Mattia Alberto Lucchini
Research Subjects
Mattia Alberto Lucchini has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Fabio Canepa
Department of Chemistry and Industrial Chemistry, University of Genoa, 16146 Genoa, Italy
6 shared publications - Andrea Testino
Paul Scherrer Institute
5 shared publications - Paola Riani
Department of Chemistry and Industrial Chemistry, University of Genoa, Genoa, Italy, Italy
5 shared publications - Christian Ludwig
École Polytechnique Fédérale de Lausanne (EPFL)
4 shared publications - Anastasios Kambolis
Paul Scherrer Institut, CH-5232 Villigen PSI, Switzerland
3 shared publications - Antonio Cervellino
Paul Scherrer Institute
2 shared publications
Latest Publications
- 10 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Biomedical Circuits and Systems
- Vol. 19 (3) , 616-628
GAPses: Versatile Smart Glasses for Comfortable and Fully-Dry Acquisition and Parallel Ultra-Low-Power Processing of EEG and EOG
Recent advancements in head-mounted wearable technology are revolutionizing the field of biopotential measurement, but the integration of these technologies into practical, user-friendly devices remains challenging due to issues with design intrusiveness, comfort, reliability, and data privacy. To address these challenges, this paper presents GAPSES, a novel smart glasses platform designed for unobtrusive, comfortable, and secure acquisition and processing of electroencephalography (EEG) and electrooculography (EOG) signals.We introduce a direct electrode-electronics interface within a sleek frame design, with custom fully dry soft electrodes to enhance comfort for long wear. The fully assembled glasses, including electronics, weigh 40 g and have a compact size of 160 mm × 145 mm. An integrated parallel ultra-low-power RISC-V processor (GAP9, Greenwaves Technologies) processes data at the edge, thereby eliminating the need for continuous data streaming through a wireless link, enhancing privacy, and increasing system reliability in adverse channel conditions. We demonstrate the broad applicability of the designed prototype through validation in a number of EEG-based interaction tasks, including alpha waves, steady-state visual evoked potential analysis, and motor movement classification. Furthermore, we demonstrate an EEG-based biometric subject recognition task, where we reach a sensitivity and specificity of 98.87% and 99.86% respectively, with only 8 EEG channels and an energy consumption per inference on the edge as low as 121 μJ. Moreover, in an EOG-based eye movement classification task, we reach an accuracy of 96.68% on 11 classes, resulting in an information transfer rate of 94.78 bit/min, which can be further increased to 161.43 bit/min by reducing the accuracy to 81.43%. The deployed implementation has an energy consumption of 40 μJ per inference and a total system power of only 12.4 mW, of which only 1.61% is used for classification, allowing for continuous operation of more than 22 h with a small 75 mAh battery.
- 10 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Biomedical Circuits and Systems
- Vol. 19 (3) , 616-628
GAPses: Versatile Smart Glasses for Comfortable and Fully-Dry Acquisition and Parallel Ultra-Low-Power Processing of EEG and EOG
Recent advancements in head-mounted wearable technology are revolutionizing the field of biopotential measurement, but the integration of these technologies into practical, user-friendly devices remains challenging due to issues with design intrusiveness, comfort, reliability, and data privacy. To address these challenges, this paper presents GAPSES, a novel smart glasses platform designed for unobtrusive, comfortable, and secure acquisition and processing of electroencephalography (EEG) and electrooculography (EOG) signals.We introduce a direct electrode-electronics interface within a sleek frame design, with custom fully dry soft electrodes to enhance comfort for long wear. The fully assembled glasses, including electronics, weigh 40 g and have a compact size of 160 mm × 145 mm. An integrated parallel ultra-low-power RISC-V processor (GAP9, Greenwaves Technologies) processes data at the edge, thereby eliminating the need for continuous data streaming through a wireless link, enhancing privacy, and increasing system reliability in adverse channel conditions. We demonstrate the broad applicability of the designed prototype through validation in a number of EEG-based interaction tasks, including alpha waves, steady-state visual evoked potential analysis, and motor movement classification. Furthermore, we demonstrate an EEG-based biometric subject recognition task, where we reach a sensitivity and specificity of 98.87% and 99.86% respectively, with only 8 EEG channels and an energy consumption per inference on the edge as low as 121 μJ. Moreover, in an EOG-based eye movement classification task, we reach an accuracy of 96.68% on 11 classes, resulting in an information transfer rate of 94.78 bit/min, which can be further increased to 161.43 bit/min by reducing the accuracy to 81.43%. The deployed implementation has an energy consumption of 40 μJ per inference and a total system power of only 12.4 mW, of which only 1.61% is used for classification, allowing for continuous operation of more than 22 h with a small 75 mAh battery.
