MSMonika Sharma

Monika Sharma

*This is an algorithmically generated author record based on publicly available information.

Monika Sharma has a total of 53 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Ultrasonication Induced Engineering of Emulsion Stability for Developing Advanced Oleic Acid Microencapsulated Phase Change Material ( PCM ) Systems

    by Naveen Jose, Menon Rekha Ravindra, Heartwin Amaladhas Pushpadass, Monika Sharma, Laxmana N. Naik, Krishnegowda Rajesh, Spoorthy G. Sadashivappa

    The present study investigated the effect of the ultrasonication assisted emulsification process on the stability of the oleic acid‐based‐oil‐in‐water emulsions for developing calcium carbonate based microencapsulated phase change materials (MEPCM). The effects of ultrasonic power, treatment time, and surfactant concentration on particle size, zeta potential, and emulsion stability index (ESI) were optimized using a Taguchi L9 orthogonal array coupled with ANOVA. The optimum conditions (80% ultrasonic power, 10 min treatment time, and 1.5 wt% surfactant concentration) yielded particle size of 174 nm, zeta potential of −36 mV and ESI of 95%. Stable MEPCM were synthesized through in situ precipitation and FTIR, XRD, SEM and EDX analysis confirmed the successful encapsulation of oleic acid within compact shell of CaCO 3 consisting of calcite and vaterite phases. DSC analysis confirmed phase change characteristics retention after encapsulation, with ultrasonication‐treated MEPCM exhibiting melting temperature of 12.9°C and latent heat of fusion of 22.29 J/g. The encapsulated systems showcased moderate encapsulation efficiency (32.56%), and high thermal storage capability (97.95%). Thermal cycling studies revealed excellent thermal reliability with 91.97% latent heat retention after 200 heating–cooling cycles. Ultrasonication‐treated MEPCM displayed lower breakage rate (2.34%), lower leakage rate (1.56%) and higher actual core loading (45.28%) in comparison to untreated samples. Thermal conductivity was significantly enhanced from 0.146 W/m K for pure oleic acid to 1.064 W/m K after encapsulation due to the thermally conductive CaCO 3 shell. The results confirm that ultrasonication assisted emulsion engineering is an effective strategy for developing thermally and structurally stable MEPCM for passive thermal energy storage applications.

  • Ready to reconstitute foxtail millet pudding mix: Preparation and characterization for structural, morphological, physico-chemical, textural and sensory attributes

    by Pritee Sanjay Sutar, Sharma Monika, Menon R. Ravindra, Devaraja Hosapalya Chikkathimmaiah, Vivek Gautam, Ameenabenazir P, Gaurav Sharma

    Pudding is a sweet dessert known for its soft texture and thick consistency. Foxtail millet can be used for preparation of pudding for everyday indulgence and nutrition. However, the preparation of pudding remains time consuming as the pre-cooking of millets is a lengthy process. Therefore, developing a convenient pudding mix using the millet will further present an opportunity for commercialization with an industry-friendly approach. Dry crystallization can be used for developing high-quality mixes with improved appearance, reconstitution, and sensory attributes while extending shelf life and enabling mechanization. Present work aimed to optimize the formulation of foxtail millet pudding mix. Millet, sugar and milk solids’ levels varied from 20 to 25%, 65–72% and 8–12%, respectively. The descriptive sensory scores for browning intensity, sweet odour, mouthfeel, sweet flavour, nutty flavour and caramelized flavour ranged between 8.6–9.3, 8.3–9.2, 8.3–9.4, 8.4–9.4, 8.5–9.3 and 8.4–9.2, respectively for the 19 experimental samples. The hardness and fracturability varied from 109.17 N to 145.93 N and 28.02 N to 47.43 N, respectively. The L* and whiteness index values ranged from 87.69 to 94.08 and 81.48 to 86.72, respectively. The cubic models were significant ( p < .05) for colour and appearance, body and texture, flavour and overall acceptability scores, while quadratic model was significant ( p < .05) for the sweetness score. Optimized formulation of the pudding mix comprised of 20.24% millet, 67.76% sugar, and 12% milk solids with 0.95 desirability. Crystallinity index of the pudding mix was 61.56%. Fourier transform infrared spectroscopy identified characteristic peaks for carbohydrates, proteins, and sugars in the pudding mix, confirming the presence of all ingredients without any new functional bonds. The scanning electron micrographs revealed nucleation and growth rate disparities in the pudding mix.

