Paloma Rodriguez Horche
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Paloma Rodriguez Horche has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Xiaoyong Chen
School of Electrical Engineering and Intelligentization, Songshan Lake High Tech Industrial Development Zone, Dongguan University of Technology, Dongguan, China
8 shared publications Alfredo Martin Minguez
Departamento de Tecnología Electrónica, ETSIT-Universidad Politécnica de Madrid, Spain
4 shared publications- Alfredo Martin-Minguez
UPM, ETS Telecomun, Dept Tecnol Foton, Madrid, Spain
4 shared publications - Antonio Consoli
Instituto de Ciencia de Materiales de Madrid (ICMM), Consejo Superior de Investigaciones Científicas (CSIC), Calle Sor Juana Inés de la Cruz, 3, 28049 Madrid, Spain
4 shared publications Alfredo M. Minguez
Departamento de Tecnología Fotónica y Bioingeniería, ETSIT, Universidad Politécnica de Madrid, Avda. Complutense 30, Madrid 28040, Spain
3 shared publications- Alfredo Martín Minguez
Universidad Politécnica de Madrid
3 shared publications
Latest Publications
- 1 March 2019
- Published by Elsevier in Optics Communications
- Vol. 435, 326-333
Impact on the chirp effect of the shaped electrical-driven current of the directly-modulated 1.VCSEL in an optical fiber link- 1 March 2019
- Published by Elsevier in Optics Communications
- Vol. 435, 326-333
Impact on the chirp effect of the shaped electrical-driven current of the directly-modulated 1.VCSEL in an optical fiber link- 12 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 37 (11) , 2726-2733
Transverse Offset Based Single-Multi-Single Mode Fiber Structure for Vector Rotation Sensing
In this paper, we develop an alternative all-fiber interferometer, which is based on a commercial graded-index multimode fiber mismatch spliced between two single-mode fibers. Compared to the conventional single-multi-single mode fiber structure with all of the fibers perfectly aligned, theoretical analysis shows that more power is coupled into the LP11 mode while less power is coupled into the LP01 mode, resulting in a power balance between these two modes and a higher interference extinction ratio. Experiments have been carried out to evaluate the performance of the proposed structure, and the experimental results show that the extinction ratio in the transmission spectra can be obtained with a value higher than 15 dB. Moreover, the results indicate that the output power of the proposed scheme is polarization dependent. Based on this polarization-dependent behavior, we propose a Michelson interferometer scheme which can be used as a vector rotation sensor providing a sensitivity of approximately 0.0077 nm/degree in the rotation range of 0 to ±180° with a linearity higher than 99%. Our sensor has the advantages of low-cost, simple manufacture and ease of implementation, making it widely used in engineering applications such as shape sensing and structural health monitoring.
- 12 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 37 (11) , 2726-2733
Transverse Offset Based Single-Multi-Single Mode Fiber Structure for Vector Rotation Sensing
In this paper, we develop an alternative all-fiber interferometer, which is based on a commercial graded-index multimode fiber mismatch spliced between two single-mode fibers. Compared to the conventional single-multi-single mode fiber structure with all of the fibers perfectly aligned, theoretical analysis shows that more power is coupled into the LP11 mode while less power is coupled into the LP01 mode, resulting in a power balance between these two modes and a higher interference extinction ratio. Experiments have been carried out to evaluate the performance of the proposed structure, and the experimental results show that the extinction ratio in the transmission spectra can be obtained with a value higher than 15 dB. Moreover, the results indicate that the output power of the proposed scheme is polarization dependent. Based on this polarization-dependent behavior, we propose a Michelson interferometer scheme which can be used as a vector rotation sensor providing a sensitivity of approximately 0.0077 nm/degree in the rotation range of 0 to ±180° with a linearity higher than 99%. Our sensor has the advantages of low-cost, simple manufacture and ease of implementation, making it widely used in engineering applications such as shape sensing and structural health monitoring.