- Open Access
- 11 August 2017
- Published by MDPI AG in Proceedings
- Vol. 1 (4) , 418
ZnO/SnO2 Heterojunctions Sensors with UV-Enhanced Gas-Sensing Properties at Room Temperature
We report herein the efficiency of microwave-assisted synthesis for obtaining ZnO/SnO2 heterostructures for room-temperature gas-sensing applications. The sensing performances of the traditional oxide materials have been found for applications above 200 °C. However, these temperatures were here reduced to room temperature by considering sensing activity photoactivated by UV light, even for ppb ozone (O3) levels. The heterojunctions exhibited a fast response, total reversibility, and selectivity to oxidizing gases, especially O3 gas. This investigation provides an efficient way to obtain heterostructures exhibiting remarkable properties for practical applications as O3 gas sensor devices.
- 11 August 2017
- Published by MDPI AG in Proceedings
- Vol. 1 (4) , 418
Open AccessZnO/SnO2 Heterojunctions Sensors with UV-Enhanced Gas-Sensing Properties at Room Temperature
We report herein the efficiency of microwave-assisted synthesis for obtaining ZnO/SnO2 heterostructures for room-temperature gas-sensing applications. The sensing performances of the traditional oxide materials have been found for applications above 200 °C. However, these temperatures were here reduced to room temperature by considering sensing activity photoactivated by UV light, even for ppb ozone (O3) levels. The heterojunctions exhibited a fast response, total reversibility, and selectivity to oxidizing gases, especially O3 gas. This investigation provides an efficient way to obtain heterostructures exhibiting remarkable properties for practical applications as O3 gas sensor devices.
- 3 April 2017
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 82 (3) , 739-747
Tailoring the phase of Li–Al–O nanoparticles by nonaqueous sol–gel chemistry
- 3 April 2017
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 82 (3) , 739-747
Tailoring the phase of Li–Al–O nanoparticles by nonaqueous sol–gel chemistry
- 1 November 2015
- Published by Elsevier in Materials Letters
- Vol. 158, 333-338
Phase-resolved particle size distribution: New insight into material characterization
- 1 November 2015
- Published by Elsevier in Materials Letters
- Vol. 158, 333-338
Phase-resolved particle size distribution: New insight into material characterization
- Open Access
Continuous Polyol Synthesis of Metal and Metal Oxide Nanoparticles Using a Segmented Flow Tubular Reactor (SFTR)
Over the last years a new type of tubular plug flow reactor, the segmented flow tubular reactor (SFTR), has proven its versatility and robustness through the water-based synthesis of precipitates as varied as CaCO3, BaTiO3, Mn(1−x)NixC2O4·2H2O, YBa oxalates, copper oxalate, ZnS, ZnO, iron oxides, and TiO2 produced with a high powder quality (phase composition, particle size, and shape) and high reproducibility. The SFTR has been developed to overcome the classical problems of powder production scale-up from batch processes, which are mainly linked with mass and heat transfer. Recently, the SFTR concept has been further developed and applied for the synthesis of metals, metal oxides, and salts in form of nano- or micro-particles in organic solvents. This has been done by increasing the working temperature and modifying the particle carrying solvent. In this paper we summarize the experimental results for four materials prepared according to the polyol synthesis route combined with the SFTR. CeO2, Ni, Ag, and Ca3(PO4)2 nanoparticles (NPs) can be obtained with a production rate of about 1–10 g per h. The production was carried out for several hours with constant product quality. These findings further corroborate the reliability and versatility of the SFTR for high throughput powder production.