  • Effect of Dry Blending and Dry Crystallization Process on Properties of Poppy Seed Based Milk Pudding ( Payasam ) Mix

    by Amrik Harzra, B. Pandya Rahulkumar, Naveen Jose, S. Supreetha, Menon Rekha Ravindra, Monika Sharma, H. C. Devaraja

    The process methodology used for preparing a ready‐to‐reconstitute dry mix, that is, dry crystallization and dry blending is likely to influence the product characteristics such as morphological, engineering and sorption properties. This study is aimed to deliver valuable insights into the significant changes that occur during dry crystallization and their impact on product characteristics. Dry blending (DBP) and dry‐crystallization (DCP) approaches were attempted to formulate instant dry‐mix of poppy seed based milk pudding. Scanning electron micrographs showed fused, crystalline grease‐coated particles after dry‐crystallization. X‐ray diffractogram depicted sharp peaks of crystalline sucrose in DCP samples and percent crystallinity was 72.94% against 52.64% in dry‐blended mix. The Fourier Transformed Infrared Spectroscopy (FTIR) spectra of both the samples showed peaks at 987 and 1048 cm −1 with greater absorption for DCP sample. DBP sample showed higher values of thermal conductivity ( k ) compared to DCP. DBP sample exhibited glass transition onset temperature ( T on ) at 36.69°C; while the heating curve of DCP showed a shift in the heating curve at 20.66°C. Dry‐crystallization resulted in higher flowability and lower hygroscopicity compared to dry‐blending while, both dry‐mixes followed Type III moisture sorption isotherm. Three parameter modified Mizrahi model was found as best fit to describe sorption data. It is concluded that dry‐crystallization is a superior alternative to dry blending for developing poppy seed payasam mix. These findings will help guide appropriate packaging materials and engineering processes for these products.

  • Optimizing quality and mixing performance of processed cheese spread using a mechanical universal disperser

    by Rupesh Prabhudas Datir, Menon Rekha Ravindra, M. Manjunatha, Monika Sharma

    Processed cheese spread (PCS) is currently experiencing rapid growth and is recognised as a prominent segment within the cheese‐based product industry worldwide. This type of cheese spread is produced by comminuting and blending natural cheese of varying ages and degrees of maturity, along with other ingredients, to achieve a homogeneous plastic mass. The high viscosity of PCS necessitates thorough mixing and blending, posing a challenge for cheese processors. In this study, a mechanical unit known as a universal disperser was utilised to prepare PCS. The study aimed to evaluate the impact of different processing parameters on the quality of the final product. Response surface methodology (RSM) was employed to design the experiment and optimise the process accordingly. The experiment involved conducting trials at three distinct melting temperatures: 50, 65 and 80 °C. The impeller speed used for blending the content was set at three levels: 10 000, 15 000 and 20 000 r.p.m. Responses, such as mixing index, mixing time, power consumption, spreadability, and overall acceptability, were recorded. Based on the findings, it was concluded that by employing the optimal parameters, a high‐quality PCS with a desirable overall acceptability score of 8.3 could be achieved while also meeting the desired mixing performance.


  • Green extraction of phospholipids from ghee residue using pulsed electric field processing: Process optimisation and analysis of structural and compositional parameters

    by Rajesh Krishnegowda, Monika Sharma, Menon Rekha Ravindra

    Process parameters were optimised using Taguchi orthogonal array design for extraction of phospholipids (PLs) from ghee residue (GR) with pulsed electric field (PEF) assistance. For higher PL yield and antioxidant activity, process voltage and time were observed to be significant factors. Optimised conditions were determined as 60 kV/cm voltage at 7.5 (v/w) solvent (water)‐to‐solid ratio for 5 min. Physical disruption of GR matrix due to PEF treatment was established through scanning electron micrographs. Lipidomic profile of the extract ascertained through liquid chromatography‐mass spectrophotometry (LC–MS) revealed multiple species of phosphatidylcholine, phosphatidylethanolamine, phosphatidylinositol and phosphatidylserine in the resultant extract.