- Open Access
- 1 December 2018
- Published by Elsevier in Results in Physics
- Vol. 11, 975-983
Light source optimizing in a biphotonic vein finder device: Experimental and theoretical analysis
- 1 December 2018
- Published by Elsevier in Results in Physics
- Vol. 11, 975-983
Open AccessLight source optimizing in a biphotonic vein finder device: Experimental and theoretical analysis
- 17 October 2018
- Published by Springer Nature in Optical Review
- Vol. 25 (6) , 663-677
Performance evaluation of 100 and 200-Gb/s WDM PM-QPSK transmission systems: tolerance analysis to the optical link impairments according to the optical carrier shape
- 17 October 2018
- Published by Springer Nature in Optical Review
- Vol. 25 (6) , 663-677
Performance evaluation of 100 and 200-Gb/s WDM PM-QPSK transmission systems: tolerance analysis to the optical link impairments according to the optical carrier shape
- 28 June 2016
- Published by Springer Nature
- p. 35-51
Improvement of Transverse Offset-Based Single-Mode-Multimode-Single-Mode-Fiber Structure for DPSK Signal Demodulation
- 28 June 2016
- Published by Springer Nature
- p. 35-51
Improvement of Transverse Offset-Based Single-Mode-Multimode-Single-Mode-Fiber Structure for DPSK Signal Demodulation
- 1 March 2015
- Published by Elsevier in Optical Fiber Technology
- Vol. 22, 113-120
Analysis of optical signal impairment induced by different types of optical filters in 40Gbps DQPSK and 100Gbps PM-DQPSK systems
- 1 March 2015
- Published by Elsevier in Optical Fiber Technology
- Vol. 22, 113-120
Analysis of optical signal impairment induced by different types of optical filters in 40Gbps DQPSK and 100Gbps PM-DQPSK systems
- 1 January 2015
- Published by INSTICC
- p. 13-19
DPSK Signals Demodulation Based on a Graded-index Multimode Fiber Mismatch Spliced between Two Single-mode Fibers
- 1 January 2015
- Published by INSTICC
- p. 13-19
DPSK Signals Demodulation Based on a Graded-index Multimode Fiber Mismatch Spliced between Two Single-mode Fibers
- 17 July 2014
- Published by SPIE-Intl Soc Optical Eng
- p. 92891S-92891S-5
Web-based interactive educational software introducing semiconductor laser dynamics: Sound of Lasers (SOL)
- 17 July 2014
- Published by SPIE-Intl Soc Optical Eng
- p. 92891S-92891S-5
Web-based interactive educational software introducing semiconductor laser dynamics: Sound of Lasers (SOL)
- 1 June 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 35-40
Analysis of signal impairment and crosstalk penalty induced by different types of optical filters in 100 Gbps PM-DQPSK based systems
Optical filters are crucial elements in optical communication networks. Their influence toward the optical signal will affect the communication quality seriously. In this paper we will study and simulate the optical signal impairment and crosstalk penalty caused by different kinds of filters, which include Butterworth, Bessel, Fiber Bragg Grating (FBG) and Fabry-Perot (F-P). Signal impairment from filter concatenation effect and crosstalk penalty from out-band and in-band are analyzed from Q-penalty, eye opening penalty (EOP) and optical spectrum. The simulation results show that signal impairment and crosstalk penalty induced by the Butterworth filter is the minimum among these four types of filters. Signal impairment caused by filter concatenation effect shows that when center frequency of all filters is aligned perfectly with the laser's frequency, 12 50-GHz Butterworth filters can be cascaded, with 1-dB EOP. This value is reduced to 9 when the center frequency is misaligned with 5 GHz. In the 50-GHz channel spacing DWDM networks, total Q-penalty induced by a pair of Butterworth filters based demultiplexer and multiplexer is lower than 0.5 dB when the filter bandwidth is in the range of 42-46 GHz.