Open AccessContinuous Polyol Synthesis of Metal and Metal Oxide Nanoparticles Using a Segmented Flow Tubular Reactor (SFTR)
Over the last years a new type of tubular plug flow reactor, the segmented flow tubular reactor (SFTR), has proven its versatility and robustness through the water-based synthesis of precipitates as varied as CaCO3, BaTiO3, Mn(1−x)NixC2O4·2H2O, YBa oxalates, copper oxalate, ZnS, ZnO, iron oxides, and TiO2 produced with a high powder quality (phase composition, particle size, and shape) and high reproducibility. The SFTR has been developed to overcome the classical problems of powder production scale-up from batch processes, which are mainly linked with mass and heat transfer. Recently, the SFTR concept has been further developed and applied for the synthesis of metals, metal oxides, and salts in form of nano- or micro-particles in organic solvents. This has been done by increasing the working temperature and modifying the particle carrying solvent. In this paper we summarize the experimental results for four materials prepared according to the polyol synthesis route combined with the SFTR. CeO2, Ni, Ag, and Ca3(PO4)2 nanoparticles (NPs) can be obtained with a production rate of about 1–10 g per h. The production was carried out for several hours with constant product quality. These findings further corroborate the reliability and versatility of the SFTR for high throughput powder production.
- 1 May 2015
- Published by American Scientific Publishers in Journal of Nanoscience and Nanotechnology
- Vol. 15 (5) , 3530-3539
One-Pot Polyol Synthesis of Pt/CeO2 and Au/CeO2 Nanopowders as Catalysts for CO Oxidation
The facile one-pot synthesis of CeO2-based catalysts has been developed to prepare a relatively large amount of nanopowders with relevant catalytic activity towards CO oxidation. The method consists of a two-steps process carried out in ethylene glycol: in the first step, 5 nm well-crystallized pure CeO2 is prepared. In a subsequent second step, a salt of a noble metal is added to the CeO2 suspension and the deposition of the noble metal on the nanocrystalline CeO2 is induced by heating. Two catalysts were prepared: Pt/CeO2 and Au/CeO2. The as-prepared catalysts, the thermally treated catalysts, as well as the pure CeO2, are characterized by XRD, TGA, XPS, FTIR, HR-TEM, STEM, particle size distribution, and N2-physisorption. In spite of the identical preparation protocol, Au and Pt behave in a completely different way: Au forms rather large particles, most of them with triangular shape, easily identifiable and dispersed in the CeO2 matrix. In contrast, Pt was not identified as isolated particles. The high resolution X-ray diffraction carried out on the Pt/CeO2 thermally treated sample (500 °C for 1 h) shows a significant CeO2 lattice shrinkage, which can be interpreted as an at least partial incorporation of Pt into the CeO2 crystal lattice. Moreover, only Pt2+ and Pt4+ species were identified by XPS. In literature, the incorporation of Pt into the CeO2 lattice is supported by first-principle calculations and experimentally demonstrated only by combustion synthesis methods. To the best of our knowledge this is the first report where ionically dispersed Pt into the CeO2 lattice is obtained via a liquid synthesis method. The thermally treated Pt/CeO2 sample revealed good activity with 50% CO conversion at almost room temperature.