  • Open Access

    Incorporation of coconut milk residue in pasta: Influence on cooking quality, sensory and physical properties

    by P. P. Shameena Beegum, Monika Sharma, M. R. Manikantan, R. Pandiselvam, R. K. Gupta

    A study was conducted to explore the potentiality of coconut milk residue (CMR) for cold extrusion (pasta preparation). Proximate analysis revealed that coconut milk residue is a rich source of crude fibre (24.03%) in addition to crude fat (41.55%), crude protein (5%), total carbohydrates (26.24%) and ash content (0.97%) at 2.23 per cent moisture. The effect of coconut milk residue upon replacing durum wheat semolina on cooking qualities, colour parameters, textural property and overall sensory acceptability of pasta samples were evaluated. Incorporation of coconut milk residue significantly influenced the observed parameters (P<0.01). Cooking time was unaffected by incorporating milk residue up to 10 per cent (P<0.05). Though the addition of residue increased the gruel loss (0.84 to 1.34%), the per cent loss was below the technologically acceptable limit (0.05). Thus, the study recommends incorporating 10 per cent coconut milk residue in durum wheat semolina for pasta preparation. Moreover, the entrepreneurs engaged in the coconut milk/milk powder and virgin coconut oil industry would be benefitted by adopting this venture, wherein they would be able to fetch huge additional income by placing their residue product on an upgraded fast-moving consumer good (FMCG) value chain.


  • Open Access

    Temporal changes in the physicochemical, textural and sensory attributes of butter fortified with vegetarian source of omega-3 fatty acid

    by Vishal S Pandule, Monika Sharma, Devaraja Hc, Menon Rekha Ravindra, B Surendra Nath

    Fortification of butter with omega-3 fatty acids and alpha linolenic acid results in higher level of unsaturated fatty acids. This may affect the oxidative stability of butter. Therefore, the present study was conducted to evaluate the impact of storage on the physico-chemical, textural and sensory attributes of the fortified butter samples packed in polypropylene cups and stored at 5 and -18 °C. The samples were analysed for 90 days with an interval of 15 days. During the storage, the samples were analysed for physico-chemical properties, oxidative stability, textural characteristics, sensory characteristics and microbial quality. Control sample showed higher (4.35 h) induction period than samples prepared by adding flaxseed oil (2.36 h) and flaxseed oil emulsion (2.56 h) as studied by rancimat. Peroxide value, free fatty acids and TBA value increased significantly (P<0.05) during storage however, the values were within the acceptable range. The optimized butter samples were examined for storage stability under refrigeration and frozen conditions for 90 days. Firmness, work of shear and yield stress increased slightly during the storage and samples stored at -18ºC showed higher values than refrigerated storage. Even though, overall sensory acceptability decreased significantly (P<0.05) during the storage and the samples stored at -18ºC showed higher score than refrigerated storage; it was still above 7.5 on 9 point hedonic scale. No microbial growth was observed throughout the storage period. Thus, it is concluded that omega-3 fatty acid fortification doesn’t adversely affect the storage stability of fortified butter and the butter has good sensorial acceptability and oxidative stability for 90 days of storage period.

  • Open Access

    Egg quality in different lines of New Hampshire and Giriraja chicken

    by N Baskota, M Sharma, N Bhattrai, D Neupane, Rk Yadav, S Upreti

    This study was undertaken to evaluate the egg quality parameters of New Hampshire and Giriraja by maintaining four different flocks (lines) of New Hampshire viz. NH-Khajura, NH-Parwanipur, NH-Khumaltar and NH-Pokhara and three different flocks (lines) of Giriraja viz. GR-Pakhribas, GR-Khumaltar and GR-Tarhara. The 40-60 weeks of hatchability, fertility, external and internal egg quality parameters were studied and recorded. A total of 200 birds (40 weeks of age) of each New Hampshire and Giriraja from each line were maintained on deep litter system. Results from this study indicated the significant effect of genotype and respective lines on fertility and hatchability of eggs. Significant (PPPPPPPBang. J. Anim. Sci. 2020. 49 (2): 108-118