- 1 June 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 35-40
Analysis of signal impairment and crosstalk penalty induced by different types of optical filters in 100 Gbps PM-DQPSK based systems
Optical filters are crucial elements in optical communication networks. Their influence toward the optical signal will affect the communication quality seriously. In this paper we will study and simulate the optical signal impairment and crosstalk penalty caused by different kinds of filters, which include Butterworth, Bessel, Fiber Bragg Grating (FBG) and Fabry-Perot (F-P). Signal impairment from filter concatenation effect and crosstalk penalty from out-band and in-band are analyzed from Q-penalty, eye opening penalty (EOP) and optical spectrum. The simulation results show that signal impairment and crosstalk penalty induced by the Butterworth filter is the minimum among these four types of filters. Signal impairment caused by filter concatenation effect shows that when center frequency of all filters is aligned perfectly with the laser's frequency, 12 50-GHz Butterworth filters can be cascaded, with 1-dB EOP. This value is reduced to 9 when the center frequency is misaligned with 5 GHz. In the 50-GHz channel spacing DWDM networks, total Q-penalty induced by a pair of Butterworth filters based demultiplexer and multiplexer is lower than 0.5 dB when the filter bandwidth is in the range of 42-46 GHz.
- Open Access
- 1 June 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 312, 18-22
DPSK signals demodulation based on a multimode fiber with a central dip
Differential Phase Shift Keying (DPSK) modulation format has been shown as a robust solution for next-generation optical transmission systems. One key device enabling such systems is a delay interferometer, converting the phase modulation signal into the intensity modulation signal to be detected by the photodiodes. Usually, a standard Mach-Zehnder interferometer (MZI) is used for demodulating a DPSK signal. In this paper, we develop an MZI which is based on all-fiber Multimode Interference (MI) structure: a multimode fiber (MMF) with a central dip, located between two single-mode fibers (SMFs) without any transition zones. The MI based MZI (MI-MZI) is more stable than the standard MZI as the two arms share the same MMF, reducing the impact of the external effects, such as temperature and others. Performance of this MI-MZI is analyzed theoretically and experimentally from transmission spectrum. Experimental results shows that high interference extinction ratio is obtained, which is far higher than that obtained from a normal graded-index based MI-MZI. Finally, by software simulation, we demonstrate that our proposed MI-MZI can be used for demodulating a 40 Gbps DPSK signal. The performance of the MI-MZI based DPSK receiver is analyzed from the sensitivity. Simulation results show that sensitivity of the proposed receiver is about -22.3 dBm for a BER of 10 -15 and about -23.8 dBm for a BER of 10 -9 .
- 1 June 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 312, 18-22
Open AccessDPSK signals demodulation based on a multimode fiber with a central dip
Differential Phase Shift Keying (DPSK) modulation format has been shown as a robust solution for next-generation optical transmission systems. One key device enabling such systems is a delay interferometer, converting the phase modulation signal into the intensity modulation signal to be detected by the photodiodes. Usually, a standard Mach-Zehnder interferometer (MZI) is used for demodulating a DPSK signal. In this paper, we develop an MZI which is based on all-fiber Multimode Interference (MI) structure: a multimode fiber (MMF) with a central dip, located between two single-mode fibers (SMFs) without any transition zones. The MI based MZI (MI-MZI) is more stable than the standard MZI as the two arms share the same MMF, reducing the impact of the external effects, such as temperature and others. Performance of this MI-MZI is analyzed theoretically and experimentally from transmission spectrum. Experimental results shows that high interference extinction ratio is obtained, which is far higher than that obtained from a normal graded-index based MI-MZI. Finally, by software simulation, we demonstrate that our proposed MI-MZI can be used for demodulating a 40 Gbps DPSK signal. The performance of the MI-MZI based DPSK receiver is analyzed from the sensitivity. Simulation results show that sensitivity of the proposed receiver is about -22.3 dBm for a BER of 10 -15 and about -23.8 dBm for a BER of 10 -9 .