- 1 May 2015
- Published by American Scientific Publishers in Journal of Nanoscience and Nanotechnology
- Vol. 15 (5) , 3530-3539
One-Pot Polyol Synthesis of Pt/CeO2 and Au/CeO2 Nanopowders as Catalysts for CO Oxidation
The facile one-pot synthesis of CeO2-based catalysts has been developed to prepare a relatively large amount of nanopowders with relevant catalytic activity towards CO oxidation. The method consists of a two-steps process carried out in ethylene glycol: in the first step, 5 nm well-crystallized pure CeO2 is prepared. In a subsequent second step, a salt of a noble metal is added to the CeO2 suspension and the deposition of the noble metal on the nanocrystalline CeO2 is induced by heating. Two catalysts were prepared: Pt/CeO2 and Au/CeO2. The as-prepared catalysts, the thermally treated catalysts, as well as the pure CeO2, are characterized by XRD, TGA, XPS, FTIR, HR-TEM, STEM, particle size distribution, and N2-physisorption. In spite of the identical preparation protocol, Au and Pt behave in a completely different way: Au forms rather large particles, most of them with triangular shape, easily identifiable and dispersed in the CeO2 matrix. In contrast, Pt was not identified as isolated particles. The high resolution X-ray diffraction carried out on the Pt/CeO2 thermally treated sample (500 °C for 1 h) shows a significant CeO2 lattice shrinkage, which can be interpreted as an at least partial incorporation of Pt into the CeO2 crystal lattice. Moreover, only Pt2+ and Pt4+ species were identified by XPS. In literature, the incorporation of Pt into the CeO2 lattice is supported by first-principle calculations and experimentally demonstrated only by combustion synthesis methods. To the best of our knowledge this is the first report where ionically dispersed Pt into the CeO2 lattice is obtained via a liquid synthesis method. The thermally treated Pt/CeO2 sample revealed good activity with 50% CO conversion at almost room temperature.
- 1 September 2014
- Published by Elsevier in Applied Catalysis B: Environment and Energy
- Vol. 156-157, 404-415
Continuous synthesis of nickel nanopowders: Characterization, process optimization, and catalytic properties
- 1 September 2014
- Published by Elsevier in Applied Catalysis B: Environment and Energy
- Vol. 156-157, 404-415
Continuous synthesis of nickel nanopowders: Characterization, process optimization, and catalytic properties
- 20 August 2014
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 53 (17) , 9166-9173
New Approach for the Step by Step Control of Magnetic Nanostructure Functionalization
This paper describes the synthesis, functionalization, and multitechnique analysis of magnetic nanoparticles. The synthetic method involves the covering of a magnetite nucleus by a silica layer and the further functionalization with different fluorophores via a cross-linker molecule. All synthetic intermediates were analyzed by fluorescence spectroscopy and AC magnetic susceptibility. For one of the considered molecules, a further investigation with STEM, EDXS, and DLS has been conducted in order to validate the proposed magnetic results. The comparison between the two techniques is used to ensure a complete characterization of the product confirming the success of the synthesis. By comparing the magnetic and the fluorescence measurements, we also demonstrate the effectiveness of AC susceptibility as a robust and versatile technique to follow the synthesis of complex magnetic nanostructures regardless of the nature of the functionalization.
- 20 August 2014
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 53 (17) , 9166-9173
New Approach for the Step by Step Control of Magnetic Nanostructure Functionalization
This paper describes the synthesis, functionalization, and multitechnique analysis of magnetic nanoparticles. The synthetic method involves the covering of a magnetite nucleus by a silica layer and the further functionalization with different fluorophores via a cross-linker molecule. All synthetic intermediates were analyzed by fluorescence spectroscopy and AC magnetic susceptibility. For one of the considered molecules, a further investigation with STEM, EDXS, and DLS has been conducted in order to validate the proposed magnetic results. The comparison between the two techniques is used to ensure a complete characterization of the product confirming the success of the synthesis. By comparing the magnetic and the fluorescence measurements, we also demonstrate the effectiveness of AC susceptibility as a robust and versatile technique to follow the synthesis of complex magnetic nanostructures regardless of the nature of the functionalization.
- 1 March 2014
- Published by Elsevier in Journal of Molecular Catalysis A: Chemical
- Vol. 383-384, 10-16
Unsupported versus alumina-supported Ni nanoparticles as catalysts for steam/ethanol conversion and CO2 methanation
- 1 March 2014
- Published by Elsevier in Journal of Molecular Catalysis A: Chemical
- Vol. 383-384, 10-16
Unsupported versus alumina-supported Ni nanoparticles as catalysts for steam/ethanol conversion and CO2 methanation