimental results is shown.
- Open Access
- 30 November 2019
- Published by Springer Nature in Journal of Ocean Engineering and Marine Energy
- Vol. 5 (4) , 419-431
Nonlinear waves and nearshore currents over variable bathymetry in curve-shaped coastal areas
Irregular coastlines and variable bathymetry produce nonlinear effects on wave propagation which play a significant role on the formation of nearshore currents. To protect the coastline from the erosional action of nearshore currents, it is usual to adopt coastal defence works such as submerged breakwaters. If properly designed, they give rise to circulation patterns capable to induce sedimentation of suspended material at the nearshore region. To numerically simulate the hydrodynamic effects of submerged breakwaters in irregular coastal areas, we use a numerical model which is based on an integral contravariant formulation of the three-dimensional Navier–Stokes equations in a time-dependent coordinate system. These equations are numerically solved by a non-hydrostatic shock-capturing numerical scheme which is able to simulate the wave propagation from deep water to the shoreline, including the surf zone and swash zone.
- 30 November 2019
- Published by Springer Nature in Journal of Ocean Engineering and Marine Energy
- Vol. 5 (4) , 419-431
Open AccessNonlinear waves and nearshore currents over variable bathymetry in curve-shaped coastal areas
Irregular coastlines and variable bathymetry produce nonlinear effects on wave propagation which play a significant role on the formation of nearshore currents. To protect the coastline from the erosional action of nearshore currents, it is usual to adopt coastal defence works such as submerged breakwaters. If properly designed, they give rise to circulation patterns capable to induce sedimentation of suspended material at the nearshore region. To numerically simulate the hydrodynamic effects of submerged breakwaters in irregular coastal areas, we use a numerical model which is based on an integral contravariant formulation of the three-dimensional Navier–Stokes equations in a time-dependent coordinate system. These equations are numerically solved by a non-hydrostatic shock-capturing numerical scheme which is able to simulate the wave propagation from deep water to the shoreline, including the surf zone and swash zone.
- Open Access
A Modified k – ε Turbulence Model for a Wave Breaking Simulation
We propose a two-equation turbulence model based on modification of the standard model, for simulation of a breaking wave. The proposed model is able to adequately simulate the energy dissipation due to the wave breaking and does not require any “a priori” criterion to locate the initial wave breaking point and the region in which the turbulence model has to be activated. In order to numerically simulate the wave propagation from deep water to the shoreline and the wave breaking, we use a model in which vector and tensor quantities are expressed in terms of Cartesian components, where only the vertical coordinate is expressed as a function of a time-dependent curvilinear coordinate that follows the free surface movements. A laboratory test is numerically reproduced with the aim of validating the turbulence modified model. The numerical results compared with the experimental measurements show that the proposed turbulence model is capable of correctly estimating the energy dissipation induced by the wave breaking, in order to avoid any underestimation of the wave height.Open AccessA Modified k – ε Turbulence Model for a Wave Breaking Simulation
We propose a two-equation turbulence model based on modification of the standard model, for simulation of a breaking wave. The proposed model is able to adequately simulate the energy dissipation due to the wave breaking and does not require any “a priori” criterion to locate the initial wave breaking point and the region in which the turbulence model has to be activated. In order to numerically simulate the wave propagation from deep water to the shoreline and the wave breaking, we use a model in which vector and tensor quantities are expressed in terms of Cartesian components, where only the vertical coordinate is expressed as a function of a time-dependent curvilinear coordinate that follows the free surface movements. A laboratory test is numerically reproduced with the aim of validating the turbulence modified model. The numerical results compared with the experimental measurements show that the proposed turbulence model is capable of correctly estimating the energy dissipation induced by the wave breaking, in order to avoid any underestimation of the wave height. - Open Access
- 26 September 2019
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 7 (10) , 337
Hydrodynamic Effects Produced by Submerged Breakwaters in a Coastal Area with a Curvilinear Shoreline
A three-dimensional numerical study of the hydrodynamic effect produced by a system of submerged breakwaters in a coastal area with a curvilinear shoreline is proposed. The three-dimensional model is based on an integral contravariant formulation of the Navier-Stokes equations in a time-dependent curvilinear coordinate system. The integral form of the contravariant Navier-Stokes equations is numerically integrated by a finite-volume shock-capturing scheme which uses Monotonic Upwind Scheme for Conservation Laws Total Variation Diminishing (MUSCL-TVD) reconstructions and an Harten Lax van Leer Riemann solver (HLL Riemann solver). The numerical model is used to verify whether the presence of a submerged coastal defence structure, in the coastal area with a curvilinear shoreline, is able to modify the wave induced circulation pattern and the hydrodynamic conditions from erosive to accretive.
- 26 September 2019
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 7 (10) , 337
Open AccessHydrodynamic Effects Produced by Submerged Breakwaters in a Coastal Area with a Curvilinear Shoreline
A three-dimensional numerical study of the hydrodynamic effect produced by a system of submerged breakwaters in a coastal area with a curvilinear shoreline is proposed. The three-dimensional model is based on an integral contravariant formulation of the Navier-Stokes equations in a time-dependent curvilinear coordinate system. The integral form of the contravariant Navier-Stokes equations is numerically integrated by a finite-volume shock-capturing scheme which uses Monotonic Upwind Scheme for Conservation Laws Total Variation Diminishing (MUSCL-TVD) reconstructions and an Harten Lax van Leer Riemann solver (HLL Riemann solver). The numerical model is used to verify whether the presence of a submerged coastal defence structure, in the coastal area with a curvilinear shoreline, is able to modify the wave induced circulation pattern and the hydrodynamic conditions from erosive to accretive.
- Open Access
- 21 August 2018
- Published by Springer Nature in Continuum Mechanics and Thermodynamics
- Vol. 31 (2) , 491-519
Numerical integration of the contravariant integral form of the Navier–Stokes equations in time-dependent curvilinear coordinate systems for three-dimensional free surface flows
- 21 August 2018
- Published by Springer Nature in Continuum Mechanics and Thermodynamics
- Vol. 31 (2) , 491-519
Open AccessNumerical integration of the contravariant integral form of the Navier–Stokes equations in time-dependent curvilinear coordinate systems for three-dimensional free surface